-20 error while restoring from backup

I am getting resotre faile (-20) error message while restoring the ipad from itunes, after upgrading to ios5. does anybody know what this message is and how to resolve

Cryslex wrote:
Thanks for the advice but I tried to reboot my computer from the osx disk and it said I could not run it off of the hard drive selected.
No, since it's not a complete system, it's not going to start.
You mentioned I had to erase the hd first but I don't know how to do that.
If you replaced your HD because of a problem with it, your best bet might be to try the full restore again, but select an earlier backup.
But if you want to erase your internal HD and install OSX, see the yellow box in #1 of Using Disk Utility.
Then see the REINSTALLING OSX section in the box for the version of OSX you're running in Installing the ''combo'' update and/or Reinstalling OSX.
Then you'll have two choices:
When your Mac restarts after installing OSX, you'll have the chance to transfer your data from the most recent backup. See either Using Setup Assistant on Lion or Using Setup Assistant on Snow Leopard or Leopard for detailed instructions.
Or, skip Setup Assistant and create a user account. When your Mac restarts again, use that account to reapair the backups, per #A5 in Time Machine - Troubleshooting. I suspect that's your best option, since it sounds like the backups are damaged.
If they can be repaired, you should be able to do the full restore. Or, you can use Migration Assistant, but that will result in an extra user account and the transferred accounts may lose permission to the backups. See Problems after using Migration Assistant for an explanation and some workarounds.
If they can't be repaired, most likely you can still restore selected items, via the "Star Wars" display, per Time Machine - Frequently Asked Question #15.

Similar Messages

Why am getting a "error occurred while restoring from backup" message when restoring using Time Machine?

Hello
I recently made a Bootcamp partition with Windows 7 (which incidentally went absolutely fine). In that partition I wanted to split it for some certain files, but on doing so I appear to have completely tanked my hard drive - I've pretty much wiped the entire thing. I read afterwards that creating new partitions within Windows is a big no no Bootcamp wise, and this wasn't something I knew about before. Lesson learnt!
Either way, I had a backup and though it would be simple enough to restore from that backup, but about 2% in it it pops up "an error has occurred while restoring from backup, please restart and try again". After a few tries, this didn't work, so now I'm worried that my backup is corrupt.
I'm not sure why the backup would be corrupt as this was made with no problems as normal.
I've already tried the standard restore with no success (obviously), and I've also tried re-installing the OS up to the first boot, then trying to restore (thinking that the error was a result of a missing Recovery HD, which the re-install would create) and this was with no success also.
My final idea was to just erase the drive and re-install the OSX, and then when it prompts me, restore the files from the Time Capsule.
Am I onto the right idea, or is there another way around this? I'm just very worried that my backup has become corrupted for some reason and I've lost everything on there.
Specs are:
MacBook Pro Mid 2012 OS X 10.8.5;
Bootcamp 5 (Windows 7);

I'd agree. As long as you've gone this far, I'd probably start from scratch with your MBP, back up any critical files on it, wipe the whole thing, and do a nice clean reinstall.
I'd try to repair the backup drive with disk utilty and then see if you can restore the minimum of essential documents from it to the MBP. If Disk Utility can't fix it there is a small chance that a third party utility like diskwarrior or techtool could repair it. DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
If you can get your essential documents off the backup drive, then I'd wipe it and put a new time machine backup on it. If that doesn't work, then I'd replace the drive.

File System error while restoring a backup from analysis server to another

Hi
I have restored an analysis database backup to from server 1 (sql server 2008) to server 2(sql 2008) and its working fine
and now am trying to restore another database from analysis server server 3 (sql 2005) to server 2 (sql 2008 )but its giving error that
File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

Hi Maverick,
According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
step, please refer to the link below.
http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
Regards,
Charlie Liao
TechNet Community Support

Error while restoring the backup

HI,
We have taken the offline backup through BRtools but we have used rman to take the backup in init.SID.sap. We have succeeded in taking the backup of the database and it has saved in .S format. Now when we are restoring with Brrestore it is giving the below error. Can any one suggest how to restore the backup.
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=143 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data5.S recid=1314 stamp=735914182
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=143 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_5/xid.data5
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_5/xid.data5 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0278E Command output of 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Nov 29 07:24:00 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=141 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data4.S recid=1307 stamp=735914046
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=141 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_4/xid.data4
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_4/xid.data4 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_1/xid.data1 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_2/xid.data2 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata4/xiddb_3/xiddb.data3 from /archive/offLine/xid/beeqftcz failed due to previous errors
Regards,
Manikanth.

Is your backup got completed succesfully?

Will texts received while restoring from backup still come through?

I just updated my phone, and then proceeded to restore from my backup which took a good 20 minutes. If someone texted me during that period, will I still recieve it? The backup restored everything to right before my update, could that mean any text I recieved during the process dissapeared?

Hi, you need to delete those corrupt backups and make another, if your data is still safely on the phone. The next time you will really need a backup to restore from, those corrupt ones will be impossible to work with, your only option being data extraction if possible or start from scratch. If you're just looking for a way to delete the old spotlight messages, try this:
- On the Homescreen, go to "Settings" > "General" > "Spotlight Search"
- Tap each item in the "Spotlight Search" screen to uncheck it (remove the checkmarks), including contacts, apps, music and event and this will remove them, leaving only the search box there for future searches. Then press Home and return to your homescreen.

Error -69 restoring from backup cd

I am attempting to restore about 25 purchased song to my laptop in which i plan to use w/ my ipod. I stick the backup disk in and itunes asks if i wish to restore and then it will always stop at song 10 and ask for the next cd followed my the error " Attempting to copy the disk "FAAMAAB2" failed An unknown erro occured (-69). Then is shows that only 9 song are in my library.I suspect the cd is good becuase I played song 10 from the cd via itunes.
Any assistance appreciated

I am having the same problem. Here are some more details from my situation, which will hopefully help:
I Used the "Backup to Disc" feature from iTunes 8. That created 4 DVDs. I formatted the same computer that the backup was done on, and then installed iTunes 8.1. When I put the DVDs in, nothing happens. I can't see anything on the discs in the finder.
This version of iTunes imports other DVDs and CDs fine as iTunes should.
But when I got to a different computer, the restore starts as it should from iTunes 8.1. Still can't see any images on the disc. (I am not looking to restore the that computer and re-backup -- too many complications with that scenario.)

"An error occurred while restoring from the backup.Files can't be restored"

My 4 month old MacBook Pro 15" running 10.6.2 lobotomized itself and I had to have a new HD put in it. I backed up the old one w/ TM on an external HD. I've tried (by the book, and with direct verbal guidance from the Help People at Apple) to restore the system and files but every time it gets to 10.2% in the restoration process and then I get this message: "An error occurred while restoring from the backup. Please restart." and under the frozen progress bar is the chilling line: "Files can't be restored." I've tried restoring from several dates on the TM backup list but it always stops at 10.2% completion. Help!

Hi.
Start by booting from your SL install disc, and selecting Utilities from the menubar, but before going on to +Restore System from Backups,+ instead select +Disk Utility.+
Make +*absolutely certain+* that your internal HD has the GUID *Partition Map Scheme* and the +Mac OS Extended (Journaled)+ Format (unless you're sure it should be +Mac OS Extended (Case-sensitive, journaled).+
Then do a +*Repair Disk+* (not permissions) on your Time Machine drive.
If that succeeds, quit Disk Utility, then continue with the full restore (per #14 in the FAQ).
But if that finds errors it can't fix, it's possible that +Disk Warrior+ can fix them. It's about $100, and is probably a good long-term investment, but there's no guarantee.
If all else fails, go back to Disk Utility and erase your internal HD, then install OSX. When your Mac restarts, use +Setup Assistant+ to transfer your users, apps, settings, and data from your backups (see #19 in the FAQ).
Then download and instal the "combo" update to get back to 10.6.2. Info and download available at: http://support.apple.com/kb/DL959 (or http://support.apple.com/kb/DL1017 for 10.6.3).
Be sure to do a +Repair Permissions+ via Disk Utility afterwards.

Error occurred while restoring from the TimeMachine backup

I have an brand new HD that I want to restore from TimeMachine.
Erased and partitioned this brand new drive. Created 2 partitions and formatted as “OS Extended Journaled/ GUID.”
Did a “Command R recovery boot” and went through the steps to backup from TM to my new HD.
         15 seconds into the restoration process Msg. reads:
“Error occurred while restoring from the backup.
Restart your computer and then try restoring again.”
Trouble shooting:
Luckily my original files and initial boot drive that TM was backing up from remains fine and I performed some more TM back ups as well as a TM backup onto another drive as well.
I even tried restoring to another empty drive with older backups and backups off of another HD and got the same error message.
All my BU’s and BU attempts have been within 10.7.3 on the same MP.
Thank you in advance for any help!!

These are the four hard drives I am using for troubleshooting:
1. Internal new 1TB drive
2. External erased and reformatted 500GB firewire drive
3. Internal original 500GB drive designated for TimeMachine with
~200Gigs of successful backup (Including entire bootdrive)
4. External erased and reformatted 300GB drive that I told
TimeMachine to back up to for testing purposes.
I have only erased and reformatted the first 2 empty drives to use as a future boot drive once I can finally restore from my TimeMachine files to one of them successfully.
My troubles all started when I couldn’t get my cpu to boot from my initial boot drive. That’s what has put me on this track. I have since repaired that boot drive with DiskWarrior to perfect order.
Through a lot of my trouble shooting, I have left that initial boot drive in but have since taken it out. I don’t have lion installed on any other drive. Again, my 2 test drives are empty.
I don’t know how long this old boot drive will remain in perfect order and am glad I have found that I cant use TimeMachine on this side of needing it desperately.
Pondini- Thank you again for hangin' in there with me. I think I understand your last recommendation:
         Do I load a new copy of Lion from this location?:
http://itunes.apple.com/us/app/os-x-lion/id444303913?mt=12&ls=1
The suggestion of “coping the installer” is to have a hard copy like I used to in SnowLeopard etc. for a faster future install?

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

Error , ORA-19809 & ORA-19804 While restoring RMAN backup .

Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AM

Hi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

Error when trying to restore from backup

I just received an iPod replacement and when I go to restore from backup it gives me an error. The photos are restored but no music or video. Any suggestions? Thanks

lllaass wrote:
If they are not in the iTunes library they can be synced to the iPod.
They CANNOT be synced to the iPod.
B-rock

Error code: 16 when restoring from backup file

I've just restored my macbook pro and tried to restore from backup Photoshop file, now I get the code Error: 16. Does anyone know how to fix this problem? Thank you!
Roferr

Open the Terminal.app
Copy and paste: sudo chmod -R 777 /Library/Application\ Support/Adobe
Press Enter and supply your password if asked.
If that does not work, do a reinstall from the discs or installer.
Migrating Adobe programs from another Mac or restoring from Time Machine breaks the licensing.
Gene

I have an iphone 3GS and I tried to upgrade the software, After it finished I tried to restore from backup and even though the itunes says there was a backup, After trying it comes up with error there was no backup to retrieve from. Can I get it back

After updating my iphone 3GS I tried to restore from backup and after choosing the backup and syncing, it keeps coming up with error there wasn't any backup to restore from. Can I get it back or have I lost all my info ?

See if these Articles help resolve your issue,
Troubleshooting Backup Issues
http://support.apple.com/kb/ts2529
http://support.apple.com/kb/HT4946

-20 error while restoring from backup

Similar Messages

Maybe you are looking for