2008 iMac running beautifully untill recently. Screen glitches and freezing. Apple Hardware test showed error code 4MOT/2/40000004:ADD and I have not seen others with this code. Guessing it is a fan issue based on the ODD and HDD error codes

computer felt hot and while running apple hardware test the screen glitches covered the screen and it froze. Now computer wont boot up. Again AHT code is 4MOT/2/40000004:ADD and I have just seen ODD and HDD codes discussed on other threads.Those were hardrive or superdrive fans, so I am guessing this is a fan issue and then it fried by graphics card. Any help as to whether this is game over or worth repairing would be very appreciated.

You need to take it to your local Apple Store or AASP for a professional evaluation. Apple does not publish the codes from AHT, you can Google the code you got and see if you can determine what it means however the best method is to let a pro handle it.

Similar Messages

I am trying to publish my site so a client can view it. In the past I have not had trouble with this

I am trying to publish my site so a client can view it. In the past I have not had trouble with this

Adobe really does have the worst customer service/tech support of any product I have ever experienced. It is so unfortunate.
Date: Tue, 13 Aug 2013 08:26:34 -0700
From: [email protected]
To: [email protected]
Subject: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
    Re: I am trying to publish my site so a client can view it. In the past I have not had trouble with this
    created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
We need a little more info ..
Where are you publishing to and what is happening when you try and publish?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5590683#5590683
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5590683#5590683
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5590683#5590683. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

Hello Everyone,
I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Any suggestions are welcome and appreciated.
Thank you for your time.

You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive.
THe 4SNS error is a sensor error. You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less. You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

I have a latest 2.7 EFI update but i still don't have the ATH(Apple Hardware Test) software! why is that so? do we have it on mountain lion?

So as u know the question
ill tell u the steps to try them out(no harm will be caused to u or ur com)
During restart-up press the D button before the gray screen appears and hold it for about a minute until u see a 4 or 6 bit image of old mac icon appear and then it loads u go select any language and click hardware test full and then tell me if it DOES HAPPEN ON OS X 10.8(mountain lion).
Thnx apple and u guys!

To use Internet Apple Hardware Test, start up your Mac and hold down both the option and D keys on your keyboard.

Apple TV 1 stops playing music, returns to a menu screen. Usually occurs after several hours. Reselecting music playlist and pushing start will get it playing again. I have not seen anything like this in the forum.

Apple TV 1 is used exclusively for music playback. The device is often in use 4 to 8 hours daily. I have had no problems with it in over two years of use. In the last few weeks it has started a new behaviour.
At random times but not always, it will simply stop playing the playlist and return to a menu screen. Playing music again requires selecting a playlist and pressing play. The device continues working and does not require restarting or resetting.
I have browsed the topics for Apple TV 1 and have not found anything similar to this problem.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

Click here and buy the DVD.
(115929)

My iMac won't start up -- makes the usual start up sound, get the gray screen with the apple, and whirling icon goes endlessly below it. apple hardware test code is 4MOT/2/40000004:0x3d2fdb90

Prior to shutting it down, I had to force quit Safari. I has been running a little slow lately, but nothing major.
Apple Hardware Test code shows
4MOT/2/40000004:0x3d2fdb90
anyone know what that means?
I have a late 2006 intel-based iMac with the iSight camera, running Snow Leopard

Thanks SO MUCH! I am having nightmares about all that could be lost. If the fan can be fixed, then I can cope with the backing up and maybe relieve the hard drive so it gets faster. As Murphy's law would have it, I just bought an external drive but haven't had a chance to set it up to automatically back up. Your reply makes me feel much better... There is hope that I can lip along with this old iMac until I can afford a new one.

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question?

I just upgraded to a new iMac running OS X 10.8.2 and can't scan from by Brother MHC 7820N. Printer works. I reinstalled the scanner driver but when I try to scan, the scanner doesn't connect to the imac. Image Capture says no scanner connected.

I just upgraded to a new imac running OS X 10.8.2 and am having trouble scanning from my Brother MHC 7820N. Printer works fine but the scanner won't connect to the imac. I reinstalled the scanner driver from Brother.com but no luck. When I go to Image Capture, it says no scanner connected. Any suggestions?

You might try a third party scanner software. Printer manufacturers are terrible about keeping their products updated. I'd recommend VueScan, you can get a trial version here and if it works and you like it you can purchase it.
http://www.hamrick.com/

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664

Display crashed - 2008 iMac running Windows 7

Hi there,
I have a later 2008 iMac running Windows 7 on an Nvidia 8800gt. I've been using the Windows side only for playing games, and have been doing so for about a year now. Everything has worked fine until today running Far Cry 2. The display started to stutter, then froze up. I rebooted, and it did this again, eventually crashing out of Windows.
Long story short, when I turn the iMac on now the grey screen is covered in green pixelated lines, and it won't show anything else. Did I finally kill the graphics card, or do I have bigger issues?
Any help is greatly appreciated.

Hmm...looks like you've been bitten by the "weak NVIDIA chip die" issue that so far has not been confirmed in desktops.
During the NVIDIA chip scandal of 2006-2008, an investigation was launched (media source I can't recall) which found a fair number of GeForce 8/9 chips also fell to the same supplier's mistake that crippled countless notebooks.
The best you can do is to bring the unit over to your local Apple Authorized gurus (including Apple Stores) and have them check it out. You can tell them that you suspect a bad GPU. I'm not sure if you'll have to pay for it, though if you bought AppleCare, you'd still be covered today.
Nate

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.

I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/

How do I run the Apple Hardware Test? Its not on my DVD and the Internet-connected version tells me my computer isn't supported!

I have a mini - late 2010 2.4 ghz core 2 duo - that just started black-screen crashing and failing to wake from sleep. Up to a few dasy ago this was a really bulletproof machine! When trying to restart it afer a crash it sometimes emits three weak beeps (sometimes more).
Apart from spontaneous motherboard failure (??) I can only guess that the RAM failed (an 8GB upgrade installed last fall). I pulled one 4GB RAM board and the mini booted again! But it still sometimes fails to wake from sleep, and sometimes give the three beeps. I've run REMBER (a memory test program) on one of the RAM boards and it passes the test. My next step is to test the second one -- but whether it passes or fails there seems to be something else going on.
I'd love to try the Apple Hardware Test but:
- pressing D on startup has no effect (even when starting up with the original install DVD)
- pressing Option-D brings up an Internet-loading screen that brings up a Hardware Test screen then tells me my computer is not supported.
Is the AHT simply unavailable for my model of Mac? And/or is there any way to test my hardware?

The 2010 Mac Mini's came with a 2 DVD set, a Mac OS X Install DVD (22691-6657-A) and an Application DVD (22691-6658 -A). The Apple Hardware Test is on the Application DVD (22691-6658-A).
see > Intel-based Macs: Using Apple Hardware Test

Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green " " button is just moving big keyboard size up. I would appreciate a hint how to fix it. Alex

Keyboard viewer on my iMac (running Snow Leopard) recently has lost small size. Green "+" button is just moving big keyboard size up. I would appreciate a hint how to fix the problem. Alex

You can resize the keyboard window, positioning the mouse pointer at the edge of the window, clicking and dragging to the desired size.

I have 2T imac running lion Can I re-partition and use one half as a back up disk?

Bought a new mac in November and it is refused to start up yesterday. Spoke with Apple and they said I should make sure I do regular back ups in case I l ose my hard drive?!?! I did a clean install of the Operating software but was advised to erase and install.
I have taken all my important stuff off and can reinstall my programs once I get to the next stage so what I am wondering is
I have 2T imac running lion Can I re-partition and use one half as a back up disk for use with time machine so that I do not have to buy an external HD?
Cheers J

You could partition the drive, I read that Time Machine will work on if you HD partition.
BUT, it will do you no good if you HD fails.
Usually, if a HD fails it's the entire drive that is dead not just a partition.
So your time machine back would be on a dead disk, useless!

2008 iMac running beautifully untill recently. Screen glitches and freezing. Apple Hardware test showed error code 4MOT/2/40000004:ADD and I have not seen others with this code. Guessing it is a fan issue based on the ODD and HDD error codes

Similar Messages

Maybe you are looking for