20 Inch Intel iMac Playing Doom 3...

Does anyone know how the new 20 Inch iMac runs Doom 3? If so how does it run, and what are the specs of the machine running it?
Any feedback is appreciated, Thanks.

http://www.macworld.com/2006/01/reviews/intelimacs/index.php?pf=1
I hope you get a more personal answer but until you do try this link.
iMac 17" Intel Core Duo   Mac OS X (10.4.4)  

Similar Messages

  • It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

  • Just got a 20-inch Intel iMac

    Hi,
    I just got a 20-inch Intel iMac and have couple of questions before I even open the box. I'm a PC to Mac changeover guy and I'm pretty new to to the Macintosh platform. I would appreciate your inputs to keep my system flying.
    To begin with, I know that I have to upgrade my RAM to either 1.5GB or 2GB and also know Crucial is the way to go.
    Apart from that, I have these questions:
    1. What do I first check for after opening the box? (Dead pixels for example and etc..etc..etc..) and how do I do that?
    2. Absolutely reqd tools and utilities to keep the system running at peak.
    3. Absolutely reqd apps.
    4. BootCamp (ofcourse) and is there a Mac OS X video conf. software that can use iSight and also can talk to PC users with any camera? Also, with BootCamp can I have multiple Windows partitions (for example having a partition for scratch disk when doing video editing)?
    5.How do I make Apple DVD Player to read a DVD image (ISOs) that are lying on the hard drive? Can this also work when FrontRow is used? I have lot of personal DVDs that I bought and would like to view them from the hard drive instead of running it from the slot.
    6. How do I map the Mac Keyboard to work in Windows when running on XP? Is there a Windows software that runs as a service to make it happen?
    Anything else I have to do?
    Rgds.

    The Mac is safely nestled in a lot of styrofoam padding inside the box, so I doubt a ding on the outside can do much damage.
    I like to use Onyx for running my routine maintenance. It is a great little app and it's free;
    Onyx
    I use Monolingual to remove language resources that build up over time as you install more 3rd party apps and Apple updates/upgrades. Also free;
    Monolingual
    AppZapper is great for removing apps you want to trash, especially if they did not come with an uninstaller. It can hunt down those pesky little files that sometimes hang around. US$12.95 with updates for life;
    AppZapper
    This is a great website for maintaining your Mac and troubleshooting problems. Dr. Smoke is an Apple Discussions contributor.
    The X Lab
    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta
    I'm sure now that I have made a few suggestions that others will come out of the woodwork with their pet apps as well!

  • 20 inch Intel iMac with 512 MB RAM:  is an additional 512 or 1 gB stick bet

    I have a stock 20 inch Intel iMac with 512 MB of RAM.
    I've read that this computer uses dual channel RAM, so I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?
    Also, anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?

    "anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?"
    Regardless who made your OEM module, it will have a label with their name and the product specs (or at least a product number, which, on a page at their website, can be decoded for its exact specs).
    Mine was made by the U.S. company Micron Technology at their Singapore factory, and the label states that the module is lead free. A similar Micron module can be purchased online from Micron's wholly owned subsidiary Crucial Technology, which is their retailing arm. Retail customers can not order directly from Micron, just as they can not order directly from either Samsung or Hynix, the other two large OEM RAM manufacturers.
    "I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?"
    I agree that more RAM is better, will make it snappier, and prefer to buy my 1GB stick of RAM from Crucial, as I know it will be compatible for my Mac and its OEM stick (regardless of the maker) as long as I use their online Mac selector tool.

  • I made Flip4Mac work on my intel iMac (plays wmv files)

    I haven't seen this posted yet ... if it has been, sorry about being redundant.
    Here's what you do :
    - Download Flip4Mac ... it'll show up on your desktop.
    - Control-click on it and select "show package contents"
    - Double click on the "contents", then "Resources" folder
    - Then double click on "Flip4Mac Quicktime components.pkg" to install
    - Before you run quicktime ... do a "get info" on quicktime and check the open in roseta box.
    Then run quicktime ... and it all works

    Here are a couple more specifics to get wmv files to play on new iMac with Flip4mac:
    After you've downloaded and installed Flip4Mac (and updgraded to Max OSX 10.4.5):
    In your Applications folder: highlight QuickTime; go to "File" drop down menu and click "Get Info"; check the Rosetta box.
    Then do the same thing in your Apps folder for Safari.
    You then need to restart your computer. This is what worked for me. Thanks.

  • I JUST ORDERED MY 20 INCH INTEL iMAC!!!

    Here are the specs:
    2.0 GHZ Dual Core Intel
    2 GB of DDR Ram
    250 GB Hard Drive
    256 MB of DDR Video Card
    Apple Care
    This is going to be stepping up from my current Power Book (See stats below).
    Is there anything I should be weary of with the new iMac? Anything I should look out for?
    ...I cant wait till i get it...

    I have the exact same system sitting in front of me right now!
    I haven't had any issues so far. WoW is absolutely incredible now that it runs natively. I can VPN to work without issue (TunnelBlick rocks!). TeamSpeex works great. DarwinPorts installed easily as well.

  • 24 Inch Intel iMac... may have bad Logic Board

    What are my options if the Logic Board is bad? Is this something you can purchase? Dont have an Apple Store anywhere near me.
    Thanks!

    What are my options if the Logic Board is bad? Is this something you can purchase?
    No, at least not from Apple. You'd have to find the logic board from some unauthorized third-party vendor.
    Dont have an Apple Store anywhere near me.
    You do have an authorized Apple service center in Wichita, Haddock Computer Center, on E. 13th St. N. They can handle the repair for you. There are also places, including an Apple Store, in Tulsa and Oklahoma City which might be an option.

  • IMAC 20  INCH INTEL WHITE USB PORTS DONT WORK

    i have a 20 inch intel imac white and my usb ports dont detect any of any external devices such hard drive and camera or usb flash ,but my keyboard and mouse are detected and work .I already did a smc reset and pram and they show up under the apple profiler and i created a new user and tried it from there still nothing .Will a power usb hub fix this issue ,i think its a low voltage issue any suggestions.I have tried all the ports as well all the same
    Message was edited by: s281er238

    Hi Enialreve,
    Thanks for posting and welcome to the Lenovo Community,
    I’d like to help you with the issue that you’re facing and I need to confirm you that all the steps that you’ve done is absolutely correct,
    And as I can see that you’ve followed all the steps that we can do inside the operating system,
    And I’d like to advise you that we can try to perform a recovery to get the machine back to the initial state and am sorry to ask you to take a backup from the data you need as the recovery will get the machine back as a new machine and all the Data on C: partition will be lost,
    Kindly turn off the machine and connect the charger and the battery and then press on the One key recovery button which is the small one with the curve arrow,
    And then the system will be booting to the recovery,
    For more information about the recovery check the below link:
    One Key Recovery
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Using an imac G3 as second monitor for intel imac

    I just purchased a 20 inch intel imac and was curious if I could use my old imac G3 as the second monitor.
    I already have the DVI to VGA adapter to use in the mini DVI port on the intel imac. Is there an adapter that I can use to plug this cable into the VGA out on the back of my old G3 imac?
    intel duo imac   Mac OS X (10.4.6)  

    The VGA port on your old iMac is output, not input,
    so what you are suggesting wouldn't work.
    To do it, you'd have to take apart the G3 and hack a
    connection from the gfx card to the display to
    work... probably more trouble than it's worth, given
    the quality & res of the old g3 displays.
    Thanks for the quick response. Looks like I will have to pick up a second monitor.

  • Upgrade Graphics card for 2007 24in Intel iMac...any word yet?

    Hello, I remember talking about upgrading my 128mb graphics card on my 2007 24 inch Intel iMac a while back. people said it was possible, but now that two years have passed almost, have they come out with new cards that fit this machine? what is the best to use and where do I get one?
    Is it easy enough for me to do myself or should I have it installed professionally?
    Thanks!

    Unfortunately not these machines were not intended to have graphic card upgrades therefore no graphics card upgrade is available for your iMac.
    If you want an upgradeable machine the next time your purchase I would recommend looking at the Mac Pro which is designed with upgradability in mind, including memory, hard drives, and yes graphics cards.

  • Eyetv hybrid on intel imac

    was wondering how 1080i works with the 24 inch intel imac or any other size with the intel dual core processors, my G5 imac works satisfactory but the specs on my eyetv hybrid is for a dual processor for 720p and 1080i signals from over the air digital tv, that is free by the way. Occasionaly my imac G5 will skip frames but the audio rarely goes out and I can't have anything else running when I use eyetv hybrid otherwise lots of skipped frames and audio drop-outs.
    Please let me know, thank you.....

    Works great on my mini and my iMac.
    I sometimes surf the net during commercials without any issues.

  • Installed WinXP on Intel iMac: No sound device!

    I purchased a 20-inch Intel iMac a few days ago. I installed bootcamp and WinXP, but there was NO SOUND!
    The control panel told me there was no audio device. So, I downloaded from Intel website, the "Sigma Tel High Definition Audio CODEC". I got the error message " This audio device is not supported by the board"
    I tried to install couple different audio drivers, but nothing seems to work so far. If there is any advice/suggestion, I would greatly appreciate!
    Urgently need help.
    20-inch Intel iMac,   Windows XP   2.16GHz Intel Core 2 Duo Processor, 250GB hard drive

    Also, with a new Mac you have 90 days of free phone tech support & 3 years of same if you purchased AppleCare.
    You can also check out Chat with a Support Agent. The online chat support is available 24 hours a day, 7 days a week.

  • How much Memory Should my IMac have?  iMac, 24-inch, Intel Core 2 Duo

    Hi, I have a problem. I have a iMac, 24-inch, Intel Core 2 Duo which had to have a hard drive replaced. Brought it home today and it is not the same? It makes weird noises when processing info and it seems to run slower. I noticed that the memory is only 1GB and this model should have 2 or something along those lines? It seems as though they didn't replace this with what I had on my original one? Can anyone help me, let me know how to verify that I am lacking what I had on this machine when I bought it and what should this model have on it? I am so ****** off right now, it isn't funny!
    Also, I can't go into my Iphoto and make any of my pictures a desktop image. That leads me to believe it is a low memory issue. Right?

    What imac do you have how old is it. The 2.4ghz 20inch model still comes with 1gb as standard in the uk anyway. most intel imac including mine are totally silent, is it overheating download a great widget called istat pro at http://www.apple.com/downloads/dashboard/status/istatpro.html this will show you your fan and temp etc. If it in warranty then take it back to apple or phone them with the machine serial number and they will inform you to what spec the imac was shipped to you. The desktop image problem - go-to system preferences then to desktop and screen saver you will find all your iphoto folder and events in the right hand side just click on your image this should work.

  • Can the monitor be fixed on an iMac if it goes black (2006 17-inch, intel core duo)?

    Can the monitor be fixed on an iMac if it goes black (2006 17-inch, intel core duo)?

    Apple consider this product vintage so they won't perform any hardware service on it. You may have to look towards 3rd parties.

  • Intel iMac won't play DVD

    I have an Intel iMac purchased in late 2009 and the superdrive has quit playing DVDs. It will burn all types of media and will play CDs and will read and install software CDs but will not play a DVD. These are new commercial movies. After inserting the DVD it spins for a few minutes then ejects. No error messages. Reboot did not help.

    I mac Mid 2010 all latest sware and updates. Superdrive suddenly wont recognize presence of media. Ejects discs after a short while. Maybe coincidence but seemed to happen after an auto update and using of itunes match.

Maybe you are looking for

  • Issue while deploying .war at weblogic 10.3.0.0

    Hi All, We have developed application and created rboimgr.war under weblogic 10.3.4 and trying to deploy at 10.3.0.0 but getting following error message: An error occurred during activation of changes, please see the log for details. http:101064(WebA

  • Problem with XML configuration

    Hello gurus! I have a problem because I'm trying to get a value from the WF container to expose it through SWFVISU as a dynamic parameter. The way I tried to do this was to manipulate the UWL XML to create a custom attribute and declaring the value c

  • AR / invoice before Good Receivable how to handle

    Hi Experts, What is the best way to book an AR Invoice of goods which are not yet received in stock. And is it possible to connect the AR invoice to the Goods receivable after the stock is available in the Warehouse?? THX Mark

  • Error in SOAP - SOAP scenario.

    hi, if you have configured the channel properly then check: 1.Whether that channel is active or not in ID. 2.Whether that channel is started in communication channel monitoring in RuntimeWorkbench. 3.Whether that adapter is active or not in adapter m

  • Decrypt password in fnd_user

    Hi, I am trying to decrypt the password using the function decrypt provided by the fnd_web_sec API. But when I try to give a dbms_output it doesn't print any result. What would be the possible cause? Any examples of how to use the decrypt function, I