2 small wishes with the soonest update.
Dear Apple!
Probably not only me, but many people will be very satisfy from below mentioned new options in our iphone.
1) Searching ipohone with contacts by keyword added to the notes field.
2) Alternative signature for my comapany exchange acc. and for example Gmail.
Hope it's not a problem and we will get it in the near future.
Thank you in advance.
Best regards
Dawid
You are not addressing Apple here. This is a user forum. We are all iphone users like you.
You can leave feedback for Apple at:
http://www.apple.com/feedback
Similar Messages
-
10.4.11 Has Apple addressed/fixed issues with the latest update to Tiger?
Like many of you, I installed the 10.4.11 update last weekend with disastrous results. I eventually had to Archive and Install and my machine seems to be recovered. Has anybody had this problem and gone on to try the update a second time with better results ?? Any words of wisdom?? or had some sort of feedback from Apple to indicate they have or are going to resolve the problems with this update.
+I just posted this on the thread that seemed geared to those who "had success" (many more than half had issues) with the recent update after pi55ing and moaning due to crashing several times while trying to post there. Subsequently I found this thread and a bit of absoultion. I have eliminated the links, thinking them redundant but they are posted to that thread.+
"If stupidity got us into this mess, then why can't it get us out?" "
- Will Rogers (1879-1935)
A little story, when I first tried to install Jaguar on my then Beige (Yeah, remember them!) G3 MT, it took me a full six months to get that "Darn Cat" in that house! Oh, how I sweated and swore, you talk about "legacy", I waved every "dead chicken" that was suggested to no avail. Ended up that before I bought the unit someone had switched out the CD/ROM for one from one year later, still Apple issue, mind you. I sent to OpAmp and got an original and "The Cat" slid in as quick as grease through a goose. That's how tightly wound Apple was and still is in many ways and is why they stopped the clones. This was one of a slew of many little things you had to get used to in "Mac Land".
One other small thing you used to do a "clean install", you still can, but under OS 9, after you were satisfied (Conflict Catcher made things ever so easy!) all was peachy, you could simply trash your Previous System Folder and get back some valuable disk space. Well not to long after my success with the install of Jaguar and still not understanding OS X at all, I was still working mainly in OS 9, I did a Clean Install on my OS X, horsed around with settings which was difficult without Conflict Catcher and bravely trashed my Prev Sys Folder. Don't ever, EVER do that. What is a seemingly empty shell but for redundant Apps and meaningless abbreviations, is indeed a necessary if gigabyte eating Albatross you are doomed to carry!
My point with these two parables is that we are creatures of trust and habit, living on borrowed time. We have been blessed with a computer system that is virtually foolproof given certain caveats, caveats if adhered to even marginally would guarantee success. I my self have gotten into some very bad habits of late and think that this may be the cause of my computers malaise.
Drop to your knees and be grateful you don't have a PC (shudder!)! Yes Virginia, there is an Insanity Clause! I just installed WinXP on an Intel Mac, and after it was over all I wanted was a stiff drink and a shower!
+There's always something worse than he77, there's always Vista!+
Message was edited by: fla_cracker -
Bad Form from Apple with the latest update
Update 11.1.4 was obviously released without being fully tested.
Given that it was released in early January and it is now the 29th I would have thought Apple would have given a "fix" top priority.
I wasted a huge amount of time and effort redownloading and trying many different things before giving up in frustration.
Eventually I managed to locate a post made by Turingtest2 on the Support community which allowed me to fix the problem. Thank you Turingtest2!
Why is Apple relying on its customers to solve its problems?Hello sfhowes,
Thank you for your response.
I have looked into this thread that you've suggested earlier, but I'm hesitant to download a 3rd party application to fix the problem.
This thread also references much longer hang times for autocomplete.
What we're seeing in our office is very small, on the order of 0.1 seconds.
It's enough of a change though that it's causing headaches in our office b/c we were used to instantaneous autocomplete.
The preferred solution would be to have Mozilla undo or fix the change that they made that resulted in the decreased performance with the latest update. -
I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes) When I do this it wants to restore my ipad, which I have already done. I can't get out of this screen. Any hints on what to do next?
Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarneySorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html -
My ipod recenly froze with the last update. bestbuy gave me a replacement. the new one will not connect to the computer or itunes. i followed all the instructions and - nothing. It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes. i don't get it. i'm not a supertech so i don't know what to do. help!!!!!!
Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them! -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Is that even a thing? Is there another app I can download to have access to my contacts with imessage?
That comes with iOS 5 (Settings>General>About>Version) and only the 3G abd later iPods can go to iOS 5 or later
Identifying iPod models -
With the new updates for iTunes, I can no longer print a CD case playlist when I burn a CD. It prints in a jumbled mess. I have reinstalled, updated, run diagnostics on my NEW printer, I am out of ideas!
It appears to be a bug with the current build. Hopefully it will be fixed in the next release.
tt2 -
Hi everyone,
I've recently updated my iphone 4s with the ios7 update and there was a bug fix I also downloaded recently but I hadn't noticed anything wrong at the time. I know it's not happened that often today but does anyone have any problems with their 'slide to unlock' button and have to reload their iphone again? Do you think there'll be a bug fix for it? Just worried as it's not old and I have a feeling I shouldn't have bothered with the update at all.Why would you think it's a bug? If it were a bug EVERYONE would be having the same issue.
Basics from the user guide are restart, reset, restore from backup, restore as new. -
I updated my iPhone with the new update..and then it turned off...instead of turning back on it tells me to plug it into iTunes..and when I do iTunes tells me that my phone is in recovery mode and needs to be restored..is there anything I can do without restoring it?
Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.
-
How can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible
how can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible
It's still not known if and when Google Maps becomes available in the AppStore. This is today's story: http://www.macrumors.com/2012/09/25/google-has-not-yet-submitted-a-google-maps-a pp-to-apple/
-
Problems with the windows update site in 32-bit Vista Business
Hi Everyone,
I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.hello
You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).
Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser! -
I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file. The thumbnails are white with a blue and white CR2 on them. Please help.
Adobe Camera Raw 5.7 is the latest for Photoshop CS4 Adobe - Photoshop : For Windows
The problem is that your new camera is supported by ACR 8.7 and only Photoshop CS6 and up supports this version.
So if you do not want to buy CS6 or subscribe to the $10/month Photography Program, you have to convert the CR2 files to DNG to work on them. Your original CR2s are untouched in the process, you just can't directly edit them in CS4, only the DNGs.
Maybe Canon offers editing software for their CR2s, but CS4 is not going to be updated and there is no way around that.
It's not what you want to hear, but that's the situation so far.
Maybe Elements or Lightroom has updated raw support for your camera, so I encourage you to visit those forums and ask.
Gene
Maybe you are looking for
-
Hi Experts, The "select user from dual" causes "library cache: mutex X" contention. Is this normal behaviour? Any bug? Thanks for sharing your thoughts. Regards, Richard
-
Mail Not Caching Loaded Images
Running Leopard and Mail 3.1 with multiple IMAP accounts: So I like Mail's ability to NOT load images when I first view an email... it's a great way to avoid massive amounts of junk mail. My problem exists when I've told Mail that I DO want to load t
-
Lightroom 4.3 and Default Raw from 6D
Hi I'm new to lightroom and I'm experiencing a problem with LR. It appears LR modifies/renders my raw images by default for lack of better words, below is a picture of the same photo compared side by side with the default canon software, LR seems to
-
The Creative website doesn't have the AC adapater for the Micro Photo in stock, and hasn't for some time. I've seen a ton of "generic" AC Chargers on Ebay going very cheap. Does anyone use these, and how do they work? How long to charge a Micro Photo
-
Coorilis / Phoca / crossdomain.xml help please
Hello everyone, I am using Joomla with Phoca Gallery. It has cooliris embeded into it for a nice way to display your gallery. It states I need to put the crossdamain.xml file into the root directory. I have done this. I am using 1&1 Web hosting.