200 Mhz front side bus and K7N2G IGP

Hi!
I have a K7N2G motherboard and a Barton 2500 XP CPU capable of running with a 200 Mhz front side bus. Of course I also have ddr 400.
Unfortunately the IGP cannot go to more than 196 Mhz font side bus (in my case). After that it will not boot.
Is there anything I can do beside setting the memory clock lower than the (2x) CPU front side bus or just setting the CPU front side bus lower?
I would really like the memory to run at 400 Mhz...

Quote
Question for anybody:
Is it actually safe to oc the IGP?
Assuming that a proper cooling is installed and the temperature is normal.
hi
take clarkkent57 for example.
according to his signature he has oc'ed the internal graphics core to 240mhz.
on my computer its running stock at 199mhz.
just put this in a file and call it unlocknview.reg
it will unlock some more options in nview including overclock options.
bye
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001

Similar Messages

  • Front side Bus Slow ?

      Why would CPU-z say that my front side Bus is 266 MhZ ??
    Core Speed is 2134 on the dual core and L1 data is only 32 Kbytes..?
    Multiplier X8

    Quote from: Ralphdb on 20-October-08, 12:12:32
     Why would CPU-z say that my front side Bus is 266 MhZ ??
    Core Speed is 2134 on the dual core and L1 data is only 32 Kbytes..?
    Multiplier X8
    Looks about right.  Your front side bus is running at native clock of 266MHz.  This translates to a rated FSB of 1066Mz (quad-pumped Intel:  4 x 266.66MHz = 1066.66MHz).  The E6420 is running at 266.66MHz x 8 = 2.13GHz.
    As for the L1 cache, 32KBytes is correct (32KB for data + 32KB instructions = 64KB total).  It's the L2 cache that's 4MB.  That should also show up in a separate field in CPU-Z.

  • Front Side Bus

    Hello there,
    I need help, I have a AMD athlon 64 cpu and a k8n neo plat.
    What should i set the cpu fsb to in the bios.
    Cheers

    Default is 200.
    BTW: FSB is called HTT nowadays with amd64  

  • K7t turbo2 + front side bus

    i recently bought an msi k7t turbo2 and athlon xp 1700+, but when i boot up it only shows it as an athlon 1100mhz, i've asked a few friends and they told me to set the fsb to 133. i checked in the manual how, and it says to change the jumper however the diagrams weren't too informative (or i just didn't catch the drift), i was hoping somebody could explain in a little more detail

    I have the same problem...
    I have a k7t turbo xp1800 gf4ti4200 300Wps(one HD and nothing else to steal power) the cpu temp is >50C and the cooler is put on correctly.
    And when putting the fsb to 133 i can boot up once then it will hang after ~15 mins. And if i reboot before that nothing happens the screen is just black.
    Then i have to take the power cord out and leave it out for 5 mins then i can boot again but it hangs after ~15 mins.
    But when running at 100fsb everything is working perfectly but the cpu is running slower of course.
    I dont undestand why this is happening and its driving me nuts

  • Quetion about front sid bus

       
    Good evening
    I have a question about the compatibility of a P4 processor (3.06) with a 533 FSB with a motherboard MSI neo-f p35 ---->
    http://www.msicomputer.com/product/p_spec.asp?model=P35_Neo-F&class=mb
    http://www.grosbill.com/4-msi_p35_neo_f_-54735-informatique-carte_mere_intel
    thx a lot

    See here: http://global.msi.eu/index.php?func=prodcpusupport&maincat_no=1&cat2_no=&cat3_no=&prod_no=1215#menu

  • There is a tiny gap all around the side of my ipod between front aluminium panel and stainless back. Is it normal?

    I just bought an Ipod classic and noticed that there is a tiny gap all around the side of ipod between front aluminium panel and stainless back.
    Is it normal?
    I am just concerned because when I was given the box at the Futureshop, the box had a big dent on the side.
    (as if the box was dropped from 2-3 feet high atleast)
    I was wondering the dent would've done something to make that gap on my ipod.
    I am thinking to return it if it is defective
    Any advice?
    Thank you

    Return it, there should be no gap, for creeepy crawlies to go in and make nest and poop on your iPod circuit.

  • Side, back, and center speaker on inspire p7800 not working, PLEASE HELP!

    I have had the inspire p7800 speakers for awhile, and they worked great, the sound was really great. Then a little while ago, the side, back, and center speaker stopped working. If i turn the volume up, i can hear a kind of static noise in them, but when i play a game or listen to music they don't do anything. i have an Audigy 2 zs sound card, and i just installed all the creative mediasource software. I was using the speakers fine without the software, but i read on a different post, that you can turn on cmss in the EAX control panel. i installed all the stuff, but i can't find the EAX console anywhere on my computer. all the mediasource is is a music player, and a file converter. The speakers stopped working about a week before this, and i unplugged everything and repluged it. After that the center speaker didn't work, but the others did. but now only the front left, and front right speakers work. Please help me with this problem.
    Message Edited by Will99 on 10-19-2005 12:42 AM

    Warran wrote:
    I just got the speaker system in today and was trying to set it up, I plugged all the wires in all the right places and the system would not power up. I saw the light for the wired remote flash just once. I thought it was? a power malfunction so I got a different power cord and tried it out, but still nothing...could somebody please help me. Thanks in advance.
    If it doesn't power up then it's either the subwoofer or power adaptor that's faulty. So the only thing you can do is contact customer support or the vendor.

  • 15" Macbook Pro right front side does not sit flat on the table.

    My 15" stock mbp's right front side doesn't sit on the table flat when the screen is lifted up. This is at the front corner of the optical drive. The bumper does not sit level. I have put it on the piece of glass just to make sure. It sits fine closed, but un-even when opened. Maybe the hinge is over torqued causing it to rise? I just got this from the apple store as a replacement for my first that had a bad screen 2 days ago. It's annoying for a 2000.00 dollar machine to have this issue. I took it back and they said it's in spec and that they will not let me do an exchange. Another one of their floor display MBP's had the same issue. The genius said he saw the issue but he would not to an exchange. There are two other apple stores in my area, is it worth a shot? This new second week of January build has a way better screen than the second week of December build. The coating on the screen is somewhat less and it has a better viewing angle. Other than the above issue, the laptop is fine. Is there any fix for this issue? I have read other people having the same problem. I frustrated because as a longtime apple supporter, I can't get get one out of the box that's right. Any help would be appreciated.
    Chris

    Thanks for the response. I went to the second Apple store and got the same response. It's a millimeter out off. He said that it was in spec. He said it's not perfect but it's not enough to get a replacement. So I may be over doing it here but I feel for a 2000.00 dollar machine, this should not be. It's small defect in the manufacturing process but it is one, none the less. Apple should take a zero manufacturing defect policy if a customer asks for a replacement machine. I think if it's not done right, than it should be fixed or replaced. Hey, I'll probably add some plastic to the foot that's off or I may open the thing up and bend it back to being perfect and fix this small defect but I think Apple should replace it. I have heard other having this problem and I have seen macbook pros in the store with this issue and they say it is within spec. I'll fix the issue that should have never left the factory myself. Anyway, I'll try adding more rubber to the foot.
    Chris

  • Side Chains and ducking

    I am working on a dubbing project and need to copy the original soundtrack so that the new vox 'ducks' the music/fx slightly.
    Although STP uses some of Logic's plugins (e.g. the compressor) it doesn't seem to have their ability to side chain, i.e. there is no drop down menu in the plugin bar.
    The noise gate has a side chain facility but I can't see how to use it without a specific routing. I have tried using sends to a bus and inserting there but to no avail.
    The STP manual mentions usage of the sidechain (pg54) relating to working with an external drum signal but it appears that this section has been lifted from the Logic Studio manual...
    Any ideas?

    P.S. the side chain info is in the STP Effects Reference pdf not the user manual

  • Oracle service bus and composing two web services

    All,
    Do let me know your thoughts on this.
    Currently we have two web services
    Web Service 1 - Verify Eligibility
    Web Service 2 - Approve Proposal
    Web Service 1 has one operation and accepts a well defined set of input parameters similarly web service 2 also exposes a single operation and accepts a set of input parameters.
    These are deployed and running in our environment.
    Now we have a requirement to stitch together these two web services and expose them as one single composite web service on the Oracle Service Bus 11g.
    I want to create a proxy service on the OSB as unified web service (having its own WSDL) by composing the operations and input plus output parameters of the aforementioned two web services.
    This way we can publish the WSDL to the front-end apps and they will trigger it with the required parameters and the proxy service will orchestrate the call to WS1 and WS2 and send the final output back to the calling client.
    I was able to create an outbound call from the Proxy service to the underlying business services but I am not able to expose the Proxy service as web service with a WSDL i.e. create the proxy service by choosing operations of Web service 1 and web service 2
    Please let me know your thoughts on this.
    Regards,
    Sushant

    Thanks Atheek
    The proxy service I tried to create orchestrate 2 web services.
    But where we are struggling is How can i make this proxy service (composite) as a web service along with the WSDL.
    The proxy service should be able to accept calls from the client with set of inputs representing both the underlying web services and coordinate calls b/w these two services and return consolidated output back to the calling client.
    I am not finding a way to create a proxy service (web service along with the wsdl) which is representative of the underlying web services in a consolidated manner that can accepts inputs on behalf of both the underlying web services, orchestrate calls b/w the 2 web services and return the final output back to the calling client.
    example modified to keep it brief
    web service1
    operation name: Verify Eligibility
    Input: Complex type (String name, int Id, String address)
    Output: Complex type(String approval status, int Id, String reason)
    web service2
    operation name: Approve Proposal
    input: Complex type(String approval status, int Id, String reason, int Amount, int EmployeeCount)
    Output: Complex type (String final status, String recommendation)
    Composite Proxy Web Service
    name: Composite Eligibility and Approval
    Input: Complex type ( String name, int Id, String address, int Amount, int EmployeeCount)
    Output: Complex type(String approval status, int Id, String reason,String final status, String recommendation)
    The composite proxy should be created in a manner to jam the inputs of both the underlying web services and expose a representative interface on behalf of both the web services. This composite web service interface creation (WSDL) is where we are struggling a bit.
    Because the calling clients need a unified WSDL to able to communicate with the composite web service.
    Do post your thoughts.
    Thanks Again,
    Sushant

  • No discrete 7.1 side left and ri

    Anyone get a faulty card or something that plays side left and right at the same time when either one is clicked on in the test? Also when in the THX console when the sides are going during the polarity test one way plays white noise then when you click it plays garbled crappy static instead of changing the phasing sound of the white noise. All this is in reference to an x- fi platinum. Using the 4 pole aka camcorder cables (3 band /8th inch minijack to 3 rca plugs A/V ends) on the 2 outputs next to the AD link connection on the pci card. After trying all connections the card is beign swapped out because so far all testing points to just a card defect.

    Well I stand corrected...with the lucky find of an extra 4 pole camcorder cable laying around in of all places the camcorder bag I just tested the card again and woohoo I now have side left and right independent of each other. Seems that the $200 sound card is just fine other than the minijacks are scrunched too close together for these especially big ended fancy camcorder cables that cost 6 bucks each if you gotta have em now. I think the one cable was bad you know being new and all grrr. Or after I test it with the camcorder, it could just be they are a little too fat to plug both in right next to each other into the x fi and get them to not bridge the side channels together into a mono single channel by not going in all the way. Problem solved but. Here's an Idea creative, Let me buy midi cables if I somehow happen to want those never and include the cables that fit right next to each other to allow 7. to work right out of the box and save the poor tech support personel the frustration of yet another dumb tech support call. By the way creative does sell these for only like 6 0r 7 they told me and they will fit right unlike the fancy ones I got.

  • Create PDF From Scanner - always scans both sides, although default is set to front sides

    Have Windows 7 (64 bit), Dell 2335dn MFP printer and Adobe Acrobat XI Standard.
    Have set Configure Presets/Input/Sides to "front sides" both on the File menu and the "Create" on the toolbar.
    If I do a "custom scan" it will print just one side, but from the Create/PDF from Scanner/Black and White option, it will always print both sides

    I found the problem.
    v9.9.0 Standard does not like TWAIN Drivers in the HP Scanjet 5590.  It runs flawlessly on 5590 "WIA Drivers".
    Thank you to all that tried to help.

  • Acrobat Pro XI scans both sides (blank backs of pages) when pre-configured to scan front side only

    Acrobat Pro XI scans both sides (blank backs of pages) when pre-configured to scan front side only; using Brother MFC 9840CDW and Windows 8 (was not a problem with previous Acrobat version).  Help, please?

    Update:  No solution has been discovered; and, I did check the Brother settings (since it allows two-sided printing) - nothing awry there.  Acrobat behaves normally when scanning from the flatbed (as opposed to the doc feeder).  Using Acrobat to delete every other page (blank ones) after scanning is not a viable option.  Please, any thoughts on this issue?

  • Cisco MCS Server 7825 front side LED status..?

    Hi,
    Please provide me the details of Cisco MCS server 7825 front side LED status. Because i our server one LED status showing AMBER. i know about the status of two led one is for HDD one is for Ethernet and please tell me about the third one.
    Regards,
    Deepak Sambyal

    Steve - if the servers are showing blank screen on monitor connected to console, it appears they are not even initialising the POST process. It could be due to a faulty component - could be CPU, RAM, motherboard..anything....
    Generally with this kind of issues,  you try to isolate faulty hardware, by rebooting without any component and see if it reaches POST. I would suggest open a case with TAC and I hope the servers have active maintenance.
    On another note try changing the monitor cable etc. to rule out any issue with any cable or monitor (which i doubt would be the case) just to make sure and then try a reboot and see if you see anything on screen.
    -Terry

  • MOVED: Front side Audio Connections to mainboard

    This topic has been moved to AMD VIA SocketA based board.
    Front side Audio Connections to mainboard

    Hi,
    The front panel audio socket has a "send" and "return" line for the left and right channels. The green socket on the front panel has special switching connections inside it. Normally, the send and return lines of each channel are connected together. The signal returns to the mobo, and is connected to the rear audio out socket. If you plug something into the front socket, the switches open and disconnect the return signal, effectively cutting off the rear output signal.  If the front panel socket isn't connected at all, a pair of jumpers have to be fitted between pins 5-6 and 9-10 to connect the signals to the rear socket.
    When experimenting, avoid connecting to pins 3 & 4, as these might have some voltage on them.
    Cheers

Maybe you are looking for