2 window view, isolate mode switches both to preview, instead of leaving 1 in outline

I wanted one of my 2 windows open to stay in outline mode when I switch the other window to preview mode.
can we do this please.
I work closely in outline on one window, and use the other to preview, however when I want to isolate a shape in the preview window to work on it, the other window loses outline mode and switches to preview also.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Similar Messages

Acrobat hang when window mode switching

After using Acrobat X for a bit viewing and/or editing a PDF it will lock up upon trying to switch to and from full screen.

Thanks for the reply. I think the issue is just confined to Mac machines + Adobe products (this issue doesn't occur when I switch from Word Preview 2016, or Office 2011). I can confirm this issue occurs on more than one Mac as well.
Here is a slightly larger GIF if the first was too hard to make out
https://i.imgur.com/CNKnkC0.gif
It's almost as if the text manipulation / selection from InDesign is carrying over to the Acrobat window, interrupting the normal focus it should get on first click...
Edit: It just occurred with Spotify - Switched from Spotify to Acrobat, with a scanned image PDF. The rectangular selection tool tries to grab a region of the image several times before focus returns to the Acrobat window. It also just happened after manipulating images and text in Word 2016 Preview and Word 2011.

Iphone 4S, recently updated to IOS 7.0.2 When I try to sync with my Mac window pops up saying iphone requires itunes version 11.1 or later. Disconnected, switched both off and back on, no change. Any ideas?

I have an iphone 4S, recently updated to IOS 7.0.2. Tried syncing with my Mac but window pops up saying iphone requires itunes version 11.1 or later. Tried updateing itunes but it says it's up to date. Tried disconnecting, switching both phone and mac off and back on, no change. Any ideas?

bristles wrote:
... the version I'm on is 10.5.8.
If possible... you need to Upgrade to Snow Leopard = OS X 10.6.x (which will Run iTunes Version 11)
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...
NOTE:
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

Yellow Boxes around type in normal view mode but not in preview?

There are these yellow boxes that appear around type when in normal view mode, but when in preview mode it disappears.....any idea of what I can do to alleviate this issue? Here is an image of the problem....

This link should explain it:
Field Guide to Composition Highlighting | InDesignSecrets

I was trying to load an online game, and it said "Shockwave Player Error-to view movie, please switch to 32-bit mode." IT WOULDN'T WORK WHEN I TRIED IT! WHAT SHOULD I DO! PLEASE HELP SOON!

I was trying to load an online game, and it said "Shockwave Player Error-to view movie, please switch to 32-bit mode." IT WOULDN'T WORK WHEN I TRIED IT! WHAT SHOULD I DO! PLEASE HELP SOON!

Update your Flash from Adobe's website. If that doesn't work, tell the webmaster they aren't using a portable version of Flash that is as compatible with as many browsers as possible.
Please don't use all uppercase. In internet etiquette it means you are shouting.

Maximized Window View Bug?

Or perhaps this is behavior I've just not noticed before?
Photoshop CS3 10.0.1
Windows Vista
Open two images that are large enough to not fit on your monitor at 100% view.
Maximize both windows. (Do not use F to change to Fullscreen, just maximize the windows.)
Set both to 100% (CTRL-ALT-0)
Use the hand tool to move to another position in the first image. Make sure that Scroll All Windows is NOT turned on.
Switch to the second image. At this point you can use the hand tool to move around, or not. It doesn't seem to affect the outcome.
Switch back to the first image. Notice that it is now not viewing the same portion of the image as you set it to before you switched. I would expect the view to remain the same, there is no reason for Photoshop to reposition the image in the window just because I switched to a different document.
Note that if I perform the same steps, but in either of the two Fullscreen modes, the view position remains as I left it.
Additionally, if I run this test in Fullscreen mode and then switch back to Maximized, sometimes the windows will behave as they did in Fullscreen mode (i.e. not repositioning), but sometimes they go back to the odd behavior.

>this card (NVIDIA GeForce 8400 GS)
Supporting is one thing... supporting WELL is another
My previous computer had nVidia card (3+ years ago, can't remember the model) and for everything to work, I had to use a specific version number of their driver software... which was NOT the newest driver at that time
Video card vendors are constantly issuing device drivers with new or fixed features... and sometimes, a newer version breaks something that worked in an earlier version
You may need to download several software versions, and install and test to find one that works on YOUR computer with YOUR software

Windows not reconising video switcher

Running windows via bootcamp when presenting it does not reconise vga out put via a video switcher but in mac mode its ok, when going directly a into plasma or projector it works fine in both windows and mac mode, any idea's

Could be an issue with your movie being encoded with the H.264 video codec. Windows users will not be able to view H.264 video without the latest version of QuickTime 7. If you don't want to make each PC user upgrade QT7, then your alternative is to use some other video compression codec, like Sorenson or MPEG-4. These will produce video viewable pre-QT7 but at visibly lower quality and slightly bigger file size.
I have chosen to format "for the masses" and avoid H.264 for the time being for videos on my own site. Not too big of a dealbreaker for me. Check it out for yourself.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

Mode switch key mapping problem

I searched a lot of wikis, forums but i didn't find out how to configure this.
I'm using the romanian keyboard layout, configured like this in xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "ro"
EndSection
Alt_R / Alt Gr is by default mapped to switch modes. I managed to make the left Win Key change modes, by making a ~/.Xmodmap:
keycode 115 = ISO_Level3_Shift
Now both Alt_R and the left WinKey switch modes. I want to remove the mode switch from the right Alt, because i need it for other applications.
I tried putting remove / clear keycode 113 in .Xmodmap but it didn't work.
Also, why is arch/linux(?) using "ISO_Level3_Shift" instead of Mode_switch?
this is my output from xev:
for left winkey:
KeyRelease event, serial 31, synthetic NO, window 0x2000001,
root 0x155, subw 0x0, time 14283222, (43,85), root:(466,375),
state 0x90, keycode 115 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES,
XKeysymToKeycode returns keycode: 113
XLookupString gives 0 bytes:
XFilterEvent returns: False
alt gr:
KeyPress event, serial 31, synthetic NO, window 0x2000001,
root 0x155, subw 0x0, time 14283906, (43,85), root:(466,375),
state 0x10, keycode 113 (keysym 0xfe03, ISO_Level3_Shift), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False

Solved it.
I tried to add Option "XKbOption" "compose:lwin" in xorg.conf but it didn't work.
Finally, I switched to US keyboard and defined the language specific characters using xmodmap. Could have done this in the first place but i thought there was a way to remove the Mode_switch from Alt Gr. It would have been more elegant.

X-FI mode switching broke after win upd

Windows update came up with an auto update for the Windows Media Player, and the mode switching broke on the soundcard. Musicmatch broke as well, and wouldn't get past the start screen. After uninstalling musicmatch, and uninstalling the sound card via the cd, and then updating the x-fi over the web, I still get the same message:
The audio device is not supported by the apllication. The application will exit. Or I get a chooser asking me to select the right audio device, anbd the only entry is Follow Windows Default.
Any help with this? Is anyone else having this problem?
TIA
Stretch

OIk, checked a feew things. Firstly, it had a shared IRQ after I installed the intel chipset stuff. I went ahead and moved the card to another slot, it reassigned as IRQ 4 in the bios, and 22 in the OS. Still plays system sounds, and WMP, but no creative or Musicmatch.
Creative Diagnostics says this about it
Why is it showing hardware disabled?
Device name: - Creative X-Fi Audio Processor (WDM)
Hardware location: - PCI bus 2, device , function 0
Status: - Device driver is loaded. - Device is configured. - Device can be rebalanced.
Problem: - Device has no problem.
Device capabilities:- Hardware disabled
Hardware ID: - PCI\VEN_02&DEV_0005&SUBSYS_00202&REV_00
Compatible ID: - PCI\VEN_02&DEV_0005&REV_00
System resources
IO ports used: - DCE0 - DCFF
IRQ channels used: - 22
Memory addresses used: - FBC00000 - FBDFFFFF - F4000000 - F7FFFFFF
Registry properties - Service name(SZ) : ctaud2k - Device class(SZ) : MEDIA - Device class GUID(SZ) : {4D36E96C-E325-CE-BFC-08002BE038} - Driver key(SZ) : {4D36E96C-E325-CE-BFC-08002BE038}\008 - Configuration flags(DWORD) : 0x009C000 - Manufacturer(SZ) : Creative Technology, Ltd. - (SZ) : Creative SB X-Fi - Device PDO name(SZ) : \Device\NTPNP_PCI000 - UI number(DWORD) : 0x009C0002 - Bus type GUID(BINARY) : B0 DF EB C8 0 B5 D0 80 E5 00 - Legacy bus type(DWORD) : 0x009C0005 - Bus number(DWORD) : 0x009C0002 - Enumerator(SZ) : PCI - Device address(DWORD) : 0x009C0400
I am sure it is a pretty simple problem. The app that keeps popping up when the error msg is generated is CTaudsel. It has it's own directory under creative, and when run directly, shows only :Follow Windows Default.
When the system was first reinstalled, the selector had all choices, including modem, and SB XCCO listed. I have no idea why they disappeared, but I think it was when the Intel Bus installed on the same IRQ, after upgrading the chipset drivers and installing the USB hub. It must have overwritten a file somewhere. Where? I don't know. IF I do happen to find a solution to this I will make sure and post it, as I know there are a couple of other people here having this problem, and there hasn't been an answer posted for it yet that I am aware of. Any pointers in any direction may help.
One more thing. I know both times the problem happened, I noticed it after playing videos from the browser, using the embedded WMP as a player. May be why there is a problem in the first place? Dunno.
TIA
Stretch

Install windows phone 8.0 sdk on win 10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

install windows phone 8.0 sdk on win
10 error Windows Program Compatibility mode is on. Turn it off and then try Setup again.

Also having this issue. I am unable to remove Windows Phone Emulator 8.0 on Windows 10 Technical Preview. Here is the relevant log file output
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT (CurrentOperation = "Uninstall")' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install") OR (CurrentOperation = "Repair")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT < v6.1) OR ((VersionNT = v6.1) AND (NTProductType < 3)) OR (NOT VersionNT64)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '(VersionNT = v6.2) AND (netfxfullredist_43_DetectKey < v4.5.50709)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'CompatibilityMode = 0' evaluates to true.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'ProfessionalVersion_DetectKey AND (NOT (ProfessionalVersion_DetectKey = "11.0.50727")) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition '( VS11BETA_MSENV_DLL_EXISTS ) AND ( VS11BETA_MSENV_DLL_VERSION < v11.0.50324.0 ) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey < v11.0.50727) AND (CurrentOperation = "Install")' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpressVersion_DetectKey AND (WPExpressVersion_DetectKey = v11.0.50727) AND (CurrentOperation = "Install") AND WPExpressQFEVersion_DetectKey AND (WPExpressQFEVersion_DetectKey < 38)' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress10_Exists AND (NOT SameLcidWPExpress10_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'WPExpress11_Exists AND (NOT SameLcidWPExpress11_Exists) AND CurrentOperation = "Install"' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: Condition 'NOT Privileged' evaluates to false.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Stop Block: CompatibilityMode : Windows Program Compatibility mode is on. Turn it off and then try Setup again.
[6554:4F4C][2014-10-31T13:33:53]: MUX: Detect Completed
[6554:4F4C][2014-10-31T13:33:53]: MUX: Wait for View to be loaded
[6554:40A0][2014-10-31T13:33:53]: MUX: Detect Completed, now create view
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: Validate custom path failed: Empty Install path
[6554:40A0][2014-10-31T13:33:54]: MUX: User feedback control is Enable because opt-in value is NotDefined
[6554:4F4C][2014-10-31T13:33:54]: MUX: View loaded
[6554:4F4C][2014-10-31T13:33:54]: MUX: Go to Blocker page.
[6554:4F4C][2014-10-31T13:33:54]: Detect complete, result: 0x0

Viewer audio problems with Desktop Cinema Preview

Hi
I'm using Destop Cinema Preview to output to an external video monitor from the video outpout of my iBook. I'm using a non-Apple patch to allow screen spanning offering me a full screen output from Final Cut Pro (not simply a mirrored desktop). This all works fine with video playing nicely on the external monitor from both the Canvas and the Viewer.
Where it often goes wrong is with the audio:
1. The audio in the Viewer is delayed and sounds like it's at the wrong sample rate.
2. Once this has happned in the Viewer, it may begin to happen in the Canvas.
3. Once it's happened in either, it won't stop.
4. Re-booting FCP sometimes restores normal sound in the Canvas, but not usually the viewer.
I've tried altering the Audio in User Pref from Low to High. This worked once. The problem is the same across different projects. I am using 48Khz in each case.
I've checked System Prefs in the OS, and there's no issue there.
The audio is output-ed from the headphone jack to an external amp, but shows the same symptom using the built-in speakers.
I do not have this problem when hiring in a deck and sending both audio and video out via Firewire.
I don't know if this is relevant, but I am also having problems recording VO through my MBox via USB 2.0 and into the Voice-Over tool.
Any help appreciated.
best
Aldo

Well folks, I took your advice and bought myself an Canopus ADVC110 with which I have a number of issues.
Here's my setup:
Firewire 6pin at the back going to my Firewire drive which goes to my computer (all faults below are the same when I go direct from the converter to the Mac).
Rear S-Video to plasma screen monitor.
Rear analogue RCA outs to amp.
Issues:
1. No throughput on the DV. ie if I plug a camera to the front 4pin Firewire, I can see the pics in FCP, I can control the camera, but I can't get FCP to save the captured file. To do this, I have to unplug the converter and plug the same camera directly to the Mac. I'd rather keep my setup, set up and all connected to my monitor.
2. The S-video output has a latency of a few frames. NB this is not an FCP issue as everything is in sync on the computer screen and both video and audio are leaving Apple's world via the same Firewire output. It's how the video and audio are leaving the analogue outputs of the converter that is the issue. Somewhere in there, the pics are getting delayed.
It's not a monitor problem either, as I've tested this using the VGA output. ie When my plasma screen mirrors my desktop, it does so instantly.
3. The analogue outputs are really noisy. They have a real sizzle. Again, I have tested all the cables and routes (replacing the ADVC110 with an iPod), and found there is no interference in the system until I re-introduce the ADVC110. I have also tried adjusting the DIP switches after powering down.
Has anyone else encountered these problems? I'm awaiting word from Canopus tech support too.
best
Aldo

Every time I click a folder arrow to open...finder reframes my window view. And other finder problems

When using the finder windows sorted either by name or date modifed, when I click a folder arrow, the window reframes to the center (or some other spot) that means I need to scroll back to the folder. When I change an item in a folder when sorted by date modfied, it of course moves to the top, but my window view stays centered where I am, and I have to scroll to the top to find the folder I'm working on. Both situations have the feel of "what I'm working on just dissappeared". I have become used to it, but it is one of the things in Lion that I hate. Is there a workaround...a way to keep the finder window view where it is when I click the open folder arrow, or to reframe to the top if I make a folder change and have the sort set by date modifed?
Mail behaves in the same manner where the view of read and unread wildly scrolls itself when clicking an unread mail. I have tamed this by creating a smart mailbox of unread e-mail, but it seems to be some system wide preference for an unknown sort view that I would like to fix.
Also, when I choose the sort by label option in the finder window, all the red pops to the top, but then all the other labels are scattered and not sorted as a for instance...
Perhaps this is fixed in Mountain Lion?
Thanks for any help.
I am preparing to upgrade to Mountain Lion this weekend, but if I have some system problem, I would like to resolve it before I go forward.
John

Hello Josegued,
Thank you for using Apple Support Communities.
It sounds like you may have a customized keyboard shortcut created. You can take a look at this article to see how to remove it.
OS X Yosemite: Create keyboard shortcuts for apps
Regards,
Jeff D.

X-fi Xtreme Audio - Can't access/install mode switcher

I've been trying to access the touted 'Audio Creation Mode' for its bit-matched playback and sound quality, however I don't have any of the fancy creative driver programs - instead I have a standard Windows 7 menu, with 8 tabs. (I'll try to get screens if it comes to it).
I double checked my drivers, I am on V .04.0090, however upon attempting to install 'Creative Sound Blaster X-Fi Xtreme Audio Pack .04.0079' , I recieve the error 'Driver Version is not found', preventing me from installing the mode switcher and audio console...
Stumped on how to fix this,? thanks in advance for any help and suggestions.

Well thanks, but in that case I'm confused by why the post the audio pack alongside the Xtreme Audio in the download section... surely it was meant to be compatible if placed there?

X-Fi Mode Switcher won't work in XP non-admin accou

I have installed X-Fi extreme music on my WinXP SP2 machine. Both audio console and the graphical console launcher/mode-switcher won't work properly in non-admin accounts. It will be "stuck" in one mode and whatever I do, it refuses to change to another mode.
Both work fine when I use the admin account. Please help. Thanks in advance.

Unfortunatly Im a greedy cuss and won't share my computer with anyone so I'm running in more or less Admin 24/7 and not ran into the issue. I think there is a setting in XP that you can change that will allow non-admins to make changes to the system. You might check User settings for the account in the "User Accounts" in control panel. Will see if I can find some info on it for you but you can also check MS Knowledgebase.

Images look different in Lightroom than in Windows viewer

I just bought a new NEC monitor, but had this problem with my old monitor too. I'm actually guessing its not a monitor issue at all.
When I view and edit an image in Lightroom then export it as a JPG it looks way more red and more saturated in windows viewer than in lightroom. My monitor is calbrated using a Spyder2. Is there a way to make my windows viewer have the same color? I hate having to open another application to review the edits.
Thanks
Chyna

Lee Jay wrote:
thedigitaldog wrote:
The Windows viewer, unlike Lightroom (or Photoshop and others) is not color managed. The previews in that app are incorrect. No, there is no way to make a stupid non color managed app, color managed.
Well, yeah, but you could export in sRGB and get a lot closer.
What’s the old saying? Close only counts in atom bombs?
Saving sRGB may get “closer” but it doesn’t ensure a match. Only using ICC aware applications can get us to that goal. And assuming someone, like myself is using an extended gamut display, something far closer to Adobe RGB (1998), an sRGB image in a non color managed app will look butt ugly. So no, this is not a solution. Using ICC aware software to view your images IS!

2 window view, isolate mode switches both to preview, instead of leaving 1 in outline

Similar Messages

Maybe you are looking for