20" ACD - Can you adjust Contrast, RGB, Luminance, etc?

Hi all -
I have a calibration tool coming my way (i1 Display 2). Part of the calibration instruction is to adjust brightness, contrast, color, and luminance of the device it's self (before profiling). However, the controls on the side only adjust brightness. Is there any way to adjust these other parameters of the actual LCD?
Thanks,
Thomas

For most LCDs, the only reasonable panel control for an LCD is the brightness control. Everything else should be altered by a custom profile. Controls that emulate the ones you find on CRTs can do more harm than good and are usually there for show. You'll find that generally, the more you pay the fewer controls are on the monitor. See this thread.

Similar Messages

  • New iOS 7 is very difficult to see screens. How can you adjust contrast?

    I upgraded my iPhone to iOS 7. How can I improve the contrast on all the screens and apps. Most screens are all white or very light with smaller text and I can barely see anything, especially when out in the sun.  Is there a setting to change or a way to improve the contrast? 

    Settings -> General-> Accessibility -> Increase Contrast
    You can also turn on the setting for Bold Text. Those two options should help at least somewhat.
    Regards.

  • Satellite 4300: Can you adjust contrast?

    Hi All !
    I've just bought an old 4300 Pro and whilst I can find the brightness control on the screen, I can't find any contrast adjustment. Can anyone advise please
    ( would prefer not to have solutions that involve removal of motherboard etc
    - too depressing ! )
    Thanks
    #Pete

    Barrie
    Its got Windows 98 ( not sure if its 98 or 98SE ) I have just adjusted
    Accessibility Properties to Show High Contrast in Settings - that seems to have helped a little. I'm sure theres room for improvement though ; - my last Laptop sittting next to me - lonely and discarded had far better contrast - - perhaps I should have just bought a brand new laptop - the only trouble is my 13 yr old daughter takes out her frustrations on the laptop - probably why the last one expired !!!
    Thanks for the link anyway - perhaps the drivers need updating.....
    Cheers Pete

  • Can you adjust the number of recent calls that are shown?

    Can you adjust the number of recent calls shown on the iPhone?  I'd like to have more displayed than it shows so that I can view more of my call history (further back).

    Tell Apple:
    http://www.apple.com/feedback/iphone.html

  • Can you adjust the pitch of a track in the middle of a song in Logic Express?

    Can you adjust the pitch of a track in the middle of a song in Logic Express? So have the first  40 bars in C minor and the last 16 in D major for example?
    Thanks

    Hi,
    the question is what you want to achieve by doing so. Obviously, transposing is easy. Split the track into two regions. The first region is original pitch, the second is to be transposed. Select the second region. Enter the desired transposition value in the region inspector. Make sure the checkbox "no transpose" is UNchecked in the track inspector.
    HOWEVER: You cannot "transpose" minor key into major key. This is because the intervals of full steps / half steps is different for minor and major. The 3rd and the 6th step is a half step in minor, while it is a full step in major. Therefor you must adjust the MIDI events in the piano roll editor to change minor to major and vice versa.
    Fox

  • Can you adjust the length of time the screen stays lit?

    Can you adjust the length of time the screen stays lit?

    but you can't lengthen it unfortunately.
    Bear in mind, the screen is the largest consumer of power.

  • Can you adjust the tint on the built-in isight camera on an iMac?

    Can you adjust the tint on the built-in isight camera on an iMac? It is curently too red on my iMac.

    The iSight has no mechanical parts. The iSight will adjust to the light by changing the sensitivity of the sensor's receptors. It is possible to manipulate the picture with software routines and simulate slow shutter speed. For photography look [here|http://www.boinx.com/fotomagico/overview>.
    Message was edited by: CodLBi

  • Greyscale image, can't adjust contrast/levels.

    A very recent problem - I have some greyscale scanned images - nothing fancy, batch-scanned via document feeder at 600 dpi - and my problem is this: I try to adjust contrast or levels, I see the effect I want in the image as I do so, but when I dismiss the contrast/levels dialogue, the change doesn't 'stick'.
    I can delete parts of an image, paint-bucket for example works fine, I can save. I expect it's something obvious :(
    OS X 10.3.9, Photoshop CS2. Memory is 1.25Gb (yes, I'm a lightweight ;) )

    No. What I'm saying is they are
    i like
    bitmap mode, in that scanned grayscale images of line or halftone pics tend to have very little gray information. It's made mostly of black or white pixels. So Level or Curves adjustments have little effect. In addition, you will get a FALSE preview on any Level/Curves adjustments on these types of images when viewed at less than 100%. Just as you describe.
    Same thing would happen if you took a detailed 1-bit file and converted to grayscale. The Levels/Curves adjustments would be available. A preview at less than 100% might show that Levels are lightening or darkening. But when you commit the command, the adjustment seems to disappear! That is because you only have 0 or 255 pixels, you can't lighten white and you can't darken black and there are no pixels in-between to affect.

  • Can you adjust the fan speed? How?

    I had an espiode the other day where the MacBook got so hot that it basically shut down. Can the fan be adjusted and how do I get to the area to adjust it? I am fairly new to the world of MacBooks and would appreciate the advice.

    You can easily adjust the fan speed by using smcFanControl:
    http://macupdate.com/info.php/id/23049
    That said, it sounds a bit strange that the MacBook would run so hot. The fan should adjust itself to the CPU warmth. If that is not happening, I'd investigate whether the fan really works.

  • Can you adjust the sensitivity (Skipping through Transients)?

    Protools lets you skip through your waveforms while editing (quick). Logic goes to every little waveform (Transient) to detailed. You know when you go to BeatMapping when you adjust the sensitivity to lets say (50) it goes to the Highest waveform and marks it.
    What I want to do is in the (Arrange Window) >I want to skip through and cut up my waveforms by the Highest Peaks of the wave! (Does that make sense)

    I have 10 drum tracks regions marquee selected and I have the kick track selected and when I shift right arrow all the tracks are analyzed but I want ONLY the kick's transients to be analyzed since there is no noise between the hits. The noise and non gated low level signals are causing the transient detector to make a stop every little step I do not want this, nor do you. How do we use this feature and still make the cuts across all the tracks based on the kick's transients ?

  • How can you adjust vertical photos in the interactive image widget?

    It appears that adding a vertical image to the Interactive Widget automatically crops the top half of the image and won't let you adjust the default view.
    Anyone else having this? Solving this?

    Same problem. I cannot move the default position of the image. If you hide the Title, then at least the full image is visible, but it cannot moved and it is aligned to the top of the image area.

  • Can you transfer all apps info etc from one ipad to a new one

    I have a new ipad and want to transfer everything from my old one to the new one. Can this be done and if so, please can you help with how?

    If you have all of your content in your iTunes library then you can simply backup the old device, then restore that backup to the new one. Otherwise see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How can I adjust the font size, etc., when completing a PDF form in Preview?

    I would like to use Preview to fill-out or complete a PDF form.  The default font that Preview uses when I begin typing in a field is too large.  How can I adjust the font size.  And while I'm asking, can I also adjust the font color, weight, emphasis, etc.?

    Whilst in the Preview application, press "Shift - Command - A" (⇧⌘A) simultaneously to show the markup toolbar, or click View, and select "show markup toolbar". There is an icon "A" near the right hand side of the now visible markup toolbar, click this icon to reveal all the font options. 

  • How can I adjust contrast on Apple Support Sites, etc.

    I have a great problem with Apple web content.  Even this attempt to type my question is plagued by the same issue: There is not enough contrast between the letters I just typed, and their back ground.   A big problem for me, as it seems the font color chosen by this apple web page and its background color chosen by this webpage, are creating an almost impossible eye strain and are terrible for people suffering from various forms of eye disease such as cataracts, makular degeneration, etc.  I am one of them.  I use Zoom for most of my computer work and generally can do everything  on my Mac. Except change this lack of contrast on any website created by Apple web designers.  Apple Update sites urging me to change my OS to Yosemite are completely  unreadable to me!  I need somebody to read its faded print to me.   I dread to change to an OS that I probably cannot read because some web designer who want to design a contrast combination that is more "far out" than the previous one.  There are millions having such eye diseases and computers are one way to let them enlarge and see things needed for their continued function.  Contrast settings in Accessibilty  Preferences do not alleviate the problem as they simply seem to make the screen brighter if increased.
    Is there any Application that would let me change the contrast settings of a website designed by Apple?

    Thanks for the hep I will contact the suggested Apple site.  As a guy who worked with Apple computers since they were black and white pack-backs its nice  to know that I am not the only one to notice that there is a big problem here. 
    I experimented again with the Accessibility Preferences/Contrast settings on my MacBook Air, and discovered that If I slide the indicator to the right to "Enhance Contrast", the opposite happens on my screen: I have less contrast so that grey fonts wash out into the white back-ground more and more as the pointer is moved to the right. 
    I never had to adjust the settings since I bought the MacBook with OS 10.6, and its function could have been reversed by OS upgrades since then o my present OS 10.8.5, or it could have been a problem since I bought the computer (used) from my Apple dealer. 
    I never had to adjust the contrast settings until now, since my eyes became weaker, and the Apple websites started using fonts of too similar a color to the background they are printed on.
    So with that in mind it could be a hardware problem such as a reversed +/- wiring connection to the screen, a reversed diode on the motherboard, or a short in the diode wiring, a reversed OS code setting that reverses the direction of the contrast setting for its control.
    It could also be Malware or a Virus, which has not been detected by the OS, nor the latest Norton on my Macbook Air..

  • Can you adjust track lengths of livetype when in FCE?

    Was wondering if it is possible to adjust the duration of a livetype track (.ipr file) in FCE without going back and editing the original .ipr file in livetype. There is no animation, it is just a straight text track. Seems like that would be a simple thing to do, since you can do it with tiff images and photoshop files.

    Have you tried using the *Ripple Tool* (RR) in the timeline to adjust its duration? That should work for the file as a whole. If you want to adjust particular layers within the LiveType file you have to go back and edit it in the application.

Maybe you are looking for

  • Unable to capture video from webcam in JMF

    hi I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?

  • Can Time Machine be used for extra drives?

    I have a Mac Pro and currently have two drives in it, a system drive that's using as the startup disc and for most of my use. The 2nd drive is more like a server drive which is used on that system but also shared with all computers on my home network

  • How to Post XML Messages with SOAP Headers to a Trading Partner URL

    Hi All, Greeting to the Oracle B2B Community. We are currently working on how to post a Custom XML Message with SOAP Headers to a Trading Partner URL. I would really appreciate if anybody could provide me some inputs or links to some documentation on

  • Nokia 6111 camera flash wont turn off

    Hello, can someone help, ive got a nokia 6111 and the flash wont turn off. I've went into the camera function and turned the flash off but its still on! its very annoying can someone help?

  • Using a BufferedReaderobject in a StreamTokenizer

    I can't seem to figure out how to use the BufferedReader object I have created (called input) as the source for a new StreamTokenizer. I do this StreamTokenizer adder = new StreamTokenizer(System.setIn(input)); and it says variable input not found in