2 Unknown eth Devices where connected to bthub4

I was checking my internet, went into the bthub4, and found 2 unknown devices connected via ethernet, i went through all my stuff and the 2 mac addresses that where linked dont match any of my stuff, so, how is it possible?, ubless that security breach is back and present in the new bthub4, from what i can gather, your connection can be hijacked through upnp, or could of beeen hijacked, supposed of been fixed bthub3, theres no other explaination, i dont have any devices with the 2 culprit mac addresses, so someone as been connected to the hub4, and the hub4 as marked them as ethernet devices, can someone explain, i dont think im being paranoid here.

Do you have any Powerline adapters connected to the home hub?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

In the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.

in the finder, in devices where the pen name appears. I dragged to the desktop and now whenever I put my pen can not find it. but I know it is connected because when shooting says he was ejected.

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

I have a friend who I was helping out with his iPhone. He has since lost it. I believe I backed it up to my machine but have no idea where to find it. Is it possible to find it and read the back-up file without the original device being connected?

I have a friend who I was helping out with his iPhone. He has since lost it. I believe I backed it up to my machine but have no idea where to find it. Is it possible to find it and read the back-up file without the original device being connected?

If he gets another device - you should be able to restore it from your computer to the point where you backed it up
Otherwise that file cannot be read

HT5569 My i-touch keeps searching for a wi-fi network where it use to connect and all my other apple devices still connect. I have reset, reload, off and on and off and on....what else could I try?

My ipod touch just keeps searching for a wi-fi connection in my house where it use to connect automatically. My other apple devices still are connecting so not the wi-fi. I have reset to original settings, turned off-on-off-on... nothing seems to work. Does anyone have any ideas?
Thanks!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. (I think you did this)
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi, my iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there eny way I can get rid of this?

Hi,
My iPad and the camera connection kit is completely useless to me, ever since the update where Apple restricted the device from connecting to certain external devices. I've tried everything, but is there any way I can get rid of this annoying problem? The bottom line is that I'll stay away from apple, because they basically make it so the devices control you, and you don't control the devices. I've even jail broken to try and fix this. I need my USB drives to work as they have many folders. Formatting doesn't work, so it is definetly down to the software and it's restrictions.
Please help.

The camera connection kit is to be used to connect a camera or an SD card and transfer photos/video. You can't fault them for something that happened to work and doesn't any longer. There are drives like the seagate available if you need access to extra storage
http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/goflex -satellite/

How can I tell the device is connected to itunes 12?

how can I tell the device is connected to itunes 12? I have Windows 8. I hear that the device is connected, but don't see the device to manage. Only thing that happens is on the phone it says Trust the computer.. I say Trust and nothing happens.

in ituens at the top where you see the small icons for Music, Movies, TV etc when your device is connected you will see a small icon representing your phone or ipad etc popup click that and it will show you the usual interface for backup and syncing.
if that doesnt happen, like it didint for me initially, you should close itunes fully via task manager if you know how to do this and start it again with the device unplugged then plug it in after itunes has finished loading.
Worst case scenario you nee to resatrt

ITunes 10.2 Upgrade fix temporary. Fix to iTunes 10.2.2 by uninstall Apple Mobile Device Support and install AMDS from 10.0. Worked only to fail in 5 days. iTunes back to very slow to open and will not see device (iPhone) connected. Sorry

I was one this site for 20+ Days and found a fix for 10.2.1 when it failed. I Uninstalled all, following other attempts that failed, then installed latest Version from Apple iTunes 10.2.12. I then uninstalled Apple Mobile Device Support (AMDS) and installed AMDS from the older 10.0 version of iTunes. Success it worked. Today, I am now back to old problem, iTnes takes very long time to open and fails to see my device when connected (iPhone). I really only have iTunes for my iPhone no extensive library a few hundred CD's in music location and no podcasts. I have less than 6 moveis and want to update them now. I am willing to lose all in iTunes library if need be just to get computer to see G3 iPhone with iOS 4.2 and let me synch once again. I like security of backup too. It older iTunes may now not support, that too is OK. I still want to get the 3GS (no 4G desires, yet) and do not care if any of it is the latest from Apple as long as it works.

Hi Erik,
Your basic suggestion actually worked for me. But this is what I did for others who are having issues removing/installing etc.
1. Download the latest iTunes 8.2. You should end up with a file iTunesSetup.
2. If you dont already have WinRAR, download free copy from http://www.rarlab.com/ and install.
3. Right click on iTunesSetup and choose "Extract" to somewhere you know. eg C:\itunetemp
4. Open up folder where you extracted iTunesSetup and double-click applemobiledevicesupport.msi
5. It should ask you if you want to repair or remove... choose remove.
6. REBOOT your PC.
7. Go back to where you extracted iTunesSetup and double-click applemobiledevicesupport.msi and go through the install.
8. Plug in your iPhone.
If all is well iTunes should automatically start and start syncing your iPhone.
Goodluck all!
Cheers.

ITunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75 Any thoughts?

iTunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75 Any thoughts?

For reasons unknown I found copies of many of these tracks as 256 kbps .m4a files in my Trash. As such I was able to remove the existing 128 kbps .m4p (Purchased) files (but not deleting them from iCloud), add the 256 kbps .m4a files to iTunes and then Add to iCloud whereupon, the original 128 kbps listings with the download from iCloud link switched to 256 kbps (Purchased) files. For a few of the files I accidentally deleted the 128 kbps (Purchased) from iCloud and when I added the .m4a to iCloud they appeared as 256 kbps (Matched) songs instead. Not sure why the difference, but it worked for several of these problematic files. But I still don't understand why/where these .m4a versions came from as most of these purchased predated iTunes Plus (e.g., my original purchases were 128 kbps). My new list of recalcitrant files is:
Anna Nalick: Breathe (iTunes SOTW)
Coldplay: Parachutes (tracks 4 + 5)
Dave Matthews Band: Stand Up (tracks 3-6, 11, 12)
Feis: One Evening (iTunes SOTW)
Future Leaders…: Let Me Out (iTunes SOTW)
Hinder: Get Stoned (iTunes SOTW)
Living Things: Ahead of the Lions (iTunes SOTW)
Low Millions: Eleanor (iTunes SOTW)
Spymob: Sitting Around Keeping Score (iTunes SOTW)
As you can see, most of these are iTunes single of the week (SOTW) offerings, so I'm not too bothered about them.

"Unknown USB Device"

I got my 2GB nano last Monday. I could successfuly install it on my laptop and upload some songs to it. That done, I wrapped it again and gave it to my wife, so she and the kids could "surprise" me for my Birthday. Yesterday I got it,listened to the "sample songs that came with it", and today I tried to upload some more songs, but to no avail. Everytime I plug it in, all I get is an error message from windows, stating "Unknown USB Device". I tried everything from the iPod support site and from Windows help, but the nano simply won't be recognized. Oh, I tried to hook it up to my desktop at home as well, but nada as well. Same message.
Is my cable fried? Is my iPod connector fried? Can someone pinpoint the problem?
To worsen things even further, I live in Brazil, where the first nanos won't be around until Christmas, and support is but a dream...
Help!
Ruy

These steps should help you with the 'Unknown USB Device' issue, Ruy:
First, make hidden folders visible. Open My Computer and choose Tools/Folder Options/View tab. Click on 'Show hidden files and folders' and click OK.
In the Add New Hardware Wizard, have it search in C:\windows\inf for usbstor.inf. This file is required for windows to properly configure the driver. If Windows finds the driver there, you're done.
If Windows does not find the proper driver there, copy usbstor.sys from C:\windows\servicepack\i386 to C:\windows\system32\drivers.
If you can't find the usbstor.inf file on your system, you can get it here: usbstor.inf
After copying the usbstor.inf driver file to C:\Windows\inf, right-click on My Computer and choose Manage.'
Click on the button labeled 'Device Manager.'
Click to open the list under 'Universal Serial Bus Controllers.'
Right click on any mass storage devices with the exclamation icon next to them and select 'Update Driver.'
Check the option 'Install from a list or a specific location' and then click to continue.
Check next to 'Include this location in the search' and enter 'C:\windows\inf'.
Click on 'Next' and follow the steps to complete the driver installation wizard.

TACACS+ packet from unknown Network Device or AAA Client

Hi all,
I can't perform login using the credential set at ACS server, From the log it shown:
"Failure Reason: 13017 Received TACACS+ packet from unknown Network Device or AAA Client"
I know there's some changes on TACACS+ part for new catalyst IOS, so i refer the guide and this is my config snipet:
aaa group server tacacs+ TAC_PLUS
server name AUTH
tacacs server AUTH
address ipv4 10.10.21.251
key xxxxxx
aaa authentication login TAC_PLUS group tacacs+ local line
aaa authorization exec TAC_PLUS group tacacs+ none
aaa authorization commands 15 default if-authenticated
aaa accounting update periodic 1
aaa accounting exec TAC_PLUS start-stop group tacacs+
aaa accounting network TAC_PLUS start-stop group tacacs+
aaa accounting connection TAC_PLUS start-stop group tacacs+
My platform is
- C6500 running on IOS 12.2 (33) SXJ1
- ACS 5.2.0.26
Need guidance on this, thanks
Noel

Hello,
Is the appropriate IOS IP address defined on the Network Devices and AAA Clients for the ACS? If yes, which IP address is reported on the ACS Failure that includes the error "TACACS+ packet from unknown Network Device or AAA Client"? Is the ACS reporting the IP address as unknown when it is already defined appropriately?
Regards.

Device to connect photo ipod to car stereo?

I am looking for a a good device to connect my ipod to my car stereo. I was using a cheap tape connector with wire on my old car but the new one only has a cd player.
I bought a no-name fm transmitter (made in china?) with charging capability on ebay and no matter what station it was set on there was static. Can anyone recommend one you have had success with--I would prefer that it have the capability to charge the ipod too.
Thanks!
Nathan

I have been using the Alpine head unit since February and it has been fantastic up until last Saturday - now it won't "see" the ipod at all. I went back to the car stereo shop where I got it and the guy there said someone else had come in a few days before with exactly the same problem - when you connect the iPod to the head unit it just keeps saying "searching". They connected a different iPod and it worked perfectly so surmised it was an iPod problem not an Alpine problem.
I've tried restoring my iPod but it won't restore (error 1428) but I suspect this has something to do with the new iTunes 7 / gapless playback software change since I only started having problems since then.
Don't know what I am going to do now. The only reason that I bought the Alpine was to play the iPod in the car and now I can't. I'm not game to get another iPod either incase Apple changes their freakin' software again and renders it incompatible. So I'm out of pocket for a head unit and a 30gb iPod.

How to control which Airport device to connect?

Hello,
I am using Airport Extreme as my wifi router while I have another Airport Express configured as "Extend Network" to Airport Extreme at home. With the new Airport Utility, it's so great that I can see the connectivity of Airport Extreme, the Internet and the Airport Express. Also putting the mouse over the device I can see where my iPad/iPhone/iMac connected to using wifi.
I start to notice that my apple devices are all connected to my Airport Extreme (using wifi) and none is connected to the Airport Express even I stand next to the Express. What's the mechanism for the device to connect to, and is there any method to enforce the connection choice?
Regards,
Earthy

Computers will usually connect to the AirPort with the strongest signal automatically. iOS devices like an iPhone and iPad use a different type of operating system.
If you want the iPhone or iPad to connect to the AirPort Express, power off the device, move it close to the AirPort Express, and then power it back up again to see if it will connect to the Express.
There are no settings on a computer or iOS device that will tell it specifically "where" to connect.

Open iTunes when this device is connected

"Open iTunes when this device is connected" is not on the Summary Tab as stated by the Help screen. So where is it?

Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes. It seems that sometime in the past, you did not do that.
I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help.

I know the password is correct, as other devices and this site have accepted the password. I would like help in uninstalling a few of the devices where the program is no longer needed.

I would like to use Adobe Digital Editions on a new Nook Tablet. I believe I have gone over the limit of devices and this may be why my password is being rejected on the new device. I would like to uninstall the program from devices where it is no longer needed.
Obviously my password is correct, as I am logged on here.

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

Ipod disconnects when too many usb devices are connected?

i have a gigabyte 7VTXE motherboard, the right via drivers and XP sp3
usb devices where it works:
keyboard, mouse, ipod
if i connect a hauppauge USB tv box or my speedtouch ADSL modem, it disconnects sometime soon after
has anyone else heard of this? annoying isn't the word....

You may be exceeding the total power available on the USB bus. If that is the case, one solution may be to get a self-powered USB hub. Connect the iPod and other devices that are frequently connected and disconnected on-the-fly to the hub. This will also reduce wear-and-tear on the more valuable USB ports on the computer. You can always get another $20 USB hub. Make sure it is the type that has its own power supply.

2 Unknown eth Devices where connected to bthub4

Similar Messages

Maybe you are looking for