2004s BEx Query Designer

Hi there,
I just finished installing Netweaver04s-ECC component and transported a cube and its related queries from a BW 3.1 system. When I tried using the Query Designer for 04s, here are the issues I encountered:
1. After saving the query on a specific folder, I couldn't see it from SAP GUI. But when I tried to open existing queries and selected the infoareas of that cube, the query is there.
2. Web preview of the query designer doesn't work for me.
Btw, I have the following SAPGui version:
Release 2004s, Patch 1, Revision 184
Thanks for your help.
-Rey

Hi Rey,
to us it looks as if your portal is not installed properly.
Can you please check the learning map for this area
<a href="https://websmp105.sap-ag.de/~sapidb/011000358700004464632005E/index.htm">Learning map - Setting up BEx Web</a>.
Cheers
SAP NetWeaver2004s Ramp-Up BI Back Office

Similar Messages

BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

Problem Bex Query Designer

Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.

have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi

BEx Query Designer - Execute pops up blank Internet Explorer session

Hi gurus,
From BEx Query Designer, I choose Execute, and it pops up a blank Internet Explorer window rather than the query. It says about:blank in the URL and the page is white.
I read some posts that say to run RSPOR_SETUP, but I don't have a Java system or Portal system so does that still apply to me? I want the URL that pops up to point to the BW system which is an ABAP system.
E_URL_PREFIX                    http://BWSAPF00.mydomain.com:8100
E_URL_PATH                      /sap/bw/BEx
E_URL_PROTOCOL                  http
E_URL_SERVER                    BWSAPF00.mydomain.com
E_URL_PORT                      8100
E_SUBRC                         0
Warm Regards,
CM

Hi,
Please note that Java stack is mandatory for running Queries in web side
or for executing the Queries using Transaction RSRT -> Java Web or
for executing the Queries using Query Designer in Release 7.x .
So, please install Java stack and use BI Java components for running
Queries in web side here.
Also, please refer the following note for details:
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
Also keep a note of the following:
Please check the following link:
http://help.sap.com/saphelp_nwpi71
/helpdata/en/45/61d5aaa0546628e10000000a1553f6/frameset.htm
"With SAP NetWeaver 7.1, the Visual Administrator (VA) is replaced by
the SAP NetWeaver Administrator, that is, all relevant functions of
the VA are available in the SAP NetWeaver Administrator.
The VA is no longer delivered as of SAP NetWeaver 7.1. "
The interface is a little bit different now, but the installation
steps still follow the same logic as SAP NetWeaver 2004s.
You can use manual steps to set up integration as per note 917950.
Also, please don´t use report RSPOR_SETUP for configuration check
between ABAP and Java for SAP NetWeaver 2004s.
The report has been replaced by the support desk tool.
Please have a look at note '937697 - Usage of
SAP NetWeaver BI Diagnostics & Support Desk Tool'
RSPOR_SETUP is obsolete in BI 7.x release and Supportdesk tool should
be used in 7.x release.
Also refer the following notes:
1512988 - Frequently Asked Questions:BI Java 7.30 SP's/patches
1512356 - Patches for NetWeaver 7.30 BI Java Support Package
1506722 - Generic Note for BI Java Patches and Support Packages
And, please note that Patch Level 0 is not supported for BI Java components as per the following note:
1789842 - Patch Level 0 for BI Java Installation
Please do look at the note 1789842 for details.
Please check the Support Desk Tool as per the note 937697 and if you find
any RED signals in the file systeminfo.txt included in the file
supportdesk.zip, please correct it as per the Solution mentioned
there and check if it helps.
Thanks & Regards,
Sapna
Message was edited by: Sapna J Gurudutt

Starting BeX Query Designer from Crystal opens older version Designer

Hi,
When starting the BeX Query Designer from Crystal Reports 2008, the older 3.5 version of the designer is started and hence wanting to edit a query that was designed in 2004s raises the error: "This component was edited with a more recent version of the editor. You also have to use the more recent version to edit further. Further processing is not possible. Update your front-end".
The latest version is installed, it seems that Crystal by default opens the 3.5 version that was installed with the 710 GUI and Business Explorer etc ... Is this by design and can one set something somewhere to use the 2004s version via Crystal Reports.
Any insight is welcome.
Jacques

Hi Jacques,
that is a known issue in the toolbar of Crystal Reports.
You can start the Query Designer 3.5 / 7.0 from the BEx menu item
Ingo

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Message in BEx Query Designer Formula

Hi Experts,
I need to display message based on the value of the formula result. For Example:
If K.F1 =<2.5 Then <Message: ODD>
ElseIF K.F1 >2.5 Then <Message: Even>
Else
<Message: Determine the value>
EndIF
Thease above messages would be build in the formula column of BEx query designer
Thanks and really appreciate your response.
Regards,
Waseem

Hello,
I have done the same funtionality with the help of workbook.
May be experts can guide us how to display messages in the formula column of BEx query designer.
Thanks.
With regards,
Anand Kumar

Drilldown in BeX Query Designer

Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
Debayan

Hi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati.

Division in bex query designer

Hi experts,
I have a strange problem in bex query designer. I am trying to calculate margin in % but the calculation gives the wrong result.
The two figures I try to calculate are -25124 and -91248 (figures in 1000 NOK)
The result should be (-25124/-91248)100 = 27,53* (when formula entered in excel)
I have tried the following in Bex query designer
-25124 %A -91248 = -0,02753%
(-25124/-91248)*100 = 0,02753
What might be the problem here?

Thanks again for your answer,
I will try to explain my report (requirement from the business user)
Actual (KF)----
Budget (KF)
Sales-- -91248--
-77153
FSP-- -25124--
-18918
Margin % -
(FSP Actual/Sales Actual) 100---(FSP Budget/Sales Budget)100
Dim
Dim
Result
The margin is calculated in the cells in the bex query designer to differentiate between actual and budget. There is no option to calculate the margin in the columns as this would influence all other rows aswell.

% Calculactions in Bex Query Designer

Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
    Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                               ( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
                                                              = 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank you

Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck.

Where to write IF THEN ELASE statements in BEX Query Designer

Hi All,
I need to write a formula in query designer...
saying that to display the all Quantities in KGs.. Now articles are in Grams and KGs...
So here i need to perform calculation like... if article is in KGs divide by 1, else if article is in Grams divide by 1000.
where can i write this logic to perform calculation ...
Thanks in advance..
ravi.p

hi chetan,
No its not work.. why because i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there any solution to solve this Problem...

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Difference between aggregation and calculation tab in BEx Query Designer

HI,
I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in the properties tab i found aggregation tab and calculation tab.
I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
I not able to used that Aggregation tab it is showing as a hidden fields...
can any one tell me whats the exact difference between these tabs and when we need to use which tab?
With Regards,
Thanesh Kumar.

Hi Thanesh Kumar,
I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
I could explain to you the difference between these two tabs.
For "calculation" tab, it changes the display of result and does not change the calculation logic.
It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting) is used for further formula calculation.
For "aggregation" tab, it changes the real calculation logic.
The system takes the setting as the aggregation rule for records.
The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
Average instead of summation when aggregating records. And the Average value will be taken for calculation
in further formulas or other calculations.
For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
a basic key figure. That should be the reason why you see it greyed-out.
Regards,
Patricia

New ratio doesn't appear in Bex Query designer

Hello Experts,
I added 2 ratios to my infocube. It activated without any problem. I then added these 2 ratios to my multiprovider and activated it after affecting them to the previous infocube.
Then I connected to the Bex query designer and loaded a report in order to add these ratios, but there are not available for selection in the Ratio menu of the multiprovider.
Has anyone faced this problem?
Thanks

Try reactivating the Multiprovider again and see if that works !
I had this issue earlier, where I couldn't see two of the newly added characteristics in the multiprovider. But simply reactivating the multiprovider solved my issue.
- Danny

2004s BEx Query Designer

Similar Messages

Maybe you are looking for