2's complement of double
Hello,
I need to convert a signed double to a two's complement hex string that is 4 bytes long. How do I go about doing this?
Thanks.
msimone wrote:
I will try those. But honestly this was the quickest way for me to get it into the format that the hardware will accept. How do I take a negative number and get a two's complement of it?
Thanks
Two's complement is a format. It's a way of storing values. You're not converting anything. Numbers are already stored in two's complement format, so you do not need to do anything.
Perhaps you should read up on two's complement: http://en.wikipedia.org/wiki/Two%27s_complement#Calculating_two.27s_complement
Attachments:
two's complement.png 12 KB
Similar Messages
-
JAVA arithmetic problem with double ?
If I try to work double precision numbers I get a unintelligible result, but what do I do wrong ?
Are there any inaccuracy in the JAVA double precision numbers arithmetic or what's the problem with this very simple example code ? How can I get correct result ?
Simple example code :
================
for (double i = 0; i < 10; i = i + 0.01)
System.out.println(i);
On the output :
===========
0.0
0.01
0.02
0.03
0.04
0.05
0.060000000000000005
0.07
0.08
0.09
0.09999999999999999
0.10999999999999999
0.11999999999999998
0.12999999999999998
0.13999999999999999
0.15
0.16
0.17
0.18000000000000002
0.19000000000000003
0.20000000000000004
0.21000000000000005
0.22000000000000006
0.23000000000000007
0.24000000000000007
0.25000000000000006
0.26000000000000006
0.2700000000000001
0.2800000000000001
0.2900000000000001
0.3000000000000001
0.3100000000000001
0.3200000000000001
0.3300000000000001
0.34000000000000014
0.35000000000000014
0.36000000000000015
0.37000000000000016
0.38000000000000017
0.3900000000000002
0.4000000000000002
0.4100000000000002
0.4200000000000002
0.4300000000000002
0.4400000000000002
0.45000000000000023
0.46000000000000024
0.47000000000000025
0.48000000000000026
0.49000000000000027
0.5000000000000002
0.5100000000000002
0.5200000000000002
0.5300000000000002
0.5400000000000003
0.5500000000000003
0.5600000000000003
0.5700000000000003
0.5800000000000003
0.5900000000000003
0.6000000000000003
0.6100000000000003
0.6200000000000003
0.6300000000000003
0.6400000000000003
0.6500000000000004
0.6600000000000004
0.6700000000000004
0.6800000000000004
0.6900000000000004
0.7000000000000004
0.7100000000000004
0.7200000000000004
0.7300000000000004
0.7400000000000004
0.7500000000000004
0.7600000000000005
0.7700000000000005
0.7800000000000005
0.7900000000000005
0.8000000000000005
0.8100000000000005
0.8200000000000005
0.8300000000000005
0.8400000000000005
0.8500000000000005
0.8600000000000005
0.8700000000000006
0.8800000000000006
0.8900000000000006
0.9000000000000006
0.9100000000000006
0.9200000000000006
0.9300000000000006
0.9400000000000006
0.9500000000000006
0.9600000000000006
0.9700000000000006
0.9800000000000006
0.9900000000000007
1.0000000000000007
1.0100000000000007
1.0200000000000007
1.0300000000000007
1.0400000000000007
1.0500000000000007
1.0600000000000007
1.0700000000000007
1.0800000000000007
1.0900000000000007
1.1000000000000008
1.1100000000000008
1.1200000000000008
1.1300000000000008
1.1400000000000008
1.1500000000000008
1.1600000000000008
1.1700000000000008
1.1800000000000008
1.1900000000000008
1.2000000000000008
1.2100000000000009
1.2200000000000009
1.2300000000000009
1.2400000000000009
1.2500000000000009
1.260000000000001
1.270000000000001
1.280000000000001
1.290000000000001
1.300000000000001
1.310000000000001
1.320000000000001
1.330000000000001
1.340000000000001
1.350000000000001
1.360000000000001
1.370000000000001
1.380000000000001
1.390000000000001
1.400000000000001
1.410000000000001
1.420000000000001
1.430000000000001
1.440000000000001
1.450000000000001
1.460000000000001
1.470000000000001
1.480000000000001
1.490000000000001
1.500000000000001
1.5100000000000011
1.5200000000000011
1.5300000000000011
1.5400000000000011
1.5500000000000012
1.5600000000000012
1.5700000000000012
1.5800000000000012
1.5900000000000012
1.6000000000000012
1.6100000000000012
1.6200000000000012
1.6300000000000012
1.6400000000000012
1.6500000000000012
1.6600000000000013
1.6700000000000013
1.6800000000000013
1.6900000000000013
1.7000000000000013
1.7100000000000013
1.7200000000000013
1.7300000000000013
1.7400000000000013
1.7500000000000013
1.7600000000000013
1.7700000000000014
1.7800000000000014
1.7900000000000014
1.8000000000000014
1.8100000000000014
1.8200000000000014
1.8300000000000014
1.8400000000000014
1.8500000000000014
1.8600000000000014
1.8700000000000014
1.8800000000000014
1.8900000000000015
1.9000000000000015
1.9100000000000015
1.9200000000000015
1.9300000000000015
1.9400000000000015
1.9500000000000015
1.9600000000000015
1.9700000000000015
1.9800000000000015
1.9900000000000015
2.0000000000000013
2.010000000000001
2.020000000000001
2.0300000000000007
2.0400000000000005
2.0500000000000003
Thanks for answerers !
JosephThis result is entirely unsurprising, and the flaw lies in your program, not in Java.
Java represents numbers in 2's complement [SEM] form (read the Java Language Specification (JLS), according to agreed standards. When you specify a fractional number that appears to be nice and easy to work with, you are thinking in decimal notation, not binary, and you are giving it a number that cannot be precisely represented. It is a little like asking you to write down exactly what pi is (all its digits ;-)).
So the number you get is not precisely what you asked for (one very insignificant error). But then you compound it by adding an inaccurately represented number to an inaccurately represented number, and so on, until the bit errors combine to make a very inaccurate number.
The correct way to approach what you are trying to do would be to perform the addition using integers, and multiply each time you want to scale it to a double.
This has been asked many times - I would suggest you:
- Search the forums
- Check out the language spec
- or do a degree in CompSci :-)
A calculator is a little more accurate because it does not have to conform to agreed standards, and so can use special logic to minimise such errors. The average pocket calulator also works to a much lower level of accuracy (usu 8 digits), and therefore masks the errors to you. You'd find that you got the same effect if you played with it long enough.
Hope this helps -
Howto when i have very very large double array
I have code my program about document retrieval.
I create double array in size [10000]x[8000] for keep value for calculte someting in only memory (about metrix operation).
I have set parameter to heap memory size at 1024m but it not enough, it has exception out of memory.
I use Notebook that have RAM 1G. Is this cause for exception?
Please help me to lead solution for my case.
Thank you.anurag.kapur wrote:
A couple of points:
1. Your notebook has 1 GB of RAM and you are allocating 1024 MB (=1 GB) to the JVM heap, which is not possible, as you need some space for running various other Operating System processes as well.This is a good point. There are also things in the JVM itself other than the Java object heap that need space. Thread stacks, loaded classes, native libraries, etc.
2. Why have you allocated 1024 MB to the JVM heap? Did you choose any random number (obviously with some degree of educated guess)?
Your array size is 10000 * 8000 = 8 * 10^7
Thus total heap memory required = 8 * 10^7 * 4 Bytes [The int data type is a 32-bit signed two's complement integer]
= 320 * 10^6 Bytes
= 320 MBExcept that peterdog1234 said that the array was an array of doubles, at 8 bytes each, so about 640MB are needed for the array. If the algorithms allow the loss of range and precision, maybe the array could be an array of floats, not doubles. That would keep the array in about 320MB. That would help with the space requirements, but might be slower as all the operations will have to expand the floats to be operated on as doubles, then converted back to floats for storage in the array. But on some architectures that's not too bad.
I would use -XX:+PrintGCDetails to see how the heap has been partitioned into young generation (fast allocation and collection) and old generation (relatively long-lived data). You might have to reshape the heap to have at least 640MB in the old generation, and then whatever you can fit as the young generation, leaving some of your 1GB for the rest of the JVM, other programs running on the box, the operating system, etc. Maybe "-Xms768m -Xmx768m -XX:NewSize=64m -XX:MaxNewSize=64m" would be a good compromise. That gives you a 768MB Java object heap, with 64MB in the young generation and 704MB in the old generation, leaving 256MB (1GB-768MB) for "other things". Whether that works depends on now many other long-lived Java objects you have. But -XX:+PrintGCDetails will tell you that, too. -
depuis la dernière mise à jour de firefox, un problème apparait sur un forum personnel.
I'm not sure that I understand how you see that scrolling text on that page.<br />
Do you see that text double on two lines?
Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).<br />
Make sure that you choose an unique name for the image to avoid problems with an already existing image with the same name.
Clear the cache and remove the cookies from websites that cause problems<br />
Outils > Options > Avancé > Réseau > Cache > Vider le cache maintenant<br />
Outils > Options > Vie privée > Cookies > Afficher les cookies<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Outils > Modules Complémentaires).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Cuevana extension problem, doesn't appear complements in preferences
Everytime I open Firefox appear a window that says: cuevanatv.asia, I have read blogs where say that I have to delete cuevana extension but in preference doesn't appear the tab of complements.
I also can't open Firefox in safe mode because when I try to open help appears again the tab of cuevanatv.asia.
I already delete Firefox and installed again but that doesn't work.You can use one of these to start Firefox in <u>Safe Mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Bonjour,
Je suis en train de développer une interface qui devra être affichée sur deux écrans de PC de la manière suivante :
- un premier écran affichera l'interface complète, à des fins de tests et maintenance ;
- un deuxième écran affichera une interface similaire mais épurée de toutes les commandes et indicateurs qui ne sont pas utiles pour l'utilisation de base de l'IHM.
Par exemple :
- le bouton "Stop Application" se retrouvera sur l'interface complète ET sur l'interface déportée ;
- le bouton "Start Test" se trouvera uniquement sur l'interface complète et ne devra pas être visible dans l'interface déportée.
Ce que je voudrais éviter, c'est dédoubler les commandes et indicateurs (ça ne sert à rien d'avoir 2 boutons "Stop Application") pour ne pas surcharger le diagramme.
J'ai pensé à une solution toute simple : customiser chaque commande qui doit être déportée, en dédoublant l'image du bouton de sorte à ce qu'elle apparaisse 2 fois sur la face-avant, mais 1 fois sur l'écran principal et 1 fois sur l'écran déporté.
J'aimerais savoir si c'est le meilleur moyen de faire cela, ou s'il y a un autre moyen de "déporter" ou "doubler" la FA, sans doubler le diagramme ?
Merci de vos retours,
Cordialement,
cecileAiro
Solved!
Go to Solution.Non au contraire Cécile,
Les FGV (functional Global variable) sont selon moi bien meilleur car elles vous permettent de créer un moteur d'action (code dans chaque état) et aussi d'éviter les situations de compétition.
Cependant dans votre cas il suffit de récupérer la référence d'un clone. Etant donné que c'est juste de la lecture, une variable globale suffit amplement.
Pour être sûr que l'on se synchronise sur le terme de FGV voici deux liens:
http://forums.ni.com/t5/LabVIEW/Community-Nugget-4-08-2007-Action-Engines/td-p/503801
http://www.ni.com/white-paper/7517/en
et le meilleur pour la fin: http://zone.ni.com/devzone/cda/epd/p/id/6375
Cordialement,
http://forums.ni.com/t5/LabVIEW/Community-Nugget-4-08-2007-Action-Engines/td-p/503801
Romain DUVAL || Application Engineer Specialist ||Certified LabVIEW Architect (CLA) || Certified TestStand Architect (CTA)
National Instruments France -
Reporting Level The Value will Double....
Hi Friends,
IN BI 7.O I Build MultiProvider Based on DSO And CUBE.Here My DSO is Standard and the same DSO Fields are Mapped in to CUBE also.Here My Query Also Standard Query Under DSO,But I copied to Multiprovider.When i execute the Query the Value will be Double.Please let me know the solution for this.
Thanx & Regards,
Raghavendra Bellam.Hi,
As you are aware that a Multiprovider perform a union operation on data from all the objects underneath it.
If your Query selection fullfil the criteria from the cube as well as DSO the key figure value would be double.
One solution is to provide a variable/Filter for the infoprovider in the query to get result from only one of them.
Hope this solves.
Regards,
Karan -
Sales quote layout rows doubled in crystal report layout
Dear All,
Sales quote layout rows doubled in crystal report layout.
In sales quote layout the rows are doubled. Even in the standard layout. If the quote contains only two rows. Then it is doubled as 4 rows in the crystal report layout.
It is happening in the particular database. Other database are working fine. I request you people to help me to overcome this issue.
Regards,
SivaHi Siva,
If this is regarding CR in SAP B1 then please repost to the SAP Business One Application space.
-Abhilash -
SSRS Report Returning Double Quote string from a Single Quote String
Hi, I'm getting weird thing in resultset from SSRS report when executed. When I pass parameter to a report, which passes String that has single quote value to a split function , it returns rows with double quote.
For example following string:
'N gage, Wash 'n Curl,Murray's, Don't-B-Bald
Returns:
''N gage, Wash ''n Curl,Murray''s, Don''t-B-Bald
through SSRS report.
Here is the split function Im using in a report.
CREATE Function [dbo].[fnSplit] (
@List varchar(8000),
@Delimiter char(1)
Returns @Temp1 Table (
ItemId int Identity(1, 1) NOT NULL PRIMARY KEY ,
Item varchar(8000) NULL
As
Begin
Declare @item varchar(4000),
@iPos int
Set @Delimiter = ISNULL(@Delimiter, ';' )
Set @List = RTrim(LTrim(@List))
-- check for final delimiter
If Right( @List, 1 ) <> @Delimiter -- append final delimiter
Select @List = @List + @Delimiter -- get position of first element
Select @iPos = Charindex( @Delimiter, @List, 1 )
While @iPos > 0
Begin
-- get item
Select @item = LTrim( RTrim( Substring( @List, 1, @iPos -1 ) ) )
If @@ERROR <> 0 Break -- remove item form list
Select @List = Substring( @List, @iPos + 1, Len(@List) - @iPos + 1 )
If @@ERROR <> 0 Break -- insert item
Insert @Temp1 Values( @item ) If @@ERROR <> 0 Break
-- get position pf next item
Select @iPos = Charindex( @Delimiter, @List, 1 )
If @@ERROR <> 0 Break
End
Return
End
FYI: I'm getting @List value from a table and passing it as a string to split function.
Any help would be appreciated!
ZKAnother user from TSQL forum posted this code which is returning the same resultset but when I execute both codes in SQL server it works and return single quote as expected.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8d5c96f5-c498-4f43-b2fb-284b0e83b205/passing-string-which-has-single-quote-rowvalue-to-a-function-returns-double-quoate?forum=transactsql
CREATE FUNCTION dbo.splitter(@string VARCHAR(MAX), @delim CHAR(1))
RETURNS @result TABLE (id INT IDENTITY, value VARCHAR(MAX))
AS
BEGIN
WHILE CHARINDEX(@delim,@string) > 0
BEGIN
INSERT INTO @result (value) VALUES (LEFT(@string,CHARINDEX(@delim,@string)-1))
SET @string = RIGHT(@string,LEN(@string)-CHARINDEX(@delim,@string))
END
INSERT INTO @result (value) VALUES (@string)
RETURN
END
GO
ZK -
Double click on field in ALV Report
hi everyone
i have written a program which displays data in an alv grid report, now i need to extend my program a bit more.
when i double click on any field value the corresponding record should be displayed
can anyone suggest if i need to call any fn module for this, if so wht's the fn module
if anyone can give an example that would be fine
Cheers,
ramaHi,
*& Report Z_REPORTFROMKNA1ANDT005T
REPORT Z_REPORTFROMKNA1ANDT005T
LINE-SIZE 180
MESSAGE-ID ZZ.
TABLES:EKKO.
TYPE-POOLS : SLIS.
Internal table for ALV
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, "Field catalog
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV, "WA for Field catalog
IT_EVENT TYPE SLIS_T_EVENT, "events
WA_EVENT TYPE SLIS_ALV_EVENT, "WA for events
IT_COMMENT TYPE SLIS_T_LISTHEADER, "Header details
WA_COMMENT TYPE SLIS_LISTHEADER, "WA for header details
WA_LAYOUT TYPE SLIS_LAYOUT_ALV, "Layout
IT_SORT TYPE SLIS_T_SORTINFO_ALV, "Sort table
WA_SORT TYPE SLIS_SORTINFO_ALV, "WA for sort table
IT_KEYINFO TYPE SLIS_KEYINFO_ALV. "Pass key value
DATA : V_REPID LIKE SY-REPID.
V_REPID = SY-REPID.
DATA : V_DATE LIKE SY-DATUM.
color management.
DATA : IT_COLOR TYPE TABLE OF LVC_S_SCOL. "Color management.
Internal table declearation
DATA:BEGIN OF IT_EKKO OCCURS 0,
EBELN LIKE EKKO-EBELN,
BUKRS LIKE EKKO-BUKRS,
AEDAT LIKE EKKO-AEDAT,
END OF IT_EKKO.
DATA : BEGIN OF IT_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
NETWR LIKE EKPO-MENGE,
chk(1) type c,
END OF IT_EKPO.
DATA : BEGIN OF IT_EKBE OCCURS 0,
EBELN LIKE EKBE-EBELN,
EBELP LIKE EKBE-EBELP,
BELNR LIKE EKBE-BELNR,
MENGE LIKE EKBE-MENGE,
MATNR LIKE EKBE-MATNR,
END OF IT_EKBE.
DATA : BEGIN OF IT_FINAL OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
NETWR LIKE EKPO-NETWR,
LINE_COLOR(4) TYPE C, "Used to store row color attributes
END OF IT_FINAL.
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:S_EBELN FOR EKKO-EBELN.
PARAMETERS : RB1 RADIOBUTTON GROUP G1 MODIF ID Z1,
RB2 RADIOBUTTON GROUP G1 MODIF ID Z2,
RB3 RADIOBUTTON GROUP G1 MODIF ID Z3.
SELECTION-SCREEN END OF BLOCK BLK.
AT SELECTION-SCREEN OUTPUT.
PERFORM MODIFY_SCREEN.
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM GET_ALV.
*& Form modify_screen
text
--> p1 text
<-- p2 text
FORM MODIFY_SCREEN .
IF RB1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'Z1' .
SCREEN-INVISIBLE = 1.
SCREEN-ACTIVE = 0.
ELSE.
SCREEN-INVISIBLE = 0.
SCREEN-ACTIVE = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDFORM. " modify_screen
*& Form GET_DETAILS
Get the details
FORM GET_DETAILS .
DATA: LD_COLOR(1) TYPE C.
SELECT EBELN
BUKRS
AEDAT
FROM EKKO
INTO TABLE IT_EKKO
WHERE EBELN IN S_EBELN.
IF SY-SUBRC = 0.
SORT IT_EKKO BY EBELN.
ELSE.
MESSAGE E000 WITH 'DATA NOT FOUND'.
ENDIF.
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELN
EBELP
MATNR
MENGE
MEINS
NETPR
NETWR
chk
FROM EKPO
INTO TABLE IT_EKPO
FOR ALL ENTRIES IN IT_EKKO
WHERE EBELN = IT_EKKO-EBELN.
IF SY-SUBRC = 0.
SORT IT_EKPO BY EBELN.
ENDIF.
ENDIF.
LOOP AT IT_EKPO.
IT_FINAL-EBELN = IT_EKPO-EBELN.
IT_FINAL-EBELP = IT_EKPO-EBELP.
IT_FINAL-MATNR = IT_EKPO-MATNR.
IT_FINAL-MENGE = IT_EKPO-MENGE.
IT_FINAL-MEINS = IT_EKPO-MEINS.
IT_FINAL-NETPR = IT_EKPO-NETPR.
IT_FINAL-NETWR = IT_EKPO-NETWR.
ON CHANGE OF IT_FINAL-EBELN.
LD_COLOR = 7.
CONCATENATE 'C' LD_COLOR '10' INTO IT_FINAL-LINE_COLOR.
ENDON.
APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDLOOP.
ENDFORM. " GET_DETAILS
*& Form GET_ALV
text
FORM GET_ALV .
PERFORM GENERATE_FIELDCAT.
PERFORM GENERATE_LAYOUT.
PERFORM GENERATE_EVENTS.
PERFORM GENERATE_SORT.
PERFORM ALV_GRID_DISPLAY.
ENDFORM. " GET_ALV
*& Form GENERATE_FIELDCAT
Field catalog
FORM GENERATE_FIELDCAT .
IF RB1 = 'X' OR RB2 = 'X'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'PO Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'Item Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-edit = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'Material Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-COL_POS = '4'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'PO Quantity'.
WA_FIELDCAT-LOWERCASE = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '5'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'Order unit'.
WA_FIELDCAT-LOWERCASE = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-COL_POS = '6'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'Net price'.
WA_FIELDCAT-LOWERCASE = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-COL_POS = '7'.
WA_FIELDCAT-JUST = 'C'.
WA_FIELDCAT-SELTEXT_L = 'Net order value'.
WA_FIELDCAT-LOWERCASE = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
wa_fieldcat-fieldname = 'CHK'.
wa_fieldcat-col_pos = '8'.
wa_fieldcat-just = 'C'.
wa_fieldcat-seltext_l = 'Check Box'.
wa_fieldcat-lowercase = 'X'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-edit = 'X'.
append wa_fieldcat to it_fieldcat.
ELSE.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_EKKO'
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER = I_BYPASSING_BUFFER
I_BUFFER_ACTIVE = I_BUFFER_ACTIVE
CHANGING
CT_FIELDCAT = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_EKPO'
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = V_REPID
I_BYPASSING_BUFFER = I_BYPASSING_BUFFER
I_BUFFER_ACTIVE = I_BUFFER_ACTIVE
CHANGING
CT_FIELDCAT = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " GENERATE_FIELDCAT
*& Form GENERATE_EVENTS
Generate Events
FORM GENERATE_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
IMPORTING
ET_EVENTS = IT_EVENT
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF NOT IT_EVENT[] IS INITIAL.
READ TABLE IT_EVENT INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY IT_EVENT FROM WA_EVENT INDEX SY-TABIX.
ENDIF.
<b> READ TABLE IT_EVENT INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
WA_EVENT-FORM = 'IT_USER_COMMAND'.
MODIFY IT_EVENT FROM WA_EVENT INDEX SY-TABIX.
ENDIF.</b>
ENDIF.
ENDFORM. " GENERATE_EVENTS
*& Form TOP_OF_PAGE
TOP_OF_PAGE
FORM TOP_OF_PAGE.
DATA : V_CONCATE(50) TYPE C.
DATA : V_SPACE(10) TYPE C.
CONCATENATE 'VIKRANTH' 'RAJESH' INTO V_CONCATE.
WA_COMMENT-TYP = 'S'.
WA_COMMENT-KEY = 'USER :'.
WA_COMMENT-INFO = V_CONCATE.
APPEND WA_COMMENT TO IT_COMMENT.
WA_COMMENT-TYP = 'S'.
WA_COMMENT-KEY = 'DATE:'.
WA_COMMENT-INFO = SY-DATUM.
APPEND WA_COMMENT TO IT_COMMENT.
WA_COMMENT-TYP = 'S'.
WA_COMMENT-KEY = 'TIME:'.
WA_COMMENT-INFO = SY-TIMLO.
APPEND WA_COMMENT TO IT_COMMENT.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_COMMENT.
CLEAR IT_COMMENT.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_GRID_DISPLAY
Grid display
FORM ALV_GRID_DISPLAY .
IF RB1 = 'X'.
PERFORM GRID_DISPLAY.
ELSEIF RB2 = 'X'.
PERFORM LIST_DISPLAY.
ELSE.
PERFORM HIERSEQ_DISPLAY.
ENDIF.
ENDFORM. " ALV_GRID_DISPLAY
*& Form GENERATE_LAYOUT
LAYOUT
FORM GENERATE_LAYOUT .
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'. "OPTIMIZING FIELD WIDTH
WA_LAYOUT-ZEBRA = 'X'. "PUTTING ZEBRA COLORS
WA_LAYOUT-TOTALS_TEXT = 'Total'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUB TOTAL'.
WA_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
ENDFORM. " GENERATE_LAYOUT
*& Form GENERATE_SORT
SORT
FORM GENERATE_SORT .
WA_SORT-FIELDNAME = 'EBELN'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " GENERATE_SORT
*& Form GRID_DISPLAY
GRID DISPLAY
FORM GRID_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'IT_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'Purchase Order Details'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENT
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form LIST_DISPLAY
LIST DISPLAY
FORM LIST_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = I_BYPASSING_BUFFER
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
<b> I_CALLBACK_USER_COMMAND = 'IT_USER_COMMAND'</b>
I_STRUCTURE_NAME = I_STRUCTURE_NAME
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENT
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER = IR_SALV_LIST_ADAPTER
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " LIST_DISPLAY
*& Form HIERSEQ_DISPLAY
HIERSEQ DISPLAY
FORM HIERSEQ_DISPLAY .
IT_KEYINFO-HEADER01 = 'EBELN'.
IT_KEYINFO-ITEM01 = 'EBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENT
IT_EVENT_EXIT = IT_EVENT_EXIT
I_TABNAME_HEADER = 'IT_EKKO'
I_TABNAME_ITEM = 'IT_EKPO'
I_STRUCTURE_NAME_HEADER = I_STRUCTURE_NAME_HEADER
I_STRUCTURE_NAME_ITEM = I_STRUCTURE_NAME_ITEM
IS_KEYINFO = IT_KEYINFO
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_BYPASSING_BUFFER = I_BYPASSING_BUFFER
I_BUFFER_ACTIVE = I_BUFFER_ACTIVE
IR_SALV_HIERSEQ_ADAPTER = IR_SALV_HIERSEQ_ADAPTER
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB_HEADER = IT_EKKO
T_OUTTAB_ITEM = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " HIERSEQ_DISPLAY
<b>
*& Form IT_USER_COMMAND
text
FORM IT_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
FREE IT_FIELDCAT.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_FINAL INDEX RS_SELFIELD-TABINDEX.
PERFORM GET_EKBE.
PERFORM GET_FIELD_CATALOG.
PERFORM GET_LIST.
ENDCASE.
ENDFORM. "IT_USER_COMMAND</b>
*& Form GET_EKBE
text
FORM GET_EKBE .
IF NOT IT_FINAL[] IS INITIAL.
SELECT EBELN
EBELP
BELNR
MENGE
MATNR
INTO TABLE IT_EKBE
FROM EKBE
FOR ALL ENTRIES IN IT_FINAL
WHERE EBELN = IT_FINAL-EBELN
AND EBELP = IT_FINAL-EBELP.
ENDIF.
ENDFORM. " GET_EKBE
*& Form GET_FIELD_CATALOG
text
FORM GET_FIELD_CATALOG .
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'PO Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'Item Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'BELNR'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'Material Document'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-COL_POS = '4'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'Quantity'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-COL_POS = '5'.
WA_FIELDCAT-JUST = 'R'.
WA_FIELDCAT-SELTEXT_L = 'Material Number'.
WA_FIELDCAT-LOWERCASE = 'X'.
WA_FIELDCAT-DO_SUM = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
ENDFORM. " GET_FIELD_CATALOG
*& Form get_list
text
FORM GET_LIST .
IF RB1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'SECONDARY LIST'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = IT_EKBE
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
IF RB2 = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = I_BYPASSING_BUFFER
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
IS_LAYOUT = IS_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER = IR_SALV_LIST_ADAPTER
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
T_OUTTAB = IT_EKBE
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " get_list
Thanks
Vikranth Khimavath
Message was edited by:
Khimavath Vikranth -
Double click and get and store the value in variable.
Hi,
My intention is when i double click a particular record on a tabular, i want to capture or store the particular value of record into a variable and call that variable in print/preview button PLSQL code.
Below i show the screenshot which contain a tabular and print preview button. After populating the data. the user will double click on the agent code LC354 and click the print/preview button it should display report for only the
agent code of LC354(this is what i want). But normally when i click the print preview button it wil show the report of agent code of LC354 and LC325(this what i dont want).
http://imageshack.us/photo/my-images/811/printpb.png/
My problem is how to capture the value((*LC354*)) of particular record after double click the agent code(*LC354*)?
i tried to store agent code in variable AG_CNT in mouse double click trigger with following plsql code. but it dosent work.
declare
AG_CNT varchar2(10);
begin
*AG_CNT* :=GET_ITEM_PROPERTY('RFQ_AGENT_DETAILS.AGENT_CODE',CURRENT_RECORD);
end;after that pass that AG_CNT value in *:AG_CODE*. below code is in print/preview button.
cursor c1 is select nvl(count(ENQUIRY_NO),0) from scott.EXP_QUOTE_STATUS
where ltrim(rtrim(upper(job_status))) like 'APPROVED%' and ENQUIRY_NO = :REQ_FOR_QUOT.ENQUIRY_NO
AND AGENT_CODE=*:AG_CODE* ;how to do this?
skud.Hi skud
i juast want to store the agent code to variable.if i did get ur point...
Why don't u just use a simple assign statment for example...
DECLARE
V_VALUE NUMBER;
BEGIN
V_VALUE := LC354 ; -- IF it was a value as LC354 static i mean
-- or u could use any value
V_VALUE := :ur_form_item_name; --- if it was dynamic
END;That's it .
Hope this helps...
Regards,
Ammatu Allah. -
How to print/post double-quotes on reportserver
Hi, I am using rwservlet and cannot send double quotes. I can escape single quotes with another single quote, but double doublequotes do not work. I have tried url-encoding and html encoding, and even their combination, but report server just refuses to generate the PDF with a string with a double quote.
this is my URL:
http://rs-server:7778/reports/rwservlet?cmdkey&report=somereport.jsp&desformat=pdf&TESTSTRING=aaaaaaaa&destype=cache&ACTUSER=19
now I would need in TESTSTRING to have double quotes
PS: tried BI Oracle Business Intelligence 10g (10.1.2) and forms and reports 10gPostScript printer - send it to the printer port e.g. LPT1: with a simple copy.
Non-PostScript printer - you'll need to buy a PostScript RIP, or perhaps use Acrobat Distiller to convert the PostScript to PDF, then print the PDF with Acrobat's API - see the Acrobat SDK. (This is not possible with the free Reader). -
When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?
Anyone can help to advice how to solve this issue ?
-
Double clicking on a region to open it no longer works...
After installing OS 10.8.2 I have problems with Logic 9.1.8. If I double click on a region in the Arrange window, it used to open on the lower part of the Arrange window so I could edit notes, velocity settings etc. Now, when double-clicking, the lower part opens for very short time (0,1 second) and then disappears. I have deleted prefs files, restarted the iMac etc., but nothing helps. - What should i do? Is there any other way to open a region in the lower part of the Arrange window?
I just discovered that I have the same problem when double clicking on instruments. They open for a very short while (0,2 sec) and then close. This means that I can't adjust parameters in the pop-up window (instrument, filter etc.). Very strange. I remember I had this problem some weeks ago, but it disappeared. Not now.A few ideas..
Have you checked your mouse/trackpad settings in System Preferences.... in case something got messed up there... as it sounds like an input device issue in some ways
Also, check Logic Preferences/General/Editing and make sure that Double Clicking a Midi region Opens... is set to Piano Roll (Even if it is.. try unchecking it.. close prefs.. and recheck it again..)
Finally, you said you had trashed the pref files.. which one(s) did you trash? Did you also trash the CS one too.. as it could be related to a control surface issue.. I mention this because a client of mine had an issue after installing an iPad Controller for Logic... If you have an iPad/iPhone.. make sure the iPad/iPhone is powered off (Not just asleep) and test after that too... -
InDesign crashes every time you double click to open an .indd file on Windows system
InDesign crashes every single time you double click to open an InDesign file and has done so since replacement of the original version of InDesign introduced in the Creative Cloud launch. Does anyone else have this problem? I'd say it was unique to my system if I hadn't experienced the issue repeatedly on several different systems now. You have to relaunch InDesign which then opens the file from recovery, so it saw the file you tried to launch in the first place. This leads me to believe the problem lies with the file association registry of InDesign inside Windows systems. I find it unbelievable that this problem still exists and remains unreported and that a solution hasn't been implemented by Adobe to rectify the issue.
The double click is a fundamental tenant of opening files on a Windows system in the same way a single click is on a Mac. Does InDesign crash ever time a Mac user clicks to open their files, I think not.
Anyone got any ideas other than the obvious which is Adobe actually got their figure out and fixed it.
Cheers,
Pat DoyleHi Michael,
I'll give it a go. Don't really like messing with the registry on Windows boxes. Yes you can do it, but it can end up being a case of the operation was a success, but the patient died.
Just was rather hoping someone else had already experienced this problem and posted the registry tweak. Didn't want spend hours reinventing the wheel. Not because I'm lazy, but I have so many demands on my time that resolving a minor issue that effects me only seems like it should be pretty low priority.
The system I'm using is brand new, but the problem seems to have followed me regardless which may indicate that it is seated in my synchronization information somehow. Really don't know how that could happen as I'm not an Adobe engineer or have the remotest idea where to even start looking. So I think I'll mark your suggestion as the "Answer" and just learn to live with it.
Windows eh! Can't live with - can't live without it. I'm sure Mac can be just as temperamental. Just have to chalk this one up as being just another ghost in the machine.
Thanks for all the advice you have kindly offered, much appreciated.
Cheers,
Pat Doyle
Maybe you are looking for
-
What is difference in fields between invoice and purchase order ?
-
Multiple text boxes on slide not advancing properly
First let me say that this is my very first post - ever - anywhere. I don't even know if I'm 'posting' correctly, so please forgive me if I'm doing this wrong. I am brand new to Captivate (1 week), but am already under a work deadline to produce a
-
XSLT construct "for each" not working in transformation
Hi everyone I am using for each inside a transformation it was working fine until added parameters.After included parameters "for each" is not happening the db is invoked only once even if there are muliple nodes. can anyone help me on this issue. Ho
-
Hello all, Is there a way to get linear TC or SMPTE into logic, as in thru an audio track, so that it will use that in it's BWAV timestamp, without using a MTC syncronizer? The Motu 828MKII has a TC in, and DP will sync to LTC or SMPTE, but can't fin
-
Two charges were made for in-app purchase
Hi, this has happened two time in the course of 1 month. I've made two in-app purchases from two different apps throughout the month. And both times, i was charged twice the amount of the price of the item, here's the story.. LINE app 800 coins - a m