2 Wireless routers, I can get out but not in

I was hoping you might be able to help me with my configuration, I've almost got it, there's just something I'm missing.  I've had a wireless G router (WRT54G) running nicely in my network for some time now, and since my wife and I both just got 802.11n capable laptops, I thought I'd like to upgrade and bought an N capable router (WRT320N.)
I would like to dedicate the N router to the laptops and use the gigabit ports for our wired computers/server downstairs.  I still have some G-only devices (PS3, Xbox, iPhone, older laptops) that I would like to connect to the old G router.  I also use my PS3 as a DLNA server so would like to be able to get to the wired server on the N router from the PS3 wireless on the G network. (I'll just use N and G router from now on, you know what I mean )
So, I pulled the G router off the network.  Configured the N router as DHCP, with an internal address of 10.1.1.1 and plugged it into the WAN port of my modem.  Plugged the G router into my laptop, and statically configured the outside interface as 10.1.1.254 and the inside interface as 192.168.1.1 and plugged its WAN port into one of the 'LAN' ports on the N router. (I left the internal addresses on the G router DHCP at 192.168.1.x, since I have some static addresses on the G network)
Back at the N router, I went into advanced routing and added an entry for 192.168.1.0 255.255.255.0 gateway 10.1.1.254 for 'LAN and Wireless'
So far so good.
I can connect to the G and N networks just fine, and can get out to the net from both of them.  I can get from the G network from the N network just fine.  Where I am having trouble is getting from the N network to the G network.
I went back to the G router and turned off all the security settings (Block Anonymous Internet, Filter Multi, Filter Internet NAT) but just can't quite see what I'm doing wrong.
I can't even ping 192.168.1.1 from the router.
I sure would appreciate any help or suggestions!
Thanks,
Dan 
Solved!
Go to Solution.

Try setting the G router in 'Router' mode, rather than 'Gateway' mode.
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

Similar Messages

  • I upgraded to lion today and just realized I am not receiving any mail. I can send out but not receive. i'm using a POP Road Runner account. Any help appreciated.

    I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.

    Try Mail->Window->Connection Doctor.  If there is a problem reported, try:
    Open Mail->Preferences and check your settings.
    If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account

  • Whilst travelling we have plugged in an optus wireless broadband, we can receive emails but not send them, we normally use an adsl broadband connection

    whilst travelling we are using an optus wireless modem, we can receive emails but cannot send them.
    == This happened ==
    Every time Firefox opened
    == we used the optus pre paid boadband usb modem

    Hello Carol.
    Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issue, you need to provide more information. Firefox is not an email client. You may be having a problem with the email client you use, or with the site you are using to handle emails...

  • Can call out but not receiving calls

    I can call out to any number but when you dial the phone number(yes it is the right #) it says phone not in service.

    We have had the same problem for almost a year now.  We can call out, and the number is correct.  Cannot receive any calls, message says number not in service.  Meanwhile I have to pay both AT&T and Comcast so I don't lose my number.   When I call Comcast I am told the problem is not on their side.   I will be calling the Illinois Commerce Hotline and filing a complaint against Comcast.  I have asked for a credit on my bill, since I am not receiving the service I am paying for, and no response from Comcast. Maybe a lawsuit is in my future for failure to provide services that were paid for.   

  • Unable to log onto a website I can get there but not log on

    I have done everything I can think of following suggestions from Firefox. I am unable to log on to a website I am at all day. I am able to get to the website but once I try to log on it say connection timed out. This has been going on since last night. I am able to get to any website but this........can you please help me I can not think of what else to do. Thank you

    restart and hold Command+r to enter in recovery mode and ill allow you to repair your OS X installation. If you cannot repair it, then just create a new user, as usually issues with keyboards are rooted in the user's account.
    Good luck

  • Can't use gmail in Safari - can get mail but not send or reply

    I can't send or reply to emails in gmail when using Safari? Only get error message that it was "unsuccessful and try again." But then can't
    even delete it or close it out - just keeps going back to that same error message. Have to quit gmail to get it back. Can receive all
    the emails no problem.

    Exact same problem here. IMHO, I think it started when Software Update installed the latest version of Java. Can't be certain about that though.
    I AM able to send/reply via Firefox, however.
    MacBook, MacOSX 10.6.8

  • I have a macbook air that is not connecting to the internet correctly.  I've had it connected for three weeks, it went into sleep mode, and will not reconnect.  It will connect to other wireless routers (I've tested it) but not the one at my apartment.

    The problem is not happening with any other device that I have.  My iPad, iPhone and another laptop all connect fine.  In fact, it's not even the connection.  The computer will connect to the net.  It just will not open any page.  It starts to open and then hangs and hangs.  It will not move.  Weird since it worked great for three weeks and then all of the sudden, nothing.  Click on Safari and I have short hope that it will move and NOTHING!  Any thoughts why it would hang up like this and only with this specific network? 

    This is a known Lion issue, hopefully solved in 10.7.3. But may not be solved immediatly after updating, that was my case.
    To make it work i followed those steps.
    1.- Restart
    2.- Lion 10.7.2 Update
    3.- Uninstall netwokrs
    4.- Shut down
    5.- SMC reset
    6.- Reinstall networks
    I dont know whether all the above steps are necessary, but for me the update didn't work properly before SMC reset. (I am running a MBA mid2011)
    Hope it helps,
    Cheers

  • I changed my e-mail address a few months ago everything was ok. Starting monday my outgoing mail can not be sent, it says the server rejected my e-mail address. Why ? I can receive mail but not send it

             My outgoing mail gets rejected. I can get mail but not send it.It was working for about 6 months.

    If the smtp is rejecting your password you should go in.
    Mail -> Preferences -> Accounts
    Select your Yahoo account in the sidebar on the left.
    In account information tab you will see : " Outgoing Mail Server (SMTP) "
    Click on it and choose edit SMTP server list.
    Select Yahoo and click on the advanced tab.
    Now fill your new Yahoo password.
    Hope it's help.

  • The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    The "join" button on both my iPad and iPhone is grayed out. Network can be seen but not joined

    I've reset the password a few times and know I am using the correct one. I get the same error on both my iPad and iPhone. Both see the network but maybe there is a problem with the router. I've also reset that a few times with no luck. Thank you.

  • I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    System Preferences>Displays
    There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

  • I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    I can use Mail at home, no problem. But when I travel, I can receive mail but not send it. I get a "server can't be reached" message. Yet when I send a photo using iPhoto, it gets sent. Help!!

    To diagnose problems with Thunderbird, try the following:
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • On a new mail message in Yosemite there is no Send button or icon.  Only a grayed out word that says "send.  I can receive mail but not send because nothing at top of email allows sending

    On a new mail message in Yosemite there is no Send button or icon.  Only a grayed out word that says "send.  I can receive mail but not send because nothing at top of email allows sending.  Please help.  This is true of two .me accounts I have.

    Hi,
    It may pay to send a Screen Shot of the Connection Doctor info.  (see the Window Menu)
    It would seem the IMAP or POP side is logged in bit the out going STMP server is not.
    8:27 pm      Monday; December 22, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have had not problem until today.  I can receive mail but not send. Any easy suggestions of what to do?

    Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have not had problems until today.  I can receive mail but not send. Any easy suggestions of what to do?

    I have been having the exact same problem for weeks now with gmail.  None of my computers will send Gmail (they will recieve) and my Maverick computers (10.9.1) show gmail smtp.gmail.com as "offline".  I had installed Post Box and apple support thought it was that i had too many accounts (I have 2 ipads, an iphone (latest iOs), a work and home iMac and a powerbook).  I disabled all my gmail accounts in Mail and still no go from PostBox either . I tried connection doctor and it just spins for outgoing and say I either haveve the wrong pw or login - I dont.  I terminaled and tested port 465 (according to gmail instructions) and it works (port 25 did not).  I can access gmail from the webmail and send/recieve mail from it and it shows up in my webmail outbox. It is configured for imap.I just cannot send mail at all from any gmail account from any apple device using Mail (or PostBox). I am at a loss as was the apple support person who wished me good luck very politely and sympathetically.

  • TS3274 My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • Discount for new product.

    it is a scenario where iam not able to get the logic pls help me, A new material is launched, so company wants to give a special offer for the first 5 customers and after which only a particular number range (ex: 3500- 3800), system should give 5% di

  • Problem filling item text in BAPI_PR_CREATE

    Hello guys,     I am using the bapi BAPI_PR_CREATE. I am having problems on filling up the text in the item level. I used the textID 'B04' the text will supposed to be in the 'material PO text' text field but it instead was placed in the 'item text'

  • Obtaining qualifier and table name in describe

    Determining qualifier and table name in describe Is there a way in OCIParamGet() on a statement handle/OCIAttrGet() sequence to determine the qualifier and table name? Otherwise, how can I get this information? When doing a join and listing the colum

  • Best strategy for deleting data

    For example: I should delete a lot of data from big databases. There are a lot of indexes and I know about the problem with the Bayer trees which must reorganized by the DMBS at every delete. If there a faster way to delete a big pile of data from th

  • RoboHelp 8 for AIR - Comment Feature

    I'm currently using RH7. I noticed in the marketing blitz for RH8 it mentions that the RH packager for AIR allows user comments to be posted within your help project. I'm trying to understand if this means: a. User makes comment on their C drive for