20" iMac g4 won't boot after installing airport extreme card

http://docs.info.apple.com/article.html?artnum=26237
This document shows a card that looks different from my card. The antenna is in the center in the picture and my card has the antenna to the side. The card seem a little smaller than the slot but it does go in and seats ok.
Do I need an old style card? I can't find anything but the Airport Extreme card in the apple store.
Thanks,
Larry

Hi!
...yes, the 20" iMac G4 takes the original Apple Airport card (not extreme)
you can get a decent one + Warranty here...
http://eshop.macsales.com/item/Apple/M7600LLE/

Similar Messages

PowerMac G4 (FW 800) Won't Start After Installing Airport Extreme Card!

After installing an Airport Extreme Card in my G4 FW 800, the computer will not Chime or Start Up; shortly thereafter, the Fan begins to Run erratically.
Without the Airport Card installed, the CPU runs normal, with the exception of the clock needing to be reset.
Any help is Greatly Appreciated! -Nico

Hey Tom, thanks for the response. I have tried holding Command-Option-R-P down (resetting the PRAM) at startup with no avail. I have also pressed the PMU button with and without the Airport Card installed. Still no luck. I am pretty stumped. I ran a hardware check on the machine, and it has come back successful without the card.
The previous owner installed an extra internal HD and some memory. I have since installed a new PCI graphics card. Do you think these have anything to do with it?

Imac 24 won't sleep after installing Airport Extreme

Hi there.
This topic may have been covered already, but does anyone know why I can't seem to get either my Imac 24 display or the internal HD to automatically sleep after installing the Airport Extreme .11n?
Both the display and internal HD would sleep just fine when directly connected to modem, but now with Airport Extreme, only the screen saver appears and I can't get either the display or drive to sleep.
Thanks
Imac 24 Mac OS X (10.4.9)

Hmm, check your settings for sleeping.
Try Apple Web Chat
http://www.apple.com/support/chat

HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

Hi David,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Tried resetting the PMU for PB/iB?
http://docs.info.apple.com/article.html?artnum=14449

IBook G4 won't start up after installing Airport Extreme card

Hi,
just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
When I remove the card the iBook starts up normally.
Any thoughts what could be wrong? Bad card? Bad connection?
Thanks a lot

Sven, Welcome to the discussion area!
Are you certain that you have an AirPort Extreme card?
Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
If both of those are OK, then one (or more) of these is true:
The card isn't installed correctly.
The AirPort Extreme card is defective.
The iBook's motherboard is defective.

Cannot boot after installing airport extreme

I tried to install my new airport extreme card on my powerbook G4 (at the back, as described in the instructions). the software had been installed before. when i tried to boot my computer (re-start), it did not boot, but showed a funny message:
Apple Powerbook 6, 1 4.5.f4 Boot ROM built on 01/14/03
Welcome to Open FOrmware, the system time and date (...)
The battery capacity (...)
To continue booting, type "mac-boot" and press return
To shut down, type "shut-down"and press return.
please help, i don't know what to do next and am afraid of loosing all my data.

See "To continue booting, type 'mac-boot' and press return" Message
No matter what happens, you won't lose your data.

Blank screen on my eMac after installing Airport Extreme Card

I just bought and installed (the right way, I checked) the Airport Extreme card on my eMac G4 desktop and at first the computer couldn't find it at all and after restarting several times, now the computer turns on but the screen is absolutely blank. I took the card out and restarted and it came on just fine. Can the card be affecting the screen? ANy help appreciated, I have no idea on this one.

This symptom is commonly seen when the Airport card is not FULLY seated into its socket. It can take a fair bit of force to do this.

Cannot turn on my iBook after installing airport extreme card

I have an older iBook that's running OSX 10.4.3 I am trying to install an airport extreme card, but I am unable to turn the computer on after installing it. What's the deal?

you have an ibook G3?? if so, then you need the old "Airport Card", which apple no longer makes and you'll have to get from macmall or macwireless.com
iBook G4 Mac OS X (10.4.2)

Won't boot after installing new video card

Hello, I have a H8-1284 desktop computer, and a few days ago the video card went. So i bought a Geforce GTX 650 video card, and after installing the card and starting the comp, it just hangs at the HP logo splash screen. So I put an older geforce 8800, and it boots no problem. When I try the new Geforce GTX 650 card, same thing, just hangs at splash screen. I checked the bios and there doent seem to be anything there that wouild help. My power supply is 460 w, and the new card only needs 400 w, any and all help will be greatly appreciated
This question was solved.
View Solution.

Hi,
Most PCI-E 3.0 cards are backwards compatible with PCI-E 2.0 slots. However, in order to get PCI-E version 3 you need to be using an Ivy Bridge processor. Review these specifications for a typical NVIDIA GTX 650.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

IMac G4 won't boot after install of iTunes latest update

I just updated my iTunes software via download. I have the iMac configured to ID when new updates are available. After download I selected the "restart" option. Computer shut off and upon power up will not proceed past blue start up screen with the progress bar and "starting MAC OSX...." text. I have tried power down/power up. It has been at least an hour and still on blue screen. I have never had a problem in 5 years. Any ideas?

Hi Dean, and a warm welcome to the forums!
Unbeknownst to you, you had problems on your HD before the update.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

After installing airport extreme, can't recieve mail on comcast/outlook??

After installing Airport Extreme my internet works well, however I can't recieve email on my comcast/outlook. Outgoing works I have rechecked my settings and they all seem to be ok. Help?

Hello mrpardue,
We've an article that provides information and steps which can help get your mail moving again.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
Allen

How to install AirPort Extreme card in eMac?

I just recently acquired a 2005 G4 eMac (the top-of-the-line model with the SuperDrive and 160 GB hard drive), and I am trying to install an AirPort Extreme card into it. Apparently I think the instructions must differ from this one:
http://support.apple.com/kb/HT2596
Since this is for the older AirPort cards.
I pushed the card in all the way, logo facing downward, screwed in the antenna, etc., but the Mac still won't recognize it! What should I do to get it working?

Numerous eMac users who installed Airport Extreme cards in the past have brought up that the Extreme card is a very tight fit in the eMac Airport slot, especially compared to the original Airport card. Often, the card appears to be fully seated, but is actually some fraction of a millimeter out. After seating the card according to all the instructions, you have to push hard on the edge of the card to get it to really seat all the way, hard enough to just start to push the 50-lb eMac away from you (don't try this with the eMac on the very edge of the table or desk!). I ran into exactly that putting an Extreme card in my in-law's eMac, and I had already read other's warnings; that may give you some idea how firmly you really need to push the card once it feels as if it's seated.

Computer won't boot after installing latest iTunes update

Won't boot after the apple screen. Turns black and disk stops Help! Was running Mavericks.

Hi Neodoc,
Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

My Mac Pro won't boot after installing the latest update

Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
Thanks

The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
Have you tried normal mode again after your Safe Boot?

20" iMac g4 won't boot after installing airport extreme card

Similar Messages

Maybe you are looking for