2 steps STO - Load Transfer Points

Hi gurus,
Could you please advise how we could manage below flow.
We would like to have a kind of 2 steps STO in case we have to deliver from Plant A to Plant C (STO with vendor Plant A and as receiving plant, Plant C) but we have to transit by Plant B...
. STO1 is created between Plant A and Plant C (Plant A > Plant C)
. Physically: Plant A > Plant B > Plant C
. For STO1, the goods are transiting by Plant B and combined to other goods directly issued from PlantB
. We would like to track the fact that the goods of STO1 are downloaded from the truck into Plant B but in fact we can not yet post the GR because the initial STO has been created for Plant C and not Plant B. The Plant B is only a transit point...
This kind of flow will happen in case the truck leaving Plant A to Plant C is not full and that we have the opportunity to add some goods from Plant B in order to have then a full truck leaving Plant B towards Plant C.
The questions are:
1. How can we design that the truck leaving Plant A to Plant C and which is not completely full needs to transit via Plant B. >>> Routes ? Is it possible to use "load transfer points", how can we then see the different steps of the goods? In the Outbound Delivery? In the STO ? In the shipment ?
2. We also want to be able to track the different physical statuses of the goods.
Thanks for any ideas that could help us.
Regards,
Karim

Just a precision, I'm actually on a R/3 4.6C system.
Regards.

Similar Messages

Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

Dear All ;
I am Planning to use Movement type 301 ie single step STO Beteeen two different company code at the time of Cutover .Is it a feasible solution ?
I am Currently handling a Org Restructuring Project ,Where one company code will be broken into five different company code ( Including Old Company code ) ,and old som of the stock of old company code needed to be shifted to new 4 company codes .
In this Context i am thinking to use 301 ,will it be a feasible solution ?
I have tested in IDES ,It is working ,But I need to be confirm as there is hudge data to be migrated .
Best Regadsl;
Joydeep Mukherjee

Hi Joy,
You can do this in one step as you already have tested in IDES, but depends on your business requirement that in which way you want to handle your stock transfers either by using one step or two steps movement types or by using stock transport orders. Using STO is a good approach for stock transfers between two company codes.
See the below link:
http://help.sap.com/saphelp_45b/helpdata/en/a5/63391843a211d189410000e829fbbd/content.htm
regards,
anoop Singh

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

Steps to load the data by using flat file for hierarchies in BI 7.0

Hi Gurus,
steps to load the data by using flat file for hierarchies in BI 7.0

hi ,
u will get the steps int he following blog by Prakash Bagali
Hierarchy Upload from Flat files
regards,
Rathy

One Step STO process

Hello All,
I wanted to know the logic regarding one step STO process.
while doing Post goods Issue :
1) system posts the 645 mvt type (which is maintained in schedule line category NC)
But i am unable to understand how system is triggering the 101 mvt type?
Please Suggest on this...... is it a SAP standard code which is calling the 101 mvt type or any settings in SPRO ?
regards,
sujit

Hi
its sap standard
645 Goods issue for a cross-company stock transport order in one step (Shipping)
a goods receipt line is generated automatically for 101
You post the stock withdrawal in the issuing plant and the receipt into stock at the receiving plant simultaneously. One material document is created
Regards
kailas Ugale

Step by Step guide to transfer movies to iPod - using PC

I am looking for a step by step guide to transfer movies to my iPod... i have a PC and need to transfer DVD movies to my iPod. i know that there is a process, somewhat tedious, but i cannot find instructions anywhere on the steps to do it. i purchased quicktime pro and i know that i need to decrypt the DVD (??) and rip (??) the files to my harddrive, then convert the .vob files to .m4v using something like Videora (??). I just am not sure about the actual steps. Please help!!!

Trying to help. I think you will find that any answer that gives directions here on Apple <might> be a contravention to agreements regarding licensing abp from Apple therefore your directions (and efforts) would best be spent on 'another search engine' for an answer to that question. Note that I am simply respecting Apple's position and the fact that movies are not free to rip or copy them for any reason outside of licensing agreements.
Sony Vaio Windows XP Media Stream and Production

SQL LOADER message : Point de validation COMMIT atteint - nombre d'enreg

Hello
I am loading a csv file into an oracle table via SQL LOADER
Each time i invoke it i get the folowing message :
SQL LOADER message : Point de validation <COMMIT> atteint - nombre d'enregis. logiques 52. (i am french version of apex)
And the table is left empty.
The translation of the above message is :
SQL LOADER Validation Point <COMMIT> reached. number of logical records 52
What doese it mean ?
Thanks in advance.

Yes
my table is empty and
and this is my control file :
load data
infile 'i:\csvs\mvh051.csv'
into table mvhist051
fields terminated by ';' optionally enclosed by '"'
(ETABLI,NUPIECE,NUMLIGNE,DATEOP,JOURNAL,COMPTE,CODEN,LIBELLE,MONTANT,SENS,DATEVALEUR,OPERATION,NPIECE,CORIG,SOLDE,MVAPUR)
hear is a sample of bide file :
5100;2052;1;01/01/2005;ARB;1120060;0;report de solde 2004;6122867,27;D;01/01/2005;98;;1
5100;2053;1;01/01/2005;ARB;1120070;0;report de solde 2004;223639,17;D;01/01/2005;98;;1
5100;2054;1;01/01/2005;ARB;1261000;0;report de solde 2004;4680204207,00;D;01/01/2005;98;;1
5100;2055;1;01/01/2005;ARB;1271100;0;report de solde 2004;81895715591,44;D;01/01/2005;98;;1
ETABLI;NUPIECE;NUMLIGNE;DATEOP;JOURNAL;COMPTE;CODEN;LIBELLE;MONTANT;SENS;DATEVALEUR;OPERATION;NPIECE;CORIG;SOLDE;MVAPUR
Please not that the last line is the heading columns names. I dont under stand why
it is copied.

Installation hangs at step 18-Load Java Database Content

Hi,
I am trying to install NW04s WAS. No matter, how many times I uninstall & reinstall(after properly clearing registry entries by running supplied cleaner.exe,stop the Xserver services if running), the installation just doesn't progress at step 18- 'Load Java Database Content'.
Here is what I did:
I read other threads and checked from the SAP Management Console if the DB is online. It is online and the DB is not full.But the log and Data states are shown as 0%.
Next, according to some threads I removed the JDK 1.4.2_15 and installed 1.4.2_12 version.No use.
I couldn't find any other threads with suggestions which could be of help to my issue.
I am using windows vista home premium.I get some errors during installation but not during step 18. so I am not sure whether to consider those errors for this issue.
<u>Following is the phase information:</u>
PHASE 2007-09-22 15:40:18
Prepare the installation program.
WARNING[E] 2007-09-22 15:43:05
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2007-09-22 15:44:47
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2007-09-22 15:45:50
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
ERROR 2007-09-22 15:50:42
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
ERROR 2007-09-22 15:51:12
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
ERROR 2007-09-22 15:51:12
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_01).
ERROR 2007-09-22 15:51:12
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
ERROR 2007-09-22 15:51:12
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPJ2E_00).
WARNING 2007-09-22 15:52:11
While copying files to 'C:\usr\sap\J2E\SCS01\exe': source file 'C:\usr\sap\J2E\SYS\exe\run/icudt26.dll' not found.
WARNING 2007-09-22 15:52:12
While copying files to 'C:\usr\sap\J2E\JC00\exe': source file 'C:\usr\sap\J2E\SYS\exe\run/icudt26.dll' not found.
ERROR 2007-09-22 15:52:31
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
WARNING 2007-09-22 15:54:12
Execution of the command "C:\usr\sap/J2E/JC00/igs/bin/igswd.exe 'C:\usr\sap\J2E\JC00\igs' '-c' '-tracelevel=1' '-mux=Karthik-PC,40000' '-listenerhttp=40080' '-portwatcher=40001' '-portwatcher=40002'" finished with return code 1. Output:
PHASE 2007-09-22 16:03:03
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2007-09-22 16:03:22
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2007-09-22 16:04:29
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2007-09-22 16:05:18
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2007-09-22 16:05:59
SAP J2EE Engine
PHASE 2007-09-22 16:06:09
JLoad Run
I have spent a lot of time to have this installed. Please somebody help.
Thanks
Karthik

Hi Raja and Anatoliy Misyura ,
Thanks a lot for taking time to reply to my issue.
1)I completely unistalled the previous version by running clearner.exe and stopping the services,removing sapdb folder etc.,
2)Then I disabled my antivirus,firewall etc.,
3)Installed jdk 1.4.2_11(after removed the previously tried version 1.4.2_12
4)Ran the SAPInst installer
But unfortunately still the installer stops at the same step!
Don't know what's going wrong.....
Raja- Can you tell me what is the windows OS version you have? Mine is home premium.
Thanks
Karthik
Can you guys let me know if you have any other suggestions

Error during step C3 Load Master Data of report /SAPAPO/OM_LC_UPGRADE_70

We are upgrading from SCM 5.0 to SCM 7.0. We have tried to run step C3. Load master data but it keeps displaying a red light with "Jobs for creating master data terminated". Messages in the job log are as follows:
Message text                                                                                Message class Message no. Message type
Job started                                                                                00           516          S
Step 001 started (program /SAPAPO/RESOURCES_LC_CREATE,
variant &0000000000011, user ID #######)                                                         00           550          S
Prepare data                                                                                00           001          S
Create Resources                                                                                00           001          S
Create Resources with setup matrix                                                                       00           001          S
Wrap Up                                                                                00           001          S
Error creating resources in liveCache                                                                     00           001          E
Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
There are no dumps in st22 or messages in the system log sm21. We have tried numeorus searches on SDN, Marketplace, and Google and have found nothing.
Any suggestions or help would be greatly appreciated.

Hello George Woods,
1. For the reported error itu2019s not good idea to search the solution in SDN.
2. Please check, that the notes recommended in SAP note 1292734 were applied
before you run C section steps.
3. I recommend you to create the SAP ticket to the component u201CSCM-APO-MD-REu201D.
Thank you and best regards, Natalia Khlopina

Steps for loading approvers, solicitors & workflows to the CUP

Hello,
I want to know if there is a way or steps to load the approvers, solicitors & workflows in the CUP of SAP GRC AC 5.3.
What I mean is that can I load first the workflows and then the approvers & solicitors and then join the approvers to the workflow, or do I have to put first the approvers & solicitors first and then the workflows & join them??
Please I need help.
Best regards...
Pablo Mortera.

Sorry, Pablo. Just one question::
What do you mean by solicitors?
Having approvers set up and creating workflows are two separate tasks and have no dependency so you don't have to worry about the order. You won't be able to create request without having both of them configured in CUP.
Regards,
Alpesh

One/Two Step STO by Document Type

Hello,
We have a requirement where we would like to use two different (UB) STO document types, one utilizing a one-step STO the other a two-step STO for the same supplying / receiving plant combination. We have different delivery types associated with the two STO document types.
The standard configuration appears to enable/disable one-step for all document types between that shipping and receiving plant combination.
I was hoping to create a new schedule line assigned to a new item category for the one STO type which has the 641 movement type removed, but when I try that the delivery is not being distributed to out decentralized WM system.
Thoughts or other approaches?
Best,
Matt

I was able to solve this as I was on the right route with schedule line category. I have created a new schedule line category which in turn is assigned to my item category, delivery, and STO document type I wish to use for the one-step STO. I that schedule line configuration I have specified both the one-step and two-step movement types as 647.

Step by step to load datSource 2lis_03_UM

Friends, I need a step by step to load data from the dataSource 2LIS_03_UM.
I need the fields that reflect the report MIGO / MIRO R3
I'm using 7.0 aversion
Thank you

Hi,
You just want use 2lis_03_UM only?
This is lo data source. so you need delete and fill the setup tables.
Delete setup tables -T code - LBWG use application as 03.
Filling by using t code - OLIZBW .
later you can do test run at RSA3.
once you see the data there then replicate your data source into bw.
create info cube and transformations,info pack and dtp.
Thanks

Steps to convert access point from LightWeight mode to Autonomous mode

I need steps to convert the following access point from Lightweight mode to Autonomous mode
AIR-AP1242AG-E-K9
Regards,
Majid

Hi Majid,
The method is just hidden a little further down the doc that Scott linked (+5 points Scott :)
Using a TFTP Server to Return to a Previous Release
Note This section does not apply to Cisco C3201WMIC and Cisco C3201LAP.
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 On the PC where the TFTP server is located, perform these steps:
a. Disable any software firewall products, such as Windows firewall, ZoneAlarm firewall, McAffee firewall, or others.
b. Ensure all Windows files are visible. From Windows Explorer, click Tools > Folder Options > View > Show hidden files and folders.
Step 4 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, c1240-k9w7-tar.default for a 1240 series access point, and c1250-k9w7-tar.default for a 1250 series access point.
Step 5 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 6 Disconnect power from the access point.
Step 7 Press and hold MODE while you reconnect power to the access point.
Step 8 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 9 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 10 After the access point reboots, reconfigure it using the GUI or the CLI.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Hope this helps!
Rob

Two-step confirmation of Transfer order in WM

Hi
We are confirguring 2 step confirmation.
We have activated 2step conf, for the warehouse & marked corfirmation mandatory for the storage types,
However we are not able to perform confirmation for Pick & Transfer step.
Please let us know on how to configure two step confirmation.
Thanks,

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

2 steps STO - Load Transfer Points

Similar Messages

Maybe you are looking for