20" Aluminum Cinema Display Screws?

Hello. I'm looking for two of the allen wrench screws that attach the 20" Aluminum Cinema Display Monitor to the stand. I just ordered a replacement stand but the screws were not included! Any assistance will be greatly appreciated.
G5 Mac OS X (10.4.4)
G5   Mac OS X (10.4.4)  

An aluminum 20" ACD will have a DVI input with a tethered cable. If you are sure the Mac Pro has a full-sized DVI output, then it should all be good. No adapter needed.

Similar Messages

  • 20'' Aluminum Cinema Display Question

    Hello... I have the short long short blinking, i'm running a 65watt power adapter with my 20'' aluminum screen.  It was just working a month ago, any idea what happened?

    If it's your only display, you don't need any adapter. The Mac Pro graphics card has a DVI port.

  • I'm trying to connect my 23" Cinema display to my iMac, need help with connector cable.

    I'm trying to connect my 23" Cinema Display monitor to my iMac. The adaptor cable I ordered came with a female, I need a male adaptor. Any ideas where I might find one? I purchased the BlueRigger Mini Displayport Male to DVI Female Adapter Cable.

    I have the 23" aluminum Cinema Display. I just can't seem to find the right adaptor for the monitor femal plug on the backside. I've tried a Bluerigger but it was a female adaptor. I believe I need a male.

  • Problem connecting a 24" Cinema Display to an Imac 27"

    My friend has an Imac 27 "with a graphics card AMD HD 6970M 1GB. She wanted to connect an external Cinema Display 24" (without thunderbolt serie). The external display has started to display black screen intermittently while making a strange noise. Before this screen, there was a aluminum  Cinema Display 20 " which never had any problem. The 24" Cinema Display was just before used as external screen for a Mac Book Pro 15" (main screen, no dual screen) without problem too.  Any idea? Is the card too weak for such a configuration?The iMac was purchased on October 15th on the refurb. The Os is Lion 10.7.2.

    If the computer doesn't have a Mini DIsplayPort or DisplayPort, not until September; click here for more information. If you mean the MagSafe connector, leave it unplugged; it's only for laptops.
    (46688)

  • 30-inch cinema display & Power Mac G4 Mirror Door

    Does anyone know if it's possible to set up a Power Mac G4 to run a 30-inch aluminum cinema display? I have a G4 running a 22" apple display (clear enclosure) and want to purchase another desktop to run the 30-inch display without spending a fortune. I had it running on a G5 (June 2004) M9457LL/A but that just died, (logic board failure).
    Philip

    That monitor will work with a computer that has a DVI port, but you need this card to get a dual-link DVI port which is required to use it at its full capacity.
    (42833)

  • Horizontal line across 23" Cinema Display

    Hi
    I am using a friend's display, and it has an annoying horizontal 1 pixel line across the screen about 40% of the way down from the top. This is the 23" aluminum Cinema Display with the external power brick and DVI connector. The pixels appear to be about 50% gray, but the color changes a little (to a dark gray) depending on the surrounding image being displayed.
    Any thoughts about what might be causing this and if there might be an inexpensive fix? (FWIW, I know it is in the screen since it does the same thing w/ various laptops plugged in.)
    TIA
    A

    I had that happen on my 30" ACD. I believe it was caused by a power surge, but could've been just crappy manufacturing. Suffice to say I had display replaced (luckily it happened during the first 30 days).
    I hope you have AppleCare for your display so that it can get replaced/fixed.

  • Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

    Hello there
    I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
    i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
    why is it not working...

    have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

  • Cinema Display 23 aluminum and Windows 7 64

    I have an Apple Cinema Display on an Alienware Auora i7 980x running Windows 7 64. I have an nVidia Quadro 4000. In the nVidia Control panel the monitor shows, but not in device manager. One of my monitors shows up in Device Manager, but not in the nVidia control panel. I tried installing the WinACD version 0.4.6 but get the mesage that the "installation was interupted"
    I have two Dell monitors that show up in Device Manager, but one is missing from the nVidia control panel. Although the Apple Cinema Display does show up in the nVidia Control Panel, it is not sown in Device Manager
    I have contacted nVidia, but was hoping to find out if there is a driver for the Apple Cinema Display.
    Any ideas?

    Hello again,
    After speaking to an Apple Genius, it seems the solution was to update the firmware for the Cinema Display. Since I have done this, the monitor appears to behave better.

  • Aluminum 23" vs. translucent 23" Cinema Display

    Is there any difference, other than cosmetics between the current cinema displays with the metal casing and the previous versions with the translucent case? I was thinking of upgrading to a 23" monitor and just think the previous version is better looking.

    Agree, quality is better on older plastic one. I have the 20" and auditioned the new 20" and 23" and decided not to bother.
    Try and display a 1,2,3,4,5% tint on both and you will see the plastic goes almost down to 2% the new displays struggle around 4%... very bad if you ask me.
    R

  • How to connect my Cinema Display as a second monitor

    I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
    Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
    Or can you not have a second monitor with an iMac?
    Thanks in advance.

    Hi Cathy,
    What connector is on that Cinema? ADC, VGA, or DVI?
    Video Card:
    GeForce GTX 675MX
    VRAM Type:
    GDDR5
    Details:
    This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
    Standard VRAM:
    1 GB
    Maximum VRAM:
    1 GB*
    Built-in Display:
    27" 16:9 Widescreen
    Native Resolution:
    2560x1440
    Details:
    This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2)
    Details:
    *This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
    http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

  • Where and how can I buy a new AC adaptor for a 30" HD cinema display?

    I bought large numbers of Apple products in Hong Kong but have since moved to a remote area of the Philippines where internation telephone calls are extremely difficult.
    The AC adaptor of my 30" HD cinema display with aluminum case has been lost so I need to find out the price and order a new one.  However the Apple shop (Hong Kong) on-line has no way to ask the price or place an order for this item.  There is no on-line form no email addrees, nothing except Hong Kong phone numbers.
    Can anyone please advise what I can do?  Please don't suggest going to the local service center.  I will never go back to our local service center after what they did last time.
    Thank you.
    Frank

    Thank You.
    I have emailed them to ask if they will deliver to Hong Kong via USPS.
    I may need a video card for a MacPro so I will order that from them also.
    Thanks again
    Frank

  • Mid-2012 MBP with 27" Cinema Display SCREEN GOES BLACK WHEN USING USB PERIPHERALS IN DOCK

    I haven't been able to find any straightforward answer as to why this is happening and it's becoming one of the most infuriating things in my life, impeding my workflow and costing me unmeasurable time in waiting, rebooting, screwing with cables, etc.
    I use my MBP as a DAW for multitracking live audio events to ProTools through a digital console where I work. Here's my gear list that I use every day:
    Mid-2012 MBP - Yosemite, 8GB, i7 quad 2.5, mechanical hd
    HengeDocks dock for my exact model machine - has set-screw jacks for CinemaDisplay power, Tbolt, FW800, USB, USB, SDcard, headphones, etc
    USB wired keyboard
    Anker 1x4 USB3.0 hub - I have a TimeMachine 1TB drive, 3TB project backup drive, audio interface and MIDI I/O or PT iLok, depending what I'm working on
    Magic Mouse (BlueTooth)
    Here's what's happening:
    SCENARIO 1 - I insert the CinemaDisplay (cD) power connector and TBolt plugs into the dock, tighten the set screws, close the lid of my MBP (already logged into Yosemite & linked with MagicMouse [mM]) and stick the MBP into the dock... everything comes up on the cD and I can go about my day. At this point, I can plug the USB hub into the back of the cD and the system sees the hub & all peripherals listed just fine.
    SCENARIO 2 - Install cD powercon, TBolt connector, USB3 hub, USB keyboard into the dock, close the lid on MBP (again, logged in), insert into dock... cD comes up, looks great for about 15 seconds then goes completely blank. No response from key presses, mouse clicks, threats with a hammer, etc. Then, of course, I have to yank the MBP out of the dock, which hard-disconnects the external drives (backup and TimeMachine... good for them, right?) and causes the MBP to flake, thinking it's still in the dock, then not, then logging me out & requiring a password (not a big deal- I deal with copyrighted stuff, so passwords aren't the issue).
    ***EVEN IF I DO NOT PLUG THE USB3 HUB INTO THE HENGE DOCK, THE cD STILL GOES BLANK AFTER 15 SEC... IT ONLY SEEMS TO LIKE THE TBOLT AND POWER... NO OTHER PERIPHERALS (fw800, USB, etc)***
    It seems like the MBP freaks out when the lid is closed and there are USB/FW peripherals plugged in while using a secondary TBolt display as the main output... seems stupid... if I need a closed-lid dock, the MBP shouldn't care what I have plugged in while the lid is closed. I had the same issues with Mountain Lion & Mavericks and now it's being repeated with Yosemite.
    My goal in this exercise is simply to free up the USB jacks on the back of the cD for two reasons - #1) from time to time, I have extra things to plug in and I don't want some massive USB 1x8 hub on my desk... looks stupid; #2) the bottleneck created by plugging in the hub to the back of the cD (another hub via TBolt) almost triples the time required to back up/copy files. I move files from system drive to backup drive & back VERY often due to the nature of my job... speeding up this process would greatly improve my efficiency in the matter. Why would Henge create a dock with all the jacks on it to allow someone to plug into a cD that won't frickin work with said cD? Every other dock I've found makes the user stick the MBP on a slanted, goofy-looking stand and have the lid open or something dumb like that... what I have is the setup I need... just need the USB stuff to work while lid is closed and everything from powercon & cD to USB3 hubs will work without making the cD freak out.
    Any ideas out there?

    Have now taken the 27" display into the repair shop and after 24 hrs got the phone call - "appears to be nothing wrong with it, will check again on Tuesday and let you know".
    I can't seem to find anything on the net describing a similar problem. Everything is working fine right now with the Mac Pro connected to the older 20 inch Cinema Display. In fact, everything seems to be working about a second faster.
    I was told by the local retailer that Apple no longer makes the 27 inch LED Cinema Display product and the new display, the "Thunderbolt" will not work with my 13 month old Mac Pro.
    ***??? In 20 years of owning Mac equipment, this is my first major "uh-oh".

  • Problem with tilt of 30" Cinema Display

    I have an Apple Cinema Display 30" which works just fine and I had it just slightly tilted up but I had to move it back and now it's stuck and I can't move it back to that slightly frontward tilt. I notice there is a little screw-- I just had the display fixed by Apple [the inside lights were fixed] and don't want to hassle taking it back to Apple store or sending it out....does anyone know if it would be a fairly simple thing to unscrew that and move the display or is there something there that I should be concerned about?

    Being HDMI it should really only offer options that are supported by your connection and the issue of a mismatched output shouldn't occur, however since your monitor isn't really HDMI I can't be sure what will happen.
    When using component the tv offers all resolutions supported by itself regardless of whether the tv supports them and of course when they don't match the tv is blank. I think it may be possible that this is what happens when HDMI is connected to DVI. I really can't be sure but I think this is worth testing for.
    In component mode if you select a video mode that isn't supported the screen will go blank and if you leave it a while the tv will reset to the last output you were using.
    When you change video mode it can take a few moments for the change to take effect, so don't be too impatient when cycling through the options.
    Finally, just a thought, your gender changer does support DVI-D/DVI-I and not just DVI-A doesn't it.

  • Can I use an Apple Cinema Display as a second monitor for my iMac?

    I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?

    Just had a good look inside my box and nothing. Maybe it's a Apple UK thing
    The back of my iMac does have a Mini DVI port so I'm gonna pop down the Apple store tomorrow morning to pick one up.
    Thanks for the advice, I'll let you know if I'm successful.
    Message was edited by: genpro

  • Taking my 20" Cinema display on the road; how do I remove the stand?

    Hi everyone,
    I'm planning to do alot of work on location this summer and would like to find a way to remove the stand attached to my 20" LCD Cinema Display so that I can pack them both into a smaller case. I've just removed the allen key cover on the right hand side (from the front) and was presented with a more complicated challenge inside the mount. It seemed to me to be a good time to consult the support forum before things went horribly wrong....
    Are there instructions anywhere that show how to dissasemble the hinge where the display meets the stand? Without destroying either?
    Can anyone recommend a lie-flat/two piece stand I can take with me on location?
    Many thanks,
    Andrew

    Look at me; I'm clever.
    Solution found at http://manuals.info.apple.com/en_US/073-0933.pdf
    After removing the two screws, the stand didn't want to pull off easily and I thought it may still be attached. It turns out that the attachment point was just sticky and needed a firm pull.
    Thanks internet!

Maybe you are looking for