2 Servers install on one MaxDB

I've installed MaxDB 7.6 with OS Windows 2008 r2 and created a instance SDB on <local>database.
It works pretty good.
Under this configuration I'd like to add another Server(name ContentServer) on existing Server as above.
It means there might be 2 different Servers ( one <local> and ContentServer) on one maschine.
Is it a possible to configure like this?
The history about that is following:
It was installed 2 Content server System with same instance name "SDB" a couple of years ago.
I want to merge this 2 old systems into one new MaxDB with OS 2008 r2. The first SDB was installed with restore without any problem. But it comes to question, how add to 2. system on existing server with same instance name- we don't want to install as 2. Instance with a different name.
Who can give me hints about that or recommand something a resanalbe solution?
Thanks a lot in advance,
Gauguin

Hi,
I am not sure I have understood your question correctly, so let me summarize:
You have Content Server A with CS database A (SDB) and Content Server B with CS database B (SDB).
Now you want to merge both database instances A and B into one SDB instance.
And then access this new combined database from both Content Servers?
Technically, you could use the MaxDB 'loader'-tool to export data from one database into the other, but I think this must be handled/discussed on application level first. What if both databases share documents with the same id, but different data?
I would recommend to open a OSS message on the BC-SRV-KPR-CS queue first to have the Contenet Server application colleagues to assess this scenario first.
Feel free to correct me though, if I misunderstood you here...
Kind regards,
Thorsten

Similar Messages

Multiple agentry servers installed in the same system?

Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael Appleby

Hi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby

Two mobile servers installed on same machine

I am using Oracle Lite 10g(10.2.0)
Is it possible to have 2 mobile servers installed on the same windows server as standalone mobile servers?
One is for development and points to development Oracle instance repository
Other is for acceptance test and points to another Oracle instance repository.
If any one has tried this please let me know.
Thanks for your response.

Run them under different ports. One on 80 and the other on 8080.

I just updated the software on my iPad and now I cannot update my Aps or install new ones. I ran a diagnostic and that resulted in "power issue." It wouldn't let me select what my options were. Any ideas?

Don't know where to get help. I just updated the software and I am having issues with not being able to update Aps or install new ones. The circles just spin and Aps just say "waiting." I tried running a diagnostic with the apple store and it came back with "power issues" (?) as a result. It wouldn't let me select an option to see what steps I could take to fix it, it just backed out of the page. I just don't know what to do.....

Hi,
Thank you for your reply, I did go to my general settings, but for some odd reason I don't have a restrictions setting, or a reset setting. I thought I could reset all the setting to see if it could be that, but as I said there aren't any.
My husband also has the iPad 2, and also did the software update and hasn't had any problems at all. I took both iPad's and compared the settings thinking maybe there could be a setting that could have been changed when the update was done.

Adobe After Effects CS4 Third Party Content only installed on one of two computers

Hello,
I installed Adobe Creative Suite CS4 MC on two systems. One system lists "Adobe After Effects CS4 Third Party Content" in Add/Remove Programs. This left me a bit baffled as to what this content is and why it only installed on one machine (i.e., assuming I did not erroneously selected or deselected it during the default install). I thought it would be reasonable to install the missing content on the second machine but I cannot find an installer listing "Adobe After Effects CS4 Third Party Content" in the CS4 default or custom installer.
Could someone please tell me what this content is used for and how I can install it on the second machine?
Thank you...

> It should by no means be shown separately in the install database
That's not true for one case.
If you install After Effects in trial mode, the third party content won't be installed. But it leaves the third party content installer on your machine so that when you add a serial number the plug-ins can be added. This causes a new installer to run, so it will be registered (and need to be uninstalled) separately from the main installer.
Frederick- Verify that both machines have the third party plug-ins that Mylenium listed. If it's not on the second machine you probably have it in trial mode and need to serialize. (If not, try uninstalling and reinstalling After Effects from the Master Collection package.)

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard.

If I have CS5 installed on one machine, do I need a new license to install on another machine?

If I have CS5 installed on one machine, do I need a new license to install or transfer to another machine?

No. Adobe apps can be installed and activated on 2 systems.
Mylenium

Moved iphoto to trash and downloaded and installed new one but still tells me to prepare and upgrade it when I have done it 2 or 3 times now... how do i get it to open so I can upload my photos?

moved iphoto to trash and downloaded and installed new one but still tells me to prepare and upgrade it when I have done it 2 or 3 times now... how do i get it to open so I can upload my photos?

It helps if you provide details - not just a problem
What exactly dod you have and have you done?
What version of iPhoto did you have and what version do you now have? Of the OS? If you are upgrading from iphoto '08 or earlier did you download and RUN the iphoto library upgrader?
What is happening including exact messages
LN

Installing Sun One Studio on Linux Mandrake 9.1

I try to install the Sun One Studio 5 on my mandrake 9.1 Linux.
I am using the jdk 1.4.2 and I am logged as root.
When running the command:
./s1s5se-linux-en.bin -isjavahome /home/products/j2sdk1.4.2
I get the error message:
The installation cannot continue for the following reason(s):
To install Sun ONE Studio 5 you need to log in as superuser or a user with administrator privileges.

Yep I agree this is very disapointing, however I have got Sun One Studio 5 Standard Edition working on Mandrake 9.1
Fortunatley I am lucky enough to have a spare hard drive and RedHat7.2, another pc networked up and the following is what I did....
Installed Redhat7.2, j2sdk1.4.2, then ran the SunOneStudio install as root, tested and works fine.
The Studio gets installed into /opt there are 2 dirs which are needed from what I can tell 1 is the ide "studio5_se" itself and the other called "imq"
cd into the root dir and create a tar file of the opt dir
tar -cf opt.tar opt
gzip opt.tar
I then copied the opt.tar.gz to a place I could download to the other machine, so I downloaded it, then shutdown RedHat,
re-installed my original Mandrake9.1 Hard Drive, and booted up.
logged in as root, and then transferred my opt.tar.gz to Mandrake,
untared it into the opt dir and then moved the imq and studio5_se dirs into /opt
installed j2sdk1.4.2 rpm on Mandrake9.1
then command line I
1, cd /opt/studio5_se/bin
2, ./runide.sh -jdkhome /usr/java/j2sdk1.4.2
and HEY PRESTO
The only reason why I can see that the IDE will not install under mandrake is possible the coding under the Installsheild, maybe it looks for a file or someting that RedHat has and not mandrake, or just tests the OS to see if it is in the supported list, and if not then throws the error
If that is the case then it's proberly likely that it was setup like this because RedHat gives money to sun and not Mandrake????!!!?????
maybe I don't know3 just my observation, but 1 thing I do know is that due to this error I shall not be buying it, until sun change the way to install it or they go back to the old way the Forte installed
Just my thoughts,
and I hope this helps someone

Superuser without privileges installing Sun One Studio in Debian Linux

i am trying to install Sun One Studio in my Debian Linux and when i launch the setup application it tells me that i must log in as superuser to install. Well, the thing is that i launch the installer as root, but the program doesn't seem to think the same :)
Surprisingly, the log file doesn'l show any related error; it only shows a warning about some widgets... so this seems to be a simple bug in the installer.
Here's the log:
file type: 5
file id: 0
length: 1009
offset: 624320
file name: Verify.jar
file type: 0
file id: 1
length: 145
offset: 625329
file name: instructions.txt
file type: 2
file id: 2
length: 728
offset: 625474
file name: launch.txt
file type: 1
file id: 3
length: 347
offset: 626202
file name: path.jvm
file type: 1
file id: 4
length: 542
offset: 626549
file name: sunjdk14.jvm
file type: 1
file id: 5
length: 584
offset: 627091
file name: sunjre14.jvm
file type: 1
file id: 6
length: 485
offset: 627675
file name: sunjdk131.jvm
file type: 1
file id: 7
length: 461
offset: 628160
file name: sunjre131.jvm
file type: 1
file id: 8
length: 423
offset: 628621
file name: blackdownjdk131.jvm
file type: 1
file id: 9
length: 418
offset: 629044
file name: blackdownjre131.jvm
file type: 1
file id: 10
length: 548
offset: 629462
file name: sunjdk13.jvm
file type: 1
file id: 11
length: 432
offset: 630010
file name: blackdownjdk13.jvm
file type: 1
file id: 12
length: 433
offset: 630442
file name: blackdownjre13.jvm
file type: 1
file id: 13
length: 461
offset: 630875
file name: ibmjdk13.jvm
file type: 1
file id: 14
length: 468
offset: 631336
file name: ibmjre13.jvm
file type: 1
file id: 15
length: 449
offset: 631804
file name: sunjre13.jvm
file type: 6
file id: 16
length: 210451841
offset: 632253
file name: s1s5u1se-linux-en.jar
Finding a JVM
Initiating JVM search based on hints...
Searching for Sun Microsystems Java Development Kit (JDK) 1.4.X for Linux in PATH variable using platform hints
Searching for Sun Microsystems Java Development Kit (JDK) 1.4.X for Linux in PATH variable using path hints
Searching for Sun Microsystems Java Development Kit (JDK) 1.4.X for Linux in PATH variable using platform specific JVM Path hints
Checking JVM at /mnt/local/j2sdk1.4.2_04/ which was resolved from the platform JVM path /mnt/local/j2sdk1.4.2_04/bin
Verifying JVM at /mnt/local/j2sdk1.4.2_04/bin/java
for JVM: Sun Microsystems Java Development Kit (JDK) 1.4.X for Linux in PATH variable
Executing launch script command: "/mnt/local/j2sdk1.4.2_04/bin/java" -cp "/tmp/isjbAAjZc/Verify.jar" "Verify" java.vendor java.version in working directory /mnt/local/lalala/.
Output from the launch script execution
StdOut:
1739021872
Sun Microsystems Inc.
1.4.2_04
ErrOut:
Found matching JVM at /mnt/local/j2sdk1.4.2_04/
Matching JVM home is /mnt/local/j2sdk1.4.2_04/
Matching JVM file is /tmp/isjwSPfK2
Executing launch script command: "/mnt/local/j2sdk1.4.2_04//bin/java" -cp "/tmp/isjxGApzS/s1s5u1se-linux-en.jar" -Dtemp.dir="/tmp" -Dis.jvm.home="/mnt/local/j2sdk1.4.2_04/" -Dis.jvm.temp="0" -Dis.media.home="/tmp/isjxGApzS/s1s5u1se-linux-en.jar" -Dis.launcher.file="/mnt/local/lalala/./s1s5u1se-linux-en.bin" -Dis.jvm.file="/tmp/isjwSPfK2" -Dis.external.home="/mnt/local/lalala/." run in working directory /mnt/local/lalala/.
Output from the launch script execution
StdOut:
ErrOut:
Warning:
Name: scrollbar
Class: XmScrollBar
The scrollbar page increment is less than 1.
Warning:
Name: scrollbar
Class: XmScrollBar
The scrollbar page increment is less than 1.
Any idea? thanks for reading!

The error you report is not causing the problem.
Try : http://swforum.sun.com/jive/thread.jspa?forumID=128&threadID=29443
-Alexis

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

It is possible that you downloaded the Creative Cloud trial of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, this will not interfere with your catalog, preferences and personal files.
Download the appropriate version from the link below and install, your license key will be accepted and everything will be fine.
Product updates

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

When I try to delete my current installation of firefox or install new one it always leads me back to the same place, telling me i need to restart computer to install upgrade, but does nothing, how do i get new installation?

I have windows 7. When i recently installed windows updates I began having script errors for firefox and my weatherchannel programs. I went to control panel, programs and features and tried to delete these 2 programs to install new ones. It seems like the programs didnt compeletly uninstall because they are still listed in my programs but have no file size. I downloaded latest version of firefox but it wont install. It tells me i need to restart computer to install a previous upgrade. I do that and nothing happens. I keep going around in circles.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Process.conf file not found after installing Sun One Portal Server 6.0

This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
Any help will be appreciated...
Reporting Errors to the Robot Log File
When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
cslog_error(int n, int loglevel, char* errorMessage)
The first parameter is not currently used (may be used in the future) You can pass
this as any integer.
The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

2 Servers install on one MaxDB

Similar Messages

Maybe you are looking for