2 services ( ms filtering management and exchange transport) failed to start!
Hello ,
I'm trying to install Exchange server 2013 in Win Server 2012 , all is fine and done but the probleme is with the activation of two services that one (Exchange transport) depend the second (filtering management) . I tried to resolve the problem, looked for
a solution but nothing, so I need your help please, below are the errors:
1-Exchange transport: error 1068:the dependency service or group failed to start ==> that is normal because filtering management is down
2-filtering management: source: SCM event ID: 7023
Thank you all,
Hi Amir_Ali,
Please refer to the following article, and then review the Event logs to check if you can find some related
events that have been logged by the Service Control Manager (SCM) Eventlog Provider.
Event ID 7023 — Service Stop Operations
http://technet.microsoft.com/en-us/library/dd349413(v=WS.10).aspx
Meanwhile, please run
Server Health and Performance to check Exchange Server.
Hope this helps.
Best regards,
Justin Gu
Similar Messages
-
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I tried to install Itunes ver 11.1.4 on my Windows7 64 bit system and got this message: “Service ‘Apple Mobile Device’(Apple Mobile Device) failed to start. Verify that you have sufficient privilliages to start system services.”
I have administrator privillages so I dont understand what the problem is. I have loaded previous versions of Itunes before. Has anyone else had this problem?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trying to reinstall itunes 11.1.4 to my PC and I keep getting this message: Service Apple Mobile Device(Apple Mobile Device) failed to start. verify that you have sufficeint privleges to start system services. Then it says, ABORT< RETRY>IGNORE. I click ignore and keep gettign same message. Does anyone know how to get passed this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have tried to install a new update of itunes and keep getting the same message:Service "apple mobile device"(apple mobile device)failed to start verify that you have sufficient privilages to start system services) also it has abort retry and ignore as choices below i have tried completley uninstalling itunes but not icloud and keep getting this message anyone know what this is or how i can fix it
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
The iTunes upgrade didn't complete. Message comes up that says: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privideges to start system services." ...And neither Abort, Retry, or Ignore work.
Hi DaHare,
Thanks for using Apple Support Communities. If you are having trouble with Apple Mobile Device Service starting correctly, this article has steps you can take:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Cheers,
- Ari -
Trying to download I tunes and get this error message Service " Apple Mobile Device" ( Apples Mobile Device) failed to start. Verify that you have sufficent privileges to start system services
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I recently purchased an Iphone 3gs, and already have an itunes account...Itunes wont recognize my iphone...I have uninstalled and installed itunes 2 times and keep getting this error message.
Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
How do I correct?I had the same problem but managed to fix it with Amy ; the apple advisor. Here are the steps!
First of all, make sure you have the latest version of iTunes installed. You can download it from here. These instructions will NOT work for iTunes 8, 9 or 10 anymore. If you’re unsure, just uninstall iTunes then re-install with the latest files.
Next, you need to manually copy the Mobile Device Support directory from a working machine to your Windows 7 computer. Luckily, I have conveniently provided these files for you. You can download them here:
64-Bit iTunes 11.0.2: Please click here to download this directory for 64-bit Windows.
32-Bit iTunes 11.0.2: Please click here to download this directory for 32-bit Windows.
Once you download that file, you need to Unzip it to this directory. IMPORTANT: Make sure you unzip the CONTENTS of the zip file, don’t just copy over the zip file:
32-Bit: Unzip to C:\Program Files\Common Files\Apple
64-Bit: Unzip to C:\Program Files (x86)\Common Files\Apple
There are a large number of files in that directory, so it may take a little time, please be patient.
So, after unzipping, you should have a new folder “Mobile Device Support” in the Apple folder
64-BIT ONLY STEP: If you have 32-bit Windows, skip this step. It seems that Apple has put the “Drivers” in a separate location (don’t know why). You will need to download the drivers separately. Please click here to download the files for 64-bit Windows.
Once downloaded, you need to Unzip it to this directory. IMPORTANT: Make sure you unzip the CONTENTS of the zip file, don’t just copy over the zip file:
Unzip to: C:\Program FIles\Common Files\Apple
So, after unzipping, you should have a new folder “Mobile Device Support” in the Apple folder
Next, we have to merge the registry entries that will install the Apple Mobile Device service.
First, download the registry entries that I have provided for you here:
64-bit iTunes 11.0.2: Click here to download the registry entries for 64-bit Windows.
32-bit iTunes 11.0.2: Click here to download the registry entries for 32-bit Windows.
After you download the registry entries ZIP file, unzip it to your desktop and double-click each to install it. Say “Yes” to any prompts or confirmations about adding it to the registry. There are 2 entries, make sure you click BOTH and add BOTH to the registry.
Now, we need to install the correct driver for your iPhone / iTouch. Windows 7 incorrectly identifies the device as a digital camera. To fix this:
- Plug in your iPhone / iTouch (don’t have iTunes loaded at this time)
- Go to Device Manager (Click Start, right-click Computer, then click Properties. In the window that appears choose “Device Manager” on the left)
- Scroll down and find “Apple iPod” or “Apple iPhone” or “Apple iTouch”. It will likely be under the “Portable Devices” category.IMPORTANT NOTE: If your device is already listed under “Universal serial Bus Controllers” and not Portable Devices, you can skip these steps and go to Step 7.
- Right-click the Apple device and choose “Update Driver Software…”
- Choose “Browse my computer for driver software” in the window that appears
- It will ask you for a location; you want to Browse to this folder (location is the same in 32 and 64 bit Windows):
32-bit and 64-bit: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
- Click Next
- It should find the driver for your device; let it install that driver
Once you complete these steps, reboot your computer. Once you reboot everything should work exactly as expected! -
Error 1920. Service 'Apache Tomcat 5.5.20' (BOE120Tomcat) failed to start
Hi,
I want to install a BOE and be able to save Crystal Reports which report data off SAP system. The following is what I did:
1. Install JDK and Tomcat 5.5
2. Install BOE XI 3.1 SP2 and deploy it to the existing Tocat
The reason that I manually installed the JDK and Tomcat5.5 is because I got the "Error 1920. Service u2018Apache Tomcat 5.5.20u2019(BOE120Tomcat) failed to start. Verify that you have sufficient privileges to start system services." when I chose the option that let BOE install everything for me. I could not find the reason why the BOE120Tomcat could not start so I install it manually and deploy BOE on it.
3. Install SAP GUI 7.1
4. Install Java connector 2.1.8
5. Install BOE Integration kit for SAP Solutions XI 3.1
But after I complete step 5, the infoviewApp and CmcApp do not work. I use the tomcat web application manager, both of these two applications are stopped and can not start.
Does anyone know how can I start the infoviewApp and the cmcApp?
Thanks,
VickyHi Ingo,
I looked through the log file: SAPik_0.log and found some message saying that the installation package is against software restriction policy, it is not digitally signed and is permitted to run at the 'unrestricted' authorization level, etc. The following is the log in the end of the log file:
=== Logging stopped: 8/28/2009 20:47:34 ===
MSI (c) (F4:9C) [20:47:34:151]: Note: 1: 1707
MSI (c) (F4:9C) [20:47:34:151]: Transforming table Error.
MSI (c) (F4:9C) [20:47:34:182]: Transforming table Error.
MSI (c) (F4:9C) [20:47:34:182]: Product: BusinessObjects XI Integration for SAP Solutions -- Installation operation completed successfully.
MSI (c) (F4:9C) [20:47:34:198]: Attempting to delete file C:\DOCUME1\I819800\LOCALS1\Temp\1\8c3e2e1.mst
MSI (c) (F4:9C) [20:47:34:198]: Unable to delete the file. LastError = 32
MSI (c) (F4:9C) [20:47:34:463]: Grabbed execution mutex.
MSI (c) (F4:9C) [20:47:34:463]: Cleaning up uninstalled install packages, if any exist
MSI (c) (F4:9C) [20:47:34:510]: MainEngineThread is returning 0
=======================================================
So if the above transforming table error means that the installation is not successful?
Thanks,
Vicky -
Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I was prompted to update itunes this evening. I did and in the process, it came up with the following error message: Service "apple mobile device" (apple mobile device) failed to start. Verify you have sufficient priviledges to start system services. I unistalled itunes completly and reinstalled but am still getting the same error message. If I click "ignore" the program will finish downloading but will not launch due to "not being installed correctly". Please help, I use this program alot with my first grade classroom and they're expecting their listening center in the morning.
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Hello All,
I am having a problem when downloading ITunes on my Dell Inspiron 6400, an error message appears which says Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systems services. I have uninstalled ITunes and downloaded software to clean the regitry. This did not work, I even went into my local Apple store in Manchester, they downloaded ITunes onto a CD but it still does not work.
I am going on holiday on Wednesday and would like to have my songs on my Iphone before then.
All help would be greatly appreciated.
Thanks
PaulTry the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I was getting an update and it would not load so I tried to uninstall and reinstall. Now when it reinstalls it gets to the end and it comes up with the following error message.
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
This is on my desktop that I have had for a number of years that has had itunes for a number of years. I have an two ipods and an ipad associated with the itunes account. Now I can not get it to go past this message.Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
New update fixes heat & battery life???
Seems to for me....the airport/security upgrade that is. My MBP def seems to have better battery life and seems to run a little cooler. Strange, but i'm not complaining.
-
How to Update Picture column in User Information List?
Hi, The user updated his profile picture in mysite about 10 days ago. The updated picture is shown on his mysite but the same is not in sync with User Information List. The 2 timer job which takes care of the profile synchronization are scheduled as
-
Hello all, I would like to know what the functional design document is about. What is the use of functional design document? Pl. post any link or documents related to it. Thanks, Maxx
-
Channel Data filters in DIAdem
Hi All, I am having NI DIAdem installed in my system. I am having data to be analysed in .csv format and the same data i am able to see in DIAdem. There are number of channels in this data. There are Channel filters in DIAdem at the top right corner
-
NEW FORUM DESIGN: Post Feedback Here
Posting everything in one place will allow Comcast to better monitor what feedback is given.