2 selection Criteria on Profit & Loss Report (Project & Dimension)

Good day Experts,
Is it possible for Profit & Loss Report to have 2 Selection Criteria? our client wants to have Profit & Loss Report per Product  (Project) & Branch (Dimension).
We tried to create an A/R & A/P Transactions with Project & Dimension defined for each line item, when we viewed the P&L Report, and select Project only as the Selection Criteria the P&L is correct, but when we included the Dimension on the Selection Criteria it only shows the Income / Turn-over Account Value & not viewing the COS / COGS Account Value.
Hope to hear from you soon. =)

First you should check in JE where project and profit center updated or not .because if account type is not Expenditure then cost center nerver effect JE entries .
And Project updated have not any issue but in Cost center it should be Expenditure Account in Chart of Account.
Thanks
Manvendra Singh Niranjan

Similar Messages

  • Where can I get Profit & Loss Report by Department?

    Dear Experts,
    Where can I get the Profit & Loss Report by Department in CO, preferably with dept with dept comparison?
    regards,
    Abraham

    Hi
    1. You can use the SAP Easy Access Menu for Accounting > Contr > Prof Ctr Acc > Information system and find out the reports
    2. For 2nd option:
    a. COPY the report to ZSIP-001
    b. Remove the field KOSTL (Cost Ctr) from Edit > General data selection
    c. Include the KOSTL in your columns...Create 2 variables for 2 columns and enter the cost centers before executing the report
    br, Ajay M

  • Profit & Loss Report for Every month

    Hi,
    Can anyone tell me is it possible to get the report on Profit & Loss Report to every month for each PROJECT? If possible please let me know the T.Code.
    Regards,
    Mohan.

    Hi
    try this tcodes
    S_ALR_87013572 - Project results
    CJIF - Results Analysis
    Also F.08 is not balance sheet report because we don't assign Financial statement version there
    Regards
    Tanmoy

  • Hide Particular Item Group from Selection Criteria of Sales Analysis Report

    Hello Experts,
    Is this possible to Hide Particular Item Group from Selection Criteria of Sales Analysis Report?
    I have one Item Group as 'Special Items'.
    Now, when I open  Item wise sales analysis report, I want to hide above mentioned group from selection criteria.
    Thanks in advance.
    Best Regards,
    Pankit Sheth

    Hi,
    1. Not possible to put validation for selection criteria windows.
    2. In standard, I don't think it is possible to hide only one item group.
    3. Alternatively don't give authorization to user for running sales reports. If still need create customized query and ask user run every month.
    Thanks & Regards,
    Nagarajan

  • How to use a subreport field as selection criteria for the main report

    Dear All,
       I created a report with one subreport and im comparing information from both reports but i need to apply selection criteria in the main report using one of the fields in the subreport, the problem is that the subreport field doesnt appear in the select expert screen. By any chance, someone knows how make a subreport field be used by the select expert.
    Thanks,
    Martha Medrano

    Dear Dom,
       I created the subreport table called IIM (748 items) in sql in the main report as you suggested with the below code:
    SELECT "IIM"."IPROD", "IIM"."IDESC", "IIM"."IID"
    FROM   "S102F360"."BPCS405CDF"."IIM" "IIM"
    WHERE   NOT ("IIM"."IDESC" LIKE 'GEN%' OR "IIM"."IDESC" LIKE 'OBS%') AND "IIM"."IID"<>'IZ' AND "IIM"."IPROD" LIKE '3%'
    and i have another table called ITEM_MASTER (3221 items):
    SELECT "ITEM_MASTER"."ITEM_ID", "ITEM_MASTER"."DESCRIPTION"
    FROM   "WHSPRO"."dbo"."ITEM_MASTER" "ITEM_MASTER"
    ORDER BY "ITEM_MASTER"."ITEM_ID"
    and im trying to display all items in the ITEM_MASTER table that are not in the IIM file but i haven't been able to accomplish this, i am using as primary the ITEM_MASTER table with 'Inner Join' as Join Type,  and '!=" as Link Type. Do you have any ideas on how can i display the requested items.
    Thanks for your help

  • Regarding KE30 - Gross Margin report & Profit & loss report

    Hi,
    Can anybody give me some overview on Gross margin and profit & loss report . I would Like to know the functionality of these two reports . Please provide me some usefull links.
    Regards,
    Ratheesh BS

    thanx

  • Project Code range on Profit & Loss Report

    Forum,
    Is there a system variable which can be added to the Profit & Loss Statement which will show selected project codes on the PLD.
    Regards,
    Juan

    Hi Juan,
    Simply click on Expanded Selection criteria and you will see the fields you want. Use them in your PLD.
    OFLT WhsFrom1
    OFLT WhsTo1
    OFLT WhsFrom2
    OFLT WhsTo2

  • Profit & loss reports for a project in PS

    Hi,
    does anybody know how to calculate profit & loss for a project and which reports show this?
    Thanks
    Long

    Hi,
    I run OPUR and saw some entries there, but while while selecting the the database profile for that particular report I don't know how to "go to change DB Profile"
    can you show me step by step to to this
    Thank you
    Long nguyen

  • Skiping initial selection criteria screen of HR report for Manager Desktop

    Dear All,
    The reports are configured using a custom scenario (Z Scenario) for Manager Desktop and used over the Portal through MSS. I have a requirement where for only one report (named Expired Qualifications) the initial selection criteria screen which comes when accessed through portal needs to be disabled or skipped and directly the transaction S_AHR_61015536 for this report needs to be called.
    Please provide the inputs if it can be done and how for one report only.
    Regards,
    Samir

    Dear Sen,
    I have checked the thread suggested by you but the report here is not independent transaction integrated using iView. It is a part of Scenario which makes the reports available to the managers. It uses MSS Standard iView "Reports" and "Selection Criteria". Both iViews are in one page as delivered by SAP. The reports iView displays all the reports configured in the scenario for Manager Desktop and Selection Criteria iView is launched first in the portal content area when the report ( "Expired Qualifications") link is clicked from the Reports iView.
    Regards,
    Samir

  • Copying selection criteria in XLR advance report builder

    Can anyone tell me if it is possible to copy columns, rows or cells in the XL Reporter advance designer and copy the selection criteria as well?
    Thanks

    Have you tried to save the file as .rcr so that you could reuse the columns, rows or selection criteria?
    Thanks,
    Gordon

  • Balance sheet and Profit & Loss reports

    Hi all
    I need some help with the Balance sheet and Profit and Loss statement, I created new fields on both repors to hide the "ZAR" and round the amount fields to 2 decimal places.
    But when ever I print preview the report I get this error :-
    23/03/2010  10:47:19: Printing Error:This operation is not supported for this data type (RPT -6716) (Field: F_104) Method: Amount DataType: Variant  [Message 200-38]
    Thanks
    Bongani Dlamini

    Hi All
    The report is not underlining the sub totals and totals like it was before on the original system report.
    Is there a way of making it underline?
    Rgds
    Bongani Dlamini

  • Where do you create a Selection Criteria TOKEN? (Crystal Reports, SAP B1)

    I have downloaded "How to Work with Crystal Reports in SAP Business One" and read where it mentions "tokens" (starting on page 19).  I followed the directions and created a New Parameter in a Crystal Report with the name of
    BPCode@Select distinct CardCode from OCRD where CardType = "C"
    as directed on page 21 as an example of a token.  OK, so now I have a parameter with a very long name that doesn't do anything when I run the report in standalone Crystal Reports connected to our SAP B1 application.
    At what place in the "Create New Parameter" dialog box in Crystal Reports do you actually enter this information?  Nothing in that dialog box seems appropriate for SQL expressions.  Reading through SCN threads, I could not find anything that addressed this simple question.  What am I missing?
    NOTE: I do NOT have the CR Add-In available to me in SAP B1.  I cannot get it to install.  All of my work is done in standalone Crystal Reports and all reports are then imported from there.  I am a CR developer with less than 1 month experience with SAP B1.
    Thanks.

    OK, so I imported an .rpt file as a "report" instead of as a layout and placed it in a known module location (though the options were extremely limited).  I had no idea where to go to run the report, but under "Modules", "Reports", and the location I just imported to, I found and chose the report.
    The next step was a dialog box with two blank prompts and a third blank prompt asking for a particular field value from a table in the report.  The actual Crystal report has only two parameters (good ol' DocKey@ and ObjectID@).  I have to actually look at a known document in B1 and enter the values for the parameters before I get an actual result.
    Now, more questions...
    If there is a token in this report process, where is it?
    Why would I run a report this way when it's going to ask me the DocEntry and ObjectId numbers which are not known to me unless I do research (Actually, what you don't know is that all of the reports I've created are revisions to marketing documents, so I haven't created anything new or unique to B1 that would involve complex analysis).
    I spend almost two hours a day scouring the SCN to figure this stuff out and am still lost.  I haven't read anything anywhere that describes this process in an adequate fashion.  If SAP makes BOTH B1 and Crystal Reports, why not make the connection between them seamless and user-friendly?
    Gordon, if you're listening, you'd probably do well writing another book on this subject!!

  • Adding Selection Criteria in Any Payroll Report(PTax)

    Dear Experts,
       Can you please tell me the Payroll Report especially with the Professional Tax having the Column field of "Business Area". My Client want the report with Business Area Wise where it will helpful to identify the Region or Branch Office,when the G/L Account in FI at the time of mismathching.
      The Personnel area's are not equal to the Business area for my client.
    I have tried in the Table T599B, but it is not working . Please tell me if there is any specific to work on this table.
    Please throw some light..
    Thanks
    Praveen

    Dear All,
       As I added the Business Area field in  in Selection Field with use of "Further selection" button of the transaction PC00_M40_PTX,and generated the report..
    In the Generated report I have selected the "Change Layout " button and it doesnt shows the Business area Field.
    Please explain if any config is required..
    Thanks

  • Profit Loss Report

    Hi,
    I have some questions on general ledger table FAGLFLEXT to be used in a P&L report based on cost center.
    The P&L report will have various line #s and each line # represents something like Gross Sales, Rebates,
    Discounts, etc. There are also totals of these line#s to get totals.
    1. What does each record in FAGLFLEXT represent?
    2. Does the field HSL12 represent these amounts for the 12th month?
    3. How to I get the totals for year till date?
    I'm not an FI guy, so please can anyone explain this in an understandable way.
    Thanks,
    MJ

    Hi
    FAGLFLEXT is a summary table. Each record is summarized example like a period suppose the valu for a period is the summary for the period.
    HSL 12 - Check the feild HSL is in FAGLFLEXT table if yes it the period. If you want for entire year you have to give from HSL-1 to HSL-12
    Total for year- If you are geting a summary fgure click menu - row & click on explode row it would give summary total.
    Thanks
    Colin Thomas

  • Pre-Filled Selection Criteria in Transaction CKMLCP Report CKML_RUN_STATUS

    Dear ABAP Specialists,
    i am actually searching for the origin of the data provided as costing run number while running the report via transaction in foreground. If i try to start the same report via background on SE38, i always get the information costing run number is missing.
    So can someone help me to identify which is the costing run number i am searching for or better where this is normally drawn from, so that i could possibly start this steps via job automatically in the future or at least have the information where i could get it from?
    Thanks a lot in advance
    Best regards
    Carsten Klatt

    Dear ABAP Specialists,
    i am actually searching for the origin of the data provided as costing run number while running the report via transaction in foreground. If i try to start the same report via background on SE38, i always get the information costing run number is missing.
    So can someone help me to identify which is the costing run number i am searching for or better where this is normally drawn from, so that i could possibly start this steps via job automatically in the future or at least have the information where i could get it from?
    Thanks a lot in advance
    Best regards
    Carsten Klatt

Maybe you are looking for