2 Quick Questions - Here's the 1st!!

Simply - can I put HTML into my site? Thanks

The procedure for adding external HTML to your iWeb pages is basically the same whether you are adding ad banners or weather readouts or other javascript web gadgets. Here is a recent thread in which I have listed out the basic step-by-step procedure...
http://discussions.apple.com/thread.jspa?messageID=2446725
Of course, if you have any questions, feel free to ask here in the forums or you can even contact me directly via email or iChat (see my site: http://www.dirtdoog.com on the blog page for contact info). Good luck!

Similar Messages

  • When I type in a question here, all the posts say they were written in 1969!  What's with that?

    When I type in a question here, all the posts say they were written in 1969!  What's with that?

    Hello, try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

    So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

    This is a user to user technical support forum.  It is not our responsibility to convince you of anything.
    Do you actually have a technical support question?  If not, post your question on a blog or somewhere more appropriate.
    Best,
    GDG

  • Pre-Ordered my S4 will it be here on the 1st of June?

    Like the title says I pre-ordered my s4 pretty pumped about it and wondering if it'll be here on June 1st or will it be later.

    PHEW You scared me for a moment there JRH4054 LOL. I almost thought I couldnt buy any screen protectors at all for my S4.  I just pulled up my Droid Razr (1st line) Ice Cream Sandwich Manual for the phone I've had 2 yrs and had always used Screen protectors and heres what I found:
    Note:
    Your touchscreen might stay dark if the sensor just above it is covered. Don't use covers or screen protectors (even clear ones) that cover this sensor
    and well thankfully I  havent had any issues

  • A quick question concerning replacing the DVD drive in a HP pavillion dv6-2057cl

    I need to replace the DVD drive in this dv6 and I am wondering if there is any wiggle room when it comes to the replacement drive.  Can I use another HP disc drive with a similar model # or am I restricted to the "identical" drive?
    Some quick info follows:
    OS = Windows 7 home premieum (32bit)
    The drive pulled out of the laptop:
    Super Multi DVD Rewriter
    MODEL: GT20L
    FW        : DC05
    HW       : A2
    TYPE    : AMCK702
    CT : 7AXVK012GY3NRY
    HP mPC PN : 461646-6C2
    S/N :
    {Removed for privacy}
    MANUFACTURED : OCTOBER 2008
    I have found a replacement with the same "Model #" and same "HP mPC PN" however it was manufactured in 2009 and I do not know if the placement of the SATA connection on the rear of the drive matches up or not.
    Any help is much appreciated!!!!!!
    Thank you,
    DaFlash
    This question was solved.
    View Solution.

    It looks like the part number is the same. As long as the part number is the same, it is essentially the same part and should work without any issues. The only time that part may not work is if the part number is different. If any part is different from another part (firmware, hardware, etc.), it will have a different part number. As long as 461646-6C2 is the same on both, there shouldn't be any issue with replacing the drive.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Article Quality Question: Writing from the 1st person perspective

    Hi guys,
    Hope that you all had a good festive break.  I've got a question for any of the TechNet Quality control group when they're around.  It's relating to article perspective.
    I've started an article series regarding CodePlex products for SharePoint (on this
    link) and have in the past removed any first person perspectives as to make it as general as possible.  It later struck me that this is somewhat misaligned as any review article is going to be viewed through the experience of the guy playing with the
    goods.
    So, whilst I appreciate that the TechNet wiki is mostly full of technical How to do and best practice guides, I'm wanting to add a different type of article to the wiki that can be referred too when people perhaps see that a CodePlex project doesn't have
    a great deal of literature.
    My question is, on that basis, would it be acceptable for me to write in a first person perspective just for these articles?
    Many thanks,
    Steven
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

    Hi Richard
    I've seem some wiki article authors use them, but that's only typically when the article has been rushed or not formatted properly.  I'm not against removing it entirely but just wanted to check in.
    Thanks for your response.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • HT1451 We forgot the security questions to make the 1st purchase on this device.. Where can I go to fun that?

    We forgot the security quetions to make the first purchase on this devise.. Where can I go to find them?

    Hi Travis47,
    Thanks for visiting Apple Support Communities.
    See this article for help with resetting your security questions:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Best,
    Jeremy

  • Quick question: what is the difference between graphic and movie clips?

    What is the difference between the two symbols: graphic and movie clips? They both contain frames..?

    movie clips can have
    instance names : so they can be controlled via actionscript
    filters applied : drop shadow, glow, blur, color adjust etc
    blend modes applied : difference, screen, lighten, darken, etc.
    3d transformations
    graphics:
    none of the above
    the only real practical reason to use a graphic is the reason jdehaan stated. a graphics internal animation can be scrubbed via the main timeline. graphics will only advance when the main timeline advances. when the main timeline stops.. graphics stops.
    movieclips on the otherhand are said to run independent of the main timeline. so you can have a MAIN timeline with one frame only and the movieclip's interior animation will run constantly.
    also via the properties panel you can tell a graphic to stay stuck on a certain frame or loop a set number of times.
    always use movieclips unless you have a reason not too. as kglad said it will save you and others a lot of hurt in the future.

  • Quick question, where to put global variables

    Very quick question:
    where is the best place to put global variables,
    (e.g. a flag that turns on debug mode)
    if they are needed by the entire application?
    I'm guessing they should be placed in their own class.
    But should I make them public static final constants,
    and just do Globals.MYCONSTANT
    OR should i do "implements Globals" in all my other classes?
    The first way seems simpler and more logical,
    but in the examples for JSDT, they use the second technique.
    Any thoughts?
    thanks! =)

    I would suggest either creating a properties file for your globals, or adding them to the system properties at startup. Placing items like debugging tags in your code means that you have to change the code, recompile, and rejar before your change is implemented. Using system properties means that you simply have to change your command-line options (i.e., from -Dmyapp.debug=true to -Dmyapp.debug=false).
    Shaun

  • Installing OBIEE on Windows 7, quick questions

    Dear Experts,
    Last year, I struggled installing OBIEE on Linux 5.5.
    Now I want to install it on Windows 7 Ultimate.
    It will be stand alone, for my own use only.
    Both a client, and a server.
    Some quick questions:
    1)
    Does the Windows server need to have a Domain (as Linux did)?
    (I'm having some trouble with the same dummy domain that worked fine
    in Linux, since it doesn't exist on the web.)
    2)
    Does the Windows server/client require a loopback adapter?
    If so, does it require a static IP?
    3)
    Does the windows server/client require a static IP address?
    4)
    If static IP addresses are required for both 2 and 3,
    is the static IP address supposed to match, or be different?
    I hope these questions aren't too dumb. But I haven't found
    anything online addressing them for windows yet.
    Thanks a lot!

    Hi,
    1)
    Does the Windows server need to have a Domain (as Linux did)?
    (I'm having some trouble with the same dummy domain that worked fine
    in Linux, since it doesn't exist on the web.)
    A. Not required.
    2)
    Does the Windows server/client require a loopback adapter?
    If so, does it require a static IP?
    A. Yes it is require for Loopback adapter and static ip for installation -- Client installation is not required -- You can go for Simple installation in your laptop.
    3)
    Does the windows server/client require a static IP address?
    A. Yes
    4)
    If static IP addresses are required for both 2 and 3,
    is the static IP address supposed to match, or be different?
    A.
    Please refer my blog.
    http://satyaobieesolutions.blogspot.in/2012/06/obiee-11.html
    Please verify the below steps.
    1. Please check whether are download 64 bit software or not.
    2. First you have to install jrockit-jdk1.6.0_31-r28.2.3-4.1.0
    3. before installing software you have to give full permissions to everyone on your installation location drive (C drive or D drive).
    4.Create Looppack Adapter.
    5. Database installation 11g 64 bit.
    6. RCU 32 bit
    7. OBIEE 11.1.1.6 64 bit
    Hope this help's
    Thanks,
    Satya

  • Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
    https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8

  • TS3297 Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?!(for 1st time purchase)

    Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase)  I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • Quick Question: When to use ( ) and when to use [ ] and why the ( *)

    Hi all,
    A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
    I get that you use the [ ] brackets when you want something specific from an object, i.e.
    [ textField textColor ]
    and that you use ( ) brackets for things like:
    if ( x == y) {
    But I get confused when I see things like:
    NSLog(@"some text here");
    Why does that get ( ) brackets and why is it not [ ].
    Also another point of confusion, creating methods... Why are some methods done like:
    - (void)awakeFromNib
    And others done like (with the additional "*" added):
    - (NSString *)stringvalue
    As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
    Thanks in advance!

    Adam:
    As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
    \[myObject doSomething\];
    The other use square for brackets have is to index C-style arrays, such as:
    aValue = anArray\[10\]; // Get the 10-element of an array
    However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
    Parenthesis in expressions are used to group and prioritize, such as:
    x = 10 * (3 + 5); // x = 80
    If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
    The other important use of parenthesis is in calling a C function:
    result = foo(3);
    means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
    And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
    \- \(void\)returnNothing;
    \- (int)returnInteger;
    Other methods return pointers to types, like:
    \- (int \*)returnPointerToInteger;
    \- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
    Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
    \- (NSString *)makeAString;
    The method above returns a pointer to an NSString rather than the entire object.
    Good luck with your learning,
    Juan-Pablo
    Message was edited by: Juan Pablo Claude

  • Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update softdate" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

    Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

    You need to upgrade OS X.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

Maybe you are looking for