2 Time Capsules ,2 macs. Can I synch one Mac to each TC on the same network please?

Hi All,
I have a network with a 2 Macs synching to one Time Capsule. My Daughter just got a new Mac and I have got a new TC just for her Mac. What is the best way to configure please? Currently we have an Airport Extreme, with the original Time Capsule extending the network. I want to assume that I can just start off the new (second TC)TC and link it solely to my daughter's new Mac, but from what I have read in other support communities perhaps it is not that easy?
So two questions.
1. Will it work
2, If so, which config please: AE+TC+TC
Thanks for all the help in advance. Andrew.

If you want your daughter's TC to connect using wireless, configure it to "Extend a wireless network".
Her TC will extend the AirPort Extreme network as well, so locate her TC close to the AirPort Extreme for the configuration. Once you have the settings saved, then move it to the desired location.
Obviously, it is important that her TC be located where it can receive a good signal from the AirPort Extreme.
Then, open Time Machine on her Mac and "point" her Mac at "her" TC, not yours.

Similar Messages

HT1495 I have just purchased a second ipod and have 2 computers can i use one ipod on each computer with the same account. I have a different playlist on my second computer. Thanks,

I have just purchased a second ipod and have two computers w7 and xp, can i use one on each computer with the same account. I have a different playlist on my second computer. Thanks.

Sorry to ask, how do I do it please. I have my first ipod with the same account on both computers that have different libraries one of which I am building now. Do I have to de-authorise my original ipod on the computer that I want to use my new ipod on with the new library and then register my new ipod. I would rather do this than have 2 libraries on one itunes, but keep the same account details.

HT4356 How can I tell if my AirPrint printer is on the same network as my router

How can I tell if my printer is on the same network as my wireless router

iMac Obsessed wrote:
I've had my MacBook Pro Retina since the 17th and am only now realising that my firewall was not on. I've already connected to a network via ethernet at my job so that I can have access to the internet. How can I tell if my personal info is safe?
As long as you are behind a router, you don't need to have your firewall turned on at all, in fact it probably slows your computer and/or internet connection down a bit. The only time you need it is to either protect yourself against intrusion from others on your local network or if you hook your computer directly to a cable / DSL modem. See Thomas Reed's Do I Need a Firewall?

HT4356 Do I need an App to print from my iPad to my new HP AirPrint capable printer? My iPad says it can't find a printer and we are on the same network.

I have a new HP LaserJet M1217nfw MFP that is supposed to have air print. My iPad isn't reading it. Is there something special I need to do? Both are on the same network and my laptop is working fine with it. Any suggestions?

1. Make sure it's setup for network printing
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
2. You can try using this App
http://i1224.photobucket.com/albums/ee374/Diavonex/6df9f88d.jpg
3. Reboot router, printer and iPad if necessary

Can I use two airport extreme base station on the same network

Can I use two airport extreme base station on the same network

Here is my network setup:
D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
attached via ethernet to
5th generation AirPort Extreme Base Station - Main (Bought last week)
attached via ethernet to
4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
The main AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
TCP/IP Tab -> Configure IPv4: Using DHCP
DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
The remote AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1 (Everything else under this tab is blank)
Hope this helps with info needed.

How can I install one app on multiple iPads at the same time?

We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

You can do a backup of you iPad then restore the backup to many devices.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
Mobile Device Management Solutions for iOS
http://www.apple.com/iphone/business/integration/mdm/
http://www.apple.com/ipad/business/resources/
"iOS mobile device management (MDM)
With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
http://jamfsoftware.com/products/casper-suite/

Why can I not connect to my MAC from a PC on the same network

I have a correctly formatted external HD mounted on my MacBook Air (Mac OSX version 10. 7. 5. Lion) and can access it without problems from my MacBook Pro, but when I am trying to access it from a PC (both Windows XP and Windows 7) the PC can "see" my MacBook Air on the network, but cannot connect to it - the PC connect window continues to ask for the password, even I am sure I am writing the correct password

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can more than one child be visible/open at the same time in Accordion navigator container?

I have a situation where I need a layout like Accordion
container but with more than one child panel visible at the same
time. Is it possible with Accordion container? If not, any
suggestions to implement this layout?

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report? Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

Can two servers running windows sbs 2008 be on the same network

I have two HP proliant dl360 servers. We are trying to set up one as a file server. Can we install a copy of Windows sbs 2008 on both machines (we have the license) in the same network

Hi
Every one is quite right you can not install SBS2008 on both machines. Only 1 server on a network can have SBS on it.
However all you need for the second file only server is Server 2008 (it doesn't need to be SBS)
Things to investigate
1. If you have a license for SBS2008 you may run Server 2008 on other servers with no additional client licenses (if you install server 2008R2 or higher on a second or more servers, you will need both SBS2008 and Server 2008R2 client licenses for each user)
So client licenses are sorted
2. If you already have 2 copies of SBS2008 for install, you may find you can downgrade SBS2008 to server 2008 (you will need to double check this, but generally means you can install Server 2008 without having to spend the extra money as you already have
paid for the SBS2008)
3. You may find a old retail copy of Server 2008 on ebay you can buy
Generally the solution to this is, SBS2008 goes on the most powerful server, and is set up as the domain controller, exchange etc.... then on the second server you just install Server 2008 and join it to the domain to be controlled by SBS2008 server, you
don't need to worry about extra CALS, as long as you stay Server 2008 or under
You then set up this second server independently with backups, shadowcopies and shared folders
Group policies for both are configured on the SBS box so you can set up predefined mapping etc
The difficulty you will have is obtaining the old software
If you uses SBS2011 you can use Server 2008R2 and before with no additional CALS
CALS relate to the core OS used, in SBS2008 it is 2008 in SBS 2011 it is 2008R2
Hope this helps
Tris

I have two ipad2's how can i load purchased apps to each ipad2 from the same itunes library?

I have two iPad2's and I wish to load purchased apps from our iTunes library to our newest iPad2. Can anyone direct me and or provide steps in completing this process?
Thank you.
texasboytn

delete/uninstall the apps that your relative downloaded on you iPad. to do that tap and hold on and icon til it shakes, once its shaking downloaded apps will havee (X) mark on them on a red bubble, tap on it to delete

Own OSX 10.6.8 Snow Leopard. MSOffice 2004 was taken out because of computer repair and now can't find disc to reinstall. But WANT the Office 2004, not Office 2011. Where can I find one and are all Officew 2004 the same

I own a OSX 10.6.8. IMAC with Snow Leopard. my MSWORD Office 2004 was taken off when computer was repaired and now can't find the disc to reinstall. Do not want the Office2011.. Where do I find the Office 2004 and are all Office 2004 choices the smae.

Hi Martha - Amazon offers office 2004 on their website.
http://www.amazon.com/Microsoft-Office-2004-Standard-VERSION/dp/B0001WN0M2
That will be your best bet if you want to have office 2004 on your computer. Also, there are some different versions want to come to office. The link above gives you the standard version, but there's also the professional version. Now it sounds like that you do not want to upgrade to the latest office because you're most likely comfortable with how 2004 works. So in that case I would not spend the extra money and pay for the professional version unless you really need it. I see on the website there that if you buy a used copy it will only cost you around $10.
Hope this helps!

Can I authorize a computer without it being on the same network?

I bought a new computer. I want to transfer my itunes account to it. Do I really need to spend the money to make a direct connection between the two computers to do it?

Hi DP07:
Welcome to Apple Discussions!
That is one way to transfer the music from your old computer to your new computer. You can also use your iPod if you have one: http://docs.info.apple.com/article.html?artnum=300173

Can more than one ipod touch be used on the same computer

Have a new iPod touch-4th gen. Have iTunes already on computer, for a 3rd gen. Updated to lastest version of iTunes. New iPod is not showing up at all anywhere.

More than one ipod on same computer is possible: http://support.apple.com/kb/HT1495
See if this helps in getting the other recognized in itunes:http://www.apple.com/support/ipodtouch/assistant/itunes/

Can more than one SAP ERP system connect to the same PI system?

HI Experts
Well i am new to SAP Process Integration 7.1 and i have managed to point PI system to SAP DEV ERP , but i also want to add these other 2 systems SAP QAS ERP and SAP PRD ERP Using RFC Adapter. So is it possible to integrate SAP QAS and SAP PRD ERP into the same PI system that is pointing to SAP DEV ERP. If possible what are the configuration steps that i should follow?.
This project implementation is based on SAP MDM 7.1/ SAP PI 7.1/ ECC EHP6.

Hi Farai,
Technically this is possible. But don't forget that all systems are then using the same ESR and ID. So changes on PI are also influencing ERP QAS and PRD. I don't recommend this. At least you should have 2 stages for PI: Development and QAS/PRD.
You just need to maintain 2 connections in ERP: ESR connection and RFC connection. For using the interfaces in PI for all 3 stages you need to create 3 different configurations in Integration Builder of PI.
Best Regards
Harald

Can more than one Ipod Nano be used on the same computer

I want to give an Ipod Nano as a gift. The prospective recipient tells me that her daughter already uses the computer for her Ipod. Is it possible to use the same software without synchronizing both Ipods with the same songs and such?

Yes. Point her here:
How to use multiple iPods with one computer

2 Time Capsules ,2 macs. Can I synch one Mac to each TC on the same network please?

Similar Messages

Maybe you are looking for