2008 Mac Pro Hangs
My 2008 Mac Pro with OSX 10.6.8 Model 3.1 just started to 'hang" for about 40 secs. periodically while browsing any website. Problem occurs with both Safari 5.7.1 and with Firefox. Internal temps appear to be OK. You can browse OK for a few seconds or so then it will hang again, then will be OK for a few seconds then will hang again. I haven't added or removed anything at all for several days. Tried restarting computer and doing an SMC reset with no help.
Anybody have any ideas?
Thanks for any help,
B. Taylor
If instaled, try temporarily disabling anti virus software.
If you don't have a/v software installed, try a different DNS server.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here.
Try a browser.
Similar Messages
-
Mountain Lion Hangs on Early 2008 Mac Pro
I installed Mountain Lion 12A269 on a freshly formatted disk on my Early 2008 Mac Pro. I have 10 GB of memory.
Once or twice a day, the computer hangs. I can move the mouse cursor, but can't click on anything and the keyboard is inactive. The dock doesn't raise when I move the mouse over it. CMD-OPT-ESC doesn't bring up the force-quit window and none of the menus work. All I can do is hold the power button in to shut down and then restart the computer.
There's no kernel panic -- the computer just hangs.
The console shows two System Diagnostic Reports:
Finder_2012-08-28-093935_Disk.hang
RPDLAgentHelperE_2012-08-16-14738_Disk.crash
Since it just hung a few minutes ago (08/30/12) I don't know if either of these files are relevant. Neither one is helpful.
I'm looking for suggestions for fixing this problem or additional troubleshooting. The computer just hangs -- there's no consistent action to trigger it. It's already resulted in a lot of lost work and productivity.The console messages indicate a problem with your disk drive. It may be failing.
-
Late 2008 Mac Pro won't start -- help! Hangs up on Airport: RSN handshake complete on en2.
Hello Mac Pro user,
I have a late 2008 Mac Pro. It will not start anymore. The computer chimes and then goes to the Apple icon screen with spinning cursor, but then it freezes and goes no further.
So I did a single user start up [shift command S],then I let the info. load on the black screen, and found that the system hangs up at this line: Airport: RSN handshake complete on en2. Does anyone know what to do?
How do I get it to boot up again?
Thanks,
Yvettepull the drives you have. ]
F'ind a way to do a clean system install on another drive.
Clone your user data to another drive also.
ie, create a new solid foundation.
but until your repair your drives, by booting off another device, don't use them. Pull them for now. -
Radeon 5770 in 2008 Mac Pro, won't boot - hangs at Apple logo screen??
Okay, so I had the Radeon 2600 XT and it kept giving me issues with pink & white checkerboards and freezing, then eventually wouldn't let me boot past the white/grey apple logo loading screen. Now, today I installed Apple Radeon 5770, just installed, got the MiniDisplay to DVI-D adapter and everything, but it STILL won't let me get past the white/grey apple screen! I can't seem to get the DVD drive to open either. Both of my hard drives have been working fine and I've even swapped slots and i still can't get past the white screen! What gives? I just dropped over $300 for this, so you can imagine my dismay and frustration. Can someone please help me with some ideas? Would be GREATLY appreciated.
It's a 2008 Mac Pro dual 2.8Ghz (3,1), running 10.5.8
MYeah, ok thanks for the response about the screen! So, I don't have 10.6.5. I'm running 10.5.8, which the Radeon 5770 says it needs 10.6.5, but -finally- I got my computer to boot up with the 5770 in it, on 10.5. Al I did was hold OPTION+ Power button and it took me to a blue screen, then to my 500 GB new HD. I then switched over to my other username on Macintosh HD (drive that came with the MacPro) and OSX loads fine! I can tell that it still needs to be on 10.6.5, so I can download the drivers because the text is ever so slightly fuzzy, and the color isn't tuned well (too much contrast) and images take a little longer to load/ are a bit laggy. I'm just glad it's up and running! No more pink transparent checkerboards, and loud *** fan sounds! I am wondering though, what was causing this hold up? Is it only booting up because I have the 10.5.2 install disc in the SuperDrive? I almost don't want to take it out and try without it, after the trouble i've had, just in case lol. I'd like to have an idea as to why, because I don't want to mask a problem, and have it eventually turn into a catastrophe.
-
Early 2008 Mac Pro + nVidia 8800: Never going to work?
This forum is littered with threads about early 2008 Mac Pros with the nVidia 8800 card - none of them positive.
I was unfortunate enough to wait for Apple to release such a machine and buy it. Graphics performance is dire given the hardware available. The machine routinely crashes with the window manager hang problem (the user interface just locks up, yet network services etc. still work), in the way familiar to anyone blighted by this particular bug; just run the Folding@Home client on your machine if you want to experience the joy. Or screensavers, sometimes, so I've had to turn those off. And I've had to turn off monitor power saving too, because I too suffer from the 'monitors sometimes don't wake up' bug. And of course I can't sleep the machine either, because firmware upgrade or not, it's still not reliable. And after all this, still the machine crashes.
SSH to the machine; try to restart cleanly; even 'sudo reboot' won't restart it. Apple have achieved something I've never seen out of any Unix or Unix-like operating system, ever; the kernel is unable to kill its own processes.
There have been no indications from Apple that I've seen on these forums over several weeks that the problem is even being acknowledged, let alone tackled. Latest reports indicate that even the 1st gen Mac Pro owners are suffering if they install the 8800.
http://discussions.apple.com/thread.jspa?threadID=1460752&tstart=0
My machine rarely makes it through the day without a forced reboot due to the window manager hanging. I can't do any work on it. I can't rely on it. I can't enjoy it. I can't even use it for web browsing without fear of it hanging.
There seem to be no facts about this at all. So all I can ask for is opinions. Does anyone have any offering of hope that early 2008 Mac Pros might ever work properly with 8800 cards? Y'know, little things, like actually being able to handle graphics? Or sleeping the monitors? Or, heaven forbid, sleeping the whole machine? Or should I just send it back as unfit for purpose?
Yours, tired and exasperated... :-/I posted this in some other blog (forum), I should have posted this here also but I hope this gives you and all with these problems hope!! I also ran some fish tank test some else posted to get the folding problem to happen and I can not get it to happen at all now, and since my 8800 went in I get NO LOCKUPS, SCREEN FREEZES, shaky blurry video when I boot, so far NOTHING, IT JUST WORKS!!!!!!!!
Now that I think about it the person who said to use the fish tank program had a bad 8800 and maybe you do also!! here is the link to that:
http://discussions.apple.com/thread.jspa?messageID=6965475�
I purchased my first mac pro early 08 2 months ago (amazon.com).
2 quad core 2.8's, 2 gig apple 4 gig OWC total 6 gig ram,2-WD raptors (1st mac 2nd boot camp winxp 32 bit), apple care.
I had all my problems with the ATI card (I always purchased ATI, never Nvidia, for all the PC's I built) a couple of times I bought the first ones out, these had all kinds of problems until good drivers that actually worked were released (usually 6-12 months after the release of the card).
So I try not to buy routers, graphic cards, etc.. for at least 6-12 months, but back to my 2600 card!!
When I received my mac the graphics would freeze, I did a lot of online reading only to find out the ATI 2600 was the problem, the cure was to hook up 2 monitors to the card (and that worked!!).
Then they came out with the firmware update, now my main monitor would after 2 days on a reboot be scambled (samsung syncmaster 213t, NEVER had ANY problem with it before on any PC I had, so I knew it was not the monitor) to fix the problem I had to either turn power off to the syncmaster or resetting PRAM (worked for a couple more days, then the same problem).
I called apple and they sent a tech out within days to replace the ATI card, the replacement did the same thing after a couple of days, so I called Apple back and they took a bunch of info from my computer (BTW not much at all loaded in the mac side) and said to call back in a week, so I called back a week later and they said they were going to exchange the card for either another ati 2600 or the Nvidia 8800, I said 8800 and a day later on a saturday I received it, swapped the card and NEVER HAD ANY PROBLEMS at all!!
So I don't know if the ATI card has problems with certain monitors or they are just poorly made (maybe AMD is mad with Apple that Apple did not use AMD processors).
I have read others that swapped with the 8800 and their problems went away also!!!!
Maybe some have no problems with the 2600, but I would not recommend it to anyone, if you can avoid the 2600 GO WITH THE 8800, the drivers will get better (and the 8800 will eventually outperform the ATI)and you will not be sorry.
Apple is awesome, they are 2nd to none, their is no other company like this anymore that I have dealt with in a long time (not just because they gave me a 8800), like I said in the beginning of this post I always purchased ATI cards and would have kept it if it would have worked but 2 doing the same, ATI [AMD] has lost my support until they prove otherwise.
I recommend Mac's to everyone now!!
good luck and let me know it any of this has helped!!!!!!!!!! -
for the last several days I have experienced the dreaded wite screen of death upon power up of my 2008 Mac Pro 2.8,
Screen will hang white - no apple logo - when I hit the power button resart - the mac power light does not go out, but "clicks" and the mac will restart.
I get the white apple logo screen and then some terminal script (about 20-25 lines) that lasts for a dew seconds - then an apple message appears telling me that my computer needs to be restarted due to an error - press a key or wat.... this will cycle continuously.
If I power down and boot in safe mode - the computer seems to start up - with a crash log.
Once I restart from safe mode - the mac seems to start fine and I am using it without issue - (of course until I power down and come back in the studio the following day...)
I am not familiar with crash logs - but here are the two most recent...
Interval Since Last Panic Report: 25449 sec
Panics Since Last Report: 1
Anonymous UUID: 68CEF3A2-4EFE-D602-DB91-4A773D0A413B
Wed Jul 31 21:26:23 2013
panic(cpu 2 caller 0xffffff801109e53b): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x80, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-2050.24.15/osfmk/x86_64/pmap.c:2337
Backtrace (CPU 2), Frame : Return Address
0xffffff82f8cdbaa0 : 0xffffff801101d626
0xffffff82f8cdbb10 : 0xffffff801109e53b
0xffffff82f8cdbb90 : 0xffffff80110a2d50
0xffffff82f8cdbc50 : 0xffffff80110a3585
0xffffff82f8cdbca0 : 0xffffff801106720c
0xffffff82f8cdbd90 : 0xffffff801106b0e0
0xffffff82f8cdbdc0 : 0xffffff8011065bdf
0xffffff82f8cdbdf0 : 0xffffff8011402243
0xffffff82f8cdbe10 : 0xffffff8011464c0c
0xffffff82f8cdbe50 : 0xffffff80110943a3
0xffffff82f8cdbe80 : 0xffffff8011020b3d
0xffffff82f8cdbeb0 : 0xffffff8011010448
0xffffff82f8cdbf00 : 0xffffff801101961b
0xffffff82f8cdbf70 : 0xffffff80110a6536
0xffffff82f8cdbfb0 : 0xffffff80110ce9e3
BSD process name corresponding to current thread: powerd
Boot args: arch=x86_64
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000010e00000
Kernel text base: 0xffffff8011000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 12797763977
last loaded kext at 11912907618: com.apple.driver.AppleUpstreamUserClient 3.5.10 (addr 0xffffff7f92a7b000, size 36864)
loaded kexts:
com.uaudio.driver.UAFWAudio 4.1.1 16344
com.motu.driver.USBMidiKext 1.6 49190
com.uaudio.driver.UAD2System 7.1.0
com.motu.driver.PCIAudio 1.6 57985
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.kext.AMDFramebuffer 8.1.2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.ATIRadeonX2000 8.1.2
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.CSRHIDTransitionDriver 4.1.4f2
com.apple.driver.AppleFireWireStorage 3.1.7
com.apple.driver.initioFWBridge 3.1.7
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.1.7
com.apple.driver.LSI_FW_500 3.1.7
com.apple.driver.Oxford_Semi 3.1.7
com.apple.driver.StorageLynx 3.1.7
com.apple.driver.PioneerSuperDrive 3.1.7
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleUSBAudio 2.9.0f8
com.apple.iokit.IOSurface 86.0.4
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.kext.AMD2600Controller 8.1.2
com.apple.kext.AMDSupport 8.1.2
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.1
com.apple.iokit.IOFireWireSBP2 4.2.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 26 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Memory Module: DIMM Riser B/DIMM 2, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Memory Module: DIMM Riser A/DIMM 1, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Memory Module: DIMM Riser A/DIMM 2, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Memory Module: DIMM Riser B/DIMM 3, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 4, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x00004D5035313241373243503444332D5336
Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 0 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
PCI Card: pci137a,5, sppci_audio, Slot-2@2,0,0
PCI Card: pci1a00,1, sppci_othermultimedia, Slot-4
PCI Card: pci1a00,1, sppci_othermultimedia, Slot-3
Serial ATA Device: WDC WD3200AAJS-41VWA1, 320.07 GB
Serial ATA Device: ST31000333AS, 1 TB
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: ST31000528AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd340000 / 7
USB Device: MIDI Timepiece AV, 0x07fd, 0x0001, 0xfd343000 / 10
USB Device: iLok, 0x088e, 0x5036, 0xfd342000 / 9
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd341000 / 8
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd341200 / 14
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd330000 / 6
USB Device: Kensington Expert Mouse, 0x047d (Kensington), 0x1020, 0xfd333000 / 13
USB Device: Keystation Mini 32, 0x0a4d (Evolution Electronics Ltd.), 0x129d, 0xfd331000 / 12
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd332000 / 11
USB Device: iLok, 0x088e, 0x5036, 0xfd320000 / 5
USB Device: Eleven Rack, 0x0dba, 0xb011, 0xfd310000 / 4
USB Device: DISK 2.0, 0x090c (Silicon Motion, Inc. - Taiwan), 0x1000, 0xfd100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 3
USB Device: MIDISPORT 4x4 Anniv, 0x0763 (M-Audio), 0x1060, 0x5d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: Oxford ATA Device 00, Glyph Technologies, 800mbit_speed
FireWire Device: Oxford ATA Device 00, Glyph Technologies, 800mbit_speed
Interval Since Last Panic Report: 301848 sec
Panics Since Last Report: 1
Anonymous UUID: 68CEF3A2-4EFE-D602-DB91-4A773D0A413B
Mon Jul 29 22:46:13 2013
panic(cpu 4 caller 0xffffff80028a20a6): "Spinlock acquisition timed out: lock=0xffffff8002ebebb0, lock owner thread=0xffffff80356dc340, current_thread: 0xffffff80364df000, lock owner active on CPU 0x0, current owner: 0xffffff80356dc340"@/SourceCache/xnu/xnu-2050.24.15/osfmk/i386/locks_i386.c:363
Backtrace (CPU 4), Frame : Return Address
0xffffff82ea652d70 : 0xffffff800281d626
0xffffff82ea652de0 : 0xffffff80028a20a6
0xffffff82ea652f10 : 0xffffff80028a199b
0xffffff82ea652f30 : 0xffffff8002865623
0xffffff82ea652fe0 : 0xffffff8002843df7
0xffffff82ea6530c0 : 0xffffff80028de568
0xffffff82ea653110 : 0xffffff80028de025
0xffffff82ea6531c0 : 0xffffff80028dd2db
0xffffff82ea6531f0 : 0xffffff80028dd487
0xffffff82ea653210 : 0xffffff8002ae7a26
0xffffff82ea653280 : 0xffffff8002b205ac
0xffffff82ea6532a0 : 0xffffff8002b21674
0xffffff82ea653340 : 0xffffff8002b1d600
0xffffff82ea653450 : 0xffffff8002b198fc
0xffffff82ea653500 : 0xffffff8002b196ca
0xffffff82ea653580 : 0xffffff800291366f
0xffffff82ea6535d0 : 0xffffff8002909d01
0xffffff82ea653610 : 0xffffff8002910a5d
0xffffff82ea653670 : 0xffffff8002910580
0xffffff82ea6536e0 : 0xffffff80028f44cc
0xffffff82ea653a40 : 0xffffff8002b40d3a
0xffffff82ea653aa0 : 0xffffff80028f535e
0xffffff82ea653af0 : 0xffffff800290905e
0xffffff82ea653b90 : 0xffffff80028fb839
0xffffff82ea653c40 : 0xffffff80028fc004
0xffffff82ea653f50 : 0xffffff8002be16aa
0xffffff82ea653fb0 : 0xffffff80028ce9c3
BSD process name corresponding to current thread: revisiond
Boot args: arch=x86_64
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000002600000
Kernel text base: 0xffffff8002800000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 17103336694
last loaded kext at 15943261762: com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4 (addr 0xffffff7f844d3000, size 16384)
loaded kexts:
com.uaudio.driver.UAFWAudio 4.1.1 16344
com.motu.driver.USBMidiKext 1.6 49190
com.uaudio.driver.UAD2System 7.1.0
com.motu.driver.PCIAudio 1.6 57985
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.kext.AMDFramebuffer 8.1.2
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.ATIRadeonX2000 8.1.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.4f2
com.apple.driver.AppleFireWireStorage 3.1.7
com.apple.driver.initioFWBridge 3.1.7
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.1.7
com.apple.driver.LSI_FW_500 3.1.7
com.apple.driver.Oxford_Semi 3.1.7
com.apple.driver.StorageLynx 3.1.7
com.apple.driver.PioneerSuperDrive 3.1.7
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleUSBAudiocom.uaudio.driver.UAFWAudio 4.1.1 16344
com.motu.driver.USBMidiKext 1.6 49190
com.uaudio.driver.UAD2System 7.1.0
com.motu.driver.PCIAudio 1.6 57985
Remove the third party uaudio and motu drivers then restart your Mac.
Once I restart from safe mode - the mac seems to start fine and I am using it without issue
Safe Mode only loads required kernel extensions which is why Safe Mode works, "without issue" ... -
Early 2008 mac pro won't boot from hdd when ssd is installed
I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month. -
My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.
there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc. -
Help. I recently bought a 2008 Mac Pro from Mac of all Trades. It came with Leopard 10.5 installed. When I set initially started the computer, I followed the instructions on the screen. I was asked to set up a password which I did. Since I'm very forgetful and not too tech savy, I wrote it down as I typed it in. I first went to install Office Mac 2011 but when it asks for a password, it won't accept the one I set up. I was told that if I bought the new Snow Leopard 10.6.3 and installed it, that it would reset everything. Well, it won't allow me to load it without the password. I am new to Apple - this is my first. I have always been able to "reboot" a computer with discs but I'm not sure how to do this one. Is there a way to do it without the password and reset everything? Could somone please email me
Thank You. David Moore
<Email Edited by Host>If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard. -
Multiple graphics cards on 2008 mac pro, won't work
Hi, I have a 2008 Mac Pro 2 x 2.8 GHz Quad Core Intel Xeon with 14 GB 800 MHz DDR2 FB-DIMM. I have used a ATI Radeon HD 2600 Graphics card connected to 2 x BenQ E2400HD screens. Now, I want 4 screens so I bought a NVidia Geforce 8800 GT graphics card as I found these to be compatible with my setup on Ebay (only place I could find it). Got it in a brand new condition in a Apple graphics card box so should be all good. Put it in PCI-E slot 2. Now when I started my Mac after installing I could hear a loud fan noise (fan going on max speed) and tracked it to the new graphics card. When I open the system profiler it shows up as a display. The screen connected to the graphics card with a DVDI-cable does not show an image and the screen indicates that it does not have an input. Any ideas what's wrong here? Is my graphics card broken?
More than likely you got wrong verion.
1,1 and 2,1 Mac Pros are EFI32, and for Nvidia cards need proper version.
If your machine is a 3,1 or later you need an EFI64 version.
Contact the seller and clarify.
If you install "ATY_Init" and are running 10.6.8 you will find the card will work once machine boots all the way.
You could then flash the card into proper version if you were especially clever with things like that.
But your seller should help you.
You need to know "Model Identifier"
http://macvidcards.com/macpro/which-mac-pro-do-you-own/ -
I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?
I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
Will upgrading of the GPU do the trick?
I'm curretly on Snow Leopard, will I be limited to Lion?
Kamal
my system info:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 13 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
Hardware UUID: 00000000-0000-1000-8000-00xxxxxxxx
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): G86334VTUPZ
Hardware UUID: 00000000-0000-1000-8000-0017F20153D2
Mountain Lion won't install.
Will this change or do I need to further upgrade the GPU.
Thanks In Advance!
--Dave K. -
My 2008 Mac Pro is no longer recognizing memory in the B card. Is it simply a defective card or should I look elsewhere for an answer? It was working unntil sometime early this year. Thank you for any enlightenment you can provide.
I'm not sure I understand. You swapped the A and B modules. The B module does not show up in the A modules slot? That would indicate the module is bad. If the A module doesn't show up in the B module's slot, then the slot is bad.
-
Why are there so many problems with the early 2008 Mac Pro ???
Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavangogo to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards" -
When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?
what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine. -
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
IPhone 5 no longer connecting to home wifi after adding new iPhone 5s
I just bought my husband a new iPhone 5s and successfully connected it to our home wifi; however, now my iPhone 5 won't connect. All other home devices will connect without an issue. I've tried Reseting the Network Setting on my iPhone and that does
-
Acrobat 9 pro extended question about saving -- yes
Hi guys, my problem is kinda simple: If i change a pdf document using acrobat 9 pro and save, it just saves at the original document I was opening. Of course, when I choose save to, it suggest the own documents folder. Problem now: If I change someth
-
How to load flat file containing data(separated by commas) into cube sapbi.
hi gurus, please help me with this question? i have some data in the flat file for example, address but with commas for ex: h.no:123,colony,area,hyd-59.now i have even other columns in this flat file like customer name,age.....i want to know ,how to
-
Help finding examples of simple signal processing - regressions, etc
Hello All, I was wondering if anyone has any examples of simple signal processing using the NXT (Labview 7.1 student edition with NXT plugin is what we're using). This would be for example, reading the distance from a wall with the ultrasonic sensor
-
SU10 mass changes with RSLAW_PLUGIN
Hello, Through SU10 i changed the account number.Then i restarted the measurement program. When i transfer the data into slaw . I am not getting the updated account number . Any idea to resolve this error ? Regards, kavitha