2 VSANs and FC Links To Storage

I have 2 MDS 9148s and would like to create 2 VSANs, no problem.
All the storage is located on one EMC (2 FC links from the controllers to the MDS).
The issue I have is can I have a port a member of 2 VSANs, I would think not. The reason is, the current FC links to the MDS from the EMC is in one zone. So how do I allocate another storage pool to the other VSAN if it's already allocated to another? Do I have to run more Fibre Cables to the controllers?
Thanks

The layout is above..... I was thinking of 2 VSANs (10 and 15) that would be mapped to different storage pools in the EMC VNX. My confusion (new to MDS from Brocades) is the MDS configuration.mIn the typical SAN layout above with VSANs we have redundant paths to the storage controllers. So the above pic has one VSAN (10 let's say) and the MDS ports are assigned to this VSAN. Would I not have to run another set of Fibre Cables from the Fabric Interconnects to the MDS and from the MDS to the EMX STorage array to assign these ports to another VSAN (15). I think I am missing something.....
Or can I use FC Port Channels on these MDS ports to share VSAN 10 and 15????
Thanks

Similar Messages

Can't find the storage and backup link to start an icloud backup

Why is it that when you create an icloud account the Storage and Backup link isn't always there. I need to create an icloud account and then create an icloud backup right away so that I can setup multiple ipads using the icloud backup. How do I force an icloud backup?
Thanks

You can check your Junk/Spam folders, sometimes the e-mail gets sent there. Also, double check that the primary e-mail address in your Apple ID account is hers. If none of this works, I suggest to wait it out, sometimes it can take up to 24 hours!

Im trying to buy i movie but when ever i try too it says my purchase cannot be completed my credit card is good and i have enough storage so i dont know what else to do

I tryed to download i movie but whenever i try to it says my purchase cannot be completed my credit card is correct ive double checked and i jave enough storage for it so can someone please help me

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Queries related to DMS and Archive link

Hi Experts,
1. Is it possible to link documents in MIGO or FB03 through Archive link with documents already stored via OAWD or CV01N.
2. Can we use any single transaction code for reporting purpose where we can find all the documents stored via DMS and Archive link.
Kind Regards,
Vikas

Hi,
Christoph already answered that question in regard to document info records.
Regarding documents from OAWD, your question is a bit surprising. The main idea of OAWD is to trigger a workflow for linking an external document to a SAP object (document in FB03 or whatever). This is done via ArchiveLink, so all documents linked via OAWD will appear in transactions like MIGO or FB03. Once more, please refer to the documentation:
[Storage Scenarios with Integration of SAP Business Workflow|http://help.sap.com/saphelp_nw73/helpdata/en/4c/f3ee755e21458ae10000000a42189b/frameset.htm]
regards,
Juan

E Recruitment how to create Carrier and Job link

Hi
My client asking for carrier and job option in ESS, presently we are implementing to E Recruitment only
We donu2019t have EP Consultant,
Please any one help me how to create Carrier and Job link (we are using BSP and Webdynp)
Regards
eshwar

HI,
Go to OX02 and create a company code by copying the standard company code 0001 / 1000
Then go to OX10 and create a plant by copying the standard plant 0001 / 1000
OX09 - maintain storage loaction for the created plant
OX08 - create purchase org copying from standrard 0001 / 1000
Go to OX18 and assign your plant to company code
OX17 assign purchase org to plant
In order to get the tcode go to SPRO and in the top menu click on additional informations - additional information - display key - IMG activity.
After you select this then in the SPRO you have a column additional information comes up. each and every activity in SPRO will have and additional informatiom, in the additional information the last 4 characters is tcode.
Eg : SIMG_CFMENUSAPCOX02 this is the additional information for CC. the last 4 characters OX02 is the tcode
Thanks
Kiran

L3 Link for Storage Replication

Hi,
Has anyone experienced on provisioning L3 MPLS link for Storage Replication. I have two DC at different location and EMC Storage.
we will have 2 MPLS L3 Link between two DCs to replicate the data. We have 4 RPA at each side and 2 MPLS Link. but dont have idea how to connect all these things. I have Nexus 7k in new DC and 6509 in old DC.
If anyone has any idea how to provisioned this link, it would great help to me.

Hi Micky,
Such table doesn´t exist in standard SAP! You should try to accomplish this in a view!

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

With my iPhone 5s, can I record long voice memo to the cloud and not worry about storage on phone?

With my iPhone 5s, can I record a long voice memo to the cloud and not worry about storage space on phone?

You can't add music to the cloud, whether it will show there for streaming and redownloading depends upon what country that you are in. If you are in a country where music is available in the cloud then you don't have to download the music from the store, if you turn Settings > iTunes & App Store > Music (under the 'show all' heading) 'on' then you should be able to stream purchased music in the Music app without downloading it - your phone will need to be online in order to stream, and if using 3G/4G then it will use some of your data allowance.
If you download an album or a track then it will be downloaded onto your phone. You can't upload music to the cloud from an iOS device. Whether music that you've bought shows for streaming depends upon what country that you are in and if the album or track remains in the store (unless you've subscribed to iTunes Match), and if you are connected to a network.

Why text and button links on a PDF do not work in the iPad

I have Acrobat Pro 9.2.3 and InDesign CS5.
I've tried creating both button and text links directly from InDesign (Window > Interactive > Hyperlinks). I then export the multi-page PDF with "Acrobat 6 and Above" selected as well as the "Hyperlinks" and "Interactive Elements" checked. When I open the PDF in my iPad, none of the text or button links work.
Then . . .
I tried opening the same multi-page PDF in Acrobat Pro, and manually created the link boxes (Tools > Advanced Editing > Link Tool). The iPad still can't interprete these two interactive elements.
Any clues what I'm doing wrong?

Try exporting as ePub - now test inside Digital Editions and if OK - drag the file into iTunes and synch to iPhone/iPad.
It's probably a Preview issue as mentioned but exporting to ePub is good fun!
J.

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get

I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store

Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
Message was edited by: ChrisJ4203

In FF 34.0.5 I use to be able to click on a link within an e-mail and the link would open in a new tab; it now opens in the same tab; how can i change it back?

I'm using FF 34.0.5 (I like it). I use to be able to right click on a link, within an e-mail, and the link would open in a new tab. Now when I click on the link it opens in the same tab replacing my e-mail.
Example - a friend sends me an e-mail containing a link to a web site he thinks I'd like. I click on the link and go to the web site and then go back to the e-mail tab and reply to him. Now, when clicking that link, my e-mail disappears and is replaced by the new site.
How can I fix this? When this happened once before I was told to change the 'value' for a specific 'preference name' through the about:config page.
Can anyone help jog my memory?
Thanks!

Is this about clicking a link in an external program?
You can check this pref on the about:config page for external links.
* browser.link.open_newwindow.override.external (-1)
If this pref has the default value -1 then browser.link.open_newwindow is used.
* http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

ATP and Route Determination at Storage Location Level

Hi Experts,
I'm working on a project currently and one of the requirements is to have ATP and Route Determination at Storage Location level. I know SAP standard for this is at plant level but was wondering if anyone has had this requirement before, and if so what course of action they took to solve this issue.
Any help would be greatly appreciated.
Thanks,
Mark

Hi Mark,
in my previous project we have a customized table created for all the route determination and used mv45afzz move field to vbap to determined the route.
not sure if there is a easier solution but at least it is doable through customization for sure.

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How to remove connect and workbook link after pressing Save as,Print,Export

I have to remove the connect link and workbook link which appear AFTER pressing Save as,Printable Page,Export in a discoverer viewer report. I had already removed the link in the report itself with changing the uix files, but after pushing the link for export, save as or print the link Connect and Workbook still appear.
I know that I have to change something in UIX Files, but which one and what I have to change...? Have anyone an idea? Thanx for fast reply, it´s a urgent problem.
in addition: In metalink,otn and google were no solution...

If the tone really is a single (or at least narrow band) frequency like the picture shows, I'd try the Notch Filter on the Audition/Effects/Filter and EQ menu. It might take some playing around to get the exact frequency and tweak the amount of cut you apply vs. the effect it will have on surrounding frequencies--but if you can get the right balance, you can then easily apply this to the whole of every file.
Sorry, can't help on the Premiere Pro question since I only use Audition.

2 VSANs and FC Links To Storage

Similar Messages

Maybe you are looking for