2-way Trust Relationship between Windows and Mac Domain

Hi guys I hope someone can help me.
Just a quick explanation of what I am trying to do.
I have an Xserve running OSX 10.5.8 server, which is the OD Master. On that server I’m running Kerio mail server. I have a Microsoft 2003 server running AD.
The problem is I need to run BlackBerry Enterprise on the Windows server as the BlackBerry need active directory to work.
Since I have both system already running, I do not want to destroy my open directory just to get the BlackBerry working.
So what I have tried to do is create a 2-way Trust Relationship between the 2 domains, so the BlackBerry server will talk to the Kerio mail server.
The trust relationship appears to create fine from the Windows server side, but I’m not able to retrieve LDAP information from the open directory server.
The creation from the OSX server starts fine automated but then I had to finish it manually.
Has anyone else here created a 2-way trust relationship between Windows and Mac’s before? Any help on how you did it would be appreciated. Thanks

Have you checked on when the computer last checked in and changed the computer account password with the domain?  When a computer changes it's password, Active Directory will store only the current password and it does not expire.  The workstation
will store both the current password and the previous password.  This for cases when you may restore Active Directory to a point before the computer password change.  
To handle this, the workstation will try it's current password, then it's previous.
If you're restoring the workstation to a previous point in time, you may be rolling the stored passwords back too far for Active Directory to accept.  I would only imagine this to be the case a handful of times if you're going back 1-2 days.
Are you experiencing 100% failure?

Similar Messages

  • Share iTunes libraries between Windows and MAC

    Hi all i've an wifi via "Base AirPort" i've an HD shared between MAC and Windows sistem via the BASE, the iTunes library that i've stored in the HD is non redable for iTunes on Windows because it need an *.itl file...
    How can i share an iTunes library between Windows and MAC???

    I would like to report back that after struggling for months to get Tune Ranger to work that it is complete rubbish. The first time I tried to sync my libraries (between an empty iTunes library and my existing one) it created duplicates all over the place in my library and generally made a huge mess of everything. The support person (who I suspect is the only person over there) gave me some guff about my id3 tags being corrupt but it was clear that every song that appeared in a playlist was getting duped. Once I fixed this (many weeks later) I tried a one way sync after fiddling with the preferences of Tune Ranger to try to make it work, but it simply wouldn't.
    I don't know if anyway has had success using TR where they are also trying to sync playlists, but if you have, I would certainly like to know what you settings are.

  • Trust Relationship between PC and Domain broken\failed after System Restore

    We are currently faced with a problem that every time we do a System Restore on our Windows 7 workstation, upon login attempt, we an login failed because the Trust Relationship between PC and Domain is broken. 
    As solution: we have to log in as a local admin,  remove the workstation account from the domain, then re-add the workstation back to the domain.
    Does anybody know if there is a hotfix for this or how we can bypass having to remove and re-add the workstation to the domain in order to login?

    Have you checked on when the computer last checked in and changed the computer account password with the domain?  When a computer changes it's password, Active Directory will store only the current password and it does not expire.  The workstation
    will store both the current password and the previous password.  This for cases when you may restore Active Directory to a point before the computer password change.  
    To handle this, the workstation will try it's current password, then it's previous.
    If you're restoring the workstation to a previous point in time, you may be rolling the stored passwords back too far for Active Directory to accept.  I would only imagine this to be the case a handful of times if you're going back 1-2 days.
    Are you experiencing 100% failure?

  • Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
    http://answers.microsoft.com/en-us/mac

  • One way trust relationship between different domain windows server 2012 in different forest

    I'd like to build trust correctly between the domains A.local and B.int. A.local is on a Windows 2012 . B.int is on a Windows 2012 . Both machines are
    connected to the same LAN. The forest level in A.local
    machine is Windows Server 2008 and The forest level in B.int
    is Windows server 2012.
    I want a one-way trust relationship, i.e. users from A.local gain access to B.local.
    my problem it i create the trust put when i go to validate the trust between A.Local and B.int give me this error :
     The secure channel (SC) reset on Active Directory Domain Controller \\dc2.B.int of domain B.int to domain A.Local failed with error: There are currently no logon servers available to service the logon request.
    NOTE : Recently I
    UPGRADE THE Active Directory FROM 2008 R2 TO 2012 and i ping on A.local to B.int
    it is ping by name and IP but from b.int ping by IP JUST >>>
    ihab

    Hi,
    yes i already do it the setup conditional forwarding between the 2 domains and
    the firewall it is off 
    ihab

  • ITunes 9 - Using 'Home Sharing' between Windows and Mac libraries

    I have my main iTunes music library stored on my Windows 7 PC. It is currently around 200Gb in size, so pretty large.
    I want to be able to use 'Home Sharing' in iTunes 9 to access this library on my Macbook over my home wireless network.
    I don't, however, want to copy the music files themselves over to this laptop, but simply access the library over the network, and play them via either iTunes 9 or Front Row.
    I would appear that the Windows and Mac 'iTunes Library' xml files are incompatible. I can't 'Alias' the Windows library on the MacBook for this reason. Does 'Home Sharing' eliminate this problem? Is there a way of accessing the library on the Windows PC without copying all of the files over to the MacBook?
    I want to maintain a single library (which is often changing with new podcasts etc), rather than 2 libraries which I have to keep in sync.
    Does anybody have any ideas on this one? I'm sure I am not alone in having this problem.
    Here's hoping...:)

    Welcome to the Apple Community arifbangash.
    So far as I can tell you have settle homesharing correctly.
    The following article(s) may help you.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Missing files in catalog shared between Windows and Mac

    I switch between using Elements 12 on a Mac (Mountain Lion) and a Windows 7 machine while managing a common catalog.  The catalog and media are stored on an external USB 3.0 disk drive attached to whichever machine I am using to work.
    This setup works fine except that on computer #1, the Organizer “loses” media files computer #2 has worked with, and vice versa.  The problem seems to be in the way Elements stores the media file location.
    Example:
    My external catalog and media drive is named “JS” and assigned drive letter G: on the Windows machine.
    File “IMG_0310.JPG” is stored in directory “2007 08 18”.
    On the Windows machine the location seen in the Elements Organizer Information panel is “G:\2007 08 18\”.
    Using the Mac, Elements reports the file as missing, finds it, and changes the file location to “\Volumes\JS\2007 0818\”.
    Returning to the Windows machine, the problem repeats itself and corrects the file location to use Windows-style path names.
    This wouldn’t be so bad if Elements was faster reattaching missing files, but the search for the first few reconnects takes a very long time and the whole process grows longer the more work I did on the other machine.   This is a major annoyance and time drain.
    Elements documentation promotes the use of an external drive for sharing.  Someone else must have run into this same problem.  Is there a way to configure Elements to overcome the file location problem?
    Thanks!
    [edit]
    I realize PSE 12 is new and many are still on PSE 11.  Is anyone using PSE 11 experiencing this issue?

    Thank you for the response!
    Looking at volume_table there are indeed two entries for the external drive (rows 3 and 5):
    The Windows entry on row 3 shows the correct volume serial number in decimal as assigned when the drive was formatted.  The hex version is 7A85-0647.  The Mac entry on row 5 shows a serial number that doesn't make sense from a Windows or Mac perspective.
    This is interesting but I'm not sure what to do with this information.  It may not be a bug.  It would make sense from a development viewpoint to use the serial number to uniquely identify the drive and have separate entries for each OS tied together by that serial number, allowing the drive path to differ by OS.  Although, in this case the serial numbers do not match.  Maybe the Mac and Windows versions of PSE 12 are retrieving two different serial numbers and therefore do not see the drive as the being the same, which would be a bug.

  • Are Adobe licenses inter-changeable between windows and mac?

    I have bought initially a Creative Suite for windows and now I'm considering changing to mac.
    In the software license certificate I have a windows serial number and a mac serial number. Legally, can I use the same license, although with different serial numbers on a mac or windows computer? (Regarding the uninstallation of the windows version)
    Thanks
    João Almeida

    Order product | Platform, language swap
    Mylenium

  • Difference between Windows and Mac versions

    Could anyone tell me whether the files generated by the Mac version of In-design stricly identical to the *.indd and other files (templates, libraries) generated under Window? If not, what are the differences? Thanks in advance for any help.

    There is no significant difference, but they will not be bit-for-bit identical.
    For instance, the INDD file format records which version and platform of InDesign created the file, so that small piece of information will certainly differ. Also, historically, when Macs used non-Intel processors with different byte order, ID may have stored some numbers in reversed byte order. But since everything is Intel now, that's not an issue.
    In any case, there is 100% compatibility between both platforms. Mac ID can read Windows ID and vice versa.

  • Quality difference between Windows and Mac

    Well, that's the problem:
    The same song, (Skull and Crossbones by Klaus Badelt), played under my Mac partition or under my Windows partition is sounding different.
    I thought the speakers were broken, but it's not that. Under the Mac iTunes, it sounds horrible, it's distorted and compressed. Equalizer is set the same (Classical), the file is the same, same machine, same application (iTunes 7.6.2), everything is the same. Except the library size. Under Mac it's 13.4 GB, under Widnows only a 100 MB...
    Any ideas?
    Thanks

    Neither version of iTunes will make jewel cases.

  • What is the difference between Windows and Mac formating?

    Hello guys!
    My question is in subject, just wondering what is real difference and what kind of restrictions in usability i could expect?
    Thanks,
    Ivan

    Mac OS X uses a file system that it inherited from Mac OS called HFS Plus. HFS Plus is a metadata-rich and case preserving file system. Due to the Unix roots of Mac OS X, Unix permissions were added to HFS Plus. Later versions of HFS Plus added a journal to prevent corruption of the file system structure and introduced a number of optimizations to the allocation algorithms in an attempt to defragment files automatically without requiring an external defragmenter.
    Filenames can be up to 255 characters. HFS Plus uses Unicode to store filenames. On Mac OS X, the filetype can come from the Type code stored in file's metadata or the filename.
    HFS Plus has three kinds of links: Hard links, Symbolic links and Aliases. Aliases are designed to maintain a link to their original file even if they are moved or renamed.
    FAT32
    In order to overcome the volume size limit of FAT16, while still allowing DOS real-mode code to handle the format without unnecessarily reducing the available conventional memory, Microsoft decided to implement a newer generation of FAT, known as FAT32, with cluster counts held in a 32-bit field, of which 28 bits are currently used.
    In theory, this should support a total of approximately 268,435,438 (< 228) clusters, allowing for drive sizes in the range of 2 terabytes. However, due to limitations in Microsoft's scandisk utility, the FAT is not allowed to grow beyond 4,177,920 (< 222) clusters, placing the volume limit at 124.55 gigabytes, unless "scandisk" is not needed [3].
    FAT32 was introduced with Windows 95 OSR2, although reformatting was needed to use it, and DriveSpace 3 (the version that came with Windows 95 OSR2 and Windows 98) never supported it. Windows 98 introduced a utility to convert existing hard disks from FAT16 to FAT32 without loss of data. In the NT line, support for FAT32 arrived in Windows 2000.
    Windows 2000 and Windows XP can read and write to FAT32 filesystems of any size, but the format program on these platforms can only create FAT32 filesystems up to 32 GB. Thompson and Thompson (2003) write[4] that "Bizarrely, Microsoft states that this behavior is by design." Microsoft's knowledge base article 184006[3] indeed confirms the limitation and the by design statement, but gives no rationale or explanation. Peter Norton's opinion[5] is that "Microsoft has intentionally crippled the FAT32 file system."
    The maximum possible size for a file on a FAT32 volume is 4 GiB minus 1 B (232-1 bytes). For most users, this has become the most nagging limit of FAT32 as of 2005, since video capture and editing applications can easily exceed this limit, as can the system swap file.
    (From wikipedia)

  • Migrate Collections between Win and Mac versions of Bridge

    Would like to know if it is possible to migrate Bridge collections between Windows and Mac machines.
    On the two respective main machines one or two of the the root folder names differ, but the subfolder structures are the same.
    In addition, both machines can access other resources from a common USB drive, so that any collections of images from that drive will have identical paths.
    Would like to avoid repeating the collection-building process if it is possible to migrate the data from one machine to another.
    Please let me know what is possible.

    You could just copy the photos from one machine
    to another and then let the cache build.  You have to make sure you export the XMP files along with the photo or you will lose edits and some info.
    If you can move them with Bridge this is the best bet to keep all the pieces together.  If you are using just central cache you will have to explore the option of "export xmp files"in one of the dropdown boxes.  Not at a computer with Bridge on it..

  • Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system?

    Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system? When I try to connect from my iMac I get a window that says "The version of the server you are trying to connect to is not supported." Is there a work-around to this problem or is it just not possible? It would be largly appriciated for a solutin beings my business is a small town newspaper, and we have some important files on the older computer that need to be acessed daily.

    Actually to share files between OS 8-9 and OS X, all versions, is quite easy from what I read. Look here for some details.
    http://reviews.cnet.com/8301-13727_7-20003464-263.html
    And here.
    https://www.google.com/search?q=file+sharing+Mac+OS+9.x&oq=file+sharing+Mac+OS+9 .x&aqs=chrome..69i57.20706j0j1&sourceid=chrome&ie=UTF-8
    Or since both OS 9 and OS X can do SMB Windows sharing you could use that protocol to share files from one to the other.
    Doesn't really matter what OS you are using. Mac OS/OS X shar files with Windows computers of all types and versions of Windows so the same applies for the different versions of Mac OS/OS X.
    Each Operating System takes care of reading and writing files to there respective file formats of the hard drives so that does not have to be the same. They both just have to be able to do Ethernet with the same files sharing protocol.

  • Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

    Hi,
    SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
    But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
    the SharePoint Logs I found out the below exception
    11/30/2011 12:14:53.78  WebAnalyticsService.exe (0x06D4)         0x2D24 SharePoint Foundation          Database                     
     8u1d High     Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15' 
    11/30/2011 12:14:53.78  WebAnalyticsService.exe (0x06D4)         0x2D24 SharePoint Foundation          Topology                     
     2myf Medium   Enabling the configuration filesystem and memory caches. 
    11/30/2011 12:14:53.79  WebAnalyticsService.exe (0x06D4)         0x12AC SharePoint Foundation          Database                     
     8u1d High     Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15' 
    11/30/2011 12:14:53.79  WebAnalyticsService.exe (0x06D4)         0x12AC SharePoint Foundation          Topology                     
     2myf Medium   Enabling the configuration filesystem and memory caches. 
    11/30/2011 12:14:55.54  mssearch.exe (0x0864)                    0x2B24 SharePoint Server Search       Propagation Manager          
     fo2s Medium   [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes)  [indexpropagator.cxx:1607]  d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx 
    11/30/2011 12:14:55.99  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     75dz High     The SPPersistedObject with
    Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
    domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
    sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()    
    at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip... 
    11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     75dz High     ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)    
    at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
    persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state) 
    11/30/2011 12:14:56.00  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Topology                     
     8xqx High     Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.   
    11/30/2011 12:14:56.00  OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Timer                        
     2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
    sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
    targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
    T denyRightsMask)     at Microsoft.SharePoint.Administrati... 
    11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                    0x1994 SharePoint Foundation          Timer                        
     2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()    
    at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
    id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
    currentVe...
    Please guide me on the above issue ,this will be of great help
    Thanks.

    I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped. 
    The problem is caused by User profile Synch Service:
    UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
    The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
    Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
    targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
    identifier, T grantRightsMask, T denyRigh...        
    08/23/2014 13:00:20.96*        w3wp.exe (0x2204)                      
            0x293C        SharePoint Portal Server              User Profiles                
            eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)    
    at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
    Please let me know if you any solution found for this?
    Regards,
    Kunal  

  • The best way to transfer videos between devices and mac?

    I have an iphone 4s, ipad and a macbook pro - is there any way to transfer videos wirelessly betwen these platforms?
    As far as I know icloud only allows photostream of photos only but nit videos. This is quite inconvenient for video users as I normally take videos using my iphone 4s and would like to edit using ipad/mac's iMovie. I suppose I could transfer videos using a wire between iphone and Mac (still a PAIN without being able to transfer wirelessly), and what about between iphone and ipad? I understand Apple might be concerned about storage and speed for video transfer via icloud, if we could selectively do the transfer and have the option to delete them from icloud after the transfer it will be very much easier for video editor like myself.
    Or have I just missed something? Is there indeed a way to do so??

    If you want to transfer photos and videos from the Mac to the iPhone (but not in the other direction) you can use iTunes and sync via wi-fi: http://support.apple.com/kb/HT1386
    If you want to wirelessly tranfer videos in the other direction you may want to look into a 3rd party app such as http://www.photosync-app.com Note that I have not used that app so be sure to investigate others as well.

Maybe you are looking for