2 ZS Platinum with Logitech 5300e- No sound comes from rear speake

I just bought a new 2 ZS Platinum sound card and I use fairly new Logitech 5300e 5. speakers but no matter what I am playing, no sound comes from the rear speakers. However everythingh sounds fine in the front left, center and front right. As most posts on this board would suggest....yes, all speakers are securely connected and the switch on the back of the subwoofer is set to 5.. Windows control panel is set to 5., and so is everything else that asks. Im pretty sure I installed it correctly because the card shows up and I can hear good sound but only from the front. I read somewhere that I still needed a codec called ac3 so I downloaded it but there is still no sound. I updated the card with the latest driver which looks like was released in 2005. Is there ANY way to get real 5. sound? Do I need to purchase something else, a new codec? Any help will be appreciated. Thank you!

Does the speaker test work in 5. channel mode? If it doesn't then it would like the X-Fi's lost the centre channel.
In that case you can try unplugging your speakers, changing into 2.0 mode plugging them back in and then changing to 5. channel mode and just fiddling about. 'tis a common problem with the X-Fi on a fresh install to lose or merge channels. There's no fix for it but to fiddle with the speaker/THX console settings and to plug and unplug stuff until the X-Fi decides to route stuff properly.

Similar Messages

  • XP 64 bit - 5.1 - Rear Sound comes from front Speak

    Hi,
    i have upgraded from xp 32 bit to XP 64. I have a problem with my elite pro:
    This card ist playing now the 5. rear sound on the both front boxes. I'm extremly frustrated because i'm trying to solve this problem since 5 Hours. I have tried a lot of drivers - the rear sound comes from the front.
    Anybody any idea ?

    "You know, you could just walk behind your computer and switch the cables front and rear cables... "?Brilliant, that would make all sound come out the rears. Why didn't I think of that??I've cleaned and reinstalled, tried drivers without updates, updates without drivers, the best i can do id enable CMSS 3D and get a kind of *******ised stereo that i cam fade front to rear. I cannot get 5. separation with XFi XtremeGamer Fatalty Pro under XP64 and 4gB RAM, and it REALLY pisses me off that I accidenetally helped the OP and I'm stuck with the same issue LOL.

  • Just upgraded my 2014 iMac to yosemite. Now my Bose sound link won't work. The bluetooth is connected and it beeps as normal, just no sound comes from the speaker. This is very frustrating (along with the now flat rather than 3D icons on the desktop)

    I have just upgraded my 2014 iMac to YOSEMITE. Now my Bose Soundlink bluetooth speaker connects, beeps as normal, but produces no sound from the Bose speaker whatsoever. HELP PLEASE

    I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
    Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
    The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
    Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
    http://DingDingMusic.com/Manuals/

  • Please help me with one question . I have a problem with the left earphone. The sound comes from the speaker on the other side and lower. What is it? I will be grateful for the answer!

    Выберите свой ​​поддержка Сообщества Apple, Имя пользователя .
    Ваше имя пользователя является ваш публичная идентичность в поддержку общин Apple. Она не может быть изменена после создания учетной записи .
    Пожалуйста, помогите мне с одним вопросом. У меня есть проблема с левой наушников. Звук поступает из динамика на другой стороне и ниже. Что это такое? Буду благодарен за ответ!

    Not clear what you are asking
    However be aware the iPhone only has ONE external speaker at base of iphone the other grill is a microphone
    The speaker is on right below screen

  • Audigy 2 ZS - REAR sound comes from FRONT speak

    This is an odd one.
    My "surround sound" is busted. All sound meant for the rear speakers come out of the front speakers, even in the "Test Speakers" control panel where it says each channel. The ONLY place this works from is in the Speaker Calibration control panel, where it plays the test sounds and has you adjust the volume/balance between the LR/FB/center channels - the test music plays properly there - but that's the ONLY place.
    My setup used to work - and as far as I know nothing has changed, except maybe an updated SB driver.
    Any ideas?

    Redfi've878 wrote:
    Just updated to the latest drivers and this is exactly what is happening to me. Anyone ever come up with a fix?
    With the help of another user, I figured it out.
    Do you by chance have a Logitech QuickCam Pro camera? If so, it is setting the audio hardware acceleration setting to "Basic". It can't be restored to Full without unplugging the camera, setting it to Full, then rebooting, or disabling the camera's automatic echo cancellation function.
    I hope this helps!

  • IPT4 doesnt play through INTEMPO dock while an old ipod does. sound comes from ipod speaker only. why not thru dock speakers?

    My old iPod works fine in an INTEMPO dock. My new iPod touch 4 will only play in the dock thru its own speaker and there is also a 'not charging' message.
    Is the dock not up to handling my iPod Touch4?

    Two possible reasons:
    - The configuration of the 4G iPod prevents the iPod from fully seating in some older docks, those not deisgned for ohe 4G.
    - Some docks are not compatible with the later iOSs
    Have you went to the manufacturer's support site?

  • I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

    I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

    See the following thread on the same topic:
    2 Thunderbolt displays   MBP = sound coming from both displays?

  • Sound comming from two of of 5 speak

    my computer uses Creative SB X-FI(or at least i think.) I dont really understand aduio that much, safe to call me a noob. I use my reci'ver as the man and use a 24 ft. cord that connects to the reci'ver and goes into an audio adapter. Basically turns the two red and white things into a one thing that goes in head phone jacks. Well in the back there are many different color things for the speakers, and then below that there are only 4,(plated in gold.) When i use creative software to detect speakers it says my rear right is my front right, and my front left is my front right, and then nothing else has sound comming from it. My computer is month old, and its probally not the computer. My speakers are 3 front sony dreamstyles and in the back i have some small logitech speakers. My reci'ver is a Sonydream syle. Every thing else works such as t.v. and video games. Please fix this its anoying to hear out of 2 speakers while listening to music =(

    There're some thing which aren't clear.
    To get 5. speaker sound from yer speakers, you'll need 3 cables which convert the stereo mini-plugs into 2xphono jacks. The first one is for the front left and right, the second for the rear left and right and the third is for the centre channel and subwoofer.
    These are colour coded ( there should've been a sticker with yer soundcard so that the gold plated connectors can be identified ).
    The plug closest to the big rectangular connector with the pin holes is for the centre/sub connection, the one next to it is the rear left/right and the one next to that is the front left and right. On the subwoofer output ( I think ) the left output is for the centre channel and the right output is for the subwoofer.
    Taking one cable at a time, plug it into a jack on the soundcard and then plug the two phono plugs ( the other end of the cable ) into the corresponding inputs on the receiver.

  • [iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

    Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
    Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
    Anyone has the same problem? Or has some solution on this issue?

    Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

  • When headset is inserted, why does sound continue to come from the speaker?

    When headset is inserted, why does sound continue to come from the speaker?

    Sure your inserting the headset into the Headphone Out port and not the In port..?
    Also what headset....?
    Most PC based headset with built in mic's will not work without using a device like the Griffin iMic.

  • Satellite A200 - crackling sound comes from the HDD

    Hi
    I have Satellite A200. When I start my notebook the crackling sound comes from the hard disc.
    Does anyone know something about this?
    Thanks
    Vikas

    In my opinion its nothing wrong with your HDD.
    My HDD clicks everytime while accessing any data on the notebook and everything run ok since 3 years.
    But this doesnt mean that there is no hardware problem with your HDD. Generally its not easy to say when an HDD wound starts to malfunction. My first HDD died after 6 years of usage. But the other HDD died after 1.5 years. This damage was covered by warranty.
    Finally I would recommend backup your data always on an external HDD to prevent the data from damage.
    Bye

  • When I connect my iPhone 3GS to my PC, a bizarre sound comes from the speakers of the PC.

    This is a strange problem. When I connect my iPhone 3GS to my PC, a bizarre sound comes from the speakers of the PC. The sound is constant and low but irritating.
    Please can anyone help?

    This didn't cross my mind. Becuase no other device is causing the problem. Still, I am going to contact them. Thanks though.

  • 5.1 sound system. sound comes from only 2 speakers. why??

    5.1 sound system not working. sound comes from only 2 speakers. other 3 speakers not working. sound system; creative sbs a520

  • I put a case on my iPod touch 5 and now there is no sound coming from the speaker.  The head phones work though.  I called Apple Support and the 2 people I spoke with seemed baffled.  Has this happened to anyone and how do I resolve this?

    I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker.  There is sound when we use the headphones.  Is there a mute function that I may have switched on and if so how do I turn it off?
    It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
    Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device.  Who h has not helped.
    HELP!!!!!!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • What are the characteristics of the sound output from the speaker iPad3?

    What are the characteristics of the sound output from the speaker iPad3?

    man -s4 proc
    or
    http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
    Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
    Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
    process whose procfs directory is being accessed.
    tim

Maybe you are looking for

  • How do I change the color on the task icon in my calendar?

    Hello! I just got a Blackberry Pearl 8110 and I want to take the most out of the calendar feature. I set so it shows my tasks in the calendar - I'm currently using the weekly view. The little icon/dash that shows up in my calendar to indicate the due

  • Error when creating the form Pay ESS "Salary Statement"-Benefits and Payments

    Dear All. I have a issue when genere the PayError when creating the form Pay ("Salary Statement"-Benefits and Payments) Thanks in advance Regards

  • Column to Table link

    Hi, I have a question about what seems to be a little oversight within the HTMLDB product. Having said that I hope it something I have missed rather then an oversight. We keep data in tables on buildings, floors, components etc. Over this table struc

  • View on materialized view giving error while selection

    Hello Guys, My Oracle DB is 11gR1, Enterprise Linux is the operating system. I have a materialized view in my schema, if described this is the output: term_id          number(10) class_id     varchar2(4) section_id     number(10) acad_year_id     num

  • Setting pf-status on selection screen isue...

    Hello Gurus, I have a sample code as below. Now when I execute this one system automotically creates a default application tool bar, menu bar, etc. Now, I have a requirement where I have to add a custom button in application toolbar but the other def