2004s sneak preview

Hi,I have a few questions regarding 2004s sneak preview installation -
1. Is it basically a slim edition of ecc6?
2.Is it basically a system for practising?
3.can the java version be installed along side the abap version?
4.for how long the system's license is valid?

Hi,
. Is it basically a slim edition of ecc6?
i dont think that it is the slim edition of ECC6 because Functional Part is not available in this u can say the IDES of ECC6.0 to slim edition.
2.Is it basically a system for practising?
yes it is basically practicing for ABAP ALE and the Sneakpreview 7.0 contains Webdynpro application also.
3.can the java version be installed along side the abap version?
Yes, both can be installed in a system.
4.for how long the system's license is valid?
Abab version is valid for life long because the license is reneawable but not sure about the Java version it might be valid for 180 days, not sure.
Hope it helps u
Regards
Subhash

Similar Messages

GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP

Hi,
I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
Thanks for Your help,
Markus
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
The process that should run the GUI Server could not be started.
Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host
(for details please consult the installation guide).
103 controller.errorStartingGuiWindows 1580
Exit status of child: 1

Hi,
I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
What strikes me:
'command : "C:\Programme\Java\jdk1.5.0_02...'
Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
Message was edited by: Markus Jarasch

Installation of JDI on 2004s Sneak Preview..Please guide :)

Hello All,
Am trying to install/configure JDI on 2004s Sneak Preview.
Have few questions like:
1. Id read in a SAP article that NWDI/JDI gets installed along with the real/full package of NW2004s. So is this case not applicable in 2004s sneak preview?
2. Can you please send me a document which shows as to how can I configure or install JDI/NWDI onto SAP NW2004s SPS 7 Sneak Preview.
3. Id found one document saying "How to install JWDI for CAF/GP Development'. I was executing the steps as mentioned in this document but most of the items in the drop-down list are different + there are enabled buttons as Install & Post Installation under Guided Areas, so should I go in for Install first or jump to Post Installation directly?
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hello Sidharth,
I did all the steps as mentioned in the doc (ud sent the link for) but the Template Configuration gave me few errors while creation of SC and two more other errors.
They were related to those 3 .sca files...saying they were not found while DI Configuration.
Question:
1. If the NWDI is installated along with the Sneak Preview, then why did the server not find those required /sca files?
2. How do I test the working on SAP NWDI?
3. Is there some doc which exlains the use & working of NWDI?
4. How can NWDI be used in case of XI? Id read it on help.sap.com that using CMS, XI objects can be imported into NWDI & then used further...usin the XI Templates.
What else can be done from XI perspective?
Awaiting Reply.
Thanks & Warm Regards,
Ritu

SAP Netweaver 2004s Sneak Preview - Partner not reached

Hi all,
I've tried to search the forum for similar message but couln't find it so I post a new one, hopefully someone able to give some help.
I've installed the SAPNW sneak preview ABAP on XP, right after installation I'm able to logon to NSP system. But once I shutdown the computer and turn it on again, I won't be able to access the NSP.
The error message:
"partner not reached (host 127.0.0.1, service sapdp00)
WSAECONNREFUSED: connection refused
I'm not sure what happened, btw:
1. I have installed the MS loopback adapter
2. I've check the C:\windows\system32\drivers\etc\hosts & services file. Looks ok, I put them below for your reference
3. I've check the services,SAPNSP_00 & SAPDB: NSP are running
Is there anything need to be setup? Thanks a lot
C:\WINDOWS\system32\drivers\etc\services
sapdp00          3200/tcp
sapdp01          3201/tcp
sapdp02          3202/tcp
sapdp03          3203/tcp
sapdp04          3204/tcp
sapdp05          3205/tcp
sapdp06          3206/tcp
sapdp07          3207/tcp
sapdp08          3208/tcp
sapdp09          3209/tcp
sapdp10          3210/tcp
sapdp11          3211/tcp
sapdp12          3212/tcp
sapdp13          3213/tcp
sapdp14          3214/tcp
sapdp15          3215/tcp
C:\WINDOWS\system32\drivers\etc\hosts
127.0.0.1       localhost

Hi
Try
#127.0.0.1 localhost
127.0.0.1 <computer name>
If the computer name is ABC but a reverse lookup returned localhost. This will lead to problem later on when starting the web application server.You can correct this problem by inserting a line 127.0.0.1 ABC into the host file.
Thanks
Prince

Problem with Web Dynpro Theme in 2004s ABAP Sneak Preview

Hi !
Working on the Web Dynpro for ABAP 2004s Sneak Preview
I encountered a problem in applying a web Dynpro theme
via the URL-parameter sap-cssurl.
I tried the following URL:
http://hostname:8000/sap/bc/webdynpro/sap/webdynproapp?sap-cssurl=http://hostname:8000/sap/public/bc/ur/nw5/themes/sap_hcb
But it didn't work ?!
Could anybody tell me what went wrong ?
Thanks in advance,
Frank

Hi Frank,
Try this
1. Set all dynpro's to run with portal theme whether you run them inside/outside portal.
For this, run visual administrator -> server -> configuration adapter -> (change mode) -> webdynpro -> sap.com -> tcwddispwda -> Propertysheet.default
set the parameter sap.theme.default to your portal theme path: we've theme CustomerTheme (portal is nw04sr1 sp14) and theme url is as follow:
/irj/portalapps/com.sap.portaldesign.urdesigndata/themes/portal/CustomerTheme
2. call individual application with parameter to use portal theme as follow:
http://<portal hostname with domain>:<port>/webdynpro/dispatcher/local/WD_Project/Applname?sap-cssurl=http://<portal hostname with domain>:<port>/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/CompanyTheme
Hope it helps...
Lokesh

Web Services do not work in NSW2004S ABAP Sneak Preview

Guys,
I can't connect to the XMLA service (even though it's active in SICF) in a NW2004S ABAP Sneak Preview. Can you confirm that web services are not available in the Preview?. Will they work if i apply a patch the the SNeak Preview?
Please let me know,
Thanks,
Gili

it will work in 2004s sneak preview.
there were some problems while creating clients (2004S MiniSAP ABAP: SAPGUI crashes when creating a Web Service)
whats the exact error you are getting?
Raja

Sneak Preview ABAP - Password for Database Manager Operator Control

Hello All , My first installation 'SAP NetWeaver 2004s Sneak Preview ABAP' was aborted where I did supply the password for Database Manager Operator Account : Control . When I am trying to reinstall , the installation fails and it comes back with a message
' The check of the control user password failed . Check logfile XCMDOUT.LOG '.
I think I am supplying the correct password which I entered originally .
Thanks
Rajesh Kapoor

hi there,
the default password for control is control.
According to about threethousandfivehundredandtwelve postings in here your problem might arise due to the usage of special characters in the password, e.g. a +(plus).
What do the last few lines of your XCMDOUT.LOG read?
regards,
anton

Sneak Preview WDA - Error after I restart my laptop

Hi,
Happy Xmas to you all.
I successfully installed "NetWeaver 2004s Sneak Preview ABAP" in my notebook, after I install I was able to logon (NSP) and was able to see the example given in the document and was able to successfully test the example. But for some reason I restarted my notebook and when I try to logon again I am getting error partner not reached (host XXX.X.X.X, service sapdp00) WSAECONNREFUSED: Connection refused. What could be the reason and how I can overcome this error? Did anyone face the same problem? Could someone help me in resolving this problem.
FYI: I was able to logon to other systems (on server through network) but the problem is with NSP.
Appreciate your help.
Thanks and Regards,

Hi,
Thanks a lot for the response. This would have had definitely solved my problem yesterday, but, because of my impatience or because of my eagerness to work on that Sneak Preview, I myself couldnt wait for such a long time for the response from you or from anybody and played around with the installation and with that I started facing the problems and later realized that I should use MMC to start the engine. Now I logged my recent problem in the following Topic Sneak Preview SAP NetWeaver 2004 - Error while installing it again. If you can, could you help me in resolving this issue?
Your help will be highly appreciated.
Thanks and Regards,

Error while installing Sneak preview Netweaver 2004 --SP15 on WindowsXP+SP1

hi, i'm getting a error while installing the Sneak preview NetWeaver 2004-SP15 on Windows XP + SP1.
error message: Corrupt GZip trailer
JDK version: 1.4.2_08 and 1.4.2_09
i searched this error on google and i found it's a bug of jdk1.4.2_08.(see this page:<a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583">http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583</a>) it said this version can't run when the uncompressed file is 2GB or larger. and this bug was fixed after <b>jdk1.5</b>. but i noted that Sneak preview was not tested on jdk1.5.Ignore it, i uninstalled jdk1.4.2_08 and Sneak preview,then i installed jdk1.5 and reinstalled Sneak preview.Unfortunated, i got another error.The error code is <b>3018</b>.
could anyone please help me?
Regards
bo

I faced this problem while I was installation.
Following are my installation's step, is there any problem?
1.I have a new system just for installation, it is WindowsXP + SP1(2.5G memory and 2 CPU);
2.download JDk 1.4.2_09 from sun.com and installed it;
3.download Sneak preview Netweaver2004SP15 from sdn.sap.com. There are 3 files total.
Two are NW04SneakPreviewSP15.rar, the other is DeveloperStudioSP15.rar;
4.uncompressed NW04SneakPreviewSP15.rar. I used winrar, it's OK.
5.start install NW04SneakPreviewSP15.rar step by step according to the installation guid.
6.to this step 'SAP J2EE Engine Server Core', all are right;
7.error in the step 'Load Java Database Content';
Following are part of the log file 'jload.java.log':
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
2006-3-22 18:26:37 com.sap.inst.jload.Jload main
ÐÅÏ¢: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir C:/backup/NW04SneakPreviewSP15/NWSneakPreviewSP15/SAP_NetWeaver_04_SR_1_Installation_MasterIM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
2006-3-22 18:26:40 com.sap.inst.jload.db.DBConnection connectViaSecureStore
ÐÅÏ¢: connected to J2E on jdbc/pool/J2E
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: trying to read status file C:usrsapJ2EJC00j2eesltoolsIMPORT.sta
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: status file IMPORT.sta doesn't exist - no restart
2006-3-22 18:26:41 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table ADS_LICENSED_FORMS
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table ADS_LICENSED_FORMS created
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: ADS_LICENSED_FORMS loaded (2 rows)
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table J2EE_CONFIGENTRY
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table J2EE_CONFIGENTRY created
2006-3-22 19:07:53 com.sap.inst.jload.Jload logStackTrace
ÑÏÖØ: java.io.IOException: Corrupt GZIP trailer
at java.util.zip.GZIPInputStream.readTrailer(GZIPInputStream.java:174)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:89)
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:105)
at java.io.DataInputStream.readBoolean(DataInputStream.java:310)
at com.sap.inst.jload.db.FieldHandler.checkAndSetNullValue(FieldHandler.java:46)
at com.sap.inst.jload.db.BigIntHandler.setValue(TinyIntHandler.java:164)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
2006-3-22 19:07:53 com.sap.inst.jload.db.DBConnection disconnect
ÐÅÏ¢: disconnected
I also tried jdk1.4.2_08 and I also installed in Windows2000+SP4. But I faced the same problem too.
From sun.com, I know this error is a bug of jdk. They explained that this version can't run OK
when zip-file is larger than 2G. Then I found here's a file
(name is 'NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JAR'). It's size
is 2.08G. I suppose installation can't manage it.
I tried unzip this file and renamed unziped folder to 'SDMKIT.JAR'.
Then I found another large file in the unziped folder(name is 'F:NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JARpackpackedRoot.jar')
, so I also unzip this file and renamed unziped folder to 'packedRoot.jar'.
Then I reinstalled, of course, It's no work.
Unexpectedly, I found this download link is not available on the sdn.sap.com(see this page:https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6).
It say that 'We apologize that this version is currently not available to download.'.
I guess there are any problem in this version, are there?
So, now I think I must download another version to install.
Thanks,
Bo
Message was edited by: bo zeng

Web dynpro application deployment problum on sneak preview 2004S

Hi all,
I have installed SAP Netweaver sneak preview 2004S every thing is fine but when ever I am try to deploy a simple web dynpro application I got this error.
Nov 2, 2006 5:02:03 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : systech-sap92
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/jkumar/LOCALS1/Temp/temp45999home.ear
Result
=> deployment aborted : file:/C:/DOCUME1/jkumar/LOCALS1/Temp/temp45999home.ear
Aborted: development component 'home'/'local'/'LOKAL'/'0.2006.11.02.17.01.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [systech-sap92] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Please help me out asap.
Regards
Jitender

Hi jitender,
I've installed the same version.
After configuring the Netweaver Developer Studio (+ searching for the config) and trying to deploy a webdynpro application I was asked for an SDM password (which should be the default password from the install "abcd1234" unless you've changed it of course)
After entering it I was able to deploy it.
In other words can you check if your config settings in the Netweaver Developer Studio are correct? I cannot check now unfortunantly.
Br,
Tom.

Error while installing Sneak preview Netweaver 2004 --SP11

Hi friends, I am getting the following error while installing the sneak preview Netweaver 2004 on stack 11.It's going smoothly until 14th task and after that the 15th task 'Load java database connectivity ' the system got hanged by just loading 4 rows and it does nothing for hours.It does not give any error message.I am getting the following from the log file.
Output of C:\j2sdk1.4.2_10\bin\java.exe -classpath ./sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;d:\sapdb\programs\runtime\jar\sapdbc.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/w3c_http.jar -showversion -Xmx512m com.sap.inst.jload.Jload -sec J2E,jdbc/pool/J2E,D:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,D:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir C:/SAPNetWeaver04SneakPreviewSlimSP11\J2EE-CD\J2EE-ENG/JDMP -job "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/IMPORT.XML" -log "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log" is written to the logfile C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.java.log.
Could you guys have a look on this?
Regards,
Gopi

Hi,
This problem seems to be linked with the j2se 1.4.2_10.
Please try a fresh installation with the j2se 1.4.2_09
available at http://java.sun.com.
Also check SAP Note 716604.
Do let us know if its solved.
Regards
Srikishan

Issue with common system files for Sneak Preview SAP NetWeaver 2004

Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E]    2007-09-10 00:18:17 [synxcuser.cpp:102]
           CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING    2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
           CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR      2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
           CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR      2007-09-10 00:18:18
           CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR      2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO       2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
           showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO       2007-09-10 00:24:23
           CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E]    2007-09-10 00:24:32 [synxcuser.cpp:102]
           CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING    2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
           CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR      2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
           CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR      2007-09-10 00:24:32
           CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR      2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO       2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
           showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1

I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.

Sneak Preview SAP Netweaver 2004S SR1

Hi All,
I installed Sneak Preview SAP Netweaver 2004S SR1.
After that I found in sap management console, the second instance has yellow light. In process "jcontrol.EXE", it has status "stopped".
The developer Trace is as follows :
trc file: "F:\usr\sap\RAJ\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name   : jcontrol
pid         : 4280
system name : RAJ
system nr. : 01
started at : Mon Apr 09 13:56:39 2007
arguments       :
       arg[00] : F:\usr\sap\RAJ\JC01\exe\jcontrol.EXE
       arg[01] : pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
[Thr 5800] Mon Apr 09 13:56:40 2007
[Thr 5800] *** WARNING => INFO: Unknown property [instance.box.number=RAJJC01sumt-hyd] [jstartxx.c   841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.host=sumt-hyd] [jstartxx.c   841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties;F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties]
-> ms host    : sumt-hyd
-> ms port    : 3900
-> OS libs    : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> Admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host    : sumt-hyd
-> ms port    : 3900
-> os libs    : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID12336400 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID12336450 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID12336400           : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] ID12336450           : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] sdm                  : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
[Thr 5800] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 5800] [Node: bootstrap] java home is set by profile parameter
     Java Home: F:\rajendra\Program Files\javasdk
[Thr 5800] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\RAJ\JC01\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : F:\rajendra\Program Files\javasdk
-> java parameters    : -Djco.jarm=1 -Djco.jarm=1
-> java vm version    : 1.4.2_09-b05
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 512M
-> root path          : F:\usr\sap\RAJ\JC01\j2ee\cluster
-> class path         : .\bootstrap\launcher.jar
-> OS libs path       : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : F:\usr\sap\RAJ\JC01\exe\jstartup.jar;F:\usr\sap\RAJ\JC01\exe\jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0123364
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
JControlStartJLaunch: program = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> arg[02] = -DSAPINFO=RAJ_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4280
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=F:\usr\sap\RAJ\JC01\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\RAJ\JC01\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\RAJ\JC01\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> lib path = PATH=F:\rajendra\Program Files\javasdk\jre\bin\server;F:\rajendra\Program Files\javasdk\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
-> exe path = PATH=F:\rajendra\Program Files\javasdk\bin;F:\usr\sap\RAJ\JC01\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
[Thr 5800] Mon Apr 09 13:56:58 2007
[Thr 5800] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c   1642]
[Thr 5800] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 5800] JControlCloseProgram: started (exitcode = 66)
[Thr 5800] JControlCloseProgram: good bye... (exitcode = 66)

I have same problem ,does anybody know the solution ,any idea

Trouble with installation Sneak Preview SAP NetWeaver 2004s

Hello,
the installation of the Sneak Preview SAP NetWeaver 2004s fails at step 3 with the following error:
ERROR 2006-02-27 16:24:27
FSL-01001 Unable to check existence of account nadine\SAPServiceNSP. Der Arbeitsstationsdienst wurde nicht gestartet.
ERROR 2006-02-27 16:24:27
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-02-27 16:24:27
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I've checked following points:
- OS: Windows XP Professional
- Loopback adapter is installed and working
- hosts file contains correct IP-address
- the groups SAP_NSP_LocalAdmin and SAP_NSP_GlobalAdmin were created in step 3
- I can create the accounts nspadm and SAPServiceNSP by hand (with the same user!) and the installation continues but I ran into further errors in step 4.
Who can help?
Regards Stefan

Hi , thanks for your hints .
I am thru .
What I did : create manually the user nspadm and NSPServiceAdm under Windows user.
pb was, as it is a company computer, we also have policies about what to put in passwords (capital letter, special caracters etc ...)
Now I'll see until which step I can go.
Cheers

Problem in Uninstalling SAP ABAP sneak preview 2004

Hello ,I am trying to uninstall the SAP ABAP sneak preview 2004.but the main problem is that i have forgot the DB manager (DBM operator) and CONTROL passwords. is there any chance to uninstall with out giving passwords or to retreive the passwords ?
Regards,
Gopi

If you installed it on an XP machine, restore the system back to the date and delete all related folders.

2004s sneak preview

Similar Messages

Maybe you are looking for