2005 Apple Cinema displays not able to show movies with new iTunes

ITunes is giving me the following error when trying to watch movies on my 2005 Apple Cinema display(s).
The selected movie won’t play on one of your connected displays.
This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection).
Try moving the iTunes window to a different display. Make sure the entire window is on the supported display.
I called the Apple support, they said my displays can not support HDCP. Can anyone else comment on this?
Is this true to the best of your knowledge?
Is there anything I can do to make my movies play again? Other than buy new monitors of course.
Thanks...

Hi,
Highlight one of the applications that cannot be updated and click File> Get Info. Make sure you are signing-in to the iTunes Store with that Account Name shown in the Get Info window.
Then sign-in to the iTunes store and verify the account information as described here: http://support.apple.com/kb/HT1918
If the issue persists, try to reconfigure the security software or remove the SC Info folder as others have in this related discussion: http://discussions.apple.com/thread.jspa?threadID=1939036
Message was edited by: Jason L

Similar Messages

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Apple Cinema Display not working in Win XP

I successfully installed Win XP Pro SP2 in Boot Camp. Everything (mouse, keyboard, printer, etc) works except my Apple Cinema Display. When I switch back to the Mac OS X the display works fine. Any suggestions are welcome. Thanks.

Try WinACD
<http://sourceforge.net/projects/winacd>

Apple Cinema Display 23" brightness issue while using with Microsoft Vista

Hello there,
I have the following issue and was wondering if someone has an idea what the reason is or what can I do to fix this:
I have a 23" Apple Cinema Display running with a MacPro 2,8 GHz. When I switch to PC using BootCamp 2.1 with Windows Vista Service Pack 1 32bit the screen becomes extremely dark.
At first, on the PC side, the display has the correct brightness but after two seconds it switches to a very low brightness setting.
When I go back to the Mac side the brightness setting on my Cinema Display has changed to the lowest point.
I also have a MacBookPro, with Microsoft XP installed also using BootCamp (I cannot find the version of this Boot Camp, but it is an earlier version) to change to PC. In XP, there is a driver installed that allows me to use a slider on the PC to control the monitor brightness. But with Vista this slider is nonexistent.
I already tried changing the graphic's card NVIDIA 8800 driver to see if I can manipulate the brightness on the monitor. I realized there is brigthness slider on the Nvidia driver, but when you make brighter, the colors just get messed up, and the brightness stays as dark as before.
We have lately upgraded to Snow Leopard and had installed Spyder on the Mac side to create a monitor profile for the Cinema Display. I already deleted the profile to see if there is a change. Nothing. I already went back in time on my PC (Restore Point), also nothing.
Could I download a driver for Vista, so that I have a brightness slider on the PC side, so that I can adequately change the brightness to its correct setting.
It is amazing how the lack of correct brightness in a monitor, can ruin your entire working day! Very frustrating!
It would be greatly appreciated if someone has a solution for this issue! Thanks a lot!
Emil

Okay, I came across a thread that implies there is a problem with using the Apple ADC-to-DVI adapter to attach the older "acrylic" 23" Cinema Display to a Mac Pro DVI graphics card. Basically, the workaround is to NOT use the USB part of the adapter (disconnect it).
1) In OS X, set the desired display brightness.
2) Disconnect the USB cable coming from the converter to the Mac.
3) Restart into Windows.
The brightness setting should now remain as it was under OS X.
Confirmed to work on my Mac Pro v1,1 (dual 2.66 Core 2 Duo) with nVidia GeForce 7300 GT video card running Windows 7 x64.
Link here: <http://forums.macrumors.com/showthread.php?t=790910> for credit to resolution.
Of course, you lose the functionality of the 2-port built-in USB hub in the Cinema Display, but an external USB hub can make up for that.

My 11 year old Apple studio display died. what is best connection with new monitor

The lCD light finally quit after 12 years. So I bought a very cheap acer /led widescreenS200HQL 19 inch as a cheap quick replacement for my monitor on my quicksilver G4 933. Question is it is connected to the second display port VGA... Is it worth buying a connector so it can be connected to the larger DVI port(where the apple studio display was connected?) will that make any difference??? Things seem fine but was curious as to the difference???

Many of the Studio displays were ADC. Are you sure that other port is really DVI and not ADC?
My 2004 MDD vid card has one DVI and one ADC connector. I have it connected to a Viewsonic display from about 2007 with both VGA and DVI ports. When I connect the DVI port directly to the DVI port on the G4, the native res looks good but it too small to read (old, tired eyes). If I change the desktop res to make things a little bigger, the image looks like carp--fuzzy and possibly some distortion.
If I use the DVI-to-VGA adapter on the computer and connect it to the monitor. the image is shape and proper at any support desktop res I select.
You mileage may vary.

HT5312 I forgot my Apple ID questions but I don't have a rescue email address and i am not able to buy anything with my iTunes account!

Does anyone know what to do?

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I phone 3G not able to update aps after new itunes update!

I updated my itunes to the most recent version when it came out and now i cannot update any off my aps, it keep telling me that my billing info is incorrect. I updated my information with apple and nothing my friend is having the same problem.
after i updated my info i sync'd my phone and still nothing. help?

Hi,
Highlight one of the applications that cannot be updated and click File> Get Info. Make sure you are signing-in to the iTunes Store with that Account Name shown in the Get Info window.
Then sign-in to the iTunes store and verify the account information as described here: http://support.apple.com/kb/HT1918
If the issue persists, try to reconfigure the security software or remove the SC Info folder as others have in this related discussion: http://discussions.apple.com/thread.jspa?threadID=1939036
Message was edited by: Jason L

Can not view Podcasts on iPod with new iTunes

I just installed the newest release of iTunes for Win XP (7.1.1.5) and now I can't see any of my Podcasts on my iPod (I have an iPod mini). I want to delete some of the podcasts from my iPod, but not all of them. And since I can't view them (I can only view MUSIC) I can't do that.
Any suggestions?

Thanks for the posting to my question.
But the Podcasts currently on my iPod are not in my iTunes (I delete them after transferring to my iPod as I don't want to get confused which are new and which are old...).
So the problem is my inability to access my podcasts that are on my iPod as I want to delete the ones I've already listened to... If you have another guess I'd be very happy to give it a try.

30 inch Apple Cinema Display-system prefs not showing native resolutions

The 30 inch Apple Cinema Display, seems to be working fine with the mac pro, but when I try to hook up the 2009 mini, the display preferences do not show the mini's native resolution of 1920x1200. The maximum it shows is 1280x800, and only gives a few other choices. This mini had once been attached to a TV monitor, so I am wondering if that has something to do with the lack of choices in the system preferences. Does anyone have any ideas on how to get the system preferences to display the correct info so that I can adjust the resolution ?
Thanks

Being compatible with the 24-inch Cinema Display and being able to use it at resolutions higher than 1280 by 800 doesn't necessarily mean that it can drive the 30-inch Cinema Display at its full resolution. You need to use a dual-link DVI connection as stated above.
(62751)

Second display from iMac27" (late 2009) miniDisplay Port worked fine until today- now no longer connects to Apple Cinema Display

Have a configuration of an iMac27" (MAC 27"/4850-512MB PROCESSOR 2.66GHZ QUAD-CORE INTEL CORE I5 Dec 2009 model) and a second screen Apple Cinema Display 2009 model 24"
The setup with the Apple Cinema Display has been working fine for 3 years and since yesterday the second screen refuses to work.
Connected it to a MacBookPro and the Apple Cinema DIsplay functions fine sot my conclusion is it is not the Apple Cinema Display's error.
Could it be that the Mini Display Port on the iMac is somehow broken? Or is there a software fix I need to checkout?
Thanks for your help on resolving this issue.

UPDATE:
As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

Apple Cinema Display (20-inch DVI 2005) not working after 10.10.3 update

I have an Apple Cinema Display (20-inch DVI 2005) that isn't working after installing the 10.10.3 update. The screen is just blank, and the power light just blinks a few times every 30 seconds or so. I use this as a second monitor with my iMac (27-inch, Late 2012). Any way to fix this? Thanks!

Thank you for the update!
Next I would recommend the Reset the System section of the following article for additional troubleshooting:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
I would reset the SMC and the PRAM together, in that order one more time, then do the Safe Boot if needed.

HT5299 i have an apple cinema display circa 2005. what thunderbolt adapter do i need in order to be able to plug it into a current mac mini?

I have an apple cinema display circa 2005. What Thunderbolt adapter will I need in order for it to work with a current model Mac Mini?

see > I have an Apple Cinema Display ADC. What adapters do I need to hookup my ADC connected monitor to my Mac Mini.
or > Using Older Apple ADC Displays with Mac Pro - The Mac Observer
and > Thunderbolt and ADC: Apple Support Communities

I have an old 30" apple cinema display (2005) I want to use as a 2nd monitor to a new iMac (2012). I don't just want mirror image of iMac; what's the best way to do this?

I have not bought the iMac yet but will do so very soon and just want to make sure I have what I need to get everything setup including adding the old faithful 2005 30" cinema display. Currently I am driving the old 30" cinema display with a macbook pro also purchased 2005 and happy to say I got a lot of good miles out of this rig. What's the best way to connect the old 30" monitor as a second display for the new generation iMacs?
Other Questions
I can find online new in unopened box a 2012 iMac 27" i7 with 1T Fusion Drive for $1899 no sales tax. This seems like a pretty good deal since I notice the same is available from Apple refurbished for $100 more plus sales tax. I know that they say the Fusion drive is a lot faster on 2013 models but some of the speed tests I reviewed online showed the 2012 i7 and 2013 i7 very close on speed for both storage and processing. Any thoughts?
I don't like changing batteries so I would buy a separate Apple keyboard with numeric pad since it only comes with wireless keyboard. I'm a trackpad enthusiast having been using my macbook pro trackpad with current set up; and I am prepared to buy the Apple trackpad and replace batteries every 2 months but I would greatly prefer USB connection and rechargeable trackpact. I know Logitech makes one so if anyone is using and knows how it compares to Apple's I'm all ears.

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

Using the Macbook with new LED Apple Cinema Display? Not a beginner's Q...

Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed.
I just got a 24" Apple LED Cinema Display and am using it with my 13" Aluminum Unibody Macbook. What I do is dock the Macbook (with closed screen) when at home with the big display and just use that. I enlarge program windows and arrange the layout (in different spaces) to take advantage of the large screen and resolution. So far so good.
But I'm a student and take my macbook with me to class. When I open it up, all the program windows are set as they were on the larger screen, which means some are out of view or simply not well-adjusted for the smaller and lower resolution of the Macbook. I manually adjust these and work on the Macbook that way.
But when I return home in the evening, I have to adjust them again once I 'dock' the Macbook. Kind of a pain if I'm doing this twice a day.
What I'd like to know is: is there a setting or group of settings that would do this automatically for me? A program? An AppleScript? Surely someone out there has had the same issues and has found a fix, if such a thing exists. Or is it just a fact of nature one deals with when working on two screens?
To preclude one response: yes, I know I can mirror the displays when I open the Macbook along with the LED Cinema Display. But this simply mirrors them using the lower resolution and dimensions of the Macbook screen. And that kind of negates having the larger, Cinema Display.
So - any thoughts? Solutions? How do you guys manage with this?
Thanks,
Jeff

I don't really have a solution for you but wanted to link you to a discussion on this very topic that took place last month on MacInTouch.
http://www.macintouch.com/readerreports/helpplease/topic3939.html#d24sep2009
The conclusion seemed to be that it is not an OS issue, it's an application issue. There really was no good answer but some good insight into why the problem exists and why it may not be something Apple can fix.

Bridge CS5 preview / slideshow not working on 27" Apple Cinema Display

I'm using my 2009 (black key) MacBookPro and Mac OS X 10.6.7 running Snow Leopard.
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
Adobe Bridge CS5 works beautifully on my MBP, my photography workflow depends on Bridge.
However, when I attach my 27" Apple Cinema Display and try to preview images by hitting the space bar I get a gray screen. Likewise, the slideshow renders only gray.
It's not the "black out other monitor". I've cleared the cache to re-render all the previews.
I've scoured these forums as well as the Apple ones, and the helpful folks currently at Photoshop World in Orlando advised me that, collectively, the kind people here know everything. I know I can't be the only photographer who uses this configuration. I'd like to use the display for client previews/ordering.
I would so appreciate any tips you may have for me; thank you in advance for your time.
Warmly,
Darcy
http://hisandhersphoto.net

Yes, thank you. I found that post - among others when researching before I asked. I tried all the suggestions in that one and in the others.
My issue isn't low quality rendering in the preview and slideshow - my issue is NO rendering at all in slideshow and preview. It's just blank. Gray.
I deleted the cache in my library and through the Bridge program itself to rebuild the previews. I tried the various options of "software rendering" on and off, and different configurations in the preferences and none seem to make the preview or slideshow work. I have all the updates from Adobe and from Mac.
I tried importing the photos I need to show my clients (who are coming to my studio this evening!) into Lightroom 3, and the LR slideshow works. But using LR and having to import photos into it is an extra step not in my workflow.
Ideally, I can make Bridge work instead of making yet another resource-consuming copy of these photos on this computer via the Lr library.
So - current state is unsolved.
Lightroom 3 slideshow and preview works, but isn't ideal since it involves importing the images into Lr. Since that works - would that mean my video card is acceptable?
Bridge can show thumbnails on the 27" display but no preview or slideshow.
Bridge preview and slideshow works perfectly on my 15" MacBook Pro.
I'm so disappointed since I bought the 27" Apple Cinema Display this week and was told it would work with my computer "out of the box" - I was sure to ask several times, "so there's nothing else I need to buy or do to make this work with my programs? Just plugin and go?" and several times I was assured, "Yes... plugin and go."
I sure would appreciate anyone who's made Adobe Bridge work with a 27" display. Thank you!
Darcy

2005 Apple Cinema displays not able to show movies with new iTunes

Similar Messages

Maybe you are looking for