2 screen in one video

Just like this dude
http://www.youtube.com/watch?v=GKNoBk1_p-8
How do you do that in iMovie HD?
Message was edited by: beat4dasoul

You can't do it in iMovie without recourse to other programs/plug-ins.
Check out the geethree plug-ins. www.geethree.com

Similar Messages

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

When upgrading Flash 10.2 (Firefox at Version 3.6.14) Any Browser embedded videos run in a split screen (the same video in one screen only dual). Doesn't happen in IE. To fix I did a system rollback.

When upgrading to Flash 10.2 (Firefox is at Ver. 3.6.14, Windows XP), any embedded videos run like a split screen (The same video in one screen, dividing the screen into two running at the same time). This doesn't happen in IE.

When upgrading to Flash 10.2 (Firefox is at Ver. 3.6.14, Windows XP), any embedded videos run like a split screen (The same video in one screen, dividing the screen into two running at the same time). This doesn't happen in IE.

Screen Sharing and video chats don't work

I've been searching this forum for awhile and I haven't found a concrete answer to my problem, so if this question has been answered please excuse me. Ok, So here's my situation am running iChat on Mac OS 10.5.1. Whenever I am using my laptop at my school on the network their, I am able to use both screen sharing and video chat. But when I am at home, I am unable to use either one. It begins to try to start the session, but then i receive a message that tells me that a connection could not be established. I know that I have internet access, but I don't know what could be wrong with it.

After investing far to long in looking at this exact issue on my end, reading the seemingly endless threads on the exact same error, trying all the various tweeks and QT settings, bandwidth limit settings, etc etc. proposed here, I have now solved this problem, and the none of the above were part of the solution.
I have perhaps one of the the most common routers on the market, Linksys WRT54GL.
In a totally unrelated network problem (a printing issue), Linksys tech support advised me to reset my router. There is a small button on the bottom. I depressed it for 30 seconds. Rebooted everything and my printer miraculously worked. Yea, I had to reenter my WAP passkey, router admin password etc., but that took 2 secs. So, what does this have to do with iChat?.... The very next time I tried iChat video and turned on and enabled my camera, the recipient immedialty saw me. No connection error.
Problem solved, for me art least. Not sure if anyone has tried this, but makes sooooo much more sense than the other unApple like suggestions I previous tried. Hope this helps.

Can you lock touch screen when watching videos!??

Can you lock the screen so it doesn't become a touch screen when watching videos!??
Just got new ipod (7th gen) and this driving me crazy that I think I'm going to continue to use my older one unless there is a solution out there. I watch tv shows while commuting and while walking here or there I have to 'palm' the ipod or walk with it at my side, and the problem is that since the touch screen is sooooo sensitive I keep fwding/rewinding/swiping the screen to something else, and then to get back to that part in the video is a pain because unlike the older ipod you can just fwd a few secs, this one jumps minutes because it's so sensitive. PLEASE tell me there's a way to lock it from accidently touching it!

No - there is no such switch on the iPad - the switches control volume, muting, screen rotation, and the home button itself.
You could place it behind a screen of some sort so touching the outer screen won't affect the iPad screen - I've seen ads for 'presentation kiosk' type devices for the iPad that allow this, although I'm not sure how practical they would be in the backseat of a car.

7.4 changed my full screen view of videos

I updated to iTunes 7.4 this morning after realizing most of the new features are useless to me who has no iPod or iPhone, but I did see mention of full screen support (and couldn't remember if that was new or not.)
I played a couple of videos going from command-0 to command-3 and then command-F and back again, getting inconsistent results (ending up with command-F giving me a small video view in an entirely black background.
Not only that, the thumbnail for one of my videos, changed from its former image to a solid green screen, (although the video still plays when clicked on.)
I went back to my daughter's PC with iTunes 7.3.2.6 and noted that I have complete control of the same videos from the command-0 setting all the way to command-F (full screen view) and back and forth without weirdness.
Anyone else note similar quirks with 7.4 full screen support?

Well, I have solved part of my problem - in Preferences>Playback, I changed "Play movies and TV shows" and "Play music videos" to "in a separate window" and the sizing issue seems to have settled down. Command-F seems to have a toggle action.
Choosing Command-0, command-1, command-2, command-3 steps up from smallest size to "fit to screen" size and then command-F takes you to full screen mode. but hitting command-F again then takes you back to "double size (command-2) although the menu shows View>Fit to screen command-3 as selected. Weird.
Choosing one of the other selections, say double size (command-2) repeatedly just sets that size on the first attempt and then on later repeats of command-2 it just flashed the "View" menu item without toggling to another size (and continues to display View>Double size command-2 as it should.
So the remaining question I guess is how to get my thumbnail view back from the green screen. How is that image selected anyway? It doesn't appear to be the first frame of the video necessarily.
And here I am back later editing this after reading the iTunes Help stuff. I fixed this by control-clicking on the frame I liked and then selecting "Set Poster Frame" from the dropdown.
So overall, not much to complain about other than the weirdness with video sizing and command-F
Message was edited by: WebSailor

I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top. The fading on and off light isn't working anymore either. Does anyone know anything about this?

I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right. The fading on and off light on area surrounding the screen isn't working anymore either. Has anyone else had similar problems? Any solutions? Thanks!

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Recording the screen with a video camera

Can someone help me be able to record everything on my screen to my video camera? Can I use a firewire to do so? Is there a specific application i require? What I DON'T want to do is record my screen straight to the computer (this will be processor/space intensive) plus I already know how to do that? Thanks in advance.

Welcome to the Forums!
I'm a little confused. You want to record your screen to your video camera? Point the camera at the screen and press record on the camcorder. Viola.
I suspect what you want to do is not that simple, but that's the answer to the question you asked
IF you have a recording device with a _video in_ (which is something that camcorders typically don't have!! - other than the lens, I mean...), you'd need to convert the video out - which is the DVI port.
So, if it were me, I'd use my DVI-to-video adapter, connect the DVI output to my DVR (the one on my TV), set the DVR to that input, and record that way.
Hope this helps...

Switching from screen share to video chat

I'm using iChat ver. 4.0.2 on an iMac. I collaborate with colleagues and we frequently use the screen sharing mode, but I cannot figure out how to change back to video chat direct from the screen sharing mode. If I click on the little video camera at the bottom of the iChat box, nothing happens. If I end the screen sharing, the entire iChat session shuts down. Any advice on switching from screen sharing to video chat mode without hanging up?
Thanks!

You have to End Screen Sharing and start a New Video chat.
There is no elegant way to do it.
In iChat go to the iChat menu and Feedback option send in a Wish List item. (there is a Free text Box and one of the Drop downs is for Enhancements Requests.)
11:19 PM Monday; May 26, 2008

IDVD - One video in the project goes green, but still plays audio

As far as I can tell, no one has posed my particular problem, but I have complete confidence that I'll get some solid help. I've had 5 or 6 big problems with iDVD and found all the answers in these discussions. So thanks!
My boyfriend is a theater director and I have been putting together his DVD reel using iDVD 7.0.4. I am using the "center stage" theme with no motion or music in the menus. The DVD has slide shows of production shots and video clips.
-> I put the video into the computer by first using a VHS to DVD recorder and then using the program "HandBrake" to rip the DVD into .m4v, then edited them with QuickTime Pro "trim to selection" and saved the clips as .mov self contained movies.(I should add right here that I cannot use iMovie. My computer isn't big enough to run it properly with any kind of speed, and I don't know how to use it and don't currently have the time to learn it)
-> The VHS to DVD recorder inserted chapters every 5 minutes, and all of the clips included 2 or 3 chapter markers. I think the longest video is 8 minutes or so.
-> When I "add a movie" in iDVD and it asks me if I want to add chapter markers for the movies, I tell it no.
->When I preview the DVD in iDVD every video plays with out error.
-> I saved the project as a disk image and the videos were encoded under the "pro quality" setting
-> When I preview with the apple DVD player, every video and slide show plays through without incident except one. One video plays 3 seconds, then the audio skips a beat and the video goes all green. I have no idea why because the 3 other videos from this show came from the same DVD and were processed exactly the same.
Please Please Help! Thank You!
This is the first DVD that I've ever made, and I could have never done it at all without these discussion pages. I hope some programmer at Apple is reading all these problems and fixing them for the next iDVD...or at least writing down solutions to include in the help menu.

Hi
I stumbled on the same problem as you. For me everything got messed up after trying to preview my project in fullscreen. Just got a blank black screen and now I can't ad titles or preview the clips! The most annoying thing is that I'm almost finished with the video I spent 4 hours on!
Anyone here now what the cause of this problem can be? Seems like many here have stumbled on it a few times
Edit: Just noticed my whole project seems to be done for! I can't even change the themes and when trying to change the settings of the clips it says "no clips selected" even when I can see they are in my project!? This is really frustrating.
Message was edited by: Wahlgreeen

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

Hi
There are several layers to this Q
A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
B. DVD can be better or worse
• Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
• Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
• Using Right encoder quality depending on movie and Manu duration is very important
• Use of high quality brand of DVD - is important - I use Verbatim DVD-R
• Type of DVD - DVD-R plays on more DVD-Players (even old ones)
• Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
• I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
• What You feed iDVD does matter
Video codecs
Audio file formats
Photo file formats
Yours Bengt W

Running 4 screens as one with Mac Pro Late 2013

Hello there, got a Mac Pro late 2013 edition driving 4 60" 1080P screens in a 2x2 configuration. Trying to make those work as one 4k display. Was able to get it working to allow us to display a page across all 4 displays. But have not been able to get a video to display across all 4. Our current configuration has also been very finnicky and anytime we move the webpage around, it snaps the window to be full screen across the bottem two displays.
Anyone have any idea's as to how to make this work the way we are wanting to?

"Fullscreen" is a garbage feature ported from IOS and the iPhone, the land of tiny screens and one-at-a-time processing -- AVOID it at all costs.
This will work as long as you stretch a Window across multiple screens, and turn OFF all hints that you want multiple, independent screens.
This describes the new ways Mavericks tries to undercut the way it used to work:
OS X: Using Multiple Displays in Mavericks

You Tube videos don't play. The site comes up, but a blank white screen where the video should be.

When I try to play videos from You Tube, I get a blank white screen where the video should be. When I go to full screen the whole screen is white. Originally the white screen happened on the expanded view only.
IE doesn't have the problem, but Google chrome and Firefox 4.0 do.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Try to disable the hardware acceleration in the Flash Player.
See:
* https://support.mozilla.com/kb/Cannot+view+full+screen+Flash+videos
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

I always get a black screen & error message with YouTube, white screen on Facebook videos.

I always get a black screen & error message with YouTube. White screen on Facebook videos. I am using Firefox 17.0.1.
There is no more content to provide.

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems caused by Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Gray loading screen on youtube videos

When i try to play YouTube videos, there is just a gray screen in the video box and the loading icon just continually spins. When I pause it, the loading icon goes away. There is no error message. YouTube videos work on Chrome. It is not a black screen, it is clearly gray. YouTube updated or something, and I think it might have something to do with this

'''[https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings Refresh Firefox]''' {web link} is a '''LAST RESORT ! !'''
Refresh Firefox - reset add-ons and settings
If you're having problems with Firefox, refreshing it can help. The refresh feature fixes many issues by restoring Firefox to its default state while saving your essential information like bookmarks, passwords, and open tabs. Your ------------------------------
System Details shows;
Installed Plug-ins
Shockwave Flash 17.0 r0
Adobe Shockwave for Director Netscape plug-in, version 11.6.4.634
Adobe Shockwave for Director Netscape plug-in, version 12.1.3.153
Adobe Shockwave for Director Netscape plug-in, version 11.6.8.638
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''Version 17.0.0.169 https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''Version 12.1.7.157 http://get.adobe.com/shockwave/'''

2 screen in one video

Similar Messages

Maybe you are looking for