2 Sony Devices, No Longer Seen By iMove, or Mac G4 Dual 1 Ghz Machine..

Question

Hi There,
I am having a hard time, and my computer is acting very un-Mac like.
Sometime between the beginning of November, and now, something has changed in my system which makes, iMovie,, Final Cut Express, and My G4 in general, no longer see my Sony Camcorder, or Sony Digital 8 VCR.
I just did a big project at the beginning of November, so I know it was working.
What I've done to try to rectify it, so far.
Can an Security update cause such a problem?
Repaired permissions, Zapped pram, remove battery for pram, reset open firmware, brought the firewire cord in question to our local Apple store, and it seemed to work fine, booted in safe mode.
My iSight camera works fine, but I am going to need to import more video soon, and I'm kind of at a loss..
Any help, or advice would be appreciated..
Happy Holidays,
Eric
PS I'm going take out the pram battery overnight for good measure. Or overkill.

Answer 1

Hi
When I burned my two Cameras I also could control FW, play, BW BUT no picture.
That's why they had to be tested on another Mac. It's the A/D chip in the Cameras
that died for me. Everything else worked OK. Recording to tape (normal
filming) play back via analog port etc.
Here is my full trouble shooting list.
May be You find some help in my list:
Mac:
- hardware
◊ Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
◊ I wonder how full your Mac's hard disc is. (David Babsky) A near full hard disk prevents Import/Capture.
10% free is recommended + space for Import/Capture + work space (about 4 to
5 times the amount needed for Capture) eg on a 200Gb hard disk You need 20Gb + (one hour tape)
13Gb + 50Gb = about 80 to 90Gb free space.
◊ Disconnect all other ext devices (FW and USB) exept Camera (and keyboard + mouse) and try again
◊ Reset PRAM
◊ Bad RAM-chips
◊ disconnect Mac from powerline (not just switch off, really plug out) for a few minutes to reset FW ports
- software
◊ File-Vault is on - turn it off
◊ Something is occupying the CPU/System, like other programs, Internet etc.
◊ Do You have desktop pictures or screen or energy-savers active? Try turning them off.
◊ Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good) OS X.4.0-5 needs a clean install to work (I use X.3.9)
◊ Updating QT and/or other updates (to 7 needs v6 to be cleaned out first) QT v.7.0.0-4 needs a clean install to work (I use 6.5.2)
◊ Have you tried the crazy fix: Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. Sue/SDillini
◊ Running iDVD at the same time as iMovie can cause problems: (Lennart Thelander)
◊ If You also have installed FinalCut Express/pro there are possibly problems with this
◊ Did You select the right sort of project? DV, DV Widescreen, HDV 1080i , HDV 20p, MPEG-4 or iSight.
iMovie:
◊ remove bookmarks in iMovie project
◊ Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
Connection:
◊ don’t Daisy chain Camcorder <--> external hard disk <--> Mac
◊ FW-wire cable, is it OK?
◊ USB/USB2 is NO GO !
◊ Cheque FW connection at Camera end. OK? (Adam Smith1)
◊ Cheque FW connection at Mac end. OK?
Camera:
◊ The Camera is set to VTR ? (not as when You ”film” record with it)
◊ You may be need to go to the Camera menu and select digital out.
◊ defective camera TRY IT ON ANOTHER MAC ! (if the A/D chip in the camera is harmed then it will say in iMovie that the camera is connected and You can forward resp. backward the tape but there will be no picture or sound just the blue screen).
◊ connect camera to power-line, not battery-only....(Karsten Schlüter)
◊ Canons don't allow daisychaining on firewire, make it "only device" on port (Karsten Schlüter)
◊ Cheque the menu on Your Camera so that it communicates with the FW digitally to Your Mac
◊ Date and Time is correct on Your Camera ?
Tape:
◊ Drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
◊ Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is pre-recorded with nothing/anything so that the tape has a time-code from beginning to the end)
◊ If You recorded in LP-mode (90 min on a standard 60 min tape with 12-bit sound). Try to change in iMovie pref. to import but not as individual clips. If this doesn’t work You have to make a Camera to Camera copy with the receiving Camera set to SP-mode and 16-bit sound.
More:
◊ follow advises here http://docs.info.apple.com/article.html?artnum=43000
◊ follow Grandmaster Dan's advice for Sony cameras here: http://www.danslagle.com/mac/iMovie/usage/5020.shtml
NEWS: Jerry Harris writes:
I know that in a lot of the new Sony HD cameras, iMovie requires that you turn iLink Conv off. I would look for a similar setting for your camera. This setting has to do with shooting a movie in one format, and using the camera to import as a different format. For instance, if you shoot HD footage and have iLink conv on - the camera will send DV to the computer etc...
So, case in point: look for a setting on your camera that has to do with the video format and see if that helps.
I had a similar problem -
Macbook + iMovie HD + HDV Camera = No import
Took me a little while to work out that the project file I had opened and was trying to capture into was set to DV and not HDV 1080i, hence iMovie was not detecting my H
DV camera's signal - hence always reverting to the isight camera.
Try opening a new project. At the filename dialog box, you should see an 'options' button which should allow you to select the appropriate video format depending on your needs. You should be able to choose between DV, DV Widescreen, HDV 1080i and HDV 720i. Choose DV or DV Widescreen if you're about to import from a DV camera. iMovie's default might be HDV.
All the best!.. ”ahroyboy”
It seems I've probably got a loose or damaged pin on the firewire connector. I happened to place the camera/dock/cable in a position where it was able to connect, and even import.
Something else to add to anyone in a similar position is to take a look at your system profile when the camera is attached. This is how I realized that it was talking to the laptop finally, but it would be a good debugging step - if your computer can see the camera, it's likely not in the physical setup. ( CraigP )
This camera will not be recognised by iMovie, as the HDD format that it is recorded in, is not standard video file. All you can do is, connect the camera to firewire then:
- open the camera, like a hard drive from the finder or desktop.
- import footage to the computer in movies, or anwhere you choose.
- sometimes HDD camera footage can be imported directly to iMovie.
- may have to convert the video, in a third party application.
- then drag and drop video into the iMovie oane on the right side.
Had a customer with the same problem once and this was the only method of importation of video footage, the photos come into iMovie great but the video, was a headache.
Anyway this should get ya importing Bach Goldie
Yours Bengt W