2006-Apr-25 "Report this post" change...

Hello, friends,
I noticed last evening (MDT in U.S.) that a "report this post" link has begun to appear on threads. 
(I'm "L3.")
Personally, I'd seldom used the function when 'twas granted in the previous edition of Apple Discussions. So, for clarity, I presume its intent is to facilitate communicating egregious instances of misbehavior that don't comply with the Use Agreement...?
Thanks to Apple folks for returning this function, which I'd read had been "in the works" for some time. Are there any other "new" functions that I missed — or anything similar on the "to-do" list?
Thanks again,
Dean

Btw, I intermittently request that a Host "wrap" (or "fold," as you put it, Brian Z.) a post within a thread that's become difficult to read. Would that also be considered appropriate to "report this post," or would a stand-alone message be preferable
In my experience, the Hosts generally prefer that any issue that they need to decide upon is brought to their attention using the 'Report this post' link. That would include wraps and folds and other formatting issues; perceived violations of the ToU; posts that need to be moved; duplicate posts, etc. Use the "Optional Reason" field to draw their attention to the specific issue you are concerned with.

Similar Messages

  • Report this post ?

    Today I just noticed a link at the bottom of posts that says "report this post". I became level 2 two days ago, and am wondering if this is new to level 2 users, or if it is new to all users as of today (march 1st). I didn't notice this yesterday, but I have been known to miss things...

    818/3264
    Hi maciscool,
    (I agree with your name
    Yes, this ancient feature was disabled until last week, that's why you didn't notice it.
    Also, I'm not sure it is available to Level 1 members.
    Axl

  • "Report this Post" Messages Bounced to Email

    The last two times I used the "Report this Post" link the messages bounced back to my email address from a third-party server. I don't know if the problem resulted from a misconfigured co-location server or Apple's mail server, or if it was the result of an iframe injection or other cross-site scripting attack. I sent several messages directly to Apple about this but have not received a response. Has anyone else experienced this?
    Received: (qmail xxxx invoked from network); 6 Oct 2009 00:00:00
    Received: from xxx.contegix.com (HELO xxx.contegix.com) (xxx.xxx.xxx.xxx)
    by xxx.xxx.xxx.xxx with SMTP; 6 Oct 2009 00:00:00
    Received: by xxx.contegix.com (Postfix)
    id xxxxxxxxxxx; Tue, 6 Oct 2009 00:00:00
    Date: Tue, 6 Oct 2009 00:00:00
    From: [email protected] (Mail Delivery System)
    Subject: Undelivered Mail Returned to Sender
    To: [email protected]
    Auto-Submitted: auto-replied
    MIME-Version: 1.0
    Content-Type: multipart/report; report-type=delivery-status;
    boundary="xxxxxx.xxxxxx
    Message-Id: <[email protected]>
    This is a MIME-encapsulated message.
    --xxxxxx.xxxxxx/xxx.contegix.com
    Content-Description: Notification
    Content-Type: text/plain; charset=us-ascii
    This is the mail system at host xxx.contegix.com.
    I'm sorry to have to inform you that your message could not
    be delivered to one or more recipients. It's attached below.
    For further assistance, please send mail to <postmaster>
    If you do so, please include this problem report. You can
    delete your own text from the attached returned message.
    The mail system
    <[email protected]>: delivery temporarily suspended: host
    xxx.apple.com\[xxx.xxx.xxx.xxx\] refused to talk to me: 554 Open proxy list.
    Review your server settings.
    --xxxxxx.xxxxxx/xxx.contegix.com
    Content-Description: Delivery report
    Content-Type: message/delivery-status
    Reporting-MTA: dns; xxx.contegix.com
    X-Postfix-Queue-ID: xxxxxxxxxxx
    X-Postfix-Sender: rfc822; [email protected]
    Arrival-Date: Thu, 1 Oct 2009 00:00:00
    Final-Recipient: rfc822; [email protected]
    Original-Recipient: rfc822;[email protected]
    Action: failed
    Status: 4.0.0
    Remote-MTA: dns; xxx.apple.com
    Diagnostic-Code: smtp; 554 Open proxy list. Review your server settings.
    --3883A8B3ACA.1254814094/xxx.contegix.com
    Content-Description: Undelivered Message
    Content-Type: message/rfc822
    Received: from xxx.contegix.com (localhost.localdomain \[127.0.0.1\])
    by xxx.contegix.com (Postfix) with ESMTP id xxxxxxxxxxx
    for <[email protected]>; Thu, 1 Oct 2009 00:00:00
    From: [email protected]
    To: [email protected]
    Message-ID: <[email protected]>
    Subject: Notification: innappropriate message
    MIME-Version: 1.0
    Content-Type: text/plain; charset=ANSI_X3.4-1968
    Content-Transfer-Encoding: 7bit
    Date: Thu, 1 Oct 2009 00:00:00
    The following post is innappropriate
    \[message content\]
    \--xxxxxx.xxxxxx/xxx.contegix.com--
    ----------

    capaho,
    Previous related Topics:
    9/3/09 Duplicate Post Report Rejected
    9/6/09 Is anyone else getting bounced email notifications for "Report this Post?".
    9/8/09 Weird bounce message when I report a questionable or duplicate post
    9/25/09 Does this indicate a problem on the forums
    ali b

  • Just Wondering....Report this Post?

    Hello,
    Just today, I noticed below everyone's post, there is 'Report This Post' button.
    What is that for?
    Silly question, but I was just wondering.
    Thanks.
    C h r i s t o p h

    Hi Christoph *
    The report this post button is for reporting inappropriate content or posts that violate the ToU (http://discussions.apple.com/help.jspa).
    You are seeing this because you have reached level 2 on these forums (more info about levels in ToU documentation). You are now also able to post in the User tips library (http://discussions.apple.com/forum.jspa?forumID=599)
    J.C
    Message was edited by: J.C

  • "Report this post" has disappeared just when I need it

    I think the moderators should take a look at this - this guy's threads seem to start of sensibly enough before deteriorating into paranoia.
    AK

    Not all people have lost the button.
    However, you have posted to the right location if you felt a thread required reporting.
    Austin,
    I don't think your thread needs reporting so much as someone to clarify that what has happened is not a hack, but rather a misunderstanding of how network updates can fail. It is possible they have a bad router, or a bad routing software that doesn't work with their system, or both have decided to turn on a routing setting that blocks software update, or they have an internet service provider that has blocked the right port.
    It would seem one poster jumped to conclusions, and the other is just not able to post as frequently as the other would desire.

  • "Report this post" still for level4/where are "points"?

    a privilege of level4 was to report the "abuse" of the forum; that option is still availabe only for level4 gurus.. but we don't have anymore any levels... (??)
    in term of use, I do read an explination of "points", but MyProfile doesn't display any such "points"....
    that is a kind of inconsistency, isn't it...?

    Hi Tom,
    thanks for your profound statement...- but... (<<in the iM's forums I'm well known for my buts... single t):
    software has to fullfill many standards; at first that of the IT dept, who has to handle it on a daily/minute basis... but there's another group of followers: the users (user alarm!!)... I studied a long time ago "communications" (whatever that means).... so, my dimensions are not server-load, perfomance, bandwidth etc, but usability, simplicity, content, et al.
    my O.P. concernd the point/level thing... I complained the lost of level-indicators, because I'm used to use them as quality indicators; that's why I wrote never change..., because changing something, I experienced as reliable & good is just "allowed" by something "better"... which I haven't found yet, even more, the level systems still works in some "stealth mode", isn't transparent for the average user as me......
    your statement/background info touches the p.o.v. of an engineer... who has to hold a system stable with 100k of users, 24/d, with zillions of posts... chapéau for that!.... my Qs is from the the other side's p.o.v....
    that's no critic against you, Tom, .. I just hoped for some "commend about future products"....

  • "Report this post" feature

    Have I missed something or has this feature just been turned back on again for Level 3s?
    15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

    Hi JDee
    Thanks for the prompt answer - just as quick as ever
    I thought they usually include some form of announcement that appears in the sidebar, or have I missed that?
    15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

  • Report a post

    How do you report a post (actually there are 5 of them just the same):
    http://discussions.apple.com/thread.jspa?threadID=1190029&tstart=0
    I guess Apple Discussions server did not update properly lately because I still do not have the "report this post" link .....
    Then someone else can report it instead.
    So this ends up being a request more than a question....

    Hardy Geer wrote:
    It is more than a moronic joke. He is trying to get some illegal cash.
    Not necessarily. Do not assume anything in the post or the user profile is accurate. The perpetrator may be targeting someone by masquerading as him, or simply trying to get a nice list of Discussions users email addresses for those irate enough to reply to the one listed in the profile.
    Like with all spam, the safest thing to do is report it if possible & otherwise ignore it. If this sort of thing becomes more common, the moderators may have to make changes either to staffing hours or to signup procedures or something, but it is their concern & not ours.

  • Which level acquires 'report a post' capability.

    I'm just curious as I have read posts in the last couple of months where level 2 was mentioned by both a moderator and an Apple employee in this group as the required level.
    However, I have also read on another post that it is level 3:
    http://discussions.apple.com/thread.jspa?messageID=12048636&#12048636
    I just reached level 2 and do not see the 'report a post' link. Is there something I need to do, will it come in time, or do I really need to reach level 3?

    Unless it has been changed recently, my understanding is that Level 2 is required to see a "Report this post" link. You also need to be logged in. Here's an example of where it's located — click to enlarge:

  • WM settings of processing the posting change in the background?

    Hello,
    When WM is active and usage decision is made then posting change is generated in 922 area in WM. We need to process this posting change.
    My question is, how can I make the process automated as follows.
    u201CWhen usage decision is made in quality then, then WM stock will turn in to unrestricted and posting change generation and process should happen in the background.u201D
    What are the related settings of processing the posting change in the background?
    Thanks

    Dear Milind,
    Please have a look at OSS notes nos. 965094 and 566090. As a rule, direct transfer order creation is possible if the posting triggered by the usage decision (to unrestricted use stock, for example) refers to the entire inspection lot quantity.
    Best regards,
    Christiane

  • Someone with enough points to report a post

    can someone with enough points please report this post
    https://discussions.apple.com/message/16308484#16308484

    David, thanks for being so vigilant, but don't worry, there are many people who read the forums and action posts, and the moderators have automated systems for detecting problem posts also. So just enjoy the forum

  • Posting change notices

    Hi
    process for purchased material is to have it come into Storage Location XXX. Once the usage decision is done in QA32 the materials are then transferred to the correct location as defined in material master. but They do this using MB1B 311 and they are always getting the 922 issues.
    Please asssit

    Hi
    Negative stocks are there in Storage type 922 because you have transfered the material through 311 mvmt before completing the posting change.
    As per process, usage decision have to be made in QA32 and stock to be transfered to Unrestricted from Quality stock in same QA32. Here system will generate one posting change notice. Transfer this Posting change in to TO and confirm the same. Then make 311 mvmt to transfer the material say for example from receiving Storage Location to Warehouse storage location
    Regards
    Shantha Kumar

  • Report S_ALR_87010175 - Posted depreciation, related to cost centers

    Hi experts,
    I run report S_ALR_87010175 - Posted depreciation, related to cost center.  I canu2019t fill field Cost Center on the selection screen . Help for dictionary is available. I run this report withouh filing this field but I havenu2019t field cost center on report. I h've changed  loyout and inserted cost center, but field Cost Center is empty. Why?
    Rgds Stenwa

    Hi,
    You can get the field "Cost Center" on the selection screen, by selecting the " + " (All selections = Shift + F7) button.
    In the report output, you will get the cost center as sorting field & the sum field. You can the details in the layout change, click the layout button in the right edge to get the option to change / select / save the layout.
    VVR

  • [Forum FAQ] How do I send an email to users when the data in the report have been changed in Reporting Services?

    Introduction
    There is a scenario that the data in the report changes infrequently, so the users want to be informed and get the most updated data once the data changes. By default, report server always run the report with the most recent data. Is there a way that we
    can subscribe the report, so that we can send an email to users when the data in the report has been changed?
    Solution
    To achieve this requirement, we can create a subscription for the report, then create a trigger in the table which including the report data. When this table has data insert, update or delete, it will be triggered and execute the subscription to send email
    to users.
    In the Report Manager, create a subscription for the report and make it only execute one time.
    When we create a subscription, a corresponding SQL Agent job will be created. Then we can use the query below to find out the job based on ScheduleId:
    -- List all SSRS subscriptions
    USE [ReportServer];  -- You may change the database name.
    GO 
    SELECT USR.UserName AS SubscriptionOwner
          ,SUB.ModifiedDate
          ,SUB.[Description]
          ,SUB.EventType
          ,SUB.DeliveryExtension
          ,SUB.LastStatus
          ,SUB.LastRunTime
          ,SCH.NextRunTime
          ,SCH.Name AS ScheduleName   
              ,RS.ScheduleId
          ,CAT.[Path] AS ReportPath
          ,CAT.[Description] AS ReportDescription
    FROM dbo.Subscriptions AS SUB
         INNER JOIN dbo.Users AS USR
             ON SUB.OwnerID = USR.UserID
         INNER JOIN dbo.[Catalog] AS CAT
             ON SUB.Report_OID = CAT.ItemID
         INNER JOIN dbo.ReportSchedule AS RS
             ON SUB.Report_OID = RS.ReportID
                AND SUB.SubscriptionID = RS.SubscriptionID
         INNER JOIN dbo.Schedule AS SCH
             ON RS.ScheduleID = SCH.ScheduleID
    ORDER BY USR.UserName
             ,SUB.ModifiedDate ;
    Create a trigger in the table which including the report data.
    CREATE TRIGGER reminder
    ON test.dbo.users
    AFTER INSERT, UPDATE, DELETE
    AS
    exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
    Please note that the command ‘exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'’ is coming from the job properties. We can go to SQL Server Agent Jobs, right-click the corresponding job to open
    the Steps, copy the step command, and then paste it to the query.
    Then when the user table has data insert, update or delete, the trigger will be triggered and execute the subscription to send email to users.
    References:
    Subscriptions and Delivery (Reporting Services)
    Internal Working of SSRS Subscriptions
    SQL Server Agent
    Applies to:
    Reporting Services 2005
    Reporting Services 2008
    Reporting Services 2008 R2
    Reporting Services 2012
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Thanks,
    Is this a supported scenario, or does it use unsupported features?
    For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
    in a supported way?
    Thanks! Josh

  • Clearing posting change notices

    Hi All,
    I'm trying to close out posting change notices manually by marking the status as U through LU02. Not able to create TO and clear this as the stock is no longer available and these are very old ones.
    The problem is that the source and destination data are the same and its throwing an error.
    Can you suggest any ways to clear these open posting changes
    Regards,
    Ashwin

    Sap provided corrrection program to clear the posting change notices.Develop this program in your system then check.We are using 4.6c version.
    To set the posting change in question to processed (U), please
    implement the following correction program in your system.
    1) Create program 'ZLTEST00' with type '1' and application 'L' with the
    following code:
    report zltest00.
    tables: lubu.
    parameters: w-no like lubu-lgnum, "warehouse number
    post-no like lubu-ubnum, "posting change notice
    status like lubu-statu, "status
    update. "update
    select single * from lubu where lgnum = w-no
    and ubnum = post-no.
    write: / lubu-lgnum,
    lubu-ubnum,
    'Status old >', lubu-statu,
    'Status new >', status.
    if update ne space.
    update lubu set statu = status
    where lgnum = w-no
    and ubnum = post-no.
    if sy-subrc = 0.
    write: / 'Update posting change notice'.
    else.
    write: / 'No update posting change notice'.
    endif.
    else.
    write: / 'No update posting change notice'.
    endif.
    To run above correction program:
    1) You have to indicate warehouse number, posting change number and the
    status which you want to set in the posting change.
    2) Without including the UPDATE-parameter, the program only shows the
    posting change, or
    3) When you mark the parameter UPDATE then the posting change will be
    changed.

Maybe you are looking for