2007 macpro1,1 badblocks New hard drive?

My MacPro has been acting strange for over two weeks. I get error messages about extensions, startup items them my InDesign and Photoshop fail to open. I replaced all my fonts on every level. I thought it might be a virus. I've run TechTools 5 on it all weekend. It shows that I have over 20000 bad blocks. Should I just go ahead and get a new internal Hard Drive? if so what would apple recommend as the most reliable but with the most capacity. I told my University Director that either way I will need a new hard drive soon as the machine is a macpro 1,1 3 mhz from 2007, and it's not like maxtor is the most stable anyway. The time it takes to reformat/zero out seems a waste of time. Thank you for your time. Paul Alencikas

Grant, TechTools Pro gave me that number and it wasn't even half way done with the process! It gave me a laugh. Really I should write techtools and tell them it's really OVERKILL in the bad blocks.
My boss is getting my 2 WD 1T Black Caviar SATA 6GB HardDrives and X.6.7. Is there anything I need to know or can read about that you reccomend when I go to swap out the HDs and format from the osx install disk? Should I initialize the main drive with the original software that came with the computer? I think it was 10.4. or just use the new general snowleopard disk? Oh, thanks for all your help.-Paul

Similar Messages

I have installed new hard drive to iMac intel 2007 model and all I get on the screen is a grey question mark, tried system disk and now that's stuck in drive and just spinning around, any help please

Sorry put all question on subject line. As I said fitted new hard drive, but all I get is a folder with a flashing grey question mark. Tried system disk but that is now just spinning around in DVD drive and I can't get it out. Any help with these problems would help

Sounds like the new drive is not being recognized. Could be it's a SATA3 drive with a 6Gb/s transfer rate and needs to be jumpered down to 3. But if the 2007 is 1.5, it may not work at all, even if jumpered down. Other possibility is a not properly secured cable or a cable that's come loose from the logic board.
What is the model of the 2007 Mac? What's the new drive? Did you do the installation or was it done by a shop?
You can find your model here. Look next to Standard Hard Drive:
http://www.everymac.com/systems/apple/imac/index-imac.html
Message was edited by: WZZZ

I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32bit

I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.

You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
To access the email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page.

Music and photos transferred into itunes and iphoto from external hard drive on to my new hard drive installed in my 2007 macbook

I just installed a new 250 GB SATA hard drive on to my 2007 macbook computer as the old one failed. I had backed up my old hard drive on to a 250 GB external hard drive using time machine via a USB cord. I am having trouble locating my music and photo files to transfer them into itunes and iphoto on my new hard drive. I have signed in to my itunes account, where it shows my app and book purchases, but not my music purchases. I have over 1,000 songs purchased. Any help would be appreciated- Thanks!

Hi aourada,
Since you have a current Time Machine backup of your computer you should be able to use the Migration Assistant to recover your music and photos.
Archived - Mac OS X v10.6: How to use Migration Assistant to transfer files from a Time Machine backup
http://support.apple.com/kb/HT4500
Alternatively, if your music was purchased from the iTunes Store, you can re-download available songs for free.
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Thank you for using Apple Support Communities.
Nubz

Does my mac just need a new hard drive?

18 months ago, my iMac stopped working, i replaced the hard drive, but now its died again. The iMac turns on but it doesnt boot. Does it just need a new hard drive? and if it does, is there any type of particular one i would need and how much would it cost? also sorry to be asking so much, but would an external hdd or a portable hdd work on it?
also if its important its an iMac 20" 2007
i dont know what the specs are as i cant remember and the pc cant turn on to look

Zap the PRAM and Reset the SMC, then try again.

After new hard drive, Leopard installed, cannot log in - Help Please!

The local Apple store installed a new hard drive and Leopard on my G5 desktop yesterday. I attempted to restore my applications and documents, using Time Machine from my external G-Drive but am getting the message "you may need to enter the name and password for an administrator on this computer to change the item (Turbo Tax Premier 2007)". I also tried to install the application iWork which I purchased and it too would not let me because it was asking for a password. I typed my old password and user name that I had given to the Apple store (they asked me for it) but it was not accepted or recognized. Should I return to the Apple store and let them do this for me, or is there a reason my password and user name is not being recognized? Also, I do not have the Leopard DVD that they installed from to make any changes or reset the password (I have the original Leopard that I purchased when it became available but hesitate to use it since it caused my Mail App to become corupt which was the reason I went to the Apple Store in the first place as my other Leopard applications and system seemed to be working ok - but when they attempted to reinstall the OS, that's when they called me and said I needed a new hard drive since the attempted installation failed.) Sorry about rambling on, but wanted to give you as much info as possible about my situation and would appreciate any suggestions and help.
Will I have to reinstall all my applications such as Quicken, TurboTax, iLife, ect or should they be restored from my G-Drive? I'm worried about loosing my "documents" as they were created using the older "Appleworks" application; that's why I purchased iWork, to transfer them to.
Thanks again.
Charles

Just thought I'd refresh my recent post to see if any of you current viewers might have a suggestion as how to fix my problem with the "log in". I really appreciate any ideas on this subject.
Thanks,
Charles Adam

I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-Steve

Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

2007 Macbook pro kernel panic, hard drive problem?

Hello!
I've been trying to sort this for a few weeks now, and I'm hoping someone may be able to shed some light on the situation.
Problem:
I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB) which a few weeks ago suddenly died on me. It has what I believe is called a kernel panic. On startup a grey screen falls down with a box saying that I need to restart the computer.
I took it to my local apple store where they booted an OSX (not sure which) from an external drive (I think it was using a firewire cable). The MacBook appeared to work fine from this external hard drive, but when disk utility was run on the internal hard drive, the disk utility eventually froze.
Based on this info, the guy there deduced (fairly reasonably I suppose) that the problem must be my hard drive, and replacing my hard drive should solve this. So bought a
Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
The equipment I now have to try and get my MacBook to work:
- An iMac 2.7 Ghz i5 (8gb Ram) running Mac OSX 10.7.5
- A replacement hard drive for the MacBook (Seagate Momentus)
- A SATA HArd drive USB docking station
- A 500gb iOmega Hard drive with Firewire 800 cables
- The 2 original install disks for Tiger that came with the MacBook Pro
- A working .dmg of retail snow leopard
What I have tried so far:
I have formatted the replacement hard drive correctly (GUID) for Mac OSX. If I turn the macbook pro on with the new hard drive in, a folder icon with a question mark in it flashes in the middle of the screen... If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics. When I hold option on start up, the 'Mac OSX Install Disk 1" is the only option available (the cd/dvd drive must be working if it recognises the disk here i assume?) but when I select it, it spins for a bit, then kernel panics.
My next approach was to try and create an installable and bootable version of an OSX on an external hard drive. (I have tried this with both the original Tiger install disk, and with the leopard.dmg)... I followed the readily available instructions online on how to do this, and was able to restore the first partion on the external hard drive with the OSX install disk image.... The problem I have then face is installing the osx onto the second partition.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
I thought this wouldn't matter, as I would be able to run the installer when I plugged the iOmega into my MacBook pro. The problem I now have is that the Macbook wont recogninise the iOmega when it is connected by firewire. It will only recognise it when connected by USB, but when I try and run the installer, it spins for a while then kernel panics. I believe this is because MacBook pros of this age will only run OSX Install/bootable through firewire.
So... hardware wise, could this be anything other than a problem with the hard drive? As we know the MacBook pro will boot from an external drive...
If anyone has actually managed to read this far into this incredibly boring, waffling description of my problem, I am already grateful, and if anyone can give any help or advice at all regarding this, I will be eternally in your debt....
Thank you

I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB)
The MacBook Pro 3,1
So I bought a Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
Right the standard hard drive (not the XT which is a hybrid and can be problematic)
a folder icon with a question mark in it flashes in the middle of the screen...
That's the firmware telling you it can't find the/a bootable OS.
The 2 original install disks for Tiger that came with the MacBook Pro
If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics
but when I select it, it spins for a bit, then kernel panics.
Your machines firmware was updated, it will only now boot from 10.6 either on a bootable USB thumb drive or via the white 10.6.3 retail disks you can get by calling Apple by phone.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
True. If the iMac could boot from the 10.6.3 disk, then you could install 10.6.3 via Firewire Target Disk Mode onto the other Mac if for instance the Superdrive didn't work.
MacBook pros of this age will only run OSX Install/bootable through firewire.
True.
Just order the 10.6.3 white retail disk from Apple via phone, forget 10.4 and 10.5 as they are not getting updates anyway.
However you can extract iLife from the 10.4/10.5 machine specific disks using Pacifist from CharlesSoft.
Follow these install instructions
How to erase and install Snow Leopard 10.6

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

How do I download mountain lion onto new hard drive

My IMac 2.4 mid 2007 was starting to get very slow in opening applications. I rebooted the machine, it displayed the apple and then a circle with a line through it and would go no further. I have put it down to the hard drive, and have purchased a new one. My question is, how do I install mountain lion that I have already purchased to the new hard drive. I would appreciate any help on the matter

You need to get your computer up to at least 10.6, using the original installer for your Mac, or a retail copy of 10.6.3. Then update to 10.6.8, and using the App Store, sign in with your AppleID, go to Purchases, and re-download and install 10.8.
Matt

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

Why didn't old e-mails transfer from old hard drive to new hard drive?

In 2007, I accessed e-mails thru Outlook Express. The new equipment I purchased last month does not support Outlook Express. I was told it was obsolete. I think this is why e-mail saved from 2007 to 2012 did not transfer to new equipment. I know years later, I began using Firefox as a browser and accessed e-mails from that site. Firefox did transfer to new equipment. So all I have is 3 months of 2012 e-mails to present. Has anyone else had this problem when buying a new computer, i.e. losing old e-mails that wouldn't or didn't transfer?
Solved!
Go to Solution.

yorkiegirl12 wrote:
In 2007, I accessed e-mails thru Outlook Express. The new equipment I purchased last month does not support Outlook Express.
Outlook Express was most likely configured to save your emails on your local hard drive. This means that unless you take some action to move them to "the cloud" or your new hard drive, they will remain on your old computer.
When you access your email through a web browser, such as Firefox or Internet explorer, the email stays "in the cloud." You can access your email from any computer any where with any web browser, as the email remains on the server and is not transferred to your local computer.
Do you still have your old computer with Outlook Express? What operating system (i.e. Windows XP, Windows 7, ...) is it running? I and others may be able to help you move your old email.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

New Hard Drive and Iphone Backups

Hi I am migrating to Windows 7 from Windows XP next week and I have purchased a new hard drive to install the new OS. My Itunes and Iphone backups are on the old windows XP hard drive which I want to wipe clean for future storage. How can I move to Win 7 without losing all of my contacts, music, apps etc that are currently on my Iphone 3G? Is there a way to move the iphone backup file to another location( ie: flash drive) before I install the new OS? Or is there a way to get the data that's on my Iphone to download to the newly installed Itunes/Windows 7 hard drive? Thanks I

The iPhone's backup does not include all content available on the iPhone. The backup does not include any iTunes content including 3rd party apps, and it doesn't include any photos transferred from your computer to your iPhone via the iTunes sync process.
All iTunes content including 3rd party apps is stored in an iTunes folder. You can copy the iTunes folder to your backup drive.
Contacts are designed to be synced with a supported application on your computer. This can be with Outlook 2003 or 2007 along with calendar events, or with the address book used by Outlook Express call Windows Contacts for contact info only.
If you copy the iTunes folder to a backup drive and place the iTunes folder in the same location after installing Windows 7, your iPhone should not be erased of all iTunes content with the first sync. All iPhone data is not erased regardless including contact info and calendar events. You also need to place all photos on your computer's hard drive on your backup drive especially any photos that were transferred to your iPhone via the iTunes sync process.

Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one

I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.

Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300                  </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09    </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name   OEMID Value   OEMTableID Value
APIC           DELL         M09
FACP           DELL         M09
HPET           DELL         M09
BOOT           DELL         M09
MCFG           DELL         M09
____           DELL         M09
ASF!           DELL         M09
TCPA
SLIC           DELL         M09
SSDT           PmRef       CpuPm
scott cohen

D I have to install a new hard drive on my computer in order to upgrade my computer

I have an older IMAC with Mac OSX 10.5.8 installed. I am unable to upgrade my software. Will installing a new hard drive enable me to me up to date?

No. In order to upgrade:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Now, you may need a new hard drive, but not to upgrade the OS unless your drive has no more free space left.

2007 macpro1,1 badblocks New hard drive?

Similar Messages

Maybe you are looking for