2 step picking - Allocation step - Order of TO generated

Hi,
We have just turned ON 2 step picking to optimize the picking process at our warehouse. We are facing an issue in the allocation step of the 2 step process w.r.t the order in which the TO's are being generated. We are creating single TO for each article of the delivery. When the TO are generated they are in the order as below
TO 1 - Article 1 - Site 1
TO 2 - Article 2 - Site 1
TO 3 - Article 3 - Site 1
TO 4 - Article 4 - Site 1
TO5 - Article 4 - Site 1
TO 6 - Article 1 - Site 2
TO 7 - Article 2 - Site 2
TO 8 - Article 3 - Site 2
TO 9 - Article 4 - Site
2 TO 10- Article 4 - Site 2
TO 11- Article 1 - Site 3
TO 12- Article 2 - Site 3 etc.
This is not the desirable result. We want the transfer order to be generated in the order of all article 1 first for all sites, then article 2 etc in the below order.
TO 1 - Article 1 - Site 1
TO 2 - Article 1 - Site 2
TO 3 - Article 1 - Site 3
TO 4 - Article 2 - Site 1
TO 5 - Article 2 - Site 2
TO 6 - Article 2 - Site 3
TO 7 - Article 3 - Site 1
TO 8 - Article 3 - Site 2
TO 9 - Article 3 - Site
3 etc.
I have tried various options in the sort profile but this is yielding the desirable effect. Also each site has its own delivery number.

I am unable to understand the issue which you mentioned. Could you please provide the steps detail along with the T-Code and at which step you are expecting system to give the result as mentioned above

Similar Messages

About second step picking in Transfer orders

Hi Guys!!!!
Does anybody know some function or BAPI that confirm transfer orders with second step picking ? i found one that maybe could works fine "L_TO_CONFIRM_SU" .
I promise to Reward.
Regard...

Hi Aktar,
I am looking to implement the 2 step picking process for my Production line. My warehouse is in a different building and i want to stage the materials/components for the production orders of the day in the morning.
I have activated the 2 step picking for the warehouse and also changed the material movement 850 to have a destination storage type as 200. But i am unable to complete the process.
Do you have a step by step guide which could help me do this?
Your help shall be appreciated.
thanks and regards
Vikram

2 Step picking process

Hi All,
My understanding of the 2 step picking process is as follows ...Please validate if this can still be lean in terms of nos steps that need to be performed...
1. Create Wave Pick VL35 / VG01   create group / create from VL06O by selecting all the deliveries
    LT72 --Determine 2-step relevance
    LT73 --Display 2-step relevance
    LX39 --2-step picking monitor
    VL37 --- wave monitor ---Hit Picking progress for to it
*Removal part*
2. LT0E -- Creating removal TO with MvTyp 850
      One Removal TO created
      Now check TO with LT21 ....notably Dest Storage typ 200
      Now again check LX39 ---drill-down the tree structure of the Pick Section ....TO created ...not yet confirmed
                                   --- Allocation section --procedure not yet started
3. Now do LT12 ---for confirming the TO upon the physical PICK
       Then check LX39 ---Pick section is all green
Allocation Part
How to identify & assign which item in the 200 stg typ area belong to which Delivery...Plz enlighten
4. Now do LT42 for the group 20000***** --Start Multi Processing to create equal nos of TO for each deliveries in the group
    Confirm those TOs
    Have a look at LX39 again ---Allocate section will be Green
===============================================================================================
What are the two choices to carry out the second step ??
Choice 1.... You can start the multiple processing function to create transfer orders for the group and move them all at once using multiple processing to the appropriate goods issue area.
(TransOrder ® 2-step picking ® Allocation/Direct picking ® Start group)
Choice 2.... When you release the group, (TransOrder ® 2-step picking ® Allocation/Direct picking ® Release / Print) you can select Allocation or Direct separately in a dialog box to move the materials for the second step. You can also print from this option.
Can anybody explain these 2 Chioces please ?
Regards
Jamna
Edited by: ABAP Techie on Nov 24, 2010 10:01 AM
Edited by: ABAP Techie on Nov 25, 2010 6:41 AM
Edited by: ABAP Techie on Nov 29, 2010 7:35 AM

.

2 step picking-can allocation TO be created for partial pick TO?

Dear experts,
For 2 step picking, let's say that I have 2 items in the pick TO which belong to different materials. I confirm only 1 out of the 2 items. Can I then proceed to create the allocation TO just for the 1 item which I confirmed or is it a must for me to perform full picking for all the materials in the pick TO before I can create the allocation TO?
Thanks.

Dear experts,
Can anybody help me?

WM Replenishment and 2-step picking with storage units.

Dear Colleagues,
I am attempting to use SAP standard fixed bin replenishment and implement it as a 2-step picking process. Generally, the process goes as follows:
- Generate replenishment pick tasks
- Place the picked products onto storage units in an intermediate storage type
- Put the products away from storage units into the respective fixed bins
I have setup the necessary parameters to get standard replenishment to work. I can run LP21 and generate all TR's, and subsequently TO's. The product moves from respective reserve bins into the fixed bins based on strategies that I have setup.
The issue i am experiencing is when I try to introduce the intermediate storage type to place the product into, before it goes into the fixed bins. Additionally, the intermediate storage type needs to have SUM enabled, so that the product gets placed onto pallets. This way, the warehouse personnel will be able to track the physical product movements before it is put away.
Any help in this matter would be greatly appreciated.
Best Regards,
HK
Edited by: Husein Kadribegic on Aug 4, 2009 6:49 PM

Hi,
I'm not sure your scenario is viable in (standard) SAP.
As I understand (e.g.):
- source storage type: productA 10 pc, productB 20 pcs, productC 30 pc
- intermediate storage type: SU1 (productA 2 pc, productB 17 pcs, productC 10 pc), SU2 (productA 8 pc, productB 3 pcs, productC 20 pc)
- destination storage type: bin1: productA 2 pc, productB 17 pcs, productC 10 pc, bin2: productA 8 pc, productB 3 pcs, productC 20 pc
Please notice that SAP determines the to be removed quantities (~corresponding to SU1 & SU2 but not as SUs) when you remove the goods from the intermediate storage type ("allocation") and not when you place the goods into it.
Please also notice that automatically you cannot create storage units (palletize) with different products on it (I'm not sure this is requirement in your case or not).
Please check this link where it is explained where to carry out customizing for 2-step picking and how it works:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Aug 6, 2009 7:01 AM

Hw to deactivate a valid cross-docking item i.e., 2-step picking

Hi Experts,
Hw to deactivate a valid cross-docking item i.e., the two step relevance should be de-activated for the delivery items. i want to convert 2-step picking to one-step picking based on elapsed time.
Be helpful. Its urgent.
Thanks & Regards,
Madhu

System will generate XD deliveries once you do the goods receipt against Vendor Purchase Order.In your case two outbound deliveries generated as you have to UB Purchase Orders.After Creation of deliveries then you tried to create the delivery through wf30 .As the deliveries created alredy you got error No entries found relevant to delivery generation;'
If you delete the deliveries then it is difficult to create new outbound deliveries.

2 step picking-SAP Wm

Hi gurus
In 2 Step picking ,2nd pick list is getting generated for Store-Articles wise (means for each delievery doc one pick list is getting generated) is it possible to have the 2nd pick list by article (not for each individual delivery doc ,but for article wise)

Hi All,
Here's the solution for this problem.
I have to go to SPRO > LE > WM > Activities > Define Print Control
click Multiple Processing then set PrStat to 4 (Print Picking List directly if all documents successful)
this prevents the system from printing picklist or releasing if Allocation is not completed.

2-Step Picking without using Groups

Hi all,
Does anyone know if it is possible to implement a 2-step picking process that does not require creating and processing by groups?
I have a process which is not exactly 2-step picking, but the functionality supports it - except for the requirement to create groups for the TRs.
For my process, I want a one to one relationship between the removal TO and the picking to destination TO.
The reason I need two TOs is because during confirmation of the removal TO, I need to identify a specific bin where the stock will reside before the second TO picks it from there. There will always be a one to one relationship between the two transfer orders.
Any good ideas for a solution? I'm open to other suggestions.
Regards,
Mark.

The business process is as follows:
Production orders generate requirements to provide materials to production supply areas. Upon production order release we create TR in warehouse.
Stock is picked from various locations in the warehouse to a "train station" where is it loaded onto a train.
The train is then driven around the manufacturing site on a specific route and inventory is dropped off at each PSA until the train is empty.
There are several different train routes.
The requirement is for a train driver to know exactly what is on the train and to have a program which shows him what TO items are loaded and then sort those items by route/PSA sort sequence to send him on his way.
There is always a one to one relationship between the pick from warehouse inventory and the requirement at the PSA.
I was hoping to use two transfer orders - one picking to a storage type that allows you to change the destination bin manually, where the destination bin = the train carriage, which would be confirmed when the train driver loads his items. The second TO would then be triggered automatically to take the inventory from the Train carriage to the PSA.
I was then going to build a custom scanning program which would look at all the items located in the bins relevant to the train in question and find the TOs, then queue these TOs according to the route PSA sort sequence.

Report for field sammg and refnr in two step picking

Hello Experts,
I have configure two step picking which is working fine.
But my concern is when I create a group from deliveries using VL06P, an five digit number (23717) is generated. But while putting same group number in LT72 screen for analysis or doing LT0E, I am getting en error that "this group number is not existing in system.
Then I have to go to SE16 and search in table T311. Then I found that there are two group number in this table which technical name are REFNR and SAMMG. So I have to pass 23717 in SAMMG field and note down the number (17) from REFNR field and process with REFNR number.
So is there any report whether I can get the same (when I pass SAMMG number I will get REFNR number) because my business user don't have access to SE16 again it is not acceptable to business.
Or is there anyway by which I can assign same number to both SAMMG and REFNR, so that my client will refer only one number in stead of two number.
I am hereby attaching one test data. Kindly go through it and revert to me with your analysis.
Best Regards,
Raghu Nayak.

as an standard SAP you should be able to process the group number(23717) it seems there is some other setting / customization or you are following any additional steps in your system which generates the another number in Group (REFNR) field of T311 as in my case i am getting the same number in both the Group field
Have a look on the below mentined existing wiki which was shared earlire by SCN member Susheel Tiwari / Pankaj Agarwal
Two Steps Picking Process in SAP-WM

Picking two-step type of material on consignment

Hi experts
I have a problem with the processing of materials on consignment at the time of the assignment sends message: Unable to determine location.
when the force generated OT be displayed on the field LT03 Stock Special (SOBKZ) is in white, and also the special Stock Number field (LSONR) that would be the supplier code of this blank.
Anticipation is running the store takes 701 to 200 and the program work well.
when I run the allocation step 2 with the movement of 601 a outlet delivery of output gives me the error.
Please any indication. thanks in advance.

Thanks Csaba Szommer,,
the material that you work is an appropriated of supplier
1 .- The error that comes out is the number L3 008 has not been able to determine location.
2 .- The strategy of the first shot goes well, I attached the lot predefined in the delivery of output and well-executed strategy to get the material from shelves
119 A ESF k 701 101 104
3 .- The system takes the material of the type of store 701 and brings it to the 200 with a fixed location, taking the number of group linked to the supply of output.
4 .- by the LX39 I run the second step allocation, at that time that I run the collective process, the system tells me that has not been able to determine location.
5 .- Seeing the protocol for determining locations tells me
119 2 ESF 200
if he realizes not see a particular stock's identifier K, therefore the system routed to the stock itself when the material is consigned. therefore can not identify the Lot proposed in the delivery of output.
si me puedes decir tu Imail te puedo enviar copy de las pantallas

Two step picking modification

Hi all,
Three simple questions on two step picking:
1) When I delete a pick TO inthe first step of two step picking process the status of pick step on the group still reamains completed and I cannot create pick TO again. How to sort out this?
2) If the pick TO is not created yet I'd like to add another TR to the group. But I didn't find a change group transactions. Once the group is created, it looks like no modification is possible but editing two step relevance on some group's item. How it is expected to do this?
3) How to set a storage type not relevant for two step picking? I've seen that only materials can be set as relevants for two step picking.
Best Regards

Hi
Let me explain how two step picking works
Within the 2-step picking process the first step can be repeated many
times because changes of the assigned deliveries may occur or the
requested quantities are not completely available the first time but
the 2nd step the actual picking is done once and marks the completion
of the process. This cannot be repeated for the reference number. If
there are individual delivery changes the TO can be created using LT03
but the multiple processing is no longer possible.
TO confirmation takes place only when the stock is completely moved.
It would not make sense to confirm the movement and then to the
allocation step. The two-step picking process is
1. Pick step (Where stock is picked from the source bin)
2. Allocation step (Where stock is allocated in the destination bin)
3. Confirmation (Where the picker confirms that the movement has been
completed)
You either carry out the first two steps seperately (2 -step picking)
or at the same time. Either way, the confirmation always takes place
last. Hope the above helps to clarify.
Regards,
Ramana
Edited by: A.L.V Ramana on Dec 18, 2009 1:05 PM

Warehouse RF and 2 step picking

Hi Guys,
I have set up wm mobile in ecc 6.0 and also have 2 step TO's working manually but can't get them to work with a scanner.
I have one storage type one side of the road and one the other but they all form part of the same warehouse in SAP. They move items between them using mvmt type 919 (replenishment) and i want them to pick in one store and confirm in the other by a different person
Is this possible or is 2 step picking not what i think it is?
Regards
Daren

Hi,
I'm not sure your scenario is viable in (standard) SAP.
As I understand (e.g.):
- source storage type: productA 10 pc, productB 20 pcs, productC 30 pc
- intermediate storage type: SU1 (productA 2 pc, productB 17 pcs, productC 10 pc), SU2 (productA 8 pc, productB 3 pcs, productC 20 pc)
- destination storage type: bin1: productA 2 pc, productB 17 pcs, productC 10 pc, bin2: productA 8 pc, productB 3 pcs, productC 20 pc
Please notice that SAP determines the to be removed quantities (~corresponding to SU1 & SU2 but not as SUs) when you remove the goods from the intermediate storage type ("allocation") and not when you place the goods into it.
Please also notice that automatically you cannot create storage units (palletize) with different products on it (I'm not sure this is requirement in your case or not).
Please check this link where it is explained where to carry out customizing for 2-step picking and how it works:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Aug 6, 2009 7:01 AM

Two-Step picking in Lean WM.

Hi all!
Is it possible to configure two steps picking when you have a Lean WM implanted? My client wants to explore the possibility to use this functionality in his warehouse, but he has a lean WM, not a full one.
I have configured IMG --> Logistics Execution --> Warehouse Management --> Interfaces --> Shipping --> Two Step Picking
In my tests, I have grouped the deliveries and when try to create the correspondent TO, system sends a message saying that it is not possible in a Lean WM.
We are using SAP ECC 6.0
Thanks for any help.

Hi
Lean warehouse management implement for the warehouse where proper storage bin (High rack structure or location management) are not available and user want to do the picking using pick list. In this case there is a dummy bin defined in the system which helps the user to group the deliver and create a transfer order.
To leverage the 2 step picking functionality of warehouse management you should have proper location management ( Warehouse management) activated.
Hope this will help
Regards
Manish

Warehouse Managment (Two-Step Picking)

Hi,
This is with reference to Two-Step picking procedure, which is not getting activated. Though we have done all customization required for TR and Deliverys as well, as referred in the documentation provided by the SAP. The settings done are as follows.
01)     Activation of Two-Step picking at WM Global level.
02)     Transfer Requirement control
03)     Transfer type control
04)     In article master, relevant for two step picking.
05)     At Storage type search level.
Now when try to initiate the process with transaction LT41 putting shipment type i.e. A (Stock Removal) system displays a message No data available for the specified criteria or if thru LT0E, system asks for a group in WM.
But when we go and try to create the single TO thru Delivery using t_code (LT03) system displays an information message, i.e. Two step picking relevancy will be lost.
Regards,
Aquil Husain

Hi Aquil
Have you set up Group processing for TR and Deliveries?
In order to manage 2-step picking you have to work with groups / collective picking
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Have a look at the help to review the process
Regards
Steve

WMS Problem with 2 step picking

Hello Expert,
In WMS I activate the 2 step picking. I have created a group of delivery and make a trasfer order with the total quantity of the deliveries. I create the trasfer order on 2 picking phase and I trasfer the material on storage type 200 with movement type 850. I confirm the trasfer order and I see the stock on storage type 200. The problem is that i cannot create the individual trasfer order related each single delivery. I tried with VL37 wave pick monitor but I get no output from the program. Any idea on where is my mistake?
Thanks
Josy

Hi Josy
Sorry I can not answer your question since I met problem when creating TO for the group. Can you tell me which t-code you used to create group? I created the group via VL06P, from the menu - subsequent function - group and then create.(group type K). After that I go to LT0E for the first picking. But when I enter the group number, system notice me the group number is not exist in table T311. Do you know why?
thanks a lot.
Tony

2 step picking - Allocation step - Order of TO generated

Similar Messages

Maybe you are looking for