2008 iMac running OS 10.7.5 doesn't recognize 2 LaCie external drives.

I recently upgraded my iMac's OS from 10.6.8 to 10.7.5. Now it won't recognize 2 external hard drives. The 4T LaCie is plugged in to a USB port on the mac.
The 5T LaCie is plugged in to a USB port in a 'Pluggable" USB 2.0 10-port powered hub. What could be the problem?

Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

I have an issue with time machine, it doesn't find the Lacie external driver it use to use. it is the same drive that I usaly use for time machine back ups. It is corectly plugged. What can I do ?

Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?

Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie

I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

Click here and buy the DVD.
(115929)

Display crashed - 2008 iMac running Windows 7

Hi there,
I have a later 2008 iMac running Windows 7 on an Nvidia 8800gt. I've been using the Windows side only for playing games, and have been doing so for about a year now. Everything has worked fine until today running Far Cry 2. The display started to stutter, then froze up. I rebooted, and it did this again, eventually crashing out of Windows.
Long story short, when I turn the iMac on now the grey screen is covered in green pixelated lines, and it won't show anything else. Did I finally kill the graphics card, or do I have bigger issues?
Any help is greatly appreciated.

Hmm...looks like you've been bitten by the "weak NVIDIA chip die" issue that so far has not been confirmed in desktops.
During the NVIDIA chip scandal of 2006-2008, an investigation was launched (media source I can't recall) which found a fair number of GeForce 8/9 chips also fell to the same supplier's mistake that crippled countless notebooks.
The best you can do is to bring the unit over to your local Apple Authorized gurus (including Apple Stores) and have them check it out. You can tell them that you suspect a bad GPU. I'm not sure if you'll have to pay for it, though if you bought AppleCare, you'd still be covered today.
Nate

I have an iMac and I am running out of disc space. I am considering an external drive to house my iTunes library. If I buy a second drive to operate as a back up will time machine back up the disc on the IMac and the external drive with the iTunes library

I have an iMac and I am running out of disc space. I am considering an external drive to house my iTunes library. If I buy a second drive to operate as a back up will time machine back up the disc on the IMac and the external drive with the iTunes library?

If you have a considerable photograph and/or movie collection you may want to consider off loading those to the EHD too. Here are Apple's article showing how handle iTunes & iPhoto libraries.
iTunes: library on EHD
iPhoto: How to move the Library to EHD
Roger

LaCie external drive won't mount on iMAC

Hi,
My external LaCie external drive won't mount on my iMAC running 10.6.8 but will mount and show up on my PC as working fine, however I am not able to read the information on it as it was formatted for my iMAC. Therefore it leads me to believe this is a software issue.
I have reason to believe someone had changed the permissions and prevented the mounting of this external drive (which belongs to me) so that the contents won't be found on my iMAC.
How to resolve this issue?
Thanks in advance,
Cait

Cait,
Please try a SMC reset, it may take 2-3 attempts for it to work. Look over the instructions below carefully.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

Hi,
Here's one option you could try as it will give a good indication whether the problem is with Windows or a Hardware issue with the optical drive itself.
Create a bootable Ubuntu CD
The Ubuntu CD you create should run as you boot the notebook ( ie outside of Windows operating system ), so if this will not run, the problem is almost certainly a Hardware issue with the DVD drive
On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD. The 'try it' option does not need to install on the Hard Drive, it just runs from the CD.
http://www.ubuntu.com/desktop/get-ubuntu/download
Let me know if this will run.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

2008 iMac running very slow...why?!

My 2008 iMac started running very slowly yesterday, taking ages to start up and showing the spinning wheel on the desktop for ages making it impossible to do anything. It particularly doesn't like running iTunes or Spotify and got worse when I plugged my iPod in. Another thing I can think of is I downloaded an album from iTunes yesterday and this seemed to coincide with it having a breakdown. Chrome is also running slow and I get frequent unresponsive script messages.
I'm running OS X 10.5.8 and have upgraded to iTunes 10.6.1. I recently installed the Flashback removal software. Anyone got ideas as to why my computer might suddenly be behaving like this? Don't fancy an expensive trip to the Genuis Bar! Thank v v much.

Hi...
How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
Since it's so slow to startup, remove any items in System Preferences > Accounts > Login Items
If there's enough free disk space and removing any items from the Login Items pane didn't help, the startup disk may need repairing.
Using Disk Utility to verify or repair disks

I want to install 10.6 on my 2008 imac running 10.5.8 and the cd that came with my new mbp won't work, any ideas

I want to install 10.6 on my 2008 imac 2 core duo running 10.5.8 using the install cd that came with my new macbook pro. I get the message "...snow leopard cannot be installed on this computer" then i opened up the optional installs package on the cd and I got the message "Optional Installs must be installed on a system with Mac OS X 10.6 or greater" .......... any ideas?

johnson-65 wrote:
Thanks Ana....will probaly try that.
You're Welcome...
Definitely the way to go...

My new 24in imac doesn't recognize my usb external hard drive- snow leopard

i was attempting to do a new time machine back up on my new mac but it won't recognize the usb external hard drive (kaser 250gb). i used it frequently on my old g5 imac, no problems. i plugged the hard drive into my g4 ibook and it recognized it right away. i followed the apple tip of pulling the power plug out of the wall power socket and pulled all the usb cables out as well (i have the wireless keyboard). i let it rest for over 5 minutes and only plugged in my wacom stylus and usb external hard drive. still nothing. and it doesn't show either in disk utility. i also downloaded as per another thread the 3g ntfs system preference but to no avail. the only thing i can of doing is erase and reformat my external on my ibook, but i don't want to risk loosing the data without a back up.
anything else i can try? (before i buy time capsule) thanks

i just checked again by plugging the external into my ibook g4 and checked how it was formatted - mac os extended (journaled).
Then the 3GFS software is not required at all.
i have an idea, not sure if it will work and it will have to wait a couple days until i get my firewire back from a friend, but this is what i'm thinking: my intel imac has a 1tb hard drive. could i use target mode between my imac and ibook? with my ibook i'd attach the external hard drive, then using the firewire and target mode start it up. hoping that the ibook hard drive and the attached external hard drive would show on my intel mac for which i could copy over the external back ups onto my imac. once completed, i could erase and reformat the external on my ibook and then try again on my imac to see if it appears on my desktop. do you think this might work (even though it is correctly formatted already?)
I use Target mode on a regular basis for mounting the internal drive on a Mac to transfer or salvage data. I don't know if you will be able to connect to an external drive on the Target computer. There's not usually any reason for this and I don't know if the Target Mode will enable the Logic board to deal with the USB ports and transfer data. I kinda doubt it, but other more experienced users can jump in here.
I don't think the problem with your external drive is the format, since you've already checked it and it is already formatted for a Mac. Intel Mac's will mount drives formatted by a PPC Mac with no problems, unless your OS doesn't support the chipset in the USB case that connects to the drive. There are some USB drives that are known to not work well with SL but worked fine with Leopard.
You can buy a cheap USB case (about $30) and move the drive from the old case to the new case, or buy a USB to IDE adaptor cable (about $20), or you can buy a larger external drive that will work on the iMac and use the G4 to transfer the date from the old drive to a new one. Or you can take both drives to a friend with a Mac and use Disk Utility to restore the USB drive to a partition on the Firewire drive. That doesn't fix the USB drive to work with your new Mac, but unless the vendor comes out with a firmware fix, I think that's a lost cause anyway.
other than the above, i may just go buy a 1tb time capsule,
I would not be getting a Time Capsule to back up a single computer. Wireless backups are a lot slower than FireWire or USB (of course, it's the initial backup that takes so much time). If you do have several Mac's that need a TM backup volume, then the Capsule can help you out. It is supported by Apple (and there are a lot of users here in the forums). I'm using a ReadyNAS device for network backups, but it is not supported by Apple, and I have to rely on NetGear for fixes if an OS update breaks my backup system.
BTW, it's a good chance that a TC device will be able to see and mount your USB drive. The incompatible chipset problem with some drives seems to be limited to the USB drivers in SL which the TC is not running. That's why I said that a USB hub may also let you see your drive, the problem is there's no guarantee's...

Imac running 10.8.2 often does not start up with firewire drives connected

I have a mid 2007 imac running osx 10.8.2 and it will nit restart with two firewire drives connected if it has been running for sometime. If i disconnecr and restart and then connect the drives and then restart again it will restart.

a brody's guess is a good one. Please also look at what Apple says in Gray screen appears during startup

Using smart previews on iMac to control two sets of identical original files on two external drives --- render previews setting when using smart previews

I’m just getting started with Lightroom and if someone can help me I’ll be very appreciative.
I’m using an iMac with a 1TB drive and two external 2.5 TB drives for backup. My active files are on all three drives and I’m running out of room on the iMac drive.
With the smart previews capability of Lightroom 5, I’m hoping to remove all the active files from the iMac drive. I hope to import existing images into the LR catalog from two identical drives with identical folders and have both sets of images reflect the changes I make using smart previews on my iMac.
I just created two identical test folders of junk images on the external drives and was following a beginners tutorial on importing. However, I see nothing about using smart previews on my iMac that, when connected, will update more than one external drive at the same time.
I’m also wondering if, when using smart previews, it matters how I set the render previews during the import process.
Many thanks for any help,
Karl Hentz

I don't see any way to use smart previews to update both external drives at the same time. The smart previews are linked to a specific set of images. But it seems to me that if both drives are in fact identical, once the catalog is updated when one of those drives is connected those changes should also apply to the files on the other drive. It's actually the catalog that gets updated, not the images. Smart previews and regular import previews are completely unrelated. How you have your import previews configured will have no effect on your smart previews.
Incidentally, in order for my suggestion to work it would be necessary to only have one of those external drives connected. And when the other EHD is connected it would have to have the same drive letter or name. In other words it would have to appear to the iMac that it is precisely the same drive.

Problems with iMac G5 and LaCie external drives

I have an early iMac G5 (without iSight), running OS 10.5.2. I've had a 250GB LaCie external hard drive for about a year now, and it worked fine up until a couple weeks ago, when I got this message:
Disk Repair
The disk "External HD" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
I was unable to save anything to the drive after this, including altering files already on the drive. Long story short, I bought another LaCie drive, because I needed more space anyway. I got the 500 GB model, moved everything onto it, erased the old drive, and then I had two working drives. I've since only been using the new drive, but just a few days later, I got the same message again, and am having the same problem, but this time for the new drive. I'm not a computer-savvy person, so I have no idea what could be causing this. This happened not long after updating to OS 10.5 from 10.4 - I'm not sure if this could be related. Can anyone help?

One thing to look out for is the power source. If you have a huge octopus of power cords plugged into one outlet, the drive may not be getting enough power to operate properly. That would explain why the same thing happened on two separate drives, both recently. You may have added something new to the +power strip+ that is overtaxing the available power draw.
Someone I know had this issue. It never occurred to him or me to consider this possibility. His external drive was regularly getting disk directory errors. I initially thought the drive was going bad, but once we distributed the power cords to two power strips connected to different outlets, the problem did not recur.
Your problem may be something else, but it sounded too familiar to not mention my experience with the power cord octopus monster.

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on external drive. I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive. Is this going be a problem?

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac. This would save having to transfer several hundred GBs of data. Will this work using Set Up Assistant?

Your user account on the new Mac must have a different UID than on the old one. See the pink box in Problems after using Migration Assistant for an explanation.
You'll need to change the permissions on the iPhoto library on the external HD. Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password.
Then click the plus sign, select the user account you want on the next screen, and click Select. Then change Read only to Read & Write for that user via the little arrows. Finally, click the "gear" icon and select Apply to enclosed items. That may take a few mintutes on a large library.

2008 iMac running OS 10.7.5 doesn't recognize 2 LaCie external drives.

Similar Messages

Maybe you are looking for