200 Series SNMP support

Am I correct in thinking that 200 series swiches now support SNMP using v1.3?

Yes with latest firmware.
Sent from Cisco Technical Support iPhone App

Similar Messages

  • Adobe Premiere Pro CS6 crashes with not finding a capable play module on a windows desktop with a AMD Radeon R9 200 series board.

    I installed Premiere Pro CS 6.0 on a brand new system.
    Win 8.1,
    i7 3.4 GHz on an Asus Sabertooth
    16 Gig memory
    AMD Radeon R9 290 Graphics Board with the latest drivers and Bios.
    On starting Premiere I get the (as I noticed quite frequent appearing) error message that Premiere cannot find a capable play module and the suggestion to update my video drivers.
    I tried everything I found in this forum or on the web:
    Installed the latest drivers
    Run the program as an administrator
    Updated the Graphics board Bios
    Updated Premiere CS6
    Started Gpusniffer in CMD-mode to find out what board it found and added that to the cuda_supported_cards.txt in the Premiere directory.
    All to no avail. The app will simply not start.
    The Gpusniffers report states:
    Loadlibrary “n” failed 
    Loadlibrary “n” failed 
    --- OpenGL Info ---
    Vendor: ATI Technologies Inc.
    Renderer: AMD Radeon R9 200 series
    OpenGL Version: 4.4.13084 Compatability Profile Context 14.301.1001.0
    GLSL Version 4.40
    Monitors: 1
    Monitor 0 properties –
    Size: <0, 0, 1920 1080>
    Mex texture size: 16384
    Support non-power of two: 1
    Shaders 444 :1
    Shaders 422: 1
    Shaders 420: 1
    --- GPU Information Info –
    Did not find any devices that support GPU computation.
    As I invested a lot in the CS6 Master Collection I am not considering an update tot the CC version, also because the same problem occurs in that version too.
    I would be much obliged if someone has an answer that truly will work.  This problem costed me the best part of two days’ work and fouled up my workflow considerably.

    ==========
    I tried to go into display settings and disable the Intel card. (this caused low resolution which is unexceptable)
    ==========
    This makes me think it's using that graphics "card" ( probably built into mobo ? ...called 'onboard graphics ? )
    This stuff gets tricky and sometimes the only way to make windows 'recognize' the pci graphics card is to actually take it out and boot, and then put it back in...
    Then you get mssg " windows detected new hardware" and you install the drivers...
    usually bios gives you choice of using onboard graphics or not ( but this too is wanky sometimes...sorry to say ...)
    I recently ( this past year ) had a similar sort of situation but have a desktop, where its easy for me to take off side panel and pull the pci-e graphics card and boot, and get that horrible low res default screen...turn off, install card, reboot etc...
    but anyway, it sounds to me like you're notebook is using that mobile graphics driver stuff and not the radeon. Somehow you've got to make it switch to that graphics card is maybe your solution.
    sorry I dont have notebook but maybe someone else here does and can help more...
    good luck.
    ps..its always a weird fact of life...when things aren't working 'right' something has to get done fast....
    edit:
    I dont know how much you know about windows stuff, but after you disable that intel thing and get your low res screen.. you DID try to update the driver for that card using 'my computer / device manager  '   right ??

  • Downgrading Emulex HBA firware on C 200 series servers

    Currently all of our Emelux HBA firware version 2.82A4 onto all of C 200 series server. After installing Hitachi multi pathing software (HDLM) windows 2003 servers ended up with blue screen. Now Hitachi is saying that current HBA version is not supported by HDLM and it should be STOR  Miniport 2.33.008 or less. It would be greatly appreicated if anybody give or share ideas to downgrade HBA firware? I am pretty much new with Cisco servers. Looking forward to hearing from you.
    Thank you

    Chandra,
    If the C 200 is managed by UCSM, it's a simple task.  You simply can change FW versions of the adapters via the GUI using a Host Firmware Package.  Instructions for this can be found on the UCS support pages.  Keep in mind any FW versions offered will be supported by Cisco.  Earlier versions may not.
    If the C 200 is a standalone server (not managed by UCSM), then you will need to use one of the Emulex HBA utilities to flash the firmware on the card. 
    Q. Which model of Emulex HBA do you have exactly?
    You can pull down the FW and flash util from the Emulex Website.  You'll just need to ensure you select the correct model and select "Previous Versions" tab when looking for the FW revision.
    Ex.
    http://cmw3wbp1.emulex.com/files/downloads/hardware/lpe11002/prev_fw.html
    I don't see many FW versions earlier than 2.50.x, so if you can't find it on their website you may need to contact Emulex directly.
    Regards,
    Robert

  • IAS authentication with 200 series switches based on MAC addresses

    Hi,
    I try to implement a solution based on a 2003-Server with IAS and a switch (from the 200 series) just to authenticate machines with their MAC addresses.
    I think the config on the switch is ok but I'm facing questions about parameters to put in IAS...
    Can someone help me or give me a link to a good document that explains the 'how-to'?
    Many thanks

    I have just done some more testing.
    I added the authentication mac-move permit command to the switch and it now almost works as expected.
    The scenarios now are:
    Machine without dot1x supplicant plugged into phone, when unplugged the switch immediately deletes the mac address from the port.
    Machine with dot1x supplied plugged into phone, exactly the same.
    Machine without dot1x plugged directly into port exactly the same
    Machine with dot1x plugged directly into port exactly the same.
    The problem is if someone has a machine running a dot1x supplicant and hosting a VM.
    In that case as long as you move to a different port on the same switch it works fine (as the workstation reconnects the mac-move process works).
    If you move this machine from one switch to another with the IP phone installed. the de-auth message removes the VM or the host from the original switch mac table and leaves one of the old addresses behind.
    I suppose a solution would be to ban all VMs but that won't go down well.
    I don't want to change the authentication method as we will have machines without a supplicant that need to connect to resources (i.e. using mab)
    Thanks for your help (and a faster reply than my support company who still haven't rung me back).
    Giles

  • Which E series routers support the Wireless_Advanced.asp hidden page?

    I know the E2500 and the E4200 support the http://192.168.1.1/Wireless_Advanced.asp settings but what other E series routers support this hidden page where you can set Beacon Interval, RTS and Fragmentation thresholds?

    I own the E3000 v1 and it has this feature so I presume that the E1000 & E2000 have this feature. You say that E2500 & the E4200 have the feature.  I presume that the E1200 v1 to E4200 v1 have the feature while E1200 v2 to E4200 do not have the feature. See new userguide for E1200 to E4200.
    Greetings from Northern Ontario, Canada

  • SNMP Support in 6.0

    Release notes state SNMP support is not included in 6.0 but in a future
    release any ideas when this future release will be out??

    Any list regarding what other features will be in SilverSword floating around
    the Inet like Topic clustering, automatic JMS failover etc etc.
    Thanks
    Ensell Lee wrote:
    Hello,
    The SNMP agent is currently scheduled for our next release - internally
    code named "SilverSword" - which is scheduled to be released Q2 2001.
    Thanks for your patience
    Ensell Lee
    Product Manager
    WebLogic Server
    Larry Presswood wrote:
    Release notes state SNMP support is not included in 6.0 but in a future
    release any ideas when this future release will be out??

  • Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ?

    Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
    Windows :- 2k8 R2

    Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
    Windows :- 2k8 R2

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • Does rcapi on 800 series routers support CAPI version 2.0?

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

  • Why Asha 200 doesn't support WhatsApp?

    Whatsapp is supported on x2 01 and x2 00 but asha 200 can not support whatsapp why?
    Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Asha 200 is not officially supported WhatsApp. Actually most of the older Dual-SIM phone models were not supported. So while it might be possible to install WhatsApp on Asha 200 using the direct download link from the thread Abi99 pointed out, If you end up doing that, don't be surprised to see more or less bugs.
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • Does the SONY VAIO F Series SVF15412CXB support dual channel memory?

    Does the SONY VAIO F Series SVF15412CXB support dual channel memory?  Or does it only have one slot?
    I'm curious if I can put a second stick of RAM in there for dual channel performance.

    Hi Mark, Thanks for the response.  Can you please double check that for me, or post a link to the documentation where you saw that?  I asked this question on Newegg, too, and one of the respondants heard differently:
    "i found out from sony that there is only 1 slot cause i was gonna get 1 more 4GB stick of ram for 8Gb. So iwas upset about that cause i have to get 8GB now and it costs 100$ for an 8Gb stick of ram on ebay. So this ram is expensive. So im sticking with 4Gb for now. This is a very good laptop though. I use it primarily for minecarft and steam and i get around 100 fps on minecraft so its good. I hope this helps." It's just confusing because other laptop advertisments I've seen openly stated how many RAM slots the computer had and how many were used upon purchase.  I haven't found anything like that which makes me think that there's only one slot for RAM. Thanks,Gremark

  • Can't add Epson xp-200 series printer to Macbook Air

    Hi all,
    hoping someone can help me with this before I throw either the macbook or the printer out the window in frustration!
    I recently purchased a new Epson XP-200 series printer and try as I might I cannot get it to connect to my Macbook Air either via wi-fi or USB.  I have used both the CD that came with the printer and downloaded the software online.  Currently when I have the USB connected the computer recognises that the printer is there but when I try to add the printer it attempts to update the software, then tells me that it cannot as the software is not currently available on the server.  I cannot get past this step as the computer won't let me add the printer without updating the software and Apple then tells me it doesn't have the software available despite their website telling me it is and also despite me downloading it from the web.
    Can someone please help me get past this issue!
    The reason that I bought a new printer was that my previous HP WIFI printer one day just stopped working, or should i say disconnected form the computer and i couldn't reconnect it, I assumed it was the printer, but given that I can still copy on it I'm now thinking it was a computer issue, or one of the OS upgrades to be more precise that caused the issue!

    In what context do you see "the software upgrade"?
    Is it trying to update firmware on your Epson printer?
    Is it trying to update some software on your Mac?  That would be highly unlikely since the download link I sent you has the latest software.
    To update firmware on your Epson, get the Epson iPrint app for your iPad from the iOS App Store.  (By the way, does your iPad connect to the Epson using AIrPrint?  Assuming it does ...)
    Run Epson iPrint.  Click the printer.  Then click "Advanced Settings".  Then do a firmware update from there.

  • Oracle database SNMP support

    Hi All,
    Does anyone know of an Oracle document which describes the steps necessary in configuring SNMP for Oracle (most important is on Windows but all the other platforms would be great too) versions 9 and greater? When I google on "snmp" and "oracle", I get a ton of hits but the documentation is very old and I fear out of date. I know from speaking with other folks that configuring SNMP for Oracle is a real challenge. I just can't help but think there is a document somewhere in Oracle that presents this subject in a clear, step-by-step manner. Any help would be greatly appreciated!

    Oracle SNMP Support Reference Guide 9iR2<br>
    Oracle SNMP Support Reference Guide 10gR2<br>
    <br>
    Nicolas.

  • ORACLE 10g SNMP support

    I followed the instructions of the document SNMP Support Reference Guide in order to setup SNMP support for ORACLE 10g Version 10.2. On page 2-2 I am instructed to install the peer executables but it it not described how to do that.
    Does anybody know how to install them?
    Regards,
    Helmut Reis

    Do you mean the Oracle® Enterprise Manager SNMP Support Reference Guide
    Release 10.2
    Part Number B16244-01?
    The Enterprise Manager SNMP Subagent and necessary SNMP files are automatically installed when you install Oracle Management Agent.
    emctl start subagent
    emctl stop subagent
    emctl status subagent
    The agent installer can be obtained from Oracle Enterprise Manager Downloads.
    ~ Madrid

  • Nvidia GeForce 200 series (gtx 260/280) support?

    G`Day, are the nvidia drivers going to be updated to include support for these cards ?
    Version: 177.13 has support, or is that the bad driver that has 2d performance regression on some cards ?
    looking forward to try it out on arch
    cheers.

    Thanks for the replies, will try 177.70 from aur, just hope I dont`t get this error when I installed the driver via the *.run package
    WARNING: Unable to perform the runtime configuration check for library
    'libGL.so.1' ('/usr/lib/libGL.so.177.13'); assuming successful installation.
    Could not play 32bit games a result in spite of having installed the 32bit libs.

Maybe you are looking for