2 xboxes or ps3's with open nat for the rv042? yes i can!

i signed up specifically to tell future and current rv042 users that after a year of muckin' around with this fairly advanced networking technology, i've finally discovered how to open the nat types of 2 xboxes, instead of one being open and all others being moderate or strict. i'll break it down simply, 3074 port forwarded for the one, and dmz host for the other one. i couldn't figure out for the life of me, why the dmz host wouldn't open the nat type of the 2nd xbox at first, thats when it dawned on me that xboxes aren't capable of understanding the rv042 dmz host. so i tested the dmz host on my computer and it worked, putting my computer wide open to all ports on the internet. so what i tried was internet connection sharing, plugging my xbox wired into my computer which is set as the dmz host. i was all excited, jumping up and down for joy when i had succeeded in what took me an entire year to figure out. why so happy, do you ask? i don't think all of you know just how painful it is to not be able to open the same port more than once on the same network, very, very, aggravating. if you are having the same problem and don't understand how to do what i've explained, just ask. i cannot stand the thought that there are others out there like me that haven't been able to figure this out, it just causes me more pain. i will help.

I am having the same issue. My roommate and I both have our own copies of MW3 and our own xbox 360's connected to the same router/modem. We have Verizon Fios and the modem is an Actiontec MI424WR. We have no problem playing at the same time online as long as we are not in the same match. However, when we try to play in the same match, we can never get into a match. It just keeps cycling through the "searching for matches screen. We were at one point having issues with the OPEN NAT type but that has been solved, don't have me how, it just started working after I set the router back to defaults and we haven't had issues since.
I tried the link above, but that doesn't seem to help my issue and I think you are having the same issue has me. If you figure it out, please let me know.

Similar Messages

HT1498 Today I tried to rent ,this means war, it plays ok but always comes up with an error for the sound, also we can't play anything on AirPlay tonight , the icon doesn't even show up

Tried to watch, movie, "this means war, but couldn't get any sound working , always came up with error, also we tried to play things from you tube and iview but the icon for the apple tv wasn't there, we switched and restarted the Internet, wireless(airport ) and even restarted our iPads , but could play anything thru apple tv, even on my computer (Mac book air) the icon was there but only allowing to p,au on the MacBook air,there was no option fir apple tv, I also restarted the apple tv, still nothing working
I'll try agin tomorrow , the 22 July and see if anything is working
Cheers lilian

I am experiencing a similar problem in Windows 7 64bit. Since my laptop has a 128gb SSD, I have loaded my iTunes library on to an external drive. I can sync my iPhones and iPads from this library, and the songs play fine from those devices. However, when I select a song from my library, and click the play button, nothing happens. iTunes does nothing. I have also tried right-clicking mp3s in my library and selecting "Play", with no results. I do not receive an error message of any kind.
I have also noticed that some of my mp3's within iTunes denote the Time as 00:00. The same mp3's will play and register properly using other mp3 players on my computer, and they also play normally on my iPhones and iPads.
I am running Windows 7 x64 on a Lenovo T530, in iTunes 11.1.3. Everything else in iTunes appears to function normally. I can listen to internet radio stations without an issue, through iTunes, and they play as they should. I have tried three different external drives, with different drive formats, and they all have the same issue. If I copy my iTunes library back to my internal drive, iTunes will play my mp3s.
I did not have this issue with iTunes 10, so I am assuming it is something that has occured within the last few updates.
Has anyone found a fix for this? Unfortunately, I am forced to use iTunes 11 because of my iOS devices, otherwise I would revert to iTunes 10.

Very recently, when I click on a link sent to me in an email, Firefox opens my homepage plus a separate page for the link. Up to 3 days ago, only one window would open specifically for the link. How can I stop this?

I'm running a Mac with system OS 10.5.8. and the latest version of Firefox.
== This happened ==
Every time Firefox opened
== One week ago

That is a bug on Mac: https://bugzilla.mozilla.org/show_bug.cgi?id=531552 - Firefox 3.6b opens two windows when opening external links
(please do not comment in bug reports, you can vote instead to show your interest)

When i open a new tab even i have set the start page in "blank" babylon home page keeps coming on.always on new tab.never when i open firefox for the first time. what can i do to fix the problem?

i tried to find any babylon programs on my computer but i didnt found something.

'' get rid of babylon toolbar and get back home page"
see the first answer, the one from the-edmeister in
:https://support.mozilla.com/en-US/questions/860950

WRT160N V2 - Connecting TWO Xbox 360's with OPEN NAT...a nightmare. :(

Need to run two Xbox 360's on a WRT160N V2 both with open NAT.
This must be possible...somehow.
I've tried a few times through the linksys support chat (which seems to be gone now?) to get this working properly but always fails. I've got my http://192.168.1.1/ open, so please if anyone knows how this works that'd be just awesome.
Both 360's are connected via wire. We want to be able to play the same games at the same time in the same party while both having an open NAT. Right now only one of us can have an open NAT while the other has a Moderate or Strict. We have plenty of speed, but that stupid NAT makes it nearly impossible for us to connect to games together. Then even when we DO connect to a server/lobby it takes forever for that lobby to fill up with other players as they can't connect to US. Painfully annoying.
I DID do a search of this very forum and found a thread or two, but they are very long and I am having a hard time filtering what is correct or not. Too many people saying different things with no reponses as to whether or not their solution worked. I'm still reading through them, I'm not a technician in any sense and don't want to mess it up more than it already seems to be. I am capable of reading/following instructions, so if anyone knows I'll give you all my "One Free Internet" coupons.

You can try this link and it will help you in setting up your XBOX with your Router. And for your 2nd XBOX Enable DMZ and assign a Static IP to your XBOX.

Opening NAT for Modern Warfare 2 on my PC

As I'm sure many of you are doing as well I've been playing Modern Warfare 2 since the night it came out. It is telling me that I have a strict NAT on my router (WRT160n V2). I've searched on the forum and all I can find is information on opening the NAT for the xbox 360. I run mine on my PC and I'm wondering what ports I need to open, and whatever else it would take to make Call of Duty run the absolute best possible. Thanks in advance for any help.

i had this issue for a while. first i dmz'd through my dsl router to my desktop and everything came through fine. it wouldnt allow me to do this with my lap top though. i know that is not a good idea and it was just to check if it would open the nat at all. After some tinkering i had to call my isp and ask them to help me set up the modem so it would just pass all the info to the router. I know that the original poster of this thread has cable but i am posting something in here since it is a similar issue and it might be able to help some one. Once i set my router to PPoE and had the correct ports forwarded my nat opened on the laptop. i also turned the firewall on my router off and left upnp.
* UDP 1500 (outbound only, no forward needed)
* UDP 3005 (outbound only, no forward needed)
* UDP 3101 (outbound only, no forward needed)
* UDP 28960
I have dsl and a wrt160

How to calculate with holding tax for the open item

Dera all,
Can you tel me how to simulate with holding tax for the open item? i will try do it using FI_WT_F110_CALCULATE FM but it dosnt work. plz help me
regard
nawa

Hi Sushil,
can you please elaborate on how you resolved it. we are facing the same issue with BAPI not calculating the withholding tax data.
Thanks,
Sanket

Details of open invoices for the current year/ material price analysis

Hi,
I'm very new to SAP SD,MM modules. Can any one help me in the following of my requirements?
1. How to get the details of open invoices for the current year? Which table should I look into?
2. I have to create a report to display material price analysis. How should I do that?
3. How to develope a report to list out all the Open Sales Order with earliest ship date and requested ship date
4.How to create an interactive report for displaying plant status to know the status of a particular material
5. How to develope a report on Sales Order displaying Sales order Number, Sales order date, Material, PO Date and Customer requested date
Thanks in advance!!
Uma.
Message was edited by:
        Uma Ravi

Hi Ravi,
for 3, 4, 5 --> u can go through the code ...
REPORT ZEX2 MESSAGE-ID arc NO STANDARD PAGE HEADING.
Tables :kna1,vbak.
SELECT-OPTIONS : so_vkorg FOR vbak-vkorg OBLIGATORY,
                 so_vtweg FOR vbak-vtweg OBLIGATORY,
                 so_spart FOR vbak-spart,
                 so_kunnr FOR kna1-kunnr.
DATA : BEGIN OF sales_open OCCURS 0 ,
       vbeln LIKE vbak-vbeln,
       auart LIKE vbak-auart,
       kunnr LIKE kna1-kunnr,
       bstnk LIKE vbak-bstnk,
       lfstk LIKE vbuk-lfstk,
       fkstk LIKE vbuk-fkstk,
       gbstk LIKE vbuk-gbstk,
       END OF sales_open.
DATA : BEGIN OF itm_sales OCCURS 0,
       vbeln LIKE vbap-vbeln,
       posnr LIKE vbap-posnr,
       matnr LIKE vbap-matnr,
       kwmeng like vbap-kwmeng,
       lfsta LIKE vbup-lfsta,
       lfgsa LIKE vbup-lfgsa,
       fksta LIKE vbup-fksta,
       fksaa LIKE vbup-fksaa,
       gbsta LIKE vbup-gbsta,
       END OF itm_sales.
DATA : l_kunnr LIKE kna1-kunnr,
       l_vkorg LIKE vbak-vkorg,
       l_vtweg LIKE vbak-vtweg,
       l_spart LIKE vbak-spart.
DATA: v_statusl(20) TYPE c,
      v_statusb(20) TYPE c,
      v_statusf(20) TYPE c,
      v_statusg(20) TYPE c,
      v_status(20) TYPE c,
      v_field(1) TYPE c.
data : v_openqty like vbap-kwmeng.
**Selection Screen Validations.
AT SELECTION-SCREEN.
PERFORM validations.
*&      Form Validations
*       text
* --> p1        text
* <-- p2        text
FORM validations.
**Customer
IF NOT so_kunnr[] IS INITIAL.
    SELECT SINGLE kunnr INTO l_kunnr
           FROM kna1
           WHERE kunnr IN so_kunnr.
    IF sy-subrc NE 0.
      MESSAGE e002 WITH text-005.
    ENDIF.
ENDIF.
**Sales Organization
IF NOT so_vkorg[] IS INITIAL.
    SELECT SINGLE vkorg INTO l_vkorg
           FROM tvko
           WHERE vkorg IN so_vkorg.
    IF sy-subrc NE 0.
      MESSAGE e003 WITH text-006.
    ENDIF.
ENDIF.
**Distribution Channel
IF NOT so_vtweg[] IS INITIAL.
    SELECT SINGLE vtweg INTO l_vtweg
            FROM tvkov
            WHERE   vkorg IN so_vkorg
             AND    vtweg IN so_vtweg.
    IF sy-subrc NE 0.
      MESSAGE e004 WITH text-007.
    ENDIF.
ENDIF.
**Division
IF NOT so_spart[] IS INITIAL.
    SELECT SINGLE spart INTO l_spart
            FROM tvta
            WHERE   vkorg IN so_vkorg
            AND     vtweg IN so_vtweg
            AND     spart IN so_spart.
    IF sy-subrc NE 0.
      MESSAGE e005 WITH text-008.
    ENDIF.
ENDIF.
ENDFORM.                    " Validations
Top-of-page.
PERFORM sales_top_of_page.
Start-of-selection.
PERFORM sales_sel.
*&      Form sales_sel
*       text
* --> p1        text
* <-- p2        text
FORM sales_sel.
SELECT vbeln auart kunnr bstnk
     lfstk fkstk gbstk
     INTO TABLE sales_open
     FROM vbakuk
     WHERE vkorg IN so_vkorg
     AND   vtweg IN so_vtweg
     AND   spart IN so_spart
     AND   kunnr IN so_kunnr
     AND gbstk NE 'C'.
LOOP AT sales_open.
    WRITE:/4 sy-vline,
           5 sales_open-vbeln HOTSPOT ON COLOR 2 INTENSIFIED OFF,
           16 sy-vline,
           17 sales_open-auart COLOR 2 INTENSIFIED OFF,
           27 sy-vline,
           28 sales_open-kunnr COLOR 2 INTENSIFIED OFF,
           40 sy-vline,
           41 sales_open-bstnk COLOR 2 INTENSIFIED OFF,
           55 sy-vline,
           56 sales_open-lfstk,
           76 sy-vline,
           77 sales_open-fkstk,
           96 sy-vline,
           97 sales_open-gbstk ,
           117 sy-vline.
    HIDE sales_open-vbeln .
ENDLOOP.
ENDFORM.                    " sales_sel
*&      Form sales_top_of_page
*       text
* --> p1        text
* <-- p2        text
FORM sales_top_of_page.
WRITE:/4 sy-uline(114),
     50 'OPEN SALES ORDERS' COLOR 7 INTENSIFIED ON .
WRITE: /4 sy-vline,
          5 'SalesOrder' COLOR 1 ,
          16 sy-vline,
         17 'OrderType' COLOR 1,
         27 sy-vline,
         28 'Customer' COLOR 1,
         40 sy-vline,
         41 'PoNumber' COLOR 1,
         55 sy-vline,
         56 'Delivery Status' COLOR 1,
         76 sy-vline,
         77 'Billing Status' COLOR 1,
         96 sy-vline,
         97 'Processing Status' COLOR 1,
         117 sy-vline .
WRITE:/4 sy-uline(114).
ENDFORM.                    " sales_top_of_page
AT LINE-SELECTION.
SELECT       a~vbeln
               a~posnr
               a~matnr
               a~kwmeng
               b~lfsta
               b~lfgsa
               b~fksta
               b~fksaa
               b~gbsta
               INTO TABLE itm_sales
               FROM vbap AS a JOIN vbup AS b
               ON a~vbeln EQ b~vbeln
               AND a~posnr EQ b~posnr
               AND b~gbsta NE 'C'
               WHERE a~vbeln EQ sales_open-vbeln.
IF NOT sales_open IS INITIAL.
    LOOP AT itm_sales.
      at end of vbeln .
      sum.
      v_openqty = itm_sales-kwmeng.
      endat.
      WRITE:/5 itm_sales-vbeln,
                itm_sales-posnr,
                itm_sales-matnr,
                itm_sales-kwmeng,
                itm_sales-lfsta,
                itm_sales-lfgsa,
                itm_sales-fksta,
                itm_sales-fksaa,
                itm_sales-gbsta.
    ENDLOOP.
ENDIF.
skip 2.
write:/ 'open Quantity for the order is ', v_openqty .
for 1.
open invoices..
SELECT vbeln
         fkart
         kunag
         gbstk
         INTO TABLE it_billing_h
         FROM vbrkuk
         WHERE vkorg IN so_vkorg
         AND vtweg IN so_vtweg
*        AND spart IN so_spart
         AND kunag IN so_kunnr
        and   year in p_year                  ---->"parameter for year..
         AND gbstk NE 'C'.                   "----> open invoices
for 2..
2. refer TABLES mara, EINA ..
regards,
VIjay

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Has anyone come up with a solution for the WD Passport and Mavericks OSX issues yet?

I was wondering if anyone has come up with a solution for the newer Macbook Pro/Mavericks and external WD Passport not mounting problems?
I have a couple of year old WD Passport that worked fine in my old 2009 Macbook Pro, the problem is the old computer crashed.
My dilemna; My new 2014 Mackbook Pro will not open my WD Passport, called WD Support, their answer, sorry, nothing has been solved.
Is there anyway I can get access to my files on the Passport with any other software, or by using a PC.
I am aware of reformatting the HD, and have read all the forums I could find and have tried installing the WD Update as well, (with the support tech from WD) and nothing works.
I know that my WD Passport works, so please don't suggest checking it, or the cord.
I appreciate all the help anyone can offer, and I am with all the rest of you struggling for solutions.
Thanks so much

Hi everyone, this is what I did
1. upgrade disks to the latest firmware
2. de-install ntfs-3g and MacFuse.
3. Re-install NTFS 3G without Macfuse.
4. Next step: Install OSXFUSE latest version with selection MacFUSE compatibility layer.
5. Last step: Install Fuse Wait
Note: between steps 2 and 5, I restarted my machine.
It worked for me, after about 4 hours.

I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported) any advice ??

I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported). any advice ??

Mac OS X Lion has dropped support for Rosetta, the feature that allowed you to run PowerPC apps on previous OS X systems. Check if you can find a newer version of the app you are trying to run that supports Intel processors.
What application are you trying to run? Maybe I can help you find a version that runs on Lion.

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

Problems with Photoshop cs4 for the Mac

I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--Kenoli

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

There was an error opening database for the library....

my latpop had a kernel panic wihile i was using aperture to impor pictures "that yes i have deleated off the memory card," shut down and restarted. upon restarting i was presented with this error...

there was an error opening database for the library....
what is ....? Is the path to your main Aperture library printed there, or is Aperture trying to open a different location? If it is a different location, launch Aperture on your correct library, by double clicking the library.
If it is indeed trying to open the correct library package, try if repairing and rebuilding the library with the "first aid tools" will help, see this manual page on how to do this:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
If the problem persists, when trying to repair, check if there is a crash report and post the first 60 lines.
Regards
Léonie

2 xboxes or ps3's with open nat for the rv042? yes i can!

Similar Messages

Maybe you are looking for