2008 imac won't boot

I have a 2008 24" imac that will not boot into OS X 10.6.8. I have a windows 7 partition that i can boot into and my screen has redish vertical lines.

Thanks for trying. I'd rest SMC before, but did it again just now with no luck. One thing that's weird is that since I moved it, the power cord, keyboard usb cable and wireless mouse usb transmitter have been difficult to remove. I actually had to get a pair of pliers to remove the transmitter (gripping the transmitter firmly but gently through a cloth so as not to damage it). I don't know if that would have anything connection to it not starting (I can't imagine how), but it's a notable change.

Similar Messages

April 2008 iMac won't boot

When I try to start the iMac, it loads the apple icon, gets the spinning wheel and starts a progress bar at the bottom of the screen. After the progress bar get maybe 1/10th the iMac shuts down. I can get to the screen to load an external drive by holding down the option key, but it will not load or boot from an external drive. The Recovery drive is also of no use, it says no drives can be validated or repaired. Any suggestions are welcome. Also will not restore from Time Machine backups.

Sorry, should have included.
Only upgrade is more memory to 4GB.
Up to date on OS X.
Has Maverick installed.
Use only Apple productivity software (e.g. Pages / Numbers / Keynote).
On Comcast for internet (? Forced to, somewhat faster than DSL) via AirPort Extreme.
Hard wired keyboard
Bluetooth mouse
HP hard wired printer
Canon Bluetooth printer
   20-inch, Early 2008 iMac
   OS X 10.9.3
   2.4 GHz Intel Core 2 Duo
   4 GB 800 MHz DDR2 SDRAM
   AirPort Extreme

Early 2008 iMac won't boot up

My early 2008 iMac was getting slow. It didn't really seem to have anything wrong with it other than being a 5 yr old middle of the line model with 4 GB of ram. But I decided it was time to upgrade and so bought a new iMac. After transfering files & apps to the new computer, I shut down the old one and moved it. I used it in my piano teaching studio, and so was intending to set it up for students to use. When I went to boot it up, however, it wouldn't. I unplugged it (from the computer and the outlet), then plugged it back in after a couple of minutes with no luck. I was told some time ago you didn't have to do this, but not knowing of anything else to try, I unplugged it again and then tried pressing the power button as I plugged it back in. No luck.
Any thing else I might try before taking it to the Apple store and seeing if they can start it?

Thanks for trying. I'd rest SMC before, but did it again just now with no luck. One thing that's weird is that since I moved it, the power cord, keyboard usb cable and wireless mouse usb transmitter have been difficult to remove. I actually had to get a pair of pliers to remove the transmitter (gripping the transmitter firmly but gently through a cloth so as not to damage it). I don't know if that would have anything connection to it not starting (I can't imagine how), but it's a notable change.

Early 2008 iMac won't start up. Goes to apple logo and freezes

Early 2008 iMac won't start up. Goes to the apple logo but it has a couple of yellowish stripes on it. Then the whole screen gets the stripes and it freezes. Does the same thing using another start up drive or a recovery drive. Running Maverics. Help!

I work at an Authorized Apple Reseller and we are having the same problem with one of our showfloor models.
Model: iMac 21.5" (Brand New Core i3, etc)
Problem Description: When you press the power button, you hear the Apple chime and the screen turns on. Instead of booting normally, the screen shows the Apple logo, a spinning 'loading' circle (I call it a ferris wheel), and a loading bar below that. Typically the loading bar is for an EFI Firmware update, but I don't remember updating the iMac recently. Anyways, the loading bar moves once, starts over, and then the iMac shuts down.
Possibly Related Issue: Several days leading up to this issue, the computer was very noisy. It sounded like the hard drive was working overtime on indexing or something, but it ran fine and spotlight wasn't even indexing at all. I walked by it yesterday and noticed it wasn't on. I pushed the power button, and the problem it has now started.
I will keep searching the forum for a solution, but I have a feeling this is a hardware issue that will need to be serviced by Apple.
Sidenote: If anyone has any experience contacting apple as an Apple Reseller about repairing a computer before the warranty starts, any advice would be greatly appreciated

My iMac won't boot. I only get a white screen. Won't open in safe mode or recovery mode. Any suggestions?

Hey, any help? My 24" iMac won't boot. I only get a white screen when turning on. It won't open in safe or recovery mode. Any suggestions?

If you can't boot from your installer DVD, then take it in for service.

IMac won't boot to OS 9, boots Panther fine

Bought an iMac G3/500/128MB/CD-RW off Ebay for super cheap (this is the Indigo 500 with 64MB base RAM). Loaded OS 10.3.3 with no probs, tested it out with no probs. (I know the 128MB RAM is less than recommended/required for Panther, the machine was supposed to have 256MB and the seller is sending that to me). Next step was to load OS 9.1 from the CD. The iMac won't boot from the OS 9.1 CD (It boots fine from the Panther CD). Also tried booting from a firewire CD drive, same result. The result is a folder with a question mark, then a folder with a smily face, repeated twice before it aborts the OS 9 boot and goes into Panther.
Repaired permissions, no luck, wiped Panther off the drive and tried booting to OS 9 with blank drive, and still no luck.
As stated above, the machine was supposed to have 256MB RAM, and it also has a 20GB HD when it was supposed to have a 30GB HD. I declined a new HD as the seller offered me $20 as an option (bringing the total shipped down to $69.00), but now I'm wondering if I should replace the HD with the 30GB he offered? I don't think it's an HD issue though and replacing it looks like more trouble than it's worth.
I'm not too bummed if I have to stick to Panther, I just have a few OS 9 apps that I'd like to have access to.
iMac G3/500/128/CD-RW Mac OS X (10.3.3)

Does the CD drive boot from the Panther installation disk? I'm wondering if the CD drive is faulty, and it's not a Mac OS 9 specific issue.
Also, in combination with that problem, the hard drive may have been partitioned without the Mac OS 9 drivers. If you haven't tried already, use Disk Utility to partition the drive. You can keep it at one partition, but be sure that the "Mac OS 9 Drivers Installed" check box is installed. [NOTE: partitioning will wipe the drive clean.]
Other than that, I don't have a clue...
If you can't boot directly from Mac OS 9, most "classic" apps will run fine under Mac OS X in the "Classic" environment. If that works, it's actually a better way to access to Mac OS 9 programs.

My iMac won't boot past grey screen and it didn't come with a os x disk

My iMac won't boot past grey screen with apple. I've tried booting in safemode but that didn't help and my iMac didn't come with a os x disk.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

27" iMac won't boot from anything BUT the main drive

Hi all,
My lovely 27" iMac is in perfect working condition, but I thought I'd try to install a OS on a large SD card to see if I would gain any speed.
In the process of doing that (cause I never got that far) I discover that the iMac won't boot from the original install DVD. It simply spits out the DVD when I try to insert into the drive. I'v managed to make an image of the DVD (in a different mac) onto the SD card in order to try an boot from that. No luck. I've tried to insert a original install DVD from my Mac Pro into the iMac, which it reads fine and well, and when I tap the restart button it restarts, but stop with a white screen doing boot up.
If I try to hold down the option key during startup, the iMac WILL let me choose which OS to boot from, but if I choose anything else than the OS already installed it freezes.
I've even tried to boot my Mac Pro from the iMac install DVD - no problems.
I've even run a hardware test on the iMac - no problems.
I am running out of options fast! Please help a devoted Mac-friend.
Take care.
Peter

I WAS using the DVD that came with the machine, but I fear Apple may have sent me the wrong one?
In trying to solve the issues I'd tried other OS disc's (A Mac Pro install DVD and a OS X Leopard DVD) - but none of them would even boot, nor install of my iMac. I always end up with a white screen during boot up.
As I described, the original iMac install DVD would indeed boot my Mac Pro, do the disc seems ok?

My iMac won't boot....Msg says "NO BOOTABLE DEVICE--INSERT BOOT DISK ...

I don't know how to start my iMac up. I don't even know what a boot disk is! Several days ago I tried to run Boot Camp but couldn't continue because I didn't have a Windows program to install si I'm not sure what happened. Can somebody please help me out? Thanks.
Dman- [email protected]

My iMac won't boot....Msg says "NO BOOTABLE DEVICE--INSERT BOOT DISK ...
Posted: Jan 17, 2011 11:44 AM
I'm getting this message again. When I restart using the option key everything is ok. When the computer goes to sleep it has the above message. Is there a setting I need to turn off so this doesn't happen all the time? Thanks.
Dennis

IMac won't boot up after latest update. Any suggestions?

I just updated my software (the latest from apple), then my iMac won't boot again.

There you go. Your HDD is failing hence its not booting. You need reformat the HDD
To reformat, same steps: Boot to the install disc > get past the language selection > You will see Welcome to Blah Blah Blah > just hit continue > There should be something there called erase and install
BUT
1. if you are absolutely sure that Time machine has BACKED-UP all of your files then proceed above
2. If not, if you have another mac: connect it via firewire then google Target Disk mode. Basically you want to copy all your files from the damaged machine to the new mac to serve as a backup
3. if yo dont have another mac: get an external HDD, install Mac os X on it, boot to it then back up your files
to do this
a) Plug external HDD
b) Boot to the CD restart and hold C
c) Get past language selection and keep hitting continue
d) when it asks you where you want to install Mac os X > select the external HDD
e) once its installed. Restart the computer and hold "Option" key. You should now see your external HDD as one of the boot drives. Select that and you'll boot into it
f) once inside the external HDD OS, you will see the internal HDD(damaged drive)browse/navigate through it and start getting your important files

My imac won't boot up. I get a white screen with the apple logo and the spinning spiral--any ideas?

my imac won't boot up. I get a white screen with the apple logo and the spinning spiral--any ideas?
I have started having trouble since i had to upgrade OS the latest in July 12.

http://support.apple.com/kb/TS2570 Follow this article and when it gets to the part where you go into disk utility using your install disc, you'll actually boot up holding down Command and R

My iMac won't boot up past the white screen with a grey apple and spinning icon

My iMac won't boot up past the white screen with a grey apple and spinning icon...please help!

command R did not result in anything different - still the white screen, etc. I do you Time Machine with and external hard drive, but I unplugged that. I have the installation DVD, but it doesn't seem to be reading it either.

My iMac won't boot up it has a gray screen and makes a steady beeping sound

My iMac won't boot up it makes a steady beeping sound and has a gray screen, occasionally it shows a picture of a file with a question mark blinking in the center, can anyone help

The blinking question mark indicates that the firmware could not find a valid Operating System on your machine.
Your harddrive may have failed. Your filesystem may have bcome corrupted.

My Imac won't boot up. It is stuck on apple logo with spinning gear.

My Imac won't boot up. It is stuck on apple logo with spinning gear. It will not boot in safe mode, my install disc will not read and fsck wont fix it.. I can hear the hard drive spinning. So i know my drive is not bad.. Right before this happened i was low on space so i deleted a bunch of movies but for some reason i had to change my drive permissions to do so..

Is your data backed up? If not, see these means of data recovery: https://discussions.apple.com/docs/DOC-1689 If it is backed up, then purchase Alsoft Disk Warrior. Boot it using the Option key of a wired Apple keyboard.

My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
Try PRAM Reset Cmd + OPtion + P + R on start up.
Try safe boot - hold down shift on start up.
Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

2008 imac won't boot

Similar Messages

Maybe you are looking for