2008 - How to make the SATA drives run full speed with Bootcamp and XP ?

Has anyone found a way - after all this time - of repairing a 2006 install of Windows XP SP2 - or in someway fixing the rather slow SATA drive problems?
I have not upgraded to 10.5 - but would if the new Bootcamp somehow (via new drivers??) fixed the problem!
My machine is now 2 years old ( 2.66 4 core ) and I finally need XP's full speed for a project - but most of the posts I've seen are fro 2006 and expired.
Help!
-Glen

And again, my objective to is get 'full speed' from the SATA drives while running XP.
-Glen

Similar Messages

HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable? The article referenced is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable? The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options. How do you make it bootable?

If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
You have two or three options (depending on your Mac Model).
1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
2. Download Software from Apple servers...
3. Install Windows...
Are any additional instructions really necessary?

How to make the spacing between menu items equal with varied menu item sizes

If the title isn't clear, what I mean is how do you make the space between each of the items in a horizontal the same when some of the menu items are up to double the size of others. Currently I am using the margin property and the space between the larger items is smaller than between the smaller items.
If you need more information just ask.

Screenshots don't tell the whole story which is contained in your HTML and CSS code.
Without a link to your test page or a look at your code (all of it) the best we can provide is wild guesses.
Help us help YOU by providing a link.
HOW IMPORTANT IS CODE? A Plea to new posters.
http://forums.adobe.com/thread/691654?tstart=0
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to make the join condition in a view with this tables LFBK LFA1 TIBAN?

Hi gurus,
how can I make the join conditions for those 4 tables LFBK LFA1 TIBAN and BNKA ?
thanx
Moderator message: please (re)search and try yourself first.
Edited by: Thomas Zloch on Nov 22, 2010 4:44 PM

Well, use
LFA1-LIFNR EQ LFBK-LIFNR
LFBK-BANKS EQ BNKA-BANKS
LFBK-BANKK EQ BNKA-BANKK
LFBK-BANKS EQ TIBAN-BANKS
LFBK-BANKK EQ TIBAN-BANKK
LFBK-BANKN EQ TIBAN-BANKN
LFBK-BKONT EQ TIBAN-BKONT
Not very hard...
Regards,
Raymond

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

How to make the commitment item field as display in PR and PO

Hi,
Our user want the 'Commitment Item' filed should only be diplayed while making PR and PO. Please suggest what to do.
Shall, I make the field surpass for that FSG and it will show as surpass in all the enjoy transactions or there is something else I should do..
Thanks in advance
Regards
Nitin

Thanks for your reply ELI!!!
Actually, users are changing the commitment items and that's why finance people are facing the problems so they have requested to mark the Commitment item field in a display mode.
Please telll me the t. code or the path where to do this as I am not an MM consultant and he has left recently I have been asked to do it.
Thanks in advance...
Regards
Nitin

How to make the OAF app run in a DB instance while it has got developed in

Hi All,
I have developed my Req in OAF and its working fine in my local. I have also deployed the files and its working fine. But now we have to deploy it in anotther DB instance. In my local I have put the new DBC file and change the Project settings but still its not working. Can anybody pls help me out in this Issue?
With Thanks
Kumar Gautam

Not working means? are you getting any error?
If yes, post the error stack.
--Prasanna

How to install latest ATI drivers for iMac 2011 with BootCamp and Windows 7?

Hi,
i want to install the latest ATI / AMD drivers for my brand new iMac 2011 6970M 2GB under windows 7 to play GAMES (<- one of the reasons to buy a new mac)
What I tried:
1.: Update with latest mobilty driver vom amd. -> doesn't work.
2.: Uninstall all amd software (driver sweeper)
Install the latest drivers... -> doesn't work.
What should i do? Buy a PC?
thx

I installed other driver and it works fine for me. :
http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-6-display-drivers-notebooks-15-06-2011-a.html
ATI 11.6 Catalyst drivers...
Thx for help.

How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

Hi Experts,
I need help.
I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only) even in Display mode. How to make the field is non editable in display mode and editable in change mode.
I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
How to make this field to behave as standard fields?
Please reply me <removed by moderator>
Thank you in advance.
Best Regards,
Divakar.
Edited by: Thomas Zloch on Mar 2, 2012

If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
lv_changeable = im_header->is_changeable( ).
LOOP AT ch_fieldselection ASSIGNING <fs>
    IF lv_changeable IS INITIAL.
      <fs>-fieldstatus = '*'. " Display
    ELSE.
      <fs>-fieldstatus = '+'. " Change
    ENDIF.
endloop.

CPU fan running full speed after 15 minutes

My 3 month old iMac 24" has just started having fan problems.
Before I went away on a training course, it was working fine. Left it switched off at the outlet for 3 days, now the CPU fan runs full speed after the iMac has been switched on for 15 to 20 minutes.
CPU temp is 24C, CPU heatsink is 28C. Ambient is 17C. CPU fan is 3600rpm. Other fans are normal.
CPU usage is less that 10%. Only Safari is running.
I've tried resetting the SMC - left all plugs disconnected for 15 minutes, reconnected mains power for 15 minutes, reconnected USB, then switched on.
Still the same - OK for 15 minutes, then CPU fan runs full speed.
Anything else that I can try?

I tried again, following your instructions exactly. It seemed to work, running normally for about an hour.
I left all the USB devices unplugged, except for the keyboard and mouse.
I then shut the iMac down, but left the mains power turned on at the wall. When I switched it on again 2 hours later, all was OK for 15 minutes, then the CPU fan ran at full speed.
Shutting down for a few seconds fixes it for another 15 minutes.
I'm wondering if it's a software problem, although I haven't loaded any apps recently, apart from a few monitoring programs since this problem appeared.
Last night I left it running the extended hardware test for a couple of hours, and the fans were fine.
One thing that I noticed yesterday was that the "GPU" temperature readings in iStat were all missing (just "-" displayed) for a couple of seconds when I clicked on Dashboard. Is there a way to keep iStat open while I'm using the iMac?
I think I'll try booting XP and see what happens.

When I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

when I run a web browser immediately loaded two blank tabs. How to make the browser load the only one?

Did you check the home page setting to make sure that if doesn't have pipe (|) symbols?
See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

How to make the CD/DVD drive compatible on Satellite 5000-204

Hi all,
I see a thread on replacing CD/DVD drive on this notebook, but it was closed, so i write this post.
The most of recent unit is "cable select" type and will not be recognized from many Toshiba notebook.
To solve that you must search a drive for which you can found a firmware update that change it to be "reverse cable select" type, as Nec or Optiarc
If you buy a drive that can't be recognize (like me) read below.
I succesfully replaced the DVD-ROM/CD-RW unit with a Pioneer DVR-KD08 DVD writer.
This unit is a "cable select" type (as most other recent unit) so it can't be recognise by this notebook (and many other Toshiba models). The solution is to connect pin 45 and 47 together on the drive or on the connector adapter (this second solution is simpler).
If you watch the drive from behind these pins are the second and third from the left on the upper row of pin of the connector.
In the connector adapter it's simpler to connect these pin (with care) with a solder iron directly on the circuit board.
Obviously on the circuit board the pins are the second and third from the right.
After this the unit will recognize ok.

Hi buddy
First of all thank you for participation in the forum its always nice to have users who shares the own experience and knowledge.
Thanks you also for this info how to make the CD/DVD drive compatible.
But to be honest Im a little bit skeptical because there is a chance that the drive could be damage during this procedure.
So everyone could do this but only at the own risk!!!
Usually the compatible drives can be found in the user manual and it would be useful taking a look into the user manual before buying an NOT compatible drive ;)
Cheers mate

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

How to make the report run with urls supplied parameters

I have a report that I send the report's parameters by URL.
How can I make the report automatically run with the parameters supplied?
So when the report opens the user does NOT have to click the "View Report" button the report would just run and display the results for the user?
Thank you for you help.

Take your iPad to the apple store and explain your problem. They won't make you sit there for an hour to reproduce the problem. I took an iPad back a month ago wit h screen problems. They didn't look at the problem, they just exchange it.
Again, Apple won't make you stand on your head to reproduce a problem with one of. their produces.

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

2008 - How to make the SATA drives run full speed with Bootcamp and XP ?

Similar Messages

Maybe you are looking for