2 Switches in One? [300 series] Want to have two uplinks/trunks.

I have a 300 series switch with VLAN1 untagged, VLAN 15,5,100 tagged. I want say ports 1-12 to use one uplink/trunk and 13-24 to use another uplink. All ports should have the same default VLAN1 and be tagged for 5,15,100. I'm trying to ease the load on two wireless uplinks(one is a Cisco 1242AG and the other is a UBNT PowerBridge.) I don't want to add another switch. Is this possible?
Model:
SF 300-24P

Hello Derek,
Thank you for using the community forum.
It looks like you would be creating a loop. This would cause Spanning-Tree to kick in and prevent the loop by shutting down one of the Trunk ports. You can load balance at layer 2 but it requires balancing by vlan. So you would need to send 1,5 across one trunk and 15, 100 across the other. Would this be a posibility?
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

Similar Messages

I want to have two folders of Finder so that I can easily drag and drop files from one folder to another

I have been trying to reorganize my files. When in Manila I created a folder called Manila 2015 in Documents. I have the Mother folder Files 2015 with several subfolders like Finances, Personal, Tax etc. I want to have two finder folders simultaneously so that I can drag and drop files from the Manila 2015 folder to the various subfolders in the mother folder Files 2015. I am not able to open two windows of Finder on the desktop.

I have since found out that a new finder window can be opened witht the short cut Command+N.
Thanks anyway.

How do I set up two libraries on one pc so that we have two separate libraries for each iPhone?

How do I set up two libraries on one pc so that we have two separate libraries for each iPhone?

Launch it with the Shift key held down, or create a second Windows user account.
(60390)

I want to have two different operations on two analog output terminals of DAQ. When I work

with AO0, it works. But after I add in another channel, AO1, there is an error saying that 'specified group is in use'. Actually, I assigned different group number for AO0 and AO1 when configuing the device using AO Config.vi. How to deal with this error?I want to have two different operations on two analog output terminals of DAQ. When I work with AO0, it works. But after I add in another channel, AO1, there is an error saying that 'specified group is in use'. Actually, I assigned different group number for AO0 and AO1 when configuing the device using AO Config.vi. How to deal with this error?

with AO0, it works. But after I add in another channel, AO1, there is an error saying that 'specified group is in use'. Actually, I assigned different group number for AO0 and AO1 when configuing the device using AO Config.vi. How to deal with this error?Hey Steve,
Doug is correct. Both analog outputs have a shared clock. If you want to write to both outputs simultaneously, you will need to include both of them in the same operation (group).
You can write a 2-D array to the AO Write VI in which you can include data for both channels. In the 2-D array, column 1 will be for the first channel in the channel list and column 2 will be for the second channel.
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

I had to purchase a new MacBook when my old one was stolen. We have two other MacBooks that use the ITunes library. Is there any way to get the library transferred to my new computer.

I had to purchase a new MacBook when my old one was stolen. We have two other MacBooks in the family that use the ITunes library. How do I get the full ITunes library on the new computer when I don't have access to the old computer?

If your backup copy of the old computer was not stolen, then use it to put everything back.

Want to have two sites on .Mac made with iWeb

I have two folders on my iDisk in the Sites folder with different names. How do I get two different URL's for each website.
So with two folders each titled different can I use the folder names like
http://web.mac.com/foldername/welcome.html
http://web.mac.com/foldername-1/welcome.html
Just got iWeb the other day, I've been using DreamWeaver so I'm new to this simplicity. I'm used to working on Linux webserver too. My old URLs used to be www.name.com/index.html and so forth now this .mac subdomain is tricking me out
Any help is appreciated.
Internet Wiz™

I think everyone will want to know how to do this. I am intested in working on more than two sites and publishing them not on a .Mac account.
What I have begun to do as a work-around is to label the sites by the domain name (xyz.com and abc.com) and then publish them to a separate iweb folder.
Of course the gotcha is that when you publish to an external folder you need to set the url - so each time you publish to a folder you need to set the url correctly for the domain you are working on.
Once published to the iweb folder you then upload the indvidiual files for the particular domain and you are set.
Too bad you can't work on mulitple sites, just highlight the site you want to publish to a folder and then have only that site published.
This is how I expected it to work.
hope this helps,
Dan

I want to have two home pages when I open Firefox, where is the setting for this?

In my computer class at school the instructor told us that you can set your browser to have two tabs open when you start the browser... I would like to be able to have my Facebook and my favorite blog to come up every time I open FireFox, but I cant find the setting myself... please help!!

Hi b_dan_gidd,
All you have to do is open both pages in different tabs and then choose ''Use Current Pages'' while you are setting your home page. It's actually really easy. Just take a look at the Knowledge base article [[How to set the home page]].
Hopefully this helps!

Want to have two iPhone's syncing to one iTunes account - possible?

I flip between the US and UK - I have a UK iPhone but am about to buy a US phone - I want them both to sync to one account so they replicate each other - can this be done

I can also state that yes you can do this as I have 2 iPhone's and an iPod touch synced to the same account. I've split the apps between the 3 to better manage my content i.e. (movies on one phone, games on the iPod, and music and podcasts only on my main phone.)

I want to have 2 active windows open on the screen so I can click either one as needed, e.g. I want to have two e-mails open simultaneously on the screen

The first e-mail will contain a verification code which must be entered into the second e-mail while the first e-mail is still open.

If those emails are from different accounts then open a second Private Browsing mode window and resize both windows to make them fit next to each other if you really need to see them at the same time (it shouldn't be a problem to paste content from one tab to another tab, just hover on the tab or use "command + ~" to switch windows).
That will allow you to login to a separate windows account.

I want to have two profiles share the same extensions and themes.

I have themes in Profile 1 that I want Profile 2 to have and I have themes in Profile 2 that I want Profile 1 to have. Also, I want both Profile 1 and Profile 2 to have each others extensions, however I don't want them to be global for all profiles.
TIA
Brian M Kochera ABCDT
Sit Stay And Beyond LLC
Dog Manners Not Mayhem

There was a method of doing this listed in '''news.mozilla.org.firefox''' '''re:Globalizing extension''s"' .by Sailfish ) a few versions back. But the current version doesn't have the same menu options as older one's did.
Basically the old way to do it was to it is 1st backup the profiles in question . Then navigating in '''Profile 1''':
# Options>Help>Troubleshooting Information"
# Click "Open Containing Folder" Button in Applications Basic Section
# Close Browser Leaving Folder Open
# Repeat these steps for '''Profile 2.'''
# Navigate to each profile folder's extension/theme folder and copy the folder for the desired extensions missing from the other to it's extension/theme folder. Note: You may need to navigate down to the extensions folder's chrome/content/ folder to determine which extension it is.
# After all desired extensions/themes are synchronized to each profile, navigate up to both profile's root folder and rename the "extensions.ini" and "extensions.sqlite" files to "extensions.ini.OLD" and "extensions.sqlite.OLD" respectively.
# Restart the browser with each profile to insure that they now both have the desired synchronized extensions/themes.
The problem being now, that when you navigate to "Troubleshooting Information" you get an online web page and not a means to open a profile.

My phone has a identity crisis wanting to have two numbers

Hi, I switched from Orange to EE a few weeks ago andy phrased my phone. it took a little while for my phone number to come across to my new phone ( both iPhones) now it seems for some reason my phone has, for network calls kept my old number but when using wifi for texts, face time etc reverted back to its factory/EE allocated number. Causing much comdey. Interestingly I turned on my old phone and via wifi, as it has no network now. It seems to have taken my old number back as its own. How do I get it fully across to my new phone on all forms, styles of communication. If you can get it to work on carrier legion and smoke signals too you might get a gold star,
Many thanks.
Andy

Hi ,
Welcome to the community.
To get this sorted, use the below steps:
Go to Settings > Phone > My Number.
Replace the temporary number you find there with your own number - use +44 instead of the first 0.
Then tap Save.
To Reset the iMessage settings please do the below:
Your iMessage settings won't reset themselves during porting - the temporary number will still be in your new iPhone.
To input your old number into your new iPhone:
Go to Settings
Tap on Messages
Tap iMessage ON
Scroll down to Send & Receive number
Replace the temporary number with your old number
Then tap Save.
This should stop this for you.
Thanks.

I want to have two windows open at the same time

I have multiple tabs but I want to be able to see two or three windows at the same time. How do I do this

You can click and drag on a tab to "tear" it out into a new window. Or you can open a new window by pressing Control+N, or by hovering over "New Tab" in the Firefox menu and then choosing "New Window" from the sub-menu that appears.

In one FI posting can we have two real objects?

Hi All,
When I am posting FI document with two real Objects (WBS & Cost Center) still system is accepting and created document.
As per My knowledge in FI Document only one real object to be accept but my case it taking two real cost object, why?
Is there any logic & activity and change any setting for this?
Thank you
Anil

Hi,
you can enter CO objects of more than one type in the FI document, but there is a "hierarchy" among the different object types that decides, which object gets the "real" posting. All other objects will only get a statistical posting, even if they are configured to allow real postings ( are "real objects" in your terms) .
Examples:
You enter a cost center and an internal order in the document: --> order gets real posting, center statistical.
You enter a profitablitiy segment and an internal order in the FI document --> segement gets real posting, order statistical one.
Regards
Nikolas

One question of the method have two chance to return the result.

Hello All,
I get a problem at present.The code is following.
package com.ricky.test;
public class Test {
     public static void main(String args[]) {
          System.out.println(kkk());
     public static int kkk() {
          int k = 0;
          try {
               k += 2;
               return k;
          } catch (Exception e) {
               k++;
               return k;
          } finally {
               k += 5;
               System.out.println("get Here");
               return k;
}why does the result is 7.Isn't it return at the "try" part? and my eclipse alarm that "finally block doesn't complete normally";
thank you for your help!(I hope someone know my mean,because i'm not good at english. )

if I change the method to :
public static int kkk() {
          int k = 0;
          try {
               k += 2;
               return k;
          } catch (Exception e) {
               k++;
               return k;
          } finally {
               k += 5;
     }the result is 2(just execute k += 2 and then return the result.)
but if i change the method to
public static StringBuffer kkk1() {
          StringBuffer result = new StringBuffer("1");
          try {
               result = result.append("2");
               return result;
          } catch (Exception e) {
               result = result.append("3");
               return result;
          } finally {
               result = result.append("4");
               // return result;
     }the result is 124(the finally block effect the result value)Why?
Maybe is the result is the memory address.is that right?

Can I have two or more JVMs in one mashin and switch between them?

Hi all,
I want to have two JVMs in one mashin and switch between them via a httpListener. If I can, could you please guide me to do it?
Thanks in advance,
Orod Semsarzadeh

may be my question is not fully clear. I mean, I want to have an bottun in my JSP when I click on it, 1 thread will be created and work in another JVM.

2 Switches in One? [300 series] Want to have two uplinks/trunks.

Similar Messages

Maybe you are looking for