2008 R2 Hyper-V Integrated services error 61658...

Kind of got myself into a bad situation I think. I run a single Windows 2008 R2 Server w/SP1 that hosts 5 VM's that host two Windows Server 2003 SP2 machines and the rest are 2008 R2 Servers w/SP1. On one of the 2003 VM's I was having issues
with the mouse not being captured. I decided to reinstall the integrated services. The reinstall seemed to complete normally, but when it was done the mouse capture still did not work. So I rebooted just to check and still no mouse capture.
So I went into add remove programs and uninstalled it. I rebooted and then noticed the problems that caused. The uninstall made the VM lose the SCSI adapter and the NIC. So after getting a legacy NIC added I was able to be past that issue, but no
VHDs are accessible that were are connected to the SCSI Controller. When I try to install the Integrated Services, it gets part way through the "Updating Storport Driver" step and then throws this message: [ (X) An error
occurred: One of the update processes returned error code 61658.] This machine is our Active Directory (Domain) Controller. Again to mention, this is only machine out of the 5 that is having this problem. Any help would be greatly
appreciated.
PS: None of these are installed using Beta or RC's versions of the OS, the Hyper-V server and the VM's have all been in place for 2+ years working fine.
Thanks
Update: A friend of mine looked things over and found a vmg...log file that shows the problem is when the Integrated Services install try's to run the a KB that fails to installed: (KB943295). So I will investigate. But I did get the
server up and running again by adding a legacy network adapter and moving the two VHD files that were attached to the problem VM's SCSI controller to the VM's IDE controller. So a band-aid I know but at least I was able to get 41 users back working
after 7 hours of pulling out my hair! I do need to know I have this VM functioning 100% as it should so I'll continue to work on it.

Hi SScott2010,
Please try the following setps :
1. backup the problematic VM first
2. If the VM was migrated from virtual pc , please run "msconfig " --> click the boot tab then click advanced options --> select the Detect HAL check box
3. make sure the service " cryptographic service " is running automatically.
4. restart the VM
5. Install the hotfix of kb822798 in the problematic VM :
http://support.microsoft.com/kb/822798/en-us
6. try to install the Integrated Service again.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Hyper-V Integration Services - DriverPackage or Application

Hello SCCM community,
currently we are deploying the Driver for Hyper-V Integration Services (Windows6.x-HyperVIntegrationServices-x64.cab) as Driver Package. The deployment is OK. But if I look into Device Manager the drivers are not digitally signed. This is somehow
strange.
Deploying via DISM will result in same issue.
I did then a research and found out that the package can be deployed via Application by using the MSI file. http://social.technet.microsoft.com/Forums/en-US/dd58b4cf-a954-4525-9a05-a84ebb073002/install-integration-components-hyperv-30-with-sccm-2012?forum=configmanagergeneral
I tested the installation via MSI it works fine and the Device Manager is not complaining about not signed drivers.
Do you face the same issue? Are you also deploying via Application?
Many thanks in advance.
Guitarman

Ok, guys I did like described in the link. I used the setup.exe and deployed it as application.
As detection method I used one of the sys-files which where installed.
As uninstallation command I used: dism /online /Remove-Package /PackagePath:\\share\software$\Windows6.x-HyperVIntegrationServices-x64.cab
/norestart

Windows 2012 R2 hyper-v integration services update - error code: 50

Physical Host is a brand new Windows 2012 R2 with hyper-v role, VM is a Windows Server 2012
I try to upgrade the integration services update, VM become unresponsive and I lost connection to it, had to turn it off, afterwards it wouldn't boot.
Tried F8 on the reboot and then switched to the command prompt to manually upgrade the integration services running the setup, but got an error (Error code: 50 )
VM halts in the middle of booting up.
saying: Please wait ...
Anyone has any idea why it happened and how to fix this?

Hi Seyed,
Please try to follow the link below to install integration services manually :
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SBO Integration Service Error message

When entering into SBO 8.81 i get the next error mesage. I tried and made test of everything and is ok.
I got the next error SBO Integration Service authentication failed. Log off from the aplication; then log on and try again. If the problem persists, contact your system administrator.
Any suggestion ?

Would be interested to know if this ever got resolved as am seeing the same thing on my install -
W2008 server foundation R2 64bit
SQL 2008
SAP 8.81 PL06
Installed using B1iadmin username when prompted. Tried using B1i as had been advised and the install failed. Tried again using B1iadmin and install returned no errors.
Configured the landscape using local SQL settings - worked fine, configured remainder using B1iadmin and tested connection - worked fine. Tried with B1i and wouldn't even connect to the server.
within B1, am unable to swap license allocation between B1i and B1iadmin as keeps reverting back to license being issued to B1i.
only exterior symptom though is the error message reported regarding authentication

Integrations services error 4000 - integration services does not match the expected version

I have a 2 node high availability cluster built on 2012r2 DataCentre. One VM continually fails to backup and gives the event log error
"Hyper-V Volume Shadow Copy Requestor failed to connect to virtual machine 'QuadPro' because the version does not match the version expected by Hyper-V (Virtual machine ID 094B6B22-BBED-4D0B-8E47-D8D4D0D3F986). Framework version: Negotiated (0.0) -
Expected (3.0); Message version: Negotiated (0.0) - Expected (5.0). To fix this problem, you must upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu."
When I do the suggested action I get a message stating
"The computer is already running the current version of integration services (version 6.3.9600.16384)".
This VM was built through the failover management console under 2012r2. The VM in question is a 2008r2 standard server running a single database application.
Please advise.
Matt

Hi,
I have run the command using both nodes and get the following error:
PS C:\Users\*******> Get-VMIntegrationService -ComputerName node01 -VMName quadpro
Get-VMIntegrationService : A parameter is invalid. Hyper-V was unable to find a virtual machine with name quadpro.
At line:1 char:1
+ Get-VMIntegrationService -ComputerName node01 -VMName quadpro
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (quadpro:String) [Get-VMIntegrationService], VirtualizationInvalidArgum
   entException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMIntegrationServiceCommand
However I tried one of the other VMs for testing purposes (and to check syntax etc) and got the following success message.
PS C:\Users\******> Get-VMIntegrationService -ComputerName node02 -VMName appserver01
VMName      Name                    Enabled PrimaryStatusDescription SecondaryStatusDescription
Appserver01 Time Synchronization    True    OK
Appserver01 Heartbeat               True    OK
OK
Appserver01 Key-Value Pair Exchange True    OK
Appserver01 Shutdown                True    OK
Appserver01 VSS                     True    OK
Appserver01 Guest Service Interface False   OK

Hyper-V Integration Services Stopped

Hi,
I have looked thru the forums and seem to be hitting a dead end or my search skills are failing. Anyhow, I have 2 Windows 2012 R2 DataCentre hosts running. They are running Hyper-v exclusively. I just noticed the other day that all the services for Hyper-V
are stopped except for Virtual Machine Management. If I click on any of the stopped services, it will start up then promptly stop. It will give an error of:
The Hyper-V x service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. I have reviewed my Windows Event logs and there are no warning or errors.
Some other background, there is SCCM 2012 R2 (5.0.7958.1401) in the environment, but no SCCM agent is installed at the moment. There is also VMM 2012 (3.2.7672.0) and the agent for this is installed on both hosts. Both of the hosts have been re-imaged
in the last 2 months, so I don't think it's some weird age related weirdness. I also removed the hyper-v role from one of the hosts, rebooted and then re-added it. This made no difference. I also tried to add about of services to the restrictedservices in
the registry as I had come across this in the wild of the internet, but this made no difference.
Any thoughts, idea's?

Yes. As I explained. the Hosts are running an Bare Metal and not in a VM therefore these Integration Component services do not need to run.
The services you are calling out are specific to Windows when it is running within a VM. This is not a reflection of the hypervisor services that the Integration Components in the VMs hook in to.
In the settings of the VM you can enable the integration component presentation to a VM. And by default there is one option unticked. Check it.
And, on the host settings, enable Enhanced Session Mode.
(I believe that it is enhanced session mode that you are hunting for).
Also, you need to upgrade the Integration Components inside the VMs if you had not done that when you built them. Relying on what is packaged with the VM OS is not enough if the VM OS is older than the host.
Most likely what is happening is that the services are not enabled in the settings of the VM, or the ICs are not up to date within the VM. That is the most common cause for what you are observing, not some issue with the host.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

ETL Failure - Integration Service Error

Hi all,
Wondering if anyone has seen this error before.
ETL failed with this error message:
ERROR: Workflow custom workflow has not run on this Integration
Service before.
Nothing has changed with this workflow which has been running without error. We only have one integration service.
Thanks for reading.

2013-07-12 04:10:06.14 INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for ABC_SIL_Special_Programs
Error Code = 3:An error occurred in starting or running or stopping the
workflow or task.
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [9.1.0 HotFix2], build [357.0902], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2011
All Rights Reserved.
Invoked at Fri Jul 12 04:10:28 2013
Connected to Integration Service: [INT_PROD].
ERROR: Workflow [ABC_SIL_Special_Programs] has not run on this Integration
Service before.
Disconnecting from Integration Service
Completed at Fri Jul 12 04:10:29 2013
=====================================
ERROR OUTPUT
=====================================
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the
workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INT_PROD -d Domain_lx-xxxxx-p02p -u Administrator -p
**** -f ABC_Custom_SIL -paramfile
/opt/hrinfo/informatica/powercenter9.1/server/infa_shared/SrcFiles//DataWarehouse.DataWarehouse.ABC_Custom_SIL.ABC_SIL_Special_Programs.txt
ABC_SIL_Special_Programs
2013-07-12 04:10:29.207 INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL) has finished execution with Failed status.

Hyper-v integration services needs to be updated.

Recently we have moved few virtual machines to hyper-v core 2012 R2 (Free version) Now few virtual machines are showing below in hyper-v management console.
Do i need to update integration services as this message showing on virtual machines who are hosting mail server and database server. so after upgrading to latest integration services will it impact on VM's. Also
"Guest Services" option is unchecked. Do need to enable this as well.
Akshay Pate

Yes, you need to update integration service.
In Hyper-V Manager, double-click on a VM, click Action/Insert Integration Services Setup Disk, follow installation in the guest VM, reboot.
Guest Services allows you to copy files to a running VM without using a network connection. It's optional. Integration services need to updated regardless
of which ones you check/uncheck.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Hyper-V INtegration services for RHEL 7.0

Hi all,
I am trying to get OS and IP info on RHEL 7.0 on HYper-V 2012R2 but the data given is very consistent . I mean some times I get data and some times not .
The script output is copied below when it works correctly.
Caption :
Data : getaddrinfo failed
Description :
ElementName :
InstanceID :
Name : FullyQualifiedDomainName
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : NetworkAddressIPv4
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : NetworkAddressIPv6
Source : 2
Caption :
Data : 3.10.0-123.el7.x86_64
Description :
ElementName :
InstanceID :
Name : OSBuildNumber
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionData
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionName
Source : 2
Caption :
Data : 199168
Description :
ElementName :
InstanceID :
Name : OSKernelVersion
Source : 2
Caption :
Data : 7.0
Description :
ElementName :
InstanceID :
Name : OSMajorVersion
Source : 2
Caption :
Data :
Description :
ElementName :
InstanceID :
Name : OSMinorVersion
Source : 2
Caption :
Data : Red Hat Enterprise Linux Server ### OS Name
Description :
ElementName :
InstanceID :
Name : OSName
Source : 2
Caption :
Data : 129
Description :
ElementName :
InstanceID :
Name : OSPlatformId
Source : 2
Caption :
Data : 3.10.0
Description :
ElementName :
InstanceID :
Name : OSVersion
Source : 2
Some times same script give me less details missing OS info as below
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionData
Source : 2
Caption :
Data : 0
Description :
ElementName :
InstanceID :
Name : OSDistributionName
Source : 2
Caption :
Data : 199168
Description :
ElementName :
InstanceID :
Name : OSKernelVersion
Source : 2
Caption :
Data : 129
Description :
ElementName :
InstanceID :
Name : OSPlatformId
Source : 2
Let me know the correct place where i can open support ticket with Microsoft or any way for resolution?Thanks in advance,Rakesh

Hi Rakesh,
" To enable key/value pair (KVP) infrastructure, install the hypervkvpd rpm package from your RHEL ISO. Alternatively the package can be installed directly from RHEL respositories.
In Windows Server 2012 R2, the key/value pair (KVP) infrastructure might not function correctly without a Linux software update. Contact your distribution vendor to obtain the software update in case you see problems with this feature. "
For details please refer to following link:
http://technet.microsoft.com/en-US/library/dn531026.aspx
And the following forum is committed to Linux Integration Serivce for hyper-v :
http://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Essbase Integration Services Error Logic Implementation

Hi All,
We are using EIS for Member Load activity and populating the outline to Essbase for the cubes.
As part of this process we have the cbs file and bat script and we initiate the bat script for this activity.
Now, i want to see the Failure and Success of the Member Load into some other file and send a message for Success or Failure..
Moreover, i see the word 'synchronously' as part of success in general.
Did anyone implemented this anytime? If so kindly let me know how i need to check for the failures or Success
and will try to implement the same
Any help would be deeply appreciated...
Thanks...

This is a known issue in the EIS Version 11.1.1.3 and is fixed in EIS 11.1.2.1

Integration Services Fails to Update - Error Code: 1783

Hi All,
I moved a 2008R2 VM guest from a 2008R2 host to a 2012R2 host. Two other VM guests that I moved went without an issue.
When attempting to install the updated Integration Services for the third it errors...
Upgrade Hyper-V Integrations Services
A previous installation of Hyper-V integration services has been detected (version 6.1.7601.17514). Click Ok to upgrade this installation.
[I press OK]
During the process it makes it to: Installing Guest Components....then
An error has occured: One of the update processes returned error code: 1783
Any ideas how to resolve?

Hi Kisner,
"The KB 3004394 update that was dated December 10, 2014 can cause additional problems on computers that are running Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update
is available to remove KB 3004394 from your computer."
http://support.microsoft.com/kb/3024777
I would like to check the current state of this issue .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Thanks for the direct link Elton - that resolved the issue and I could install Integration Services without issue.
Thanks to you too Mark.

Error "To run a SSIS package outside of SQL Server data tools you must install task name used in package of Integration service or highter.

Hello Team,
I am trying to execute a SSIS package from web page. When i try to do that i am getting following error.
"To run a SSIS package outside of SQL Server data tools you must install <task name used in package> of Integration service or highter."
In my machine Integration Services are installed and its service is also in running state.
Please help me on this.
Thanks,
Ramesh
Thanks, Ramesh Arige

The SSIS package developed using SSIS 2008 Server R2 and Integrations Services 10.0 is exists in my machine. Is this wrong configuration, please help me on this.
I am using the below code copied from CodeProject
Thank you so much for responding.
Ramesh
Thanks, Ramesh Arige
Which way are you using from the provided blog? Using 1) C# Code or 2) C# and Stored Procedure?
Cheers,
Vaibhav Chaudhari
MCP, MCTS, MCSA (SQL Server 2012)

How to Install Integration service from hyper-v host to a virtual machine ?

i have around 100 Virtual Machine distributed on a cluster hyper-v cluster so i need to know how to install the upgraded version of integration service from the hyper-v host to all virtual machines
that has a mismatched version of the integration service using power-shell script ?

See this article:
PowerShell Script
for Automated Install of Hyper-V Integration Services in a VM running on Windows Server 2012 with Hyper-V V 3.0 Role using PowerShell Remoting
Mike Crowley | MVP
My Blog --
Planet Technologies

Bug in HyperV Integration Services 6.3.9600.16384 ?

Hi,
I just deployed a VM (Generation 1) hosted on a 2012 R2 Datacenter-Hypervisor. For deployment I used WDS and the VM had a "Legacy Network Adapter". Deployment works fine. After deployment I installed Hyper-V Integration Services (Version 6.3.9600.16384).
Then I shutdown the VM, removed the Legacy network adapter and added a "normal" network adapter and started the machine again. I noticed that the network-connection is down.
When I check the properties it says "This device cannot start. (Code 10)".
I tried to uninstall the Adapter, I tried to remove the adapter and add a new one - no change. Even I redeployed the VM completely new...same problem...
Does anyone know this issue?
Regards
Miranda

Hi just a couple of question, what O.S version is you VM running. ? what system did you build your VM on ?/
Try removing and re-installing the integration services on the Virtual Server. make sure it completes with no errors.
you might need to force your VM to detect the new HAL.
To change the HAL
Open the System Configuration utility (MSConfig.exe). To do this, click
Start, click Run, type msconfig, and then click
OK.
Click the Boot tab, and then click Advanced options.
Select the Detect HAL check box, click OK, and then restart the virtual machine.
Important
Changing the HAL will usually trigger an operating system reactivation.

Using DISM Cmdlets to upgrade Hyper-V Integration Components

Hi guys,
I'm using the Deployment Imaging Servicing Management (DISM) Cmdlets to programmatically upgrade Hyper-V integration components as VMs move about my environment. My code works fine, but I have a little issue:
I'm using a call to 'Add-WindowsPackage' to slipstream in the CAB package in. This works, but sometimes 2008 R2 VMs will immediately boot into the system recovery console -seemingly for no reason. This never happens with 2012 R1 or R2 VMs. This obviously
makes this process not unattended, and I want it to be totally unattended (with reporting to catch stuff).
Does anyone know a.) when this is happening and b.) can I somehow remove this recovery boot flag, is it like the dirty bit?
The weird thing is if I just progress into the recovery console something is changed in the VM and then it will boot just fine. There isn’t a problem with the IC upgrade, but something thinks there is. The logs for the DISM cmdlets are no help.
I don’t have System Centre and wont be using it, FYI.
Cheers!

Hi Hob,
Just a little clarification, Please also make sure you had added the right Integration Services package version to WIM file, because each version has a different installation package, it is very important that you select the correct package for the appropriate
OS.
Refer to:
Deploying Hyper-V Integration Services to VMs using Config Manager and DISM:
http://blogs.technet.com/b/manageabilityguys/archive/2013/09/05/deploying-hyper-v-integration-services-to-vms-using-config-manager-and-dism.aspx
If I have any misunderstanding, please feel free to let me know.
Best Regards,
Anna Wang

2008 R2 Hyper-V Integrated services error 61658...

Similar Messages

Maybe you are looking for