2 Slight problems with SB Audigy 2 and Logitech X-

Here's the first prob, my speaker set used to work perfectly fine, but one day, I unplugged my X-620 speakers, and used headphones, after re-plugging my X-620 speakers, I realised that the subwoofer and rear right speaker are ALWAYS on, when I turn down the knob on the speaker set, they are still very audible, if I take CMSS off, it stops this from happening, but I don't get any noise from my rear speakers, is there anyway to make it so that the speakers behave normally, because the sub and rear right are audible when vol is 0, the sound becomes really distorted when I turn it up loud.Second problem is regarding Norton Antivirus, I think my SB 2 software is inerferring with Norton AV 2005, could this be true?

hmm.....don't think I understand what problem you have fter reading your post. Have you disable CMSS?Message Edited by justaguy on 0-04-200706:50 PM

Similar Messages

Slight problem with DWM, terminator, and weechat

So obviously I use arch linux. My WM is dwm. I am using terminator for weechat so I can copy/paste. Only problem is I can't use ALT + left/right of the arrow key to navigate the channels on weechat. Anyone else have this problem or a solution?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Audio latency problem with VST, SONAR and Audigy 4 PRO

Hello all,
I have a slight problem with audio performance on my computer and I can't isolate what is wrong. I am using Cakewalk SONAR 4 studio edition, and a recently purchased Audigy 4 Pro soundcard. ( I know it's not quite professional grade, but it works well for me) I recently bought some string instruments from the Vienna Symphonic Library. So far, I love the sound of these "virtual instruments" if you will. The problem comes when I try to record them. I get stuttering and dropouts when I try to record the track in Sonar. I've tried the WDM drivers in 16 and 24 bit modes and the ASIO drivers (which apparently only support 16 bit!?) I know Creative has mentioned that these cards can record easily at 24/96 which is what I'd like if possible. Vienna instruments come in a 24 bit format. Is there something I'm doing wrong or do I need to seriously consider a different soundcard? I use Sonar to bring in the Vienna instruments as a VST. I also apply a reverb on it. When I just play this stuff on my MIDI keyboard, it all sounds great and keeps up. The moment I go to record though, I get dropouts after about 15 seconds or so. Also, is there no way to get ASIO 24 bit support for creative's consumer level cards? I'd be happy with the WDM's personally if those would work. I've looked into the KX project as well but haven't had a chance to try their drivers yet. On a different note, what are the significant differences between ASIO and WDM if any at all? (aside from supported bit rates) My current computer setup is quite powerful and I don't use much CPU power at all so I don't think it's my setup. Intel E6700 (2.67Ghz) Core 2 Duo, 2GB DDR2-800, 320GB Seagate SATA in RAID 1, Nvidia 7600GT, and Creative Audigy 4 Pro. Any help, or insight would be greatly appreciated!
Matthew

Audigy 4 Pro should support 24-bit/96 kHz w/ ASIO --> have you selected those I/O drivers in Sonar audio settings (Options-Audio-Drivers -tab). ! You need to unselect all I/O drivers first to get those 24/96 drivers selectable)?
Dropouts comes from various sources. Have you checked if the read/write caching is set properly (Sonar, try different settings)?
Stuttering may come from shared IRQ/resources and PCI Latency settings.
If your graphics card is not PCIe then, make this registry tweak
Run regedit and search the key named as DisableProgPCILatency
- set all 'DisableProgPCILatency' key values to 1 (HEX or DEC) (1 = disabled, 0 = enabled)
- boot to BIOS settings and find the "PCI latency timer" option --> set its value to 32 or 64 (this is global PCI latency setting)
- reboot
and check the IRQ situation. If there are IRQ shares between Audigy and other devices/controllers, try to get those fixed by disabling unneeded controllers/devices or by moving the Audigy into another PCI slot (PCI slots #3 and #4 are normally not shared).
Couple meaninful differences between WDM/KS and ASIO are;
- you can't get latency lower than 10 ms w/ WDM/KS (well, you can in Sonar by manually editing those buffer values but, the result is not good when you go under 10 ms buffer values (buffersize / samplerate * 1000 = latency in ms --> 512/96000*1000=5.33ms)
and
- you can record from one stereo (you can split this to two mono) source at a time w/ WDM (recording source is set in CT Surround Mixer (or windows recording controls))
- ASIO supports (Audigy serie) locked 'resolutions' only - 16/48 or 24/96
Also, tweak your system for music - http://www.musicxp.net/
Some information on CT ASIO -
http://forums.creative.com/creativel...essage.id=1726
jutapa
Message Edited by jutapa on 12-17-200606:01 PM

Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi

Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/

HalberdBlue wrote:
Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
jutapa

MSI GF615M-P33 problem with sb audigy se

Hi everyone
First of all in case it's useful, here's my system:
Windows xp sp2 32bit
AMD Athlon X2 240 2.8GHz Socket AM3 2MB
MSI GF615M-P33 GeForce 6150SE Socket AM3
Asus Radeon X1550 512mb (old card works fine)
Sound Blaster Audigy SE
Crucial 2GB DDR3 1333MHz/PC3-10600 Memory CL9 1.5V
0 Maxtor 80GB SATAII 7200rpm 8MB Cache
1 Maxtor 250GB SATAII 7200rpm 8MB Cache
G7 680 watt psu
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35).
I had a look at what I think is the bios version according to the boot screen A7597nms V2.0 123109 (does this look right?). Also, the advertised version of my board had a red pcb, mine is black and the version is 1.2, don't know if that's important, mentioning anyway.
Now I know the card works with the board because I did something slightly different, (just to see if it would work and save time). After building the computer I didn't reformat the hard drive from the previous mother board, just plugged it in and installed the new chipset drivers etc. Everything fine, soundcard working, except the cpu was only in single core and running very cool; less than 30 degrees c. So, decided to reformat properly, all good, cpu in multi and running around 40 degrees c, but just this problem with the sound card.
Another difference I notice is in windows control panel under Power Options I can't enable 'advanced power management' the option isn't there, so have to switch of the computer manually (which isn't a major problem). In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
Anyway, to the point. My question is: do I need to update the bios to 2.1 or would it be better to buy a new sound card. I've tried various bios settings and updating the drivers but makes no difference. I've even reinstalled windows with acpi enabled, again, the same error code.
Any help/questions much appreciated. Hope I've explained this well enough.

Quote
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)
Quote
In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
What HAL is installed? Look in device manager under "Computer"

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Sound problem with the Audigy 2 va

Hi, I have asound problem with the Audigy 2 value. most of applictaions I played got sound. however, when I play FS2004, the sounds come on only the ATC voice in game playing, 5sec after the voice over, the sound is gone, and only when another voice is playing, the sound comes out. please helps out.

Shedden,
I would suggest going ahead with a cleansweep and reinstall of the card. Here are instructions on how to cleansweep and reinstall your sound card:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Weird problem With my Audigy 4

Hi all, I have a weird problem with my audigy 4. When I install the Nvidia IDE and Sata driver for my motherboard, I get sound problem in BF2, It glitches, I don't here my gun, well it's all ****ed up. Does anyone know why?Thanks in advance.

I have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

2 Slight problems with SB Audigy 2 and Logitech X-

Similar Messages

Maybe you are looking for