2007 MBP Running Hot and Freezing occasionally after 10.6.3

This is obviously not normal. Anyone else experiencing this or know of the cause or a fix?
It's gotten so hot I've resorted to placing a towel in my lap. iStat says the CPU is running at 148 degrees, all the time, with the GPU frequently hitting 160, and both fans are running full bore.
The freezes come and go, and usually only last for 20-30 seconds, but when they do pop up, they happen frequently, as many as 10 times per hour.
I don't think I am doing anything differently than I have always done. No new software, etc.
Thanks much in advance for any suggestions.

I don't have 10.6 on anything but I believe this works for SL. In Applications > Utilities you will find Activity Monitor (hereafter AM to avoid the extra typing). Launch it and look at its "Show" selector at the top of the window. By default, AM launches to "User Processes" and that seldom shows enough. Change it to "All Processes" to get a good look at the true background picture.
Look at the columns AM presents. Find the "%CPU" column and click on it to sort the list by usage. When the computer is idling (you've quit all applications so only the Finder is active), no process should be more than 4-6 percent (might be a little different in SL). Basically you're looking for things that are using double-digits of the CPU cycles when the computer seems to be at idle..
Processes with "mds" in the name are related to Spotlight indexing but don't run that often after the initial install. If "syslogd" is running at high numbers, something is writing a bunch of stuff to system.log. I had that happen on my MBP with the demo for the game "Prey." Even when the computer was only idling, the demo continued to write to the log file and ballooned it from its usual size of ~250K to over 60MB, and ran the heat up to boot. Deleting the demo and a restart cured that insanity.
I found a process related to Safari 4 called Safari Webpage Preview Fetcher that ran a lot. It's how Tops Sites gets page previews. I now avoid using Tops Sites, especially on our slower G4 Macs which constitute the majority of our household Mac-ness. That process really gummed the works in those older Macs, all running 10.4.11.
You might want to repeat the question in the Snow Leopard forums. Someone more familiar with SL may see a pattern in the shutdowns and stalls. The 10.6 forums are here:
http://discussions.apple.com/category.jspa?categoryID=263
Keep us posted.
Allan

Similar Messages

  • Mac suddenly running slow and freezing frequently after software update

    Hi, first post. I have recently wiped my hard drive after my new macbook pro started crashing frequently and suddenly running slow, however, it all seemed fine for a few days until I ran the software update, and after failing because it was unable to "expand", everything started running slowly and freezing left right and center.
    This is really grinding my gears, and I have been looking for solutions online for ages now, can anyone here help?

    coove wrote:
    I'm sure that my laptop isn't that broken since it is quite new (september).
    You are still under warranty.  Call Apple Care and get a case number.  
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • Macbook Pro running hot and freezing up

    When I open the Macbook, iCloud pops up for me to login, but won't accept a login.  When I cancel it, the login box appears again.  When I cancel it a second time, it disappears.  Within several minutes of starting to use Safari or Chrome, the computer freezes and heats up.  It does not happen in Safe Boot.
    I've reset SMC and PRAM.  Resetting SMC seemed to help for half a day then the problem resumed.
    The most recent time it started to heat up on 2/24/15 at 09:52:50 PM, Activity Monitor showed that Google Chrome Helper was using CPU at 100%.  I followed Linc Davis' instructions with the following output in Console:
    2/24/15 9:51:16.961 PM Google Chrome Helper[540]: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
    2/24/15 9:53:18.279 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[575]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    2/24/15 9:53:18.571 PM Console[217]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    I saved this to a TextEdit file, and doing so caused the computer to freeze so I could not run the Terminal diagnostic test suggested by Linc Davis in other posts.  I have run this diagnostic test at other times recently and can post one if that is helpful.

    Done.  Here is the output.  In case this is helpful, I booted in normal mode and the cpu went to 100% on 9/26/14 at 21:24:13.  The computer shut itself down.  I rebooted in safe mode and ran this diagnostic.
    Start time: 21:30:20 02/26/15
    Revision: 1249
    Model Identifier: MacBookPro10,2
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Boot Mode: Safe
    Time since boot: 2 minutes
    UID: 501
    Spotlight: Indexing and searching disabled
    Firewall: On
    DNS: 71.10.216.1
    Listeners
        cupsd: ipp
        kdc: kerberos
        launchd: afpovertcp
        launchd: microsoft-ds
    Wi-Fi
        Security: WPA Personal
    System caches/logs
        1775 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
    Diagnostic reports
        2015-02-01 LegacyFileVaultMessageTracer crash
        2015-02-07 Finder hang
        2015-02-07 LegacyFileVaultMessageTracer crash
        2015-02-07 com.apple.WebKit.WebContent crash
        2015-02-14 LegacyFileVaultMessageTracer crash
        2015-02-18 com.apple.AmbientDisplayAgent crash
        2015-02-18 smcFanControl crash
        2015-02-21 LegacyFileVaultMessageTracer crash x2
    HID errors: 26
    Shutdown codes
        -112 1
        -128 2
        -62 3
    Kernel log
        Feb 22 19:43:33 Google Chrome He (map: 0xffffff801b12b4b0) triggered DYLD shared region unnest for map: 0xffffff801b12b4b0, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 19:44:45 Google Chrome He (map: 0xffffff801b12b4b0) triggered DYLD shared region unnest for map: 0xffffff801b12b4b0, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 19:44:49 Google Chrome He (map: 0xffffff8018c75f00) triggered DYLD shared region unnest for map: 0xffffff8018c75f00, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 19:46:04 Google Chrome He (map: 0xffffff801d7180f0) triggered DYLD shared region unnest for map: 0xffffff801d7180f0, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 19:46:25 Google Chrome He (map: 0xffffff801d7180f0) triggered DYLD shared region unnest for map: 0xffffff801d7180f0, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 19:47:31 Google Chrome He (map: 0xffffff801d7180f0) triggered DYLD shared region unnest for map: 0xffffff801d7180f0, region 0x7fff8b600000->0x7fff8b800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:35 Google Chrome (map: 0xffffff8018889690) triggered DYLD shared region unnest for map: 0xffffff8018889690, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:35 Google Chrome He (map: 0xffffff8013c11b40) triggered DYLD shared region unnest for map: 0xffffff8013c11b40, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:35 Google Chrome He (map: 0xffffff8013624780) triggered DYLD shared region unnest for map: 0xffffff8013624780, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:35 Google Chrome He (map: 0xffffff8015dd3000) triggered DYLD shared region unnest for map: 0xffffff8015dd3000, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:36 Google Chrome He (map: 0xffffff801834e2d0) triggered DYLD shared region unnest for map: 0xffffff801834e2d0, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:36 Google Chrome He (map: 0xffffff8016265e10) triggered DYLD shared region unnest for map: 0xffffff8016265e10, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:36 Google Chrome He (map: 0xffffff8013caf1e0) triggered DYLD shared region unnest for map: 0xffffff8013caf1e0, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 20:55:52 Google Chrome He (map: 0xffffff80170c4960) triggered DYLD shared region unnest for map: 0xffffff80170c4960, region 0x7fff8f600000->0x7fff8f800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Feb 22 22:40:35 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
        Feb 24 07:45:05 PM notification timeout (pid 214, Google Chrome)
        Feb 24 20:56:09 Sleep failure code 0x00000000 0x18006500
        Feb 24 21:40:57 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
        Feb 24 21:57:48 Failed to load kext com.apple.driver.AppleHV (errCouldn't alloc class "AppleThunderboltIPService"
        Feb 24 22:45:43 Failed to open the file
        Feb 24 23:55:51 error 0xe00002db opening hibernation file
        Feb 24 23:55:51 hibernate file close due timeout
        Feb 25 19:32:01 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
        Feb 26 21:16:20 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
        Feb 26 21:19:48 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    System log
        Feb 26 21:30:01 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:30:11 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:30:11 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:30:11 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:30:21 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:30:21 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:30:21 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:30:31 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:30:31 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:30:31 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:30:41 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:30:41 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:30:41 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:30:52 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:30:52 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:30:52 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:31:02 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:31:02 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:31:02 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:31:12 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:31:12 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:31:12 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
        Feb 26 21:31:22 watchdogd:  [watchdog_daemon] @(    wd_watchdog_open) - IOIteratorNext failed (kr=0)
        Feb 26 21:31:22 watchdogd:  [watchdog_daemon] @(      wd_daemon_init) - could not initialize the hardware watchdog
        Feb 26 21:31:22 watchdogd:  [watchdog_daemon] @(                main) - cannot initialize the watchdog service
    Console log
        /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/../../../../../Frameworks//ENSharedUtilities.framewor k/Versions/A/ENSharedUtilities: open() failed with errno=1
        Feb 22 22:10:23 ReportCrash: Invoking spindump for pid=504 wakeups_rate=157 duration=287 because of excessive wakeups
        Feb 22 22:39:11 fontd: Failed to open read-only database, regenerating DB
        Feb 24 06:11:42 mdworker: Error loading /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter:  dlopen(/Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightI mporter.mdimporter/Contents/MacOS/EvernoteSpotlightImporter, 262): Library not loaded: @rpath/ENSharedUtilities.framework/Versions/A/ENSharedUtilities
         Referenced from: /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter
         Reason: no suitable image found.  Did find:
        /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/../../../../../Frameworks//ENSharedUtilities.framewor k/Versions/A/ENSharedUtilities: open() failed with errno=1
        Feb 24 20:57:01 mdworker: Error loading /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter:  dlopen(/Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightI mporter.mdimporter/Contents/MacOS/EvernoteSpotlightImporter, 262): Library not loaded: @rpath/ENSharedUtilities.framework/Versions/A/ENSharedUtilities
         Referenced from: /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter
         Reason: no suitable image found.  Did find:
        /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/../../../../../Frameworks//ENSharedUtilities.framewor k/Versions/A/ENSharedUtilities: open() failed with errno=1
        Feb 24 20:57:31 mdworker: Error loading /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter:  dlopen(/Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightI mporter.mdimporter/Contents/MacOS/EvernoteSpotlightImporter, 262): Library not loaded: @rpath/ENSharedUtilities.framework/Versions/A/ENSharedUtilities
         Referenced from: /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter
         Reason: no suitable image found.  Did find:
        /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/../../../../../Frameworks//ENSharedUtilities.framewor k/Versions/A/ENSharedUtilities: open() failed with errno=1
        Feb 24 21:05:16 mdworker: Error loading /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter:  dlopen(/Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightI mporter.mdimporter/Contents/MacOS/EvernoteSpotlightImporter, 262): Library not loaded: @rpath/ENSharedUtilities.framework/Versions/A/ENSharedUtilities
         Referenced from: /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/EvernoteSpotlightImporter
         Reason: no suitable image found.  Did find:
        /Applications/Evernote.app/Contents/Library/Spotlight/EvernoteSpotlightImporter .mdimporter/Contents/MacOS/../../../../../Frameworks//ENSharedUtilities.framewor k/Versions/A/ENSharedUtilities: open() failed with errno=1
        Feb 24 21:39:27 fontd: Failed to open read-only database, regenerating DB
        Feb 24 21:54:48 ReportCrash: Invoking spindump for pid=540 wakeups_rate=185 duration=244 because of excessive wakeups
        Feb 25 09:51:18 ReportCrash: Invoking spindump for pid=332 wakeups_rate=237 duration=190 because of excessive wakeups
        Feb 25 19:29:44 fontd: Failed to open read-only database, regenerating DB
        Feb 26 21:14:36 fontd: Failed to open read-only database, regenerating DB
        Feb 26 21:24:52 ReportCrash: Invoking spindump for pid=218 wakeups_rate=467 duration=97 because of excessive wakeups
    Daemons
        com.apple.spindump
        - status: 75
        com.apple.watchdogd
        com.apple.xprotectupdater
        - status: 78
    User login items
        smcFanControl
        - /Applications/smcfancontrol/smcFanControl.app
        iTunesHelper
        - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
    Safari extensions
        AdBlock
        - com.betafish.adblockforsafari
        clea.nr Videos
        - com.CleanYouTube200okconsulting.safariextension
    iCloud errors
        bird 40
    Continuity errors
        sharingd 24
    Restricted files: 62
    Lockfiles: 4
    Contents of /Library/LaunchAgents/com.brother.LOGINserver.plist
        - mod date: Nov 21 01:46:43 2014
        - checksum: 1383871077
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>OnDemand</key>
        <false/>
        <key>Label</key>
        <string>com.brother.LOGINserver</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Printers/Brother/Utilities/Server/LOGINserver.app/Contents/Mac OS/LOGINserver</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
        - mod date: Oct 22 15:24:25 2013
        - checksum: 1591517921
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist
        - mod date: Oct 22 15:24:25 2013
        - checksum: 676087606
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist
        - mod date: Oct 22 15:24:25 2013
        - checksum: 1445213025
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
        ...and 8 more line(s)
    Contents of /Library/LaunchDaemons/com.bluecoat.k9filter.plist
        - mod date: Sep 16 08:20:06 2014
        - checksum: 2403819504
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <dict>
        <key>NetworkState</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.bluecoat.k9filter</string>
        <key>OnDemand</key>
        <false/>
        <key>Program</key>
        <string>/opt/.bluecoat-k9/bin/k9filter</string>
        <key>ProgramArguments</key>
        <array>
        <string>/opt/.bluecoat-k9/bin/k9filter</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>WorkingDirectory</key>
        <string>/opt/.bluecoat-k9/bin</string>
        </dict>
        </plist>
    Contents of /System/Library/LaunchDaemons/com.apple.xprotectupdater.plist
        - mod date: Oct 28 21:58:47 2014
        - checksum: 772155910
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.apple.xprotectupdater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/libexec/XProtectUpdater</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>1</integer>
        <key>Minute</key>
        <integer>22</integer>
        </dict>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
        - mod date: Feb 19 06:54:57 2015
        - checksum: 1654663514
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        </dict>
        </plist>
    Extensions
        /Library/Extensions/bckd.kext
        - com.bluecoat.kext.bckd
    Frameworks
        /Library/Frameworks/BCC_OCR.framework
        - com.yourcompany.BCC_OCR
        /Library/Frameworks/OCRFramework.framework
        - com.newsoft.OCRFramework
    PrefPane
        /Library/PreferencePanes/Flash Player.prefPane
        - com.adobe.flashplayerpreferences
        /Library/PreferencePanes/K9PrefPane.prefPane
        - com.bluecoat.k9filter.prefpanel
    Installations
        Evernote: 11/24/14, 9:52 PM
        Adobe Flash Player: 11/11/14, 9:20 PM
        Adobe Flash Player: 11/7/14, 3:57 PM
        Citrix Receiver: 10/30/14, 9:38 PM
        K9 Web Protection: 10/29/14, 9:19 PM
    Elapsed time (sec): 364

  • Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

    Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

    I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

  • My Mac Book Pro runs hot and then freezes up I have to restart it and keep it cool with a fan

    My MacBook Pro runs hot and then freezes up, I have to restart it and keep it cool with a fan on the battery

    Runaway applications can shorten battery runtime, affect performance, and increase heat and fan acti…
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • MacBook Pro running slow and freezing--Installed OnyX

    I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

    I am having problems with my MacBook Pro. For a while I was using Safari and getting the beachball A LOT. So, I switched to Chrome. For the past two days it has been running slow and freezing...when typing it would freeze and a few seconds later it would resume and the letters I typed would appear. After reading forums, I did the repair disk permissions. Nothing changed. I downloaded OnyX. After executing two tasks under cleaning..I believe System and User, it is already running better and hasn't froze once. My question is...which tasks should I perform on OnyX? I read somewhere that not all of them should be done. Like I said, I only did 2 and then stopped. I'm kind of over my head and don't want to screw anything up or do anything that doesn't need to be done. Any help would be appreciated.

  • Pb runs hot and loud., doesn't sleep.

    I just sent my pb into apple to replace the combo drive (thanks applecare!) and when I got it back, I noticed that its been running hot and loud. The upper-left portion of the keyboard is quite warm, and the fan seems to be constantly running. Even if I walk away for 15 or 20 minutes, I'll come back to it still on. When I manually put the computer to sleep, the fan turns off and screen goes blank. After a a few seconds, the drive makes a noise like its ejecting a disc, the screen comes back on, and the fan starts up again.
    I'm going to call Apple about it, but I just wanted to know if anyone had any similiar problems or ideas about what might be going on?

    Mine is still fairly new as I picked it up off ebay a couple weeks ago brand new. So I don't know when it was actually manufactured. The part of the noise that gets under my skin is that soft but constant background whining coming from the CPU fan. It doesn't really sound like anything rubbing or a bad bearing, just the sound that an electric motor makes. But, it just seems to resonate from the lower left hand side where the air intake is.
    So quite accidentally one day I held my hand under the left hand side and it completely muffled the whine sound. You could still here the hum and the sound of air but the irritating element was gone. Playing around a little more, I opted to tape a business card under that lower left hand corner, bridging the gap from front to back to still allow an airspace for the fan's suction. It knocks out about 90% of the whine.
    It's been running that way for two weeks with no ill effects. Yes, the fan speeds up and slows down when needed. Normal at rest RPM is 1500 and mid to upper 50's on the temp. The highest temp I've seen under max continuous load is 65 with the fan at 4000 rpm.
    I did experiment with something longer than the business card but I did then see a decrease in cooling capability. The isight models have their suction ducted out the back and I bet that gets rid of that resonance.
    So all in all it still makes less fan noise than my old B&W, it's just that the B&W wasn't up on the desk so close to our heads. But, If your fans are constantly on high, there is a procedure for resetting something in power management, I just can't find it right now. Hope this helps.

  • MBP running hot when connected to Cinema Display

    I have a 2.33 MBP that I use for work and at home. I also have a 23 inch Cinema display on my desk at home. I have noticed that when I have my MBP connect to the Cinema and the screen on the MBP closed it runs hot and the fans never seem to stop running. I was wondering if anyone has seen the same thing and if so what they have done to resolve the issues. I have had looked at the laptop coolers that go under the laptop and that powers the fans off an USB port, but I really like my desk clean and don't want to add something else to it. Any ideas or suggestions would be great.
    Thanks
    Matt

    Try running with the lid open and see it temps drop.

  • Iphone 5s getting hot and freezing

    after apple released the 8.1.2 software update my iphone 5s is getting hot and freezing.. sometimes when trying to call someone it wont show the phone function. while the call is being made so there's no way to hangup the phone call

    Hello Y2murilo11,
    Welcome to Apple Support Communities.
    It sounds like your iPhone is getting warm and intermittently stops responding. Take a look at the article linked below, it provides troubleshooting suggestions that’ll resolve issues like the one that you've described.
    iOS: Not responding or does not turn on - Apple Support
    Also, you can find a lot of great information about the devices operating temperature and what happens when it exceeds a certain temperature threshold here:
    Keeping iPhone, iPad, and iPod touch within acceptable operating temperatures - Apple Support
    Ciao,
    -Jason

  • Macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    You could use the free tool iStat Pro to see what changes when you connect your MBA to the display. Without doing anything the CPU pane should show a high percentage for "Idle". If the idle value is too low, launch the Activity Monitor and sort by CPU usage. There is a pane showing the different temperatures of your computer. Watch them for a few minutes after connecting the display.

  • HT2353 Macbook Pro running slow and freezing

    So it just started yesterday running slow and freezing. I'm starting to get very frustrated. I research to see what could be the problem. I saw people suggesting that it could be the storage. My storage is 464.75 free out of 499.25. I just brought this computer last year on christmas. I thought it could be adblock but it never cause me problems but I paused the app and it still doesn't work. What is wrong? Should I restart the computer? If I do how can I backup my things? Also i'm really not a computer person so if you can describe to me the problem in layman terms that'll be great!
    OS X Mountain Lion 10.8.4
    OH! and it's not just safari that's going slow but itunes,word,etc

    Hello,
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

  • Recently started running slow and freezing up while loading web pages etc.

    Problem description:
    Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
    EtreCheck version: 2.1.2 (105)
    Report generated December 15, 2014 at 9:58:50 AM MST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:10:42
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/launchd.conf - Exists
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
    Launch Agents: ℹ️
      [running] com.amazon.sendtokindle.launcher.plist [Support]
      [running] com.robohippo.HippoConnectAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ℹ️
      Omnibar Adware! [Remove]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          17% mds
          6% WindowServer
          0% AppleSpell
          0% fontd
          0% mds_stores
    Top Processes by Memory: ℹ️
      120 MB Safari
      77 MB mds_stores
      69 MB com.apple.WebKit.WebContent
      60 MB ocspd
      60 MB WindowServer
    Virtual Memory Information: ℹ️
      1.24 GB Free RAM
      1.15 GB Active RAM
      853 MB Inactive RAM
      1.05 GB Wired RAM
      1.00 GB Page-ins
      25 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 09:48:45 AM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • 17" iMac G5 2GHz (ALS but no iSight) runs hot and LOUD fans

    Hi all,
    I love my iMac. I've had it for nearly 8 months now. From day 1, I've been surprised by how loud it is under any significant CPU load. Unfortunately for me, I have waited until I'm well out of my phone support window to do anything about it. I have not yet purchased AppleCare.
    As I type this, my CPU temp is 70 degrees C and fan is running at 2600 RPM, running nothing beyond the browser in which I'm typing. Should I attempt to work in iMovie and render said work to DVD (the reason I bought the machine), CPU temp will climb to ~76 and fan speed jumps to 4600-4800 RPM. At this speed, the noise is unbearable...but it is annoying even when idle.
    Can any of you with this model of 17" iMac comment on your experience? Do these numbers and this experience sound normal? I know I'm not alone in this complaint, but I can't tell how widespread the problem is or whether my machine is normal or defective. I've been told by my local service center (CompUSA) that every single 17" iMac of this revision runs hot and has loud fans, and that there is nothing I can do short of complaining to Apple in the hopes of getting a replacement of a later revision. I was told by a "genius" at a different Apple store that my machine sounded about like he'd expect.
    I'm getting a system board replacement tomorrow, but have been told not to expect it to make a significant difference. I figure I must do it before Apple would consider further action.
    Any advice at all will be greatly appreciated. Sorry for the long message...
    Thanks,
    ctcaldwell
    iMac G5 17" Mac OS X (10.4.5)

    Mine is still fairly new as I picked it up off ebay a couple weeks ago brand new. So I don't know when it was actually manufactured. The part of the noise that gets under my skin is that soft but constant background whining coming from the CPU fan. It doesn't really sound like anything rubbing or a bad bearing, just the sound that an electric motor makes. But, it just seems to resonate from the lower left hand side where the air intake is.
    So quite accidentally one day I held my hand under the left hand side and it completely muffled the whine sound. You could still here the hum and the sound of air but the irritating element was gone. Playing around a little more, I opted to tape a business card under that lower left hand corner, bridging the gap from front to back to still allow an airspace for the fan's suction. It knocks out about 90% of the whine.
    It's been running that way for two weeks with no ill effects. Yes, the fan speeds up and slows down when needed. Normal at rest RPM is 1500 and mid to upper 50's on the temp. The highest temp I've seen under max continuous load is 65 with the fan at 4000 rpm.
    I did experiment with something longer than the business card but I did then see a decrease in cooling capability. The isight models have their suction ducted out the back and I bet that gets rid of that resonance.
    So all in all it still makes less fan noise than my old B&W, it's just that the B&W wasn't up on the desk so close to our heads. But, If your fans are constantly on high, there is a procedure for resetting something in power management, I just can't find it right now. Hope this helps.

  • My 4s is running hot and keeps jumping off and on

    my 4s is running hot and keeps jumping off and on

    Thanks for sharing.
    Are you asking for technical support help?  If so, what have you done thus far to troubleshoot your issue?

  • Mac book pro runs hot and restarts

    my mac book pro 13 in 2009 modle  runs hot and randomly restarts. the fan is operable. 

    Runaway applications can shorten battery runtime, affect performance, and increase heat and fan acti…
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

Maybe you are looking for