2007A SP01 PL10 not installing on Windows Server 2003 ?

Hi all:
Yesterday 2007A SP01 PL10 was released. Trying to keep our customer's installations current, I proceeded to try and install the patch on different systems. So far I was lucky with Windows XP and Windows Server 2008 trial installations. However, on all the Windows Server 2003 installations I have tried (OS patched completely), the COMMON database upgrade either closes without error message, or opens up a debug message with no error number or description after clicking the very first "Next" button in the installation program.
Has anybody seen the same effect anywhere? Has anybody been able to successfully install PL10 on a Windows Server 2003? Are there any known issues?
Thanks,
Joerg.

Hi,
I got the same answer to my support call for my error messages. We are loading that patch and will attempt again. Ironically, I had looked at the same note, and even bookmarked it becuase of the slow 8.8 client upgrade thread, but I didn't think the two were related.
The note indicates only that SAP Business One does not start after patch file application.
"You might encounter one of the following situations after having applied a new SAP Business One patch file:
Your SAP Business One system fails to start after you have applied a new SAP Business One patch file that you downloaded from SAP Service Marketplace.
If you want to find out whether you are affected by this problem, refer to section "Detecting whether SAP will not start up due to missing MS patch" in the attached PDF document.
Your SAP Business One system runs fine but you did not apply the Microsoft security fix mentioned above. However, future downloads of SAP binaries from SAP Service Marketplace might not work (depending on release, etc.)."
If it is also affecting the installation of patches (i.e SAP runs fine, but you can't run a patch installer) the message should also indicate that so that people will know to use this fix in the future.
Hopefully I too will have a resolved issue. I'll post the results.
Daryl

Similar Messages

Latest version not getting installed in Windows Server 2003 SP@

check the download is good
Spiceworks MD5 Checksum: 7954b4e9ded9f7afff01212eaa4ad822

Hi,
I had the old version of SpiceWorks working fine on Windows Server 2003 SP2 & thought of upgrading the version to 7.4. When i double click on the downloaded setup, the windows hour glass would show up for few seconds & nothing was happening. Thinking that this was due to old version, i uninstalled it completely & removed the installed directories. Even then i am unable to install the latest version & not finding the source for old version.
Please help.
Regards
Murali S L
This topic first appeared in the Spiceworks Community

Instant Client not working on Windows Server 2003

Hi everybody,
I have installed the Instant Client libraries on a machine running Windows Server 2003 in order to connect to a remote Oracle server. I also installed the sqlplus package. I copied them in a local directory, updated the Environment variable PATH and restarted. When I try to execute sqlplus to test if everything works fine, I get the following errors:
sqlplus user/[email protected]:1521/orcl
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
Also, when I try to use PHP OCI8 functions like oci_connect() I get an error like:
PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
I checked it and the PATH variable points to the instant client libraries.
Any ideas?
Thanks in advance!

I get the following errors: sqlplus user/[email protected]:1521/orcl SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly Also, when I try to use PHP OCI8 functions like oci_connect......Like the error suggested, the instant client libraries does not include the Network Service required by SQLPLUS.
The connect string you are trying to use doesn't work for SQLPLUS. SQLPLUS will need proper TNS names configured.
In another words, instanct client libraries installation is not enough to use sqlplus. Use Runtime installation or Customized installation.

Install On Windows Server 2003

I download Oracle 9i release 2 for windows server 2003 from http://otn.oracle.com/software/products/oracle9i/htdocs/win2k3soft.html. After extracting the zip files I dont see an install files. The files that I downloaded look like they are for a patch. I have installed oracle clients for windows but have not done a full install yet. Any help would be great.
thanks,
zack

NO autorun folder like all of the other oracle installations I have done.
When I first unzip the downloaded file it makes a zip file named: 9203_nt_release_redo.zip and a Readme file about "Oracle 9i Release 2 Database Server Patch Set 2". After unziping the redo zip file it creates a Disk 1 folder that has the following folders: preinstall_rac, response, stage, and a file patch_note.htm.

Safari does not run at Windows Server 2003

Any page I try to open at Safari, it just crashes (I mean, just closes) without any technical information.
The most intersting fact is that when I go to preferences, just in the appearance tab make Safari close.
And the most important fact is that I use Microsoft Windows Server 2003 R2 en-us. I NEVER was able to use Safari in any 2003 (since first Safari beta). I've tryed Safari in several of my 2003 machines (at least 4 very different ones). I got better in new versions (first Safari ones didn't even openup)
I'v tryed so many things. Rename several folders, like safari.resources, run Microsoft Application Verifier to fool it as Windows XP, startup some services (like themes or Bonjour -- wich I use to disable), no solution at all. My sixt sense tells me that is is anything to do with some graphics rendering conflict, since it closes in the appearance and Safari have a different look from a regular Windows app window.
Bottom line: any help ?

The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
Just for the records:
Safari prefs in my Windows live happy in:
C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
So, it must be some stuff, some little tricky service or software I install in my usual Windows.
Anyway, thank you very much...
If someone have some clue, I'll apreciate

Zdm won't install on Windows Server 2003

Hi,
I'm having the exact problem outlined in TID10098058. I'm trying to install
Zen Desktop management on Windows Server 2003 with sp1 and the install is
failing due to the error 'Error: copying files to server. Be sure that no
ZENworks Desktop Management files are open or locked'
Edirectory was installed on C drive and not on any other drive. The only
thing that I can think of is that the server a virtual server hosted on
VMWARE ESX Server 2.5. Could this be the problem?
thanks for your help.
Liz

On Fri, 01 Sep 2006 04:15:18 GMT, [email protected] wrote:
> Edirectory was installed on C drive and not on any other drive. The only
> thing that I can think of is that the server a virtual server hosted on
> VMWARE ESX Server 2.5. Could this be the problem?
not really... Please enable debugging via:
http://support.novell.com/cgi-bin/se...?/10093312.htm
and try the install again..
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Can WebObjects 5.2 or 5.2.4 installing on Windows Server 2003 ?

Regarding to the topic above, i tried to install completely, even tried also update to version 5.2.4, but i found that one of the services still fail in loading, open.exe
The error msg pop-out: " invoker error", and the log stated that openexec is hung in starting. Meanwhile, my suspicion on this happen might be that "open.exe" is NOT support on 64-bit of the Windows OS, which is Windows Server 2003 instead of Windows 2000, which only 32-bit.
So, any idea or solution to solve this matter?
Hope can get your suggestion soonest !!!
Thanks !!!

I don't think that it is related to the windows server 2003 R2 because it is supported if it is a standard edition.
installation guide for ACS 4.2: http://tiny.cc/xm3ekw
What is not supported is windows 2003 x64.
It is either you don't have R2 standard edition or the problem is something else. IMHO I think that ACS will be able to be instealled correclty with R2 enterprise edition as well.
Rating useful replies is more useful than saying "Thank you"

SQL Server 2005 SP4 not installing correct on Server 2003

Everytime I attempt to install SP4 on my Server 2003 system it states it goes through successfully but when I reboot it hasn't done anything.
Summary Log states all is successful for version 9.00.5000.00 (0 Errors, SQL Support: Passed, Summary: Successful)
after reboot or even before the sqlserver.exe shows its still version 9.00.4262.00 and still shows up in Microsoft updates and doesn't show the install at all in Add/Remove Programs
I'm at a complete loss on what to do.. I've tried the RTM download and the Auto Update method both with same results. Tried shutting down all services in relation as well. I'm lost

Time: 01/30/2015 14:24:13.797
KB Number: KB2463332
Machine: *CLEARED*
OS Version: Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 4
Package Version: 5000
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected                         Language Level Patch Level       Platform Edition
Setup Support Files                       ENU
9.4.5000 x86
SQL Server Native Client                  ENU                 9.00.5000.00 x86
SQLXML4                                   ENU
9.00.5000.00 x86
Backward Compatibility                    ENU                    8.05.2312
x86
Microsoft SQL Server VSS Writer           ENU                 9.00.5000.00 x86
Products Disqualified & Reason
Product                                   Reason
Processes Locking Files
Process Name          Feature               Type          User Name
PID
Product Installation Status
Product                   : Setup Support Files
Product Version (Previous): 5000
Product Version (Final)   : 5000
Status                    : Success
Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB2463332_SqlSupport.msi.log
Error Number              : 0
Error Description         :
Product                   : SQL Server Native Client
Product Version (Previous): 5000
Product Version (Final)   : 5000
Status                    : Success
Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB2463332_sqlncli.msi.log
Error Number              : 0
Error Description         :
Product                   : SQLXML4
Product Version (Previous): 5000
Product Version (Final)   : 5000
Status                    : Success
Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB2463332_sqlxml4.msi.log
Error Number              : 0
Error Description         :
Product                   : Backward Compatibility
Product Version (Previous): 2312
Product Version (Final)   : 2312
Status                    : Success
Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB2463332_SQLServer2005_BC.msi.log
Error Number              : 0
Error Description         :
Product                   : Microsoft SQL Server VSS Writer
Product Version (Previous): 5000
Product Version (Final)   : 5000
Status                    : Success
Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB2463332_SqlWriter.msi.log
Error Number              : 0
Error Description         :
Summary
     Success
     Exit Code Returned: 0

Indesign Server CS4 service is not starting on Windows Server 2003 64bit

Hello guys,
I am not able to start Indesign Server CS4 service on windows Server 2003 SP2 64bit .
I have successfuly configured the service with InDesignServerService.msc, set the port to 18555. InDesignServerWinService the Log On option is set to "This Account". Also tried using different accounts!
When starting the indesign service from windows Service control panel I get this error:
Could not start the InDesignServerService x64 service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Error log from windows Event viewer:
Error
Timeout (30000 milliseconds) waiting for the InDesignServerService x64 service to connect.
Indesign server application works if launching from command line with the specified port 18555.
If trying to lauch IndesignServerService.exe from command line, there is a delay and finally nothing happens.
I have also tried launching 32bit indesign server service and the same error comes.
Would be grateful for your thoughts!
Message was edited by: Andrewdev
Server specs:
Windows Server 2003
Standard x64 Edition
Service Pack 2
Intel Xeon CPU 3.00Ghz
9.76 GB of Ram
Server is running virtualy on Xen hypervisor, there is no antivirus and windows firewall is disabled.

Hi Chandi,
      If Microsoft fix is not working or it is too old to apply then go for manual process i.e.;
      In the Microsoft KB article follow this :-
     Services that use the local system account to log on to a Windows Server 2003-based computer start if the Allow service to interact with desktop
     option is turned on. To turn this option on, follow these steps:
In the Services tool, click the service that you want to start, and then click Properties.
Right-click the Log On tab, and then click to select the Allow service to interact with desktop check box.
Click OK to exit the Properties dialog box.
   This will solve your problem.
   Thanks,
   Akansh Upadhyaya,
   System Engineer,
   (Windows + Unix.)

10g application server install on windows server 2003

already installed on my pc oralce 9i database and oralce 6i
now I m installing 10g application server on windows server 2003 but geeting error, when I click on setup button
Error:
checking swap space : 1488mb Available, 1535 mb required . Failed
please guide me

got it ... increased virtual memroy size 1550...

[CS4 Server Win]: Plugin does not run on Windows Server 2003?

Hi,
can anybody help?
My plugin is running on Windows XP and Windows Vista.
On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 my plugin is not running, the scripting methods are not visible in ExtendScript Toolkit!
What is missing?
Thanks,
Alois Blaimer

> I am using Visual Studio 2008 with the VC++ 9.0 compiler.
> Could this be a problem?
Yes.
CS4: use VC2005 + SP1
CS3: use VC2005 without SP1
CS2: use VC2003
In my previous post I described one of the problems I found out the hard way - walking around in disassembler is a pain, even more Intel and Windows, comparing to Mac, and PowerPC. Since then I only use the official tools even if others tell it worked for them, and I keep the InDesign installations for final build and test on the earliest supported operating system.
Dirk

Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it.

SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2

I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.

Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com

InDesignServer Service not starting on Windows Server 2003 (32bit & 64 bit)

Note: this issue is different from this thread on a similar issue.
This problem has plagued me for weeks and I finally give up. InDesign Server installs successfully and the InDesignServerService starts, but the server does not run. I can only run the server from the command line. I've followed these installation instructions but run into the following problems:
1. installing by the command line: InDesignServerService /install fails and produces the following error log:
Installing service InDesignServerService...
Creating EventLog source InDesignServerService in log Application...
Rolling back assembly 'E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.exe'.
Affected parameters are:
   logtoconsole =
   assemblypath = E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.exe
   logfile = E:\Program Files\Adobe InDesign CS4 Server\InDesignServerService.InstallLog
Restoring event log to previous state for source InDesignServerService.
2. I cannot install or load the snap-in to MMC. When I try to install regsvr32 InDesignServerMMC.dll it cannot be found (as it's not in the InDesign Server directory). However InDesignServerMMC64.dll is in there and I was able to load the snap-in using regsvr32 InDesignServerMMC.dll, but the server still only runs when being started from the command line.
As I mentioned, InDesign Server runs fine when I have an active command line window open and run InDesignServer, but the moment I close the command line window, the server shuts down. Any ideas?

Well, when you run it using command line if you close the command line, of course that servers going to shutdown. So, if you wanna run without any extra window opened, you have to start your service. Go to the windows service window (administrative tools) and start the service (it's installed automatically).
Is your O.S. 32 or 64 bits? If it's 32 you install the wrong application, you have to install the compatible version with your O.S.
If you installed correctly, you can try up the service using the follow command in you prompt.
net start InDesignServerService (in this case you can close window when successefull menssages appear)
Cya

Oracle not working with windows server 2003

After upgrading from windows 2000 with oracle 8i to windows 2003 server I have tried 8i, 9i and now 10g with no success. I can not connect to the oracle database. Using the oracle net configuration assistant and through my asp pages I get the following error:
ORA-12170:TNS Connect timeout occurred
I can TNSPING the database.
Any assistance would be greatly appreciated.

The server is in the DMZ.
Protected by a microsoft ISA Firewall.
A Windows 2000 machine with the same Oracle version can see the database through the same Firewall.
We can talk to the database using SQLplus but not using IIS or testing using the Oracle net Configuration tool.
the only other factor that might be relevent is that it takes two attempts to connect with SQL plus. the first always gives a connection timeout.
Despite this none of these problems are present on a Windows 200k server

2007A SP01 PL10 not installing on Windows Server 2003 ?

Similar Messages

Maybe you are looking for