2 WAP4410n create a group

i have an L3 switch 2 ports of it connected to 2 wap4410n access points
where here i want to group this lets say a single domain as
the person connected to WAP access point 1 should automatically connect to other access point 2. lets say a person connected to WAP access point 1 as when hezz on the move from one place to other place signal gets week and he is getting disconnected to access point , where he needs to access other wireless access point2 . now i  heared that grouping two access point in to one where he automatically gets connected to the access point which has the high signal strength.
Can anyone help me on this .. how should i have to configure in WAP4410n is there an option or whats the alternative step i can take it for this issue.
Thanks & regards
Srikanth

hi
can anyone of u suggest me on this issues
Regards
srikanth

Similar Messages

  • HT201269 How do I add another contact / recipient to an SMS. Easy in Android, but I can't see how on my 5s.  Have to create a group on my Macbook Pro (OS 9.1), but it's not getting synced via usb. I'd prefer not to use cloud.

    How do I add a contact / recipient to an SMS on iPhone 5s?  It's easy on Android, but I've not sussed it on the iPhone - can't create a group etc.  Tried to create a group on Mac, but it either doesn't exist or won't sync to the phone with usb, nor will other contact details created on Mac.  I'd rather not use the cloud.  I'm sure contacts used to sync to my old iPod touch in Snow Leopard.
    Is it not more logical to have the phone as the main source of this sort of data?  We're more likely to update on a device we carry all the time surely?
    Please advise. Thank you

    Hey Cornish wrinkly,
    It sounds like you want to create a group message. You can read about group messaging on the iPhone here:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • How to create a group calendar?

    Hello,
    i am sorry but this is one more question on wiki-group-calendars.
    *In short:*
    I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
    LONG:
    I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
    +"The web calendar allows you to easily schedule events for yourself or your group. ...+
    +There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
    +The web calendar uses iCal Server to store events and invitations. ..."+
    But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
    My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
    Thanks, Philipp.
    10.6.4 OSX Server
    10.6.x Clients

    farmer tan wrote:
    you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
    fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
    migrated from 10.5.7 to 10.6
    Message was edited by: farmer tan
    Could you be more specific farmer tan, please?
    You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
    I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
    Thanks in advance for any help you can provide.

  • Error while creating product group

    hi,
    i am getting error while creating Product group.
    Required parameters missing when calling up module
    Message no. M3749
    Please suggest me.. how to cop this
    Regards,
    amit

    Dear Brahmankar,
    I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
    Please suggest me , this process is correct or it will create any problem in any module .
    Thanks & Regards
    Prabhakar

  • I have created a group in my address book, but when I try to use it to send out a group email, only a comma shows up. How do I send out an email using my new group contact list?

    I have created a group in my address book, but when I try to use it to send mail, only a comma shows up. How can I send mail using my new group? I have an IMac with OSLion.

    I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

  • How to create new groups (list) for storing user's data?

    Hi,
    I'm using cq-5.4 and I was undertaking the campaign management tutorial which explains about how to send out a weekly news letter. As a part of that I was creating a sign up form for subscribers to fill out. So after filling up that form, user's data would get stored somewhere and eventually that data will be used while sending out the weekly news letters to him.
    This was the link I was referring to for that,
    http://dev.day.com/docs/en/cq/5-4/wcm/campaigns.html#Create a Sign Up Form
    So on that link, the 3rd screenshot talks about how to set the form action. They have for example set the form action to 'Create and Update Account' and accordingly under 'Action Configuration', 'geometrixx newsletter' is assigned as the 'Initial Group'. But they never talked about how to create the 'geometrixx-newsletter' group? Where to create that group etc. Hence, after completing the form when I press submit, nothing happens. In reality whatever data I entered should've got stored in the 'geometrixx newsletter' group.
    So that is the place where I'm stuck. Can someone tell me how and where should i create this group?
    Thanks!

    Hi,
    Thank you for posting the screen shots I have been unsuccessful in determining exactly where the problem is coming from. Would it be possible for you to post the actual VI so that I can work with it so see if I can reproduce this issue using your code? In regard to your questions:
    1.    You are correct 1000 samples read should write 1000 samples to the table
    2.    I believe the discrepancy is due to amount of manipulation done between the read and the file write but I cannot be certain, without the code to work with.
    3.     I am unclear as to exactly what is happening. If you are reading empty channels then you may receive erroneous readings this is to be expected. When you connected your accelerometer did you connect in RSE or differential? You can also manipulate the signal range with will affect the gain setting, how off are the readings?
    JaceD
    Signal Sources Product Support Engineer
    National Instruments

  • How do I (easily) Create a Group E-mail List

    First I want to say that I am not a dummy.  I’m pretty tech savvy, but this issue has been making me crazy for a long time.  I know that what I am about to describe be has to do (probably) with the fact Mail and Contacts work separately, unlike in Windows products.  The whole point of me moving to the Mac from Windows was to make things easier.
    I have tried to see if there’s an easy way to create a Group, but I can’t seem to find the handle on this.  I repeat, I am not a tech dummy. 
    Here’s the issue: Every week I send out an e-mail to a group of friends.  What I normally do (since I have not found an easier way) is to go to my Send folder, find the previous week’s email, copy all the addresses and paste into the new e-mail.
    On all the Help Discussion topics I see in the Apple Forums (I’ve been to many), what it says is that you go to Contacts, Create a New Group, and then click and drag e-mail addresses into the new group.  I get it, and I’ve done that for other groups.  But this is different.
    Is there not a way to simply copy all the addresses from the previous week’s email I sent and copy that into a Group?  There are too many names for me to go one by one inside the Contacts app.  Moreover, I don’t know all the contacts in the prior week’s list.  I’d have to go back and forth between the prior week’s e-mail and my Contacts list, and check names and e-mails, and then drag into the Group. 
    Please Apple, there has to be an easier way. 
    Macbook Pro, OS X Mavericks.

    I have this same issue. I have over 100 email addresses that I need to add to a group. The issue is not making the group, it's getting the email addresses from Mail to Contacts.
    Dragging the email addresses does nothing. You can copy the addresses, but there's nowhere to put them. You can make a VCF for an email address, but then you have to find all of them to add them to the group. How do you automate this?!
    I'm astounded that there's so little support for such a common issue for which people have been asking for years.

  • How do I create a group distribution email list with my contacts?

    I have many contacts and need to create email distribution lists with my contacts. It is too difficult to choose each contact with every email. How do I create a group contact list with my contacts on iCloud?

    Hello there, swcoxdpm.
    The following Knowledge Base article provides information on creating Group Contacts in Mavericks on your Macbook Air:
    Mail (Mavericks): Address messages
    http://support.apple.com/kb/PH14922
    Use a group address
    If you regularly send messages to the same group of people, you can save them as a group in Contacts, then use the group address to email them.
    Group contacts
    The steps to do that, are found here:
    Contacts (Mavericks): Group contacts
    http://support.apple.com/kb/PH15075
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Is there a way to create a group alias that I can text/message?

    Similar to an e-mail alias that contains multiple e-mail addresses which makes it easy to send one message to multiple people, I'd like to be able to create a group alias from some set of contacts in my Address Book that I can send a message (either text or iMessage if supported by the recipient) to.  Does the iPhone 4 running iOS5 support this and if so, how do I go about using this feature? 
    Note, I'm not looking for a group chat function where people have run a particular app in order to join a group, I just want to be able to easily send a message to > 1 person and if they want to respond it's directly to me.

    You can group your contacts, but you will not be able to send group messages natively. You need a 3rd party application for this. I have developped a free one, Easy Group, to create group of contacts (family, football team), and then send group texts and group emails.
    http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • Is there a way to create different groups for my contacts using the installed contact app

    I am trying to make a group on my contacts. So that it's easier to just make messages to people and not having to make group messages every single time. For example, making a group for a sports team so that I can just message everyone in the group at once.

    No not possible but you can create contact groups at www.icloud.com and if you have contact synced thru cloud the groups you make at www.icloud.com will appear on your phone

  • Is there a way to create a group in contacts without individual contact cards

    I need to send emails to 100 people at a time.  The addresses are in an excel spreadsheet.  How can I create a group without having to create a contact card for each individual?
    I'm using Mountain Lion.

    If you are referring to photo albums no you can't create them on the iPad with the current iOS software. You could not do it on the iPad original either as stated above.
    You can purchase third party apps that allow you to do so. One app that I know of is called Photo-Sort. I am sure there are others available in the app store if you care to search.
    You can provide feedback to Apple here and let them know how you feel.
    http://www.apple.com/feedback/ipad.html

  • How can I create a group Calendar in iCal, Mountain Lion

    How can I create a group Calendar in iCal, Mountain Lion?

    How can I create a group Calendar in iCal, Mountain Lion?

  • How to create a group in contacts

    How can i create a group in contacts on ipad1
    How to a link a contact to a group

    You have to use a 3rd party app to do this.  Several are available, including ABContacts and Speed Names.  For texting, these don't support iMessage but you can always start a group message to a set of contacts on your phone and then save to conversation to send a future message to the same list of contacts.

  • How to create a group of devices in MARS

    Hi folks.
    I have quite a list of devices which MARS pulls syslog from and the client's security policy requires to run periodic queries against those devices (they are 871 routers). Is there any way to create a group of devices and add it to the "Reporting devices" instead of manually checking every router.
    Eugene

    Anyone could suggest something???
    I'll try to be more detailed. There's a custom rule which is created to run a query for a specific event type. The query is run against many devices and the list of devices added to MARS earlier is quite big. So when you configure the rule at "Reporting Devices" section there is a limited list of devices (see attachment). I wish I can have a custom device type which will include all devices in question.
    Plus, why there's no "Select All" button for the right pane. This would be quite logical once you have a list devices showing in your right hand pane. Instead of going through all of them and click each one clicking "Select All" would be nice.

  • How to create a group with multiple data fields

    Post Author: RichS
    CA Forum: Formula
    Using CR XI.  Using CSV input from ODBC text driver.  No problems here.
    There are 3 fields that I want the same group by action.  Is this possible?) 
    If any one of these 3 fields change I want some header information and column fieldnames to display.  The header information I only want displayed on the first page (on the change) and the column fieldnames to display on every page.  I have played around with things like "InRepeatedGroupHeader" and "report group header on each page".  I am not getting all the results that I am looking for though.
    I want report to look like:
    Page header stuff  (to display on every page)  This data consists of some fields that will have static data and will display on every page.  And it consists of 3 non-static fields that I want to group on. 
    Group header stuff that I only want displayed on the first page on a change from one of the 3 fields mentioned above.
    Column headings that I want displayed on every page.
    Details data
    Group footer stuff (details not important for this)
    I get the expected output (column headings displayed on every page, and group header stuff display on the first page on each group change) with one group field.  But I want the group change to happen for all 3 fields.
    It seems simple but I can't find a way to create a "group" so if "field1 or field2 or field3" change, I get the same "group by" action.  I just need to know how to get the expected action.
    I expect that I might have some terms mixed up and/or some important information that would aide you in helping me.  If that is the case please re-post and I will add any missing or mis-stated information.
    Thanks,

    Post Author: V361
    CA Forum: Formula
    I am slightly confused, but perhaps you can create a formula
    Then group on the formula.  If this is not what you want, could you post some sample data, with the desired results.

Maybe you are looking for