2008 r2 hyper-v guest with static IP always looses network connectivity after every restart - no problem with DHCP

Hello,
We are running 2008 R2 domain with one physical DC and other running in VM on Hyper-V host (2008 R2 Standard). The host has 4 NICs and is configured to use one physical NIC for itself (management) and the hyper-v guest is configured to use another dedicated/physical
NIC (through microsoft virtual switch) just for itself.
I noticed that after setting the hyper-v guest with a static IP address all works fine only until guest restart. When the guest boots up the IP address is still configured correctly in IPv4 properties, but there is no network connectivity at all and in fact
the guest shows running APIPA config in ipconfig /all output. That situation continues until I remove the virtual NIC from hyper-v guest, remove the virtual switch from dedicated NIC on host and then reconfigure it (using same settings as they were). very
annoying.
For time being I switched the virtual DC (problematic hyper-v guest) to a DHCP IP and configured DHCP server (running on physical DC machine, not on hyper-v host) to store a reservation for the hyper-v guest so it always gets the same "static"
IP configuration.
Is there some kind of a problem/bug with using static IP on (2008 R2) hyper-v guests? is there a hotfix for static IP config in hyper-v guest environment?
both 2008 R2 OSes (host and guest) are up to date with all updates (synced with Microsoft, not WSUS).

OK, I'm not at the office now, but took my time to test out the restart scenarios on problematic virtual guest remotely.
No dice, same as it was, everything works fine after guest has IP configured in DHCP mode (IP reservation of 192.168.1.5 for specific MAC address) and it doesn't work after restart in static IP mode (same address, works before restart of guest).
I also took "arp -a" outputs at each step from host server and that was always saying there is only a single host (192.168.1.5 = VDC = problematic virtual guest) assigned to that IP address and always with same MAC, so that pretty much rules out
ARP/MAC troubles and no issues with switches/routers getting spoofed. Problem is most likely with the virtual guest (WS2008R2) or within the host running same OS.
Here are outputs:
A) VDC has IP configured in DHCP mode - always same, survives through restart (all works)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : CD.lan
Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, January 30, 2014 5:34:48 PM
Lease Expires . . . . . . . . . . : Friday, February 07, 2014 5:35:26 PM
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.4.5
DHCPv6 IAID . . . . . . . . . . . : 268440925
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
DNS Servers . . . . . . . . . . . : 192.168.1.5
192.168.4.5
NetBIOS over Tcpip. . . . . . . . : Enabled
ARP -a output from host server at that time:
Interface: 192.168.1.4 --- 0xc
Internet Address Physical Address Type
192.168.1.5 00-15-5d-01-d3-00 dynamic
B) VDC has IP configured in static mode - BEFORE RESTART (all works)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 268440925
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
DNS Servers . . . . . . . . . . . : 192.168.1.5
192.168.4.5
NetBIOS over Tcpip. . . . . . . . : Enabled
ARP -a output from host server at that time:
Interface: 192.168.1.4 --- 0xc
Internet Address Physical Address Type
192.168.1.5 00-15-5d-01-d3-00 dynamic
C) VDC has the same IP configured in static mode - AFTER RESTART (no more network connectivity at all, LAN in Public zone)
Windows IP Configuration
Host Name . . . . . . . . . . . . : VDC
Primary Dns Suffix . . . . . . . : CD.lan
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : CD.lan
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-01-D3-00
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b9af:6679:3142:8799%13(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.135.153(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 268440925
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-6F-5F-C2-00-15-5D-01-D3-00
DNS Servers . . . . . . . . . . . : 192.168.1.5
192.168.4.5
NetBIOS over Tcpip. . . . . . . . : Enabled
ARP -a output from host server at that time:
Interface: 192.168.1.4 --- 0xc
Internet Address Physical Address Type
192.168.1.5 00-15-5d-01-d3-00 dynamic
Throughout the testing, the hyper-v host IP configuration and IPconfig output was always staying same.
The Network Connection #2 is the only one the host uses (not shared with hyper-v guests).
The Network Connection #4 is assigned to Microsoft Virtual Switch hence why it doesn't show up in results, like below:
Windows IP Configuration
Host Name . . . . . . . . . . . . : HYPER-V
Primary Dns Suffix . . . . . . . : CD.lan
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : CD.lan
Ethernet adapter Local Area Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter #3
Physical Address. . . . . . . . . : 9C-8E-99-52-15-91
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter #2
Physical Address. . . . . . . . . : 9C-8E-99-52-15-90
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::dc78:8a3b:38a5:7af3%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 312250009
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-67-52-8F-9C-8E-99-52-15-93
DNS Servers . . . . . . . . . . . : 192.168.4.5
192.168.1.5
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331i Adapter
Physical Address. . . . . . . . . : 9C-8E-99-52-15-93
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
On Monday I will install more test guests in Hyper-V host (WS2008R2), in variety of flavors like 7x64, 8.1x64, ws2012r2, and see if they show similar problems with static IP configuration when utilizing a dedicated NIC from host server.
Don't get me wrong, I can live with virtual DC running on DHCP IP reservation (which is based on MAC), because the virtual DC pretty much requires a physical PDC (hosting also DHCP in my network) to be present for safety reasons ... however I prefer a static
IP configuration on all servers, hence my question and surprise why it doesn't work.

Similar Messages

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be..

    I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be...
    I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

    I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

    Hi Suzy Q,
    I can send and receive calls.
    I get "messaging stopped" when doing a lot of texts.
    Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid  on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
    When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
    It runs slow.
    I have 5 apps on here. I should be able to have a  lot of apps on here, and play music, and have files, and...and....and.
    I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
    When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
    I get VZWAVS has stopped. (not sure if those are the right letters)
    The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
    I get a black screen on occasion.
    sometimes the proximity sensor doesn't work.
    sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
    I soft reboot often--turn it off wait a bit and

  • Sim problems- I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

    I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.

    arun kumar chenna123 wrote:
    i have updated my iphone to ios4.1. after installation, it is showing as"The SIM card inserted in this iPhone does not appear to be supported. only compatible sim cards from a supported carrier may be used to activate iphone. Please insert the sim card that came with your iphone...."
    how to solve this problem. I don't have any sim cards that came with iphone.
    Please help out to solve this problem.
    It sounds like the phone was hacked or jailbroken, and updating it locked it to the original carrier. As it is not possible to update to any version other than the current one (5.1) the fact that you updated to 4.1 pretty much confirms the phone was hacked. There is no solution that you can get in an Apple forum.

  • I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

    I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • HT5815 After update, i have problems with wifi

    after update, i have problem with wifi
    wifi always falls
    I get no internet access
    I have to reboot the system to return

    Information.
    Troubleshooting Wi-Fi connection issues - MacBook Air (Mid 2013)
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
    Go to Settings > WiFi and turn it OFF.
    Next go to General > Cellular > Cellular Data and turn it OFF
    Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
    Finally go back to General > Cellular > Cellular Data and turn it ON.
    I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
    Hope this helps!

  • Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

    im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

    i have been dealing with this same issue, tried to  turn off firewall and even turn of antivirud but still it gave me the same error.

  • Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
    Have you tried a reset on the iPad?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I have serious problems with I OS 6 - I am loosing internet connection after a few seconds or minutes. What can I do? Can I come back IO S 5.1.1.?

    I am experiencing serious problems after downloading iOS 6. I am loosing my connection after a few seconds/minutes. What can I do? Can you come back to 5.1.1.? How can I do that?

    You can't downgrade the iOS.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

    I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

    I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

    I think that is happening is that the microphone is on during this recording.  If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality.  If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
    I am still looking for the solution we all want, which is to save the audio in reasonable quality.
    Anyone out there with some ideas?
    Cheers,
    Rob

  • My iphone is not syching at itunes. Everytime it says your iphone as been diconnected whenever I try to synch it, while logo on phone and itunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5 with backup as well

    My iPhone is not synching at iTunes. Every time it says your iPhone as been disconnected whenever I try to synch it, while logo on phone and iTunes says it is still connected. help I have this problem with both my Iphone4 and Iphone5. This problem is with the back up as well.

    Hi singhgurwinder79,
    The article linked below provides details that can help troubleshoot this error and get your iPhone to sync correctly with iTunes.
    iTunes: Resolve USB-related alerts
    http://support.apple.com/en-us/HT203843
    Regards,
    Allen

  • Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud.  I have verified the settings.  I can access my iCloud account online but can't send or receive e-mail via the mail account.

    Text limits to the "Question" link prevents a full explanation:
    This is a long-time problem.  I have tried to resolve it with Apple but their "Customer Support" is merely a name.
    I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network.  Verify the settings for 'Apple Email' and try again.
    "The server returned the error:  The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
    Well, I have verified the setting and tried again and again and …
    Well, you get the idea …

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

Maybe you are looking for

  • Can you use VMware Fusion to run a windows 7 VM on an external hard drive

    I have the latest version of Mountain Lion running on a MacBook Air 11' with 4GB or Ram and an SSD of 128GB.  I have purchased the latest version of VMWare's Fusion Product. Since it takes up so much room to run on the SSD drive, I was wondering if i

  • Problem in variable

    hi, i created one variable of type customer exit zc00000n42 single value . ZC00000N39 is a variable of type manual input for date . let say ZC00000N39 = 30.04.2007 i need all values less than 01.04.2007 error in enhancement in cmod  : WHEN 'ZC00000N4

  • Outlining text in flash

    Hello, In Flash, is there an option for outlining a text? For example, I type a word & want to outline the word with 1px in black. I think it's called Stroke but I can't find it Thanks!

  • Enabling log4j for  a single class or package

    hi all If i use log4j for logging in my classes, is there a way for enabling it just for a single class or a packages? Considers that i use log4j.properties for configure it Regards Giovanni

  • PDF does not show 2 nodes

    Hi I have a pdf where under the main node that is  bound to the inetractive form, I have placed two notes. Each note is of cardinality 0.n. The problem I have is the following: when the pdf is created, only the first subform with the first node is fi