20" ADC Display Totally Black - No Image

I've searched the forums at length, but now need to post and request advice.
- I have a 20 inch acrylic ADC Cinema Display.
- The display was working perfectly until Christmas Day when I opened my G4 to install my new SATA PCI hard drive controller card.
- The computer was (of course) powered down. However, I confess that I forgot to pull the AC cord.
- I powered up the computer enthusiastically after installing the SATA card (along with a 500MB drive) and was devastated that my display was completely black.
- There is no image at all, not even a faint one that you might see with reflected light.
- The power touch-button at the lower-right works perfectly. It fires up the G4, and stays lit without any blinking pattern.
- It is evident that the computer knows the display is connected and thinks it is working fine. When I connect a second monitor to the DVI connector on the Radeon 9000 video card with the 20" Apple display connected to the ADC connector, the computer goes into dual-display mode, but naturally the main display is the ADC which remains completely black.
What I've tried:
- Reset the computer using the little button on the motherboard.
- Reset the pram using the startup key sequence.
- I connected my failed monitor to my son's G4 (which uses an identical 20" display that was purchased at the same time) via his DVI-ADC adapter. My failed monitor still did not work with his known-good ADC output. Therefore, I confirmed that the issue is with the display, and not with my Radeon 9000 card.
- Most importantly, I opened the display and installed a brand new genuine-apple replacement inverter board. The display remains completely black. (I was so sure the new inverter board would get me back in business...)
Is it possible that my stupid mistake of not pulling the AC plug while poking around in there caused all of the CCFL bulbs to blow?
Could it be the other board, called the "main board?"
How about the ADC cable? Is it prone to anything relevant?
Any ideas???
I just cannot bring myself to give up and simply discard this beautiful display, On the other hand, I obviously cannot just keep wasting money on parts that are difficult if not impossible to return.
Help, and thanks for listening.

I would also check all them pins on the ADC connector to see if any are bent or pushed in. The other thing I can possibly see is the main board in the display. If that is the last resort check out Moniserv for price and availability. I really don't think you blew the display by the power cord being still attached to the computer. It's odd that that should happen at the same time as the SATA card addition . The CCFL bulbs don't blow like that especially in pairs, I really think it's that monitor cable. I also am perplexed.

Similar Messages

  • Ever since the last Firefox update (12 April 2013), Yoono 7.7.17 displays totally black; reinstalling Yoono doesn't help.

    At lunchtime yesterday when I went online, I got the message "checking add-on compatibility with this version of Firefox;" subsequently, the Yoono sidebar displayed as a solid black box. Disabling and re-enabling Yoono didn't help, nor did removing and reinstalling Yoono, nor did restarting the computer. I've come to rely on Yoono to advise me of YouTube & Facebook updates without me having to directly visit my YouTube or Facebook home page and scrolling through all the updates myself - and I really miss not having the Yoono sidebar around!

    please directly contact the extension developers - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

  • In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

    In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

    AshwinVC wrote:
    I reset the system and issue gets resolved.
    How? 

  • Why are my images totally black in CS6?

    Something strange has happened to my PS CS6.  Now when I import a photo into PS from LR, the image appears totally black.  What's going on?
    Bob Kozma

    I wanted to change the destination of the photos.  You do this along the
    top of the import page where it says, "Select a destination," but you
    find the place you want it to go on the left side.
    No, this is wrong. You do indeed select the destination at the top right of the Import dialog but you see either the same destination folder or a sub-folder in it, if you have chosen that option, on the bottom right. The left side is only sources from which photos can be copied or added.
    When the images were downloaded, I went over to the right side and I believe actually found all the photos were gone.
    If the photos were downloaded (something which is not certain from your description) the Import dialog would have closed, putting you back in the Library module. But the right side panel of the Library shows only a histogram, Quick Develop, keywording tools, metadata readouts, etc., so it is hardly surprising that you did not find folders and image files there. They are found on the left.
    I went back, in LR, on the right side [?] to my Root Folder, in which all of the images in their folders are stored under Pictures and set up an import.
    Imported using the "Add" option in order to catalog them in place or by making copies or moving them to another location?
    The images all returned to LR, but they were no longer organized in their folders.
    Perhaps because of not understanding the Import interface you moved or copied them to a different destination and it is this alternate or second location that the catalog now refers to.
    Does this clarify?
    No, I'm afraid not. Maybe if you spent a bit more time understanding the layout and structure of LR's UI, you could explain your problem better.

  • N8 Display turns totally black when incoming call ...

    My N8's display always turns totally black when there is an incoming call, or even when the
    alarm rings. Before  can see the caller's name and answer the call, I have to disable the screen's "keylock".
    I tried to find a point  in the phone settings wher I can avoid this, but didn't find any. Is anybody out there to give me a hint ? 
    Thanx in advance

    When I am inside, the screen acts normally: it goes black when held close to face.  It returns to normal as soon as taken from my face.  However, the screen also goes black if I am outside in daytime when I have an incoming call, and when I make calls also, as soon as I press the green call button. It "thinks" it is near my face.  If I slide the button on the right side of the phone down twice, the screen lights back up normally but the touch screen will not function.  At that point I cannot answer the phone, or if I'm already making a call I cannot hang up nor press the speaker phone button.
    There is nothing over the face of the phone.  I removed the protective plastic cover but that did not help. 
    This seems to occur only when I am outside in the sunlight, so it has something to do with a sensor, either light or heat.  
    I am aware that this problem has occurred on other N8s.  I have not found any solutions for it.  Perhaps it is not a problem on every N8.  I updated the software last week to 111.040.1511 Symbian Belle.  That software date is from 2012-07-28. 

  • I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

    I have the Photoshop Elements 11 and when I use the stamp effect the image becomes totally black. It used to have my line drawing in white, now, just a black image. I need the stamp effect. also, most other effects simply crash the program.

    Which operating system are you using?
    Some filters like Filter>Sketch>Stamp need to have two different colors for the Foreground and Background set in the toolbox.
    Press the D key to set the default toolbox color swatches to Black and White and then try the Stamp filter.
    If your using mac os x 10.9 or 10.10, then some of the filters under Filter>Sketch will crash pse 11
    They are Filter>Sketch>Comic, Graphic Novel and Pen and Ink
    Otherwise resetting the pse11 editor preferences might resolve the crashing.
    Go to Photoshop Elements Editor(Edit)>General, click on Reset Preferences on Next Launch and then restart the pse 11 editor

  • Display is shifted almost 2" frm left to right n left portion is totally black why?

    Dear  Hp Team
                            Last 2 hrs. i m facing the problem in my moniter problem is below..
    display is shifted almost 2" frm left to right n left portion is totally black why?
    Pls help
    Neelima

    Hello neelima,
    What kind of monitor are you using?
    Have you tried adjusting the monitor display? Usually on the bottom of monitors are keys to be able to shift the screen left / right, up / down.
    Have you tried resetting back to default settings?
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • 10.9.3 - Display is black after waking up from sleep

    I have a Retina MacBook Pro that I connect to two monitors at work in clamshell mode, 1 via HDMI and 1 via the MiniDP -> DVI adapter. Typically, before leaving work I put the machine to sleep manually before unplugging everything.
    Since upgrading to 10.9.3, almost everytime I open the lid of my MacBook, the display is black and will never initialize. It's not off as I can see that the backlight is lit. I can't find any key combination that does anything other than just holding down the power button.
    This is a serious issue as it essentially prevents me from being able to continue any work from my desk to home.
    I've done the usual, cleared SMC, PRAM.
    Below are the logs prior to waking up the machine. It seems that it attempted to wake-up some 10 minutes before I opened the lid and didn't find any displays. It then goes into this weird mode.
    The 4:28 event is the "wake up" while it was still in my bag.
    At 4:41 is me actually opening the lid and getting the black screen.
    Any advice? This did not happen in 10.9.2, even once.
    5/21/14 4:28:35.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    5/21/14 4:28:35.000 PM kernel[0]: Previous Sleep Cause: 5
    5/21/14 4:28:35.000 PM kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
    5/21/14 4:28:35.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 0 (rounded time weighted average 0)
    5/21/14 4:28:35.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 0 (rounded time weighted average 0)
    5/21/14 4:28:35.000 PM kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 1 milliseconds
    5/21/14 4:28:35.000 PM kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
    5/21/14 4:28:35.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    5/21/14 4:28:35.000 PM kernel[0]: TBT W (2): 0x0100 [x]
    5/21/14 4:28:35.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    5/21/14 4:28:35.000 PM kernel[0]: en0: 802.11d country code set to 'X0'.
    5/21/14 4:28:35.000 PM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    5/21/14 4:28:35.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    5/21/14 4:28:35.427 PM hidd[68]: MultitouchHID: device bootloaded
    5/21/14 4:28:35.932 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Inactive
    5/21/14 4:28:35.933 PM configd[18]: network changed: v4(en0-:10.40.3.117) DNS- Proxy- SMB-
    5/21/14 4:28:35.933 PM vmnet-bridge[897]: Dynamic store changed
    5/21/14 4:28:35.934 PM vmnet-bridge[897]: Failed to read SCproperties for key: State:/Network/Global/IPv4
    5/21/14 4:28:35.000 PM kernel[0]: vmnet: VMNetDisconnect called for port 0xffffff80472b8a00
    5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: filter detached
    5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: down
    5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: detached
    5/21/14 4:28:35.000 PM kernel[0]: vmnet: Freeing hub at 0xffffff8036465000.
    5/21/14 4:28:35.934 PM vmnet-bridge[897]: Stopping bridge for: en0
    5/21/14 4:28:35.941 PM netbiosd[14396]: network_reachability_changed : network is not reachable, netbiosd is shutting down
    5/21/14 4:28:35.974 PM WindowServer[86]: _CGXHWCaptureWindowList: No capable active display found.
    5/21/14 4:28:36.004 PM WindowServer[86]: _CGXHWCaptureWindowList: No capable active display found.
    5/21/14 4:28:36.000 PM kernel[0]: en0: 802.11d country code set to 'US'.
    5/21/14 4:28:36.000 PM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    5/21/14 4:28:36.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
    5/21/14 4:28:36.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
    5/21/14 4:28:37.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
    5/21/14 4:28:37.000 PM kernel[0]: hibernate image path: /var/vm/sleepimage
    5/21/14 4:28:37.000 PM kernel[0]: efi pagecount 63
    5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff825350a000, 0xffffff8253a1e000
    5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall time: 443 ms
    5/21/14 4:28:37.000 PM kernel[0]: pages 2941765, wire 533839, act 1370647, inact 20672, cleaned 0 spec 4060, zf 242088, throt 0, compr 217633, xpmapped 81119
    5/21/14 4:28:37.000 PM kernel[0]: could discard act 93909 inact 189335 purgeable 46214 spec 223368 cleaned 0
    5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall preflight pageCount 533839 est comp 46 setfile 1088506560 min 1073741824
    5/21/14 4:28:37.000 PM kernel[0]: VNOP_ALLOCATE(0) 14766080
    5/21/14 4:28:37.000 PM kernel[0]: [0x376c8fb000, 0x19000000]
    5/21/14 4:28:37.000 PM kernel[0]: [0x37bc8b4000, 0x27e15000]
    5/21/14 4:28:37.000 PM kernel[0]: [0x0, 0x0]
    5/21/14 4:28:37.000 PM kernel[0]: kern_open_file_for_direct_io(0) took 0 ms
    5/21/14 4:28:37.000 PM kernel[0]: Opened file /var/vm/sleepimage, size 1088507904, partition base 0x0, maxio 2000000 ssd 1
    5/21/14 4:28:37.000 PM kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 24 (rounded time weighted average 24)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 12 (rounded time weighted average 8)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 12 (rounded time weighted average 8)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 15 (rounded time weighted average 15)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 14 (rounded time weighted average 14)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 29 (rounded time weighted average 29)
    5/21/14 4:41:01.000 PM kernel[0]: vm_compressor_flush - starting
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 8 (rounded time weighted average 10)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 13 (rounded time weighted average 13)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 23 (rounded time weighted average 26)
    5/21/14 4:41:01.000 PM kernel[0]: pci pause: SDXC
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 3 (rounded time weighted average 5)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 8 (rounded time weighted average 10)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 17 (rounded time weighted average 19)
    5/21/14 4:41:01.000 PM kernel[0]: vm_compressor_flush completed - took 22525 msecs
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_flush_memory: buffer_cache_gc freed up 25099 wired pages
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_alloc_pages act 241315, inact 211360, anon 56665, throt 0, spec 227275, wire 533994, wireinit 172255
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_setup(0) took 55582 ms
    5/21/14 4:29:33.000 PM kernel[0]: AppleThunderboltNHIType2::waitForOk2Go2Sx - retries = 5
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff825350a000, 0xffffff8253a1e000
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown started
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown: wired_pages 539094, free_pages 3537922, active_pages 69141, inactive_pages 13763, speculative_pages 5, cleaned_pages 0, compressor_pages 57
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown_pmap_structs done: last_valid_compact_indx 443303
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown: mark_as_unneeded_pages 8192, 61390, 32867
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown completed - discarded 102449
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall time: 1108 ms
    5/21/14 4:41:01.000 PM kernel[0]: pages 1093183, wire 413176, act 69141, inact 13763, cleaned 0 spec 5, zf 0, throt 0, compr 57, xpmapped 82909
    5/21/14 4:41:01.000 PM kernel[0]: did discard act 131384 inact 192173 purgeable 46214 spec 227270 cleaned 0
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall found pageCount 496142
    5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
    5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen(0)
    5/21/14 4:41:01.000 PM kernel[0]: encryptStart 14010
    5/21/14 4:41:01.000 PM kernel[0]: bitmap_size 0x7f4e0, previewSize 0x0, writing 495805 pages @ 0x934f0
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild started
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild_pmap_structs done: last_valid_compact_indx 443303
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild completed - took 115 msecs
    5/21/14 4:41:01.000 PM kernel[0]: booter start at 1283 ms smc 0 ms, [14, 0, 0] total 1743 ms, dsply 392, 0 ms, tramp 1396 ms
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init: state 2, image pages 412973, sum was b3195d19, imageSize 0x3bbec000, image1Size 0x288e3000, conflictCount 7079, nextFree 1960
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
    5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen(0) 6 ms
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init reading
    5/21/14 4:41:01.000 PM kernel[0]: PMStats: Hibernate read took 659 ms
    5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init pagesDone 495939 sum2 3e9b893c, time: 659 ms, disk(0x20000) 470 Mb/s, comp bytes: 126795776 time: 113 ms 1061 Mb/s, crypt bytes: 321949696 time: 129 ms 2375 Mb/s
    5/21/14 4:41:01.000 PM kernel[0]: Wake reason: EC.LidOpen (User)
    5/21/14 4:41:01.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    5/21/14 4:41:01.000 PM kernel[0]: Previous Sleep Cause: 5
    5/21/14 4:41:01.000 PM kernel[0]: Previous Shutdown Cause: 0
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 0 (rounded time weighted average 0)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 0 (rounded time weighted average 0)
    5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 0 (rounded time weighted average 0)
    5/21/14 4:41:01.000 PM kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
    5/21/14 4:41:01.000 PM kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 6 milliseconds
    5/21/14 4:41:01.000 PM kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
    5/21/14 4:41:01.000 PM kernel[0]: TBT W (2): 0x0100 [x]
    5/21/14 4:41:01.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    5/21/14 4:41:01.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    5/21/14 4:41:01.772 PM loginwindow[63]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    5/21/14 4:41:01.798 PM mDNSResponder[60]:  71: Could not write data to clientPID[18](configd)  because of error - aborting connection
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  71: DNSServiceCreateConnection: 0 registered records, 14 kDNSServiceFlagsShareConnection operations PID[18](configd)
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 p03-streams.icloud.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 c2s.triu.com.webexconnect.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 1-courier.sandbox.push.apple.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 talk.l.google.com. PID[18]()
    5/21/14 4:41:01.807 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 1-courier.push.apple.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 p03-streams.icloud.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 c2s.triu.com.webexconnect.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 1-courier.sandbox.push.apple.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 talk.google.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
    5/21/14 4:41:01.808 PM mDNSResponder[60]:  ->  DNSServiceGetAddrInfo      v4v6 1-courier.push.apple.com. PID[18]()
    5/21/14 4:41:03.649 PM AddressBookSourceSync[16521]: -[ABAddressBook save] failed. (<ABAddressBook: 0x7fb19342b420>)
    5/21/14 4:41:03.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    5/21/14 4:41:03.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0131
    5/21/14 4:41:04.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    5/21/14 4:41:04.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0131
    5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xa000 ****
    5/21/14 4:41:04.000 PM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xa000 ****
    5/21/14 4:41:04.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xa000
    5/21/14 4:41:04.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x8a00 -- 0x0800 -- 0xa000 ****
    5/21/14 4:41:04.420 PM digest-service[16542]: label: default
    5/21/14 4:41:04.420 PM digest-service[16542]:           dbname: od:/Local/Default
    5/21/14 4:41:04.420 PM digest-service[16542]:           mkey_file: /var/db/krb5kdc/m-key
    5/21/14 4:41:04.420 PM digest-service[16542]:           acl_file: /var/db/krb5kdc/kadmind.acl
    5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xa000 ****
    5/21/14 4:41:04.508 PM digest-service[16542]: digest-request: uid=0
    5/21/14 4:41:04.706 PM digest-service[16542]: digest-request: netr probe 0
    5/21/14 4:41:04.707 PM digest-service[16542]: digest-request: init request
    5/21/14 4:41:04.710 PM digest-service[16542]: digest-request: init return domain: MACBOOKPRO-D6D5 server: AARONS-MACBOOK-PRO indomain was: <NULL>
    5/21/14 4:41:04.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    5/21/14 4:41:04.990 PM digest-service[16542]: digest-request: uid=0
    5/21/14 4:41:04.990 PM digest-service[16542]: digest-request: init request
    5/21/14 4:41:04.993 PM digest-service[16542]: digest-request: init return domain: MACBOOKPRO-D6D5 server: AARONS-MACBOOK-PRO indomain was: <NULL>
    5/21/14 4:41:07.462 PM eapolclient[14386]: en0 STOP
    5/21/14 4:41:08.939 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fbb0bf328b0 {NSUnderlyingError=0x7fbb0ef50540 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://longwa%[email protected]/calendar/dav/longwa%40gmail.com/user///longwa%[email protected]/calendar/dav/longwa%40gmail.com/user/, NSErrorFailingURLKey=https://longwa%[email protected]/calendar/dav/longwa%40gmail.com/user///longwa%[email protected]/calendar/dav/longwa%40gmail.com/user/, AccountName=Google, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    5/21/14 4:41:08.940 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Adding [<CalDAVAccountRefreshQueueableOperation: 0x7fbb09d5fef0; Sequence: 0>] to failed operations.]
    5/21/14 4:41:08.942 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fbb09e229d0 {NSUnderlyingError=0x7fbb09c27a70 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://longwa%[email protected]/90451300/principal///longwa%[email protected]/90451300/principal/, NSErrorFailingURLKey=https://longwa%[email protected]/90451300/principal///longwa%[email protected]/90451300/principal/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    5/21/14 4:41:08.947 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Adding [<CalDAVAccountRefreshQueueableOperation: 0x7fbb0b9a0ba0; Sequence: 0>] to failed operations.]
    5/21/14 4:41:09.327 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [iCloud]]
    5/21/14 4:41:09.330 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [Google]]
    5/21/14 4:41:10.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 90:84:0d:d6:3a:d2  MAC AUTH succeeded
    5/21/14 4:41:10.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    5/21/14 4:41:10.000 PM kernel[0]: AirPort: Link Up on en0
    5/21/14 4:41:10.000 PM kernel[0]: en0: BSSID changed to 90:84:0d:d6:3a:d2
    5/21/14 4:41:10.000 PM kernel[0]: AirPort: RSN handshake complete on en0
    5/21/14 4:41:11.083 PM vmnet-bridge[897]: Preferences changed called
    5/21/14 4:41:11.000 PM kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    5/21/14 4:41:11.547 PM airportd[82]: _doAutoJoin: Already associated to “silver_arrow”. Bailing on auto-join.
    5/21/14 4:41:16.518 PM configd[18]: network changed: DNS* Proxy
    5/21/14 4:41:16.523 PM UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en0: SSID 'silver_arrow' making interface primary (cache indicates network not captive)
    5/21/14 4:41:16.524 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Evaluating
    5/21/14 4:41:16.526 PM UserEventAgent[11]: Captive: en0: Not probing 'silver_arrow' (cache indicates not captive)
    5/21/14 4:41:16.526 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Authenticated
    5/21/14 4:41:16.528 PM configd[18]: network changed: v4(en0!:192.168.200.109) DNS+ Proxy+ SMB
    5/21/14 4:41:16.529 PM vmnet-bridge[897]: Dynamic store changed
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xffffff805131e000.
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetConnect: returning port 0xffffff805131e000
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: Hub 0 does not exist, allocating memory.
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: Allocated hub 0xffffff8031954000 for hubNum 0.
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f2:af:bd
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: Hub 0
    5/21/14 4:41:16.000 PM kernel[0]: vmnet:           Port 0
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: media 80 dev 0xffffff8030aa6558 family 2
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: wireless interface detected.
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: up
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: attached
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xffffff805131e000.
    5/21/14 4:41:16.547 PM vmnet-bridge[897]: Started bridge for 0, en0
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
    5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
    5/21/14 4:41:18.087 PM apsd[80]: Unrecognized leaf certificate
    5/21/14 4:41:19.254 PM ntpd[92]: ntpd: wake time set -0.423353 s
    5/21/14 4:41:19.267 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    5/21/14 4:41:19.270 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    5/21/14 4:41:19.654 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    5/21/14 4:41:20.239 PM Calendar[16019]: CoreData: warning: An NSManagedObjectContext delegate overrode fault handling behavior to silently delete the object with ID '0x60800020d810 <x-coredata://023D0C8A-A6F8-4E29-93C2-B88F12740C96/CalDAVError/p34>' and substitute nil/0 for all property values instead of throwing.
    5/21/14 4:41:20.240 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [Google]]
    5/21/14 4:41:22.799 PM com.apple.SecurityServer[14]: Session 100033 created
    5/21/14 4:41:45.000 PM kernel[0]: pci pause: SDXC
    5/21/14 4:41:46.000 PM kernel[0]: NVDA::setPowerState(0xe810a8351ab1fe07, 0 -> 2) timed out after 45415 ms
    5/21/14 4:42:17.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 00:1b:63:2a:e8:f3  MAC AUTH succeeded
    5/21/14 4:42:17.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    5/21/14 4:42:17.000 PM kernel[0]: AirPort: RSN handshake complete on en0
    5/21/14 4:42:17.000 PM kernel[0]: wl0: Roamed or switched channel, reason #1, bssid 00:1b:63:2a:e8:f3
    5/21/14 4:42:17.000 PM kernel[0]: en0: BSSID changed to 00:1b:63:2a:e8:f3
    5/21/14 4:42:20.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 00:1b:63:2a:e8:f3  MAC AUTH succeeded
    5/21/14 4:42:20.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    5/21/14 4:42:20.000 PM kernel[0]: AirPort: RSN handshake complete on en0
    5/21/14 4:42:20.000 PM kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 00:1b:63:2a:e8:f3
    5/21/14 4:42:20.000 PM kernel[0]: en0: BSSID changed to 00:1b:63:2a:e8:f3
    5/21/14 4:43:50.000 PM bootlog[0]: BOOT_TIME 1400705030 0

    Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
    So my power settings look like this:
    Currently in use:
    standbydelay         4200
    standby              1
    halfdim              1
    hibernatefile        /var/vm/sleepimage
    darkwakes            0
    gpuswitch            2
    disksleep            10
    sleep                10
    autopoweroffdelay    14400
    hibernatemode        0
    autopoweroff         1
    ttyskeepawake        1
    displaysleep         2
    acwake               0
    lidwake              1
    standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does.

  • I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    Hi rdfnra,
    Please check the Page Display preferences (File > Preferences/Acrobat > Preferences) and make sure that Show Large Images is selected. If sounds as though this PDF may have been created from a scanned document, and this preference is disabled.
    Please let us know how it goes.
    Best,
    Sara

  • 17" studio display turns black

    Hello,
    My 17" Studio Display turns black after I change my display-resolution.
    It wont change when I restart the computer.
    I can only startup in the save mode(holding the shift key at startup).
    It had problems before when I tried to start a game(zoo tycoon).
    The display whent also black, but restored after a forced restart.
    Does anybody know some advice?
    Marc

    You sound as though you have a similar problem that I am experiencing. I also have a Studio Display (Graphite Clear)
    I was trying to connect my powerbook to a second display which is my old graphite CRT model. After hours trying to resolve the same problem, with my powerbook giving every indication that it was connected and operational, but I was still not getting an image on the CRT screen.
    Eventually I discovered one small footnote on a Cinema Display help forum which said that the ADC to DVI adapter is not compatible with CRT monitors.
    No mention of this is made anywhere on the ADC DVI adapter spec.

  • HT201401 last night my iphone screen all of a sudden was solid blue and now it is black. I put it on the charger and this morning it is totally black.  However, I did hear the text message signal go off. When I turned the volume on and off a big white bel

    Last night my iphone screen all of a sudden was solid blue and now it is black. I tried turning it on and off.  Still nothing appeared on the screen.  I put it on the charger and this morning it is totally black.  However, when I hit the on and off button, I did hear the text message signal go off. When I turned the volume on and off a big white bell flashed.  In the last week, there were some other display problems such as the screen blowing up large. The only way to fix it was to turn off the phone and then turn it back on. 
    What does all of this mean? It seems like I've had these problems since the iphone 4 upgrade.

    just do reset, press home button and power butoon for a while untill you can see apple
    gud luck

  • My Ipad 2 no longer displays anything.It may come on for a few seconds,but then half of the screen goes completely black, and the system becomes non responsive to all bottons. At other times all four sides of the display becomes black, about 1/4 inch.

    Can anyone help me on this one? I got my IPAD 2 in June 2011. It never gave problems until a few days ago. It began to "hang", becoming non-responsive to all buttons. Then just yesterday morning, it went totally black. The display no longer displays. The Battery was charged 96%. I tried the power adapter, but had the same result. I tried the resetting, holding the two buttons for 10 seconds or more but no result. I have already restored it to the factory setting,(via my PC) and put back my apps etc. But after all this I still cannot see anything on the screen.
    I know it is still working, because from time to timer I hear the message alerts, and other sounds.
    Waht is the likely solution?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • 2011 MBP display went black

    My 15" MBP was bought last month.
    I started up my MBP this morning I heard the machine running sound and saw the power light turned on.
    However, the screen was totally black till loaded to the login page.
    I forced to shut down by pressing the power button.
    The screen didn't show anything for the 2nd and 3rd trial.
    Finally succeeded in 4th time...
    What's wrong with my MBP? is it the display problem?

    Perform a SMC reset
    https://support.apple.com/kb/HT3964
    Did you apply the recent EFI firmware update? See this and hopefully you can restore your firmware back to original conditions.
    https://support.apple.com/kb/HT2213
    With the latest EFI update Apple installed a Lion Internet Recovery,
    Lion boot DVD copies here (option click on Purcahes in MAS to download Lion installer again)
    http://eggfreckles.net/notes/burning-a-lion-boot-disc/

  • Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

    Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
    I have followed each of the steps listed in the link above with no success.
    Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the  Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
    Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
    Any feedback would be greatly appreciated.
    <cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    iMac (27-inch, Late 2009)
    2.66 GHz Intel Core i5
    16 GB 1067 MHz DDR3
    ATI Radeon HD 4850 512 MB

    Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
    W7- Ultimate
    W7- Professional
    W7- Home Premium
    W7- Home Basic
    WIM Files
    File1
    y
    y
    y
    y
    File2
    y
    y
    y
    y
    File3
    y
    File4
    y
    y
    File4
    y
    y
    y
    The File .wim will contains a compressed image which contains File [1...5].
    The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
    The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
    The W7-Home Premium  .clg will have 5 entries, with 'Y','Y','N','N','Y'.
    The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
    This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
    The following line
    <cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk).  You can test if it will work for you by changing this line to the following
    <cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
    D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

  • PDF Documents suddenly display as black only

    Earlier this year I suddenly had numerous PDF documents start displaying completely black, making it impossible to read the text. Sometimes images appear as ghosted white outlines, but most commonly the whole document is simply a black blob. I can open the same file using a free PDF Reader, but the moment I try opening it in Adobe Acrobat Reader Pro it appears in black again. I've tried uninstalling and reinstalling version 9.2, and have now updated to 9.5, but am still getting the same error.
    I have no idea of where else to look to find a solution. Any guidance would be greatly appreciated.
    Regards
    Jurgen

    This sounds sort of like a display problem. Are the preferences that you have set under Edit > Preferences > Page Display category in the Rendering area any different in Reader than they are in Acrobat Pro? Also in the same Preference category make sure you have Use Overprint Preview set to Never.
    Also you can try checking under the Edit > Preferences > Accessibility category to make sure some of these setting haven't been inadvertently set.
    Message was edited by: LoriAUC

Maybe you are looking for

  • Flash Player 12.0.0.77 Issue

    I'm running Windows 7 Home Premium, IE 11.0.9600.1621, Flash Player 12.0.0.77.  When I run a video of say, Yahoo, I get sound but not picture.  I've tried online suggestions such as enabling the Shockwave Flash Object.  Nothing has worked.  Any sugge

  • Your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up

    Hello, Yesterday my macbook pro was working fine and i left it before sleeping working and it's go into slepping mode after battery discharged. today morning i turned it on and i got this message after many times of automatic restart : " Your compute

  • ******* AnyOne who can answer my question  very very urgent **********

    hi Iam new to swing programming.i have a JTable which has a column for date.i want to validate the date.if the date is invalid it should clear the cell and the focus should remain in the same cell.how to achieve this.any ideas. tks in advance

  • How to get the selected value in SelectOneMenu in backing bean

    Hello all, I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select men

  • Weblogic 10.3.5 cannot start

    Hello, I am trying to run an install of Oracle weblogic with SOA suit and Jdeveloper. Platform is Windows 2008R2 64bit JDK version 1.6_24 weblogic 10.3.5 (jdevstudio 11117 printed an error stating it wants version older than 10.3.6 - I need the LDAP