2002 Imac to New Mac File Recovery

My IMAC from 2002 stoppped and would not turn on one day with a weird message. The apple store said there was nothing they could do. I am am trying to recover my photographs & music off of the computer. I am wondering if any of the data recovery software works well and also how to use it. I believe I need to remove my hard drive, plug it into my new mac, then run the recovery software , and then recover any files that show up? Can anyone verify this procedure and/or reccomend software (or a better procedure)

If your drive hasn't failed you can either put it in a drive dock or an external enclosure and then mount it on a Mac desktop. In that case, you would not need a recovery app.
If, indeed, your drive has failed, try using DataRescue

Similar Messages

Can 't connect old iMac to new Mac Mini

I'm trying to connect an older iMac (450MHz, cherry red OS 9.2.1) to a new Mac Mini (OS X 10.4.3).
I don't have a Frewire cable, so I'm trying to do it with an ethernet router. I seem to be doing it incorrectly. File Sharing is turned on for the iMac. I have set TCP/IP to configure with DHCP, but when I try doing Connect to Server from the Mini, it can't see the iMac. What could be wrong?
After I tried DCHP, I tried configuring manually. I input the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini. Still no luck.
Now what?

I don't think you even need a router for those Macs… someone please confirm or correct me, and I think the Mini has an autosensing socket that will let you talk directly to another ethernet device, in this case the iMac…
That aside, when you're not using DHCP please specify exactly what you've put in IP Address, Subnet Mask, Router, DNS Servers and Search Domains on both Macs, and do they both have AppleTalk on?
"the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini…" is only two IP addresses and this needs one each for the Macs and a third for the router… The router probably has a factory default of either 10.0.0.2 or 192.168.1.2, yes? In that case the Macs want to be x.x.x.3 and x.x.x.4
Then, did you literally mean "Connect to Server from the Mini, it can't see the iMac…" It won't, unless you either enter the iMac's Server Address or manually Browse…

New iMac or new Mac Mini... and iPhoto Library separate drive?

I have a 2007 iMac Intel Core Duo 2.4Ghz (4 meg RAM) with a hard drive in need of repair, according to Disk Utility (and repeated by DriveGenius 3.) The Repair option is not available. I have had occasional difficulty with this particular Mac, and this is actually my second hard drive,and it is out of warranty. I had already planned to replace this computer later this year.
In attempting to download and install Lion OS, the install failed, and the computer became essentially inoperable. I was able to use Time Machine to get it back running, but cannot repair what is surely a damaged HD. Apple Support came to the same conclusion.
I have become interested in a few goals: (1) To purchase a Mac Mini along with an Apple Thunderbolt monitor (when available) in order to separate my CPU from my monitor. (2) I want to separate my media files from a CPU hard drive for safety, for the very problem I am experiencing now. (3) I want to make my iPhoto library and iMovie library available to my wife – perhaps on an external dedicated drive - for her newer iMac, to various iPhones and iPads, and to two Apple TV units.
We have a home network with an Airport Extreme, and several Ethernet outlets. Both iMac’s currently use Western Digital external drives for Time Machine backups. I have another external Seagate drove solely for my iMovie files. I just purchased a Time Capsule 2TB (but have not yet opened) with the idea that this would be where the “shared” iPhoto library resides.
My questions –
Would you recommend using a Mac Mini + monitor, or go with a new iMac (my current iMac is my third and the only one that has given me some problems.) I do not have any specialized use of my computer beyond the common iLife applications.
I want my photos and videos to be easily available to my family on their Apple devices (I’m the only one with the significant family photo library) and I haven’t quite devised a plan to accomplish that. Can you make suggestions?
Thanks for any assistance you can offer.

Currently the Library is on EHD 1 and you want to copy it to EHD2?
Connect them both to the iMac. Make sure EHD2 formatted Mac OS Extended (Journaled) and drag the iPhoto Library from EHD 1 to EHD 2
To open either Library with iPhoto 11: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
It will update the Library to the new formats. Remember once you do this the older versions of iPhoto will no longer be able to read it.
Regards
TD

Restoring a time machine backup from an old iMac to new Mac mini

I am considering purchasing a Mac Mini. I currently have an iMac (2007) model. I would like to backup/transfer the apps from one to the other. Is this possible? I've been using the time machine function which has been backing up my iMac since day one to an external 1 TByte drive. If I can do this, what all info gets backed up? Will this also restore my e-mails and documents? I'm new to restoring on a Mac and want to avoid losing apps and having to reload everything piece meal. I appreciate any advice.
Patrick C.

Actually, you can transfer just about everything via either Target Disk mode or the Time Machine backup database. The effect would be the same. The System Installation procedure will ask you if you want to do that. Alternatively, you can launch Migration Assistant to do that. It's remarkably complete, including apps and serial numbers and passwords. A few things need to be done manually afterwards, of course, but not many.
Keep your iMac around for a few weeks in case something you need turns up later not to have been transferred.
Unrelated Note: DO NOT try to copy the Time Machine database from one drive to another. The database is composed of non-ordinary files and the procedure will take weeks.
--Gil

2006 Intel iMac with new Mac Mini?

I have a 2006 Intel iMac (MA200X/A) running Snow Leopard. It's finally gotten to the stage that it's running too slow to work on, so I was looking at the Mac Minis. Is it possible to use my iMac as a display for the Mac Mini?
The iMac only has mini-DVI so I was looking at the cables available and there's mini-DVI to either VGA or DVI, and then HDMI to VGA or DVI, would using the matching cables for each of those work?
(I can't really afford to spend at least twice as much buying a whole new iMac...)

No. The mini DVI port on the iMac doesn't support video in.
http://support.apple.com/kb/ht3924

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Imac has crashed..need new hard drive....had external drive connected...was using time machine.....so...itunes file should be on external drive....how do i import them to my new mac mini?

my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

2006 iMac died, new iMac to arrive today, will my files that are backed up on my external hard drive (a My Book for Mac) transfer to the new computer?

2006 iMac died, new iMac to arrive today, i have my files/music/pictures backed up on an external hard dirve MyBook for Mac. Will these files transfer to the new computer? I was also using Time Capsule on the old Mac but cannot migrate because it is dead!

Yes. Use Setup Assistant when you first set up your new iMac. http://support.apple.com/kb/HT5872

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

I transferred settings and files from old MacBook air to new one. New one now gives popup about failing to connect to server (old iMac). the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

Change your settings in Sharing preferences, for one, and remove the server out of the Finder's sidebar. Obviously, this is the result of transfering all your other computer's preferences to your new computer.

I had a data migration done from old iMac to new iMac, how do I use that file to find my old email contacts, Safari bookmarks, etc ?

I recently had a data migration from old iMac to new iMac 11.2
How do I use that data file to get old email contacts, Safari bookmarks, etc ?

FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How do I transfer my Imovie files to my new Mac?

Last night I received my brand new Imac and transferred the contents from my 2008 Imac using Time Machine BU. Everything seemed in order until I opened Imovie on the new Imac and couldn't see any of my Imovie events.
I then hooked the two computers together using an ethernet cable and used the migration feature to do the same thing.
Now it appears all my data has transferred twice( the 1 TB hard drive is almost full and the Imovie files are still not on the new Mac.
Can anyone advise me?

Click here and follow the instructions to move the files; to connect the computers together, hook them up with a FireWire cable and start up one with the T key held down.
(25800)

New Mac Pro 8-core / D700 not much faster than an iMac... in PPro CC.

So.... my very preliminary testing with our new Mac Pro using the plugin I use most (filmconvert -FC) anyway, shows that Premiere CC needs more optimization for the dual GPUs. In fact, I'd say the CPU utilization is not up to snuff either.
I know FC only uses one GPU presently from the developer. That will change. In the meantime, using a couple of typical projects with that plugin as an example, I'm only seeing 25-45% speed up in renders over our maxed out iMac (late 2012, 27") exporting the same project. That's significant of course but not the 100%+ one would think we would be seeing at the least given the MacPro config of 8 cores and dual D700s. Premiere Pro CC seems in fact to never maximize CPU (never mind GPUs). I have yet, in my very limited testing, see it "pin the meters" like I did on the iMac.
Of course that's just testing now two short (under 5 min) projects, and it depends on what one is doing. Some stuff is much, much faster like Red Giant's Denoiser II or Warp Stabilizer VFX. The improvement there can be 3-4x faster anecdotally. I used to avoid them for speed reasons unless absolutely needed a lot of the time but now they are fast enough to rely on quickly. Other stuff unrelated top PPro CC like DxO PRIME noise removal on RAW stills is much faster too, as is Photoshop CC. Some effects like blur, sharpening, resize there are nearly instant now even on giga pixel files in Photoshop CC.
And of course FCPX is much faster on it but I hate the whole editing paradigm. The timeline is just horrid on it; simple things like replacing a word in someone's dialogue is a multi click, multistep process that is nearly instant in Premiere and most every other NLE. Just to try to see your whole timeline is a chore, to see what your edits and sound are in detail are problematic, trying to keep things in sync is a chore, and you can't even zoom your timeline window to full screen! If anybody has edited for any amount of time, I do not understand how they use FCP X. If they start with that program, for example if they are young, then that is a different beast.
I'm sure Adobe will improve over time. They have to to stay competitive. In the meantime I'll take my 45%... but I wish I saw much more improvement given the cost and hardware differential. Unfortiunately, for now, the mainstream reviews I have seen regarding PPro performance on this machine were right.

That statement about 4k/5k in Premiere CC with the nMP is false, insofar as performance goes.
I just tested 5K Red raw files just dragged into Premiere Pro CC (latest version). I expected this to be slow, given my HD experience. However, on my 8 core/D700, I can play 1/2 just fine, full speed. And I even can also do that with a very streneous plugin/filter attached - FilmConvert (in OpenCL mode), also at 1/2 which is quite impressive. I can even add a bunch of other Premiere filters and SG looks and it still stays at full speed at 1/2.
Ironically, this is quite faster than FCPX which can't seem to play back 5K at all with that filter attached (it doesn't stutter, but it's not smooth... low resolution at "best performace" and reduced frame rate). Even if I remove all filters FCPX plays back Red 4k (again not transcoded) about the same as CC at 1/2, but with a seemingly lower resolution to keep it smooth. It's a head scratcher. It's like Adobe's Red handling is much better coded than Apple's in this case.
Or... it has to be attrituable to that particular plugin (other FCPX motion-based plugins don't suffer the same fate and are fast). But either way, filter or no, Premiere Pro CC is definitely and sharper looking at 1/2 when cutting Red 4k/5k with no transcode, playback in real time, than FCPX which needs to bump it down to what looks like a 1/4 or less rez to keep it smooth. So I have no idea what is going on.
This experience is the opposite with HD, where FCPX is significantly faster (using the same filters/plugin, using C300 Canon XF for HD and 4 and 5K RedRaw alternatively). Premiere seems slower in HD than FCPX by a good amount in HD and signficantly faster with Redraw 4k. Go figure.

New Mac Mini, iMac, or old Mac Pro for Pro Tools?

I asked this in another thread, but just want to get more input from older Mac Pro users from different years (2008-2010..)
I need to upgrade my Mac and am wondering what experiences everyone has had with different options for running Pro Tools and other professional audio applications.
The FW800 port on my iMac recently broke, and rather than spend a lot on getting it fixed I've decided to just sell it to someone who doesn't need firewire and upgrade.
I'm trying to decide between a newer iMac (3.1 or 3.4 GHz) with thunderbolt and USB 3 (but no FW), a new Mac Mini, also with thunderbolt and USB 3, or a somewhat older Mac Pro (2008-2010) with at least a 2.8GHz processor. Any thoughts from those of you who have used any of these, or who know more about computers in general than I do? Thanks.
Another option a friend recommended was looking for a 2011 iMac as they have both Firewire and Thunderbolt, since my audio interface runs via FW.
Thanks!

Might want to ask this on a ProTools forum as well.
fwiw I have a 4 core MacMini Server w 8GB RAM and a 2008 MacPro 8 core w 16GB.
The Mini is used as a general file and A/V server when not specificially tasked with Final Cut Suite efforts.
Unless I have serious Compressor processes running (e.g. converting h.264 to an editable format) that draws on the full cores, the mini can do a good job keeping up with the MacPro.
What the mini won't do is take 3rd party cards or drive multiple large monitors but for digital audio it ought to be fine with thunderbolt drives.
Good luck.
x

2002 Imac to New Mac File Recovery

Similar Messages

Maybe you are looking for