2008's MacBook Pro needs a new battery?

Hi!
My client said his four years MacBook Pro's old battery doesn't last long these days -- about 20 minutes and then shuts off. No warnings or anything. Even the status show 25% battery power left. Does this old MBP need to get a new battery or need to reset/fix the charge status? If it just needs a reset/fix, then what's the best/correct way to do that? Also, Mac OS X 10.5.8 has all the updates. If it needs a new battery, then what's the best place to get a new one in Los Angeles/L.A. or Orange County/O.C. area? From a local Apple store?
Thank you in advance.

eww wrote:
Don't buy a cheapo — they are usually worthless junk. Try here:
http://www.lacomputercompany.com
Or any Apple Store. Fry's, Radio Shack and Costco won't have them. Best Buy does, but speaking for myself, nothing could induce me to buy anything there.
Thank you. Is there a specific battery model to buy for this old MBP? Hmm, maybe it is just easier to go to a local Apple store and get a battery replacement and to get help (especially when bringing in the old MBP) from one of the Apple store guys (hopefully, expired AppleCare won't matter).
FYI to everyone. Here is what it says when running on battery right after seeing 97% charge in Mac OS X 10.5.8's System Profiler (note the check battery status):
Battery Information:
Model Information:
Serial Number:        Sony-ASMB012-38f9-d6e9
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code:        0000
PCB Lot Code: 0000
Firmware Version:     0110
Hardware Revision:    0500
Cell Revision:        0303
Charge Information:
Charge remaining (mAh):       1993
Fully charged:        Yes
Charging:     No
Full charge capacity (mAh):   2092
Health Information:
Cycle count: 79
Condition:    Check Battery
Battery Installed:    Yes
Amperage (mA):        -1142
Voltage (mV): 11963
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes):   10
Display Sleep Timer (Minutes):        30
Automatic Restart On Power Loss:      No
Wake On AC Change:    No
Wake On Clamshell Open:       Yes
Wake On LAN: Yes
Display Sleep Uses Dim:       Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes):   10
Display Sleep Timer (Minutes):        1
Wake On AC Change:    No
Wake On Clamshell Open:       Yes
Display Sleep Uses Dim:       Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:        No
AC Charger Information:
Connected:    No
Charging:     No

Similar Messages

My macbook pro won't hold a charge for more than a day...do I need a new battery?

my macbook pro won't hold a charge for more than a day...do I need a new battery? I have a 13" early 2011 model.

A: did you leave most of the time or always plugged in?
B: did you often drain the battery very low?
If so, then thats the issue
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

Does my 2008 macbook pro need adobe flash player and why is it so slow?

I was at another question and they had recommended downloading EtreCheck to get their question.
I am trying to find out if I need Adobe flash player installed?
Also, my Macbook Pro works fine online for speed, but opening any applications (pages, numbers, iPhoto,) anything installed is painfully slow.
It plays youtube just fine.
EtreCheck version: 1.9.14 (50)
Report generated August 19, 2014 at 9:02:17 AM PDT
Hardware Information: ?
MacBook Pro (15-inch, Late 2008) (Verified)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information: ?
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 41 days 19:36:34
Disk Information: ?
Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (153.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-868
USB Information: ?
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.WondershareAudioDevice (1.5.2) Support
Startup Items: ?
HP IO: Path: /Library/StartupItems/HP IO
Problem System Launch Daemons: ?
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.wondershare.AllMyMusic.Agent.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
To-do Lists
BusyCal
Mail
QuickCal1522
BusyCalAlarm
NotesTab
Calendar
AdobeResourceSynchronizer
ElementsAutoAnalyzer
Printer Pro Desktop
HPEventHandler
HP Scheduler
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 6.0 Support
GarminGpsControl: Version: 4.0.1.0 Release - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Silverlight: Version: 5.0.61118.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 232.09 GB Disk used: 89.03 GB
Destinations:
LaCie [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 43
Oldest backup: 2012-10-31 19:04:59 +0000
Last backup: 2014-08-15 01:30:09 +0000
Size of backup disk: Adequate
Backup size 465.44 GB > (Disk used 89.03 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      4% WindowServer
      1% AllMyMusicAgent
      0% fontd
      0% coreaudiod
      0% softwareupdated
Top Processes by Memory: ?
115 MB Mail
61 MB Safari
49 MB Finder
49 MB WindowServer
45 MB com.apple.WebKit.Networking
Virtual Memory Information: ?
34 MB Free RAM
838 MB Active RAM
814 MB Inactive RAM
663 MB Wired RAM
17.56 GB Page-ins
2.53 GB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

2008 early macbook pro battery normal and charging but stays at 0% Won't charge.Model Information:   Serial Number:     ˇ   Manufacturer:     SMP   Device Name:     ASMB012   Pack Lot Code:     4   PCB Lot Code:     0   Firmware Version:     0dc0   Hardwa

2008 early macbook pro battery normal and charging but stays at 0% Won't charge.
I have reset the SMC and PRAM
The charge light is orange on the magsafe charge cord.
Do I need new battery or is it a hardware issue?
Model Information:
Serial Number:          ˇ
Manufacturer:          SMP
Device Name:          ASMB012
Pack Lot Code:          4
PCB Lot Code:          0
Firmware Version:          0dc0
Hardware Revision:          0
Cell Revision:          0
Charge Information:
Charge Remaining (mAh):          0
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          4008
Health Information:
Cycle Count:          125
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          8459
Message was edited by: mcj2112

Reset the SMC > http://support.apple.com/kb/HT3964
It's clear that the battery has got enough capacity to work correctly, so something happens with the MagSafe port or its charger. If you have another charger, try it, and if not, take the MacBook and the charger to an Apple Store or reseller. It's better to do this as we don't know if the problem is in the charger or in the MacBook Pro

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

2008 Gen Macbook Pro battery constantly drains

I have a 2008 era Macbook Pro (it's the one that's last of the aluminum keyboard generation)
Sometime in the middle of 2010, the battery started bubbling out of its encasing eventually to the point where my laptop was no longer stable. The battery also never held a charge unless plugged in.
So I replaced the battery with a new one, and it was fine for about a month or two. Then the same thing happened -- the battery doesn't hold a charge. It's at the point now where the laptop no longer powers on.
I'm worried if I simply replace the battery again that this same thing will happen again. Does anything have any ideas or thoughts on fixing this?

So you think this is related to the battery?
Yes, the battery was brand new when I bought it -- in the Apple packaging and all.

HT3224 What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to the new one. How do I make bootable clone of Bootcamp?

Hi I just got a new MacBook Pro I need help transferring Bootcamp (Windows XP) from my old Macbook Pro to my new Macbook Pro Mac OS X 10.7.4 2.6 Ghz Intel Core 17. How do I make bootable clone of Bootcamp?

you can't just move XP even if you took the hard drive and have Windows boot and function.
Apparently there are Windows tools to sanitize the OS and strip all the motherboard drivers and services.
Time to get a supported OS. Don't want to pay, then use 8 for the time until it goes on sale.
There are no drivers for even Vista on 2011 and later Macs.

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

Macbook shuts down without charger plugged in, does need a new battery or is it something else? thx

My macbook works with the charger plugged in but even when it shows it charged without the charger it shuts down. Does it need a new battery or is it something else. How do i check battery life?

It probably needs a new battery. Check your battery info by clicking the Apple menu and select about this Mac, then either click more info or system report depending on which version of OS X you're running.

Dear CCC, Hi, I bought a refurbished Macbook 4,1 at present it is running Lion 10.7.5( although it is an older machine circa 2008) I would like to transfer everything from my old machine( early intel Macbook Pro) to the newer machine. My older machine run

Dear Friends,
Hi, I bought a refurbished Macbook 4,1 at present it is running Lion 10.7.5( although it is an older machine circa 2008) I would like to transfer everything from my old machine( early intel Macbook Pro) to the newer machine. My older machine runs Mac OS x 10.6.8 and that allows me run some very old software. Should I make a time machine back up?and restore from that or use Carbon Copy Cloner? to transfer everything, the system, applications and data.
Thanks for your help
-Walt

Here you go:
Connect the two using a Firewire cable. Boot the newer machine in Target Disk Mode. Boot the older one normally. The disk for the newer machine will appear on the older machines's Desktop.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select newer machine's hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Clone using Restore Option of Disk Utility
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Select the destination volume from the left side list and drag
it to the Destination entry field.
4. Select the source volume from the left side list and drag it to
the Source entry field.
5. Double-check you got it right, then click on the Restore button.
Destination means the newer machine's drive. Source means the internal startup drive.

I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?

My Macbook Pro fell off my bed (approx. 3ft) and dented the left side of the front left corner on the battery meter. Besides the damage everything seemed okay for a little while until I kept getting a erratic curser track pad. I kept cleaning it thinking some dirty or oil may of got on it or in the edges, but long story short I found out my battery is swollen and thats the reason for the erratic curser. The drop and dent impacted the battery causing it to swell. I feel that I just need a new battery. I purchased my macbook from the apple store and still have applecare. However I've researched online a bit and saw some people posted that if you drop your macbook, Apple will void my coverage. I also read that when people have had a swollen battery and applecare, they just brought it into the Genius bar and they went to the back and brought them a new battery. I've been super nervous to go see them as I've spent the extra bucks on Applecare and did not get any use of it. If anyone has had this issue or knows about it, please let me know!!
MacBook Pro 13" 2012, Mac OS X (10.9.3)

I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?
Yes !
I would take it in before it gets worse and breaks something.
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

My Macbook Pro loses power with battery down to 85%

I have had this problem for about two weeks. My Macbook Pro runs fine when attached to the power adapter, but when it is on battery power, no matter what applications I am running, the computer suddenly turns off after about 10 minutes when the battery reads about 85% charge. It will not restart until it is reattached to the power adapter. The computer is from about 2006 and has the original battery.
I ran diagnostics and it says the battery is working okay. I ran the utilities application to see how much CPU was in use, and it was only about 5% for all CPU capacity, and none of the running applications seemed to be using much of the hard disc.
I am planning to go to the Apple Store, I suspect they will tell me I need a new battery. Can it be tested at the Apple store out of the computer? Can I test it at home with my home voltmeter?

This is a sign of a battery that has reached the end of its life and needs to be replaced. Getting nearly nine years of use from a consumer rechargeable battery is a small miracle, congrats!

What's the best way to transfer an old 15" MacBook Pro to a new MacBook?

Hello.
My client will be buying a new MacBook soon (don't know which model yet) from his university. We are currently researching and planning ahead to minimize problems and prepare. I noticed there are multiple ways to transfer data from his old 15" MacBook Pro to the new one. What's the best and fastest way?
We only need to (manually?) copy data (lots of documents, photographs/photos., etc.) and not the programs (better to start clean!). Also, will old Mac Office 2008 work in the latest Mac OS X version (assuming it comes with it or maybe 10.7.x) or will he need to buy a new one? He also uses an iPhone 4S and iPod Touch (music mostly).
Thank you in advance.

Kappy wrote:
How to use Migration Assistant to transfer files from another Mac
If you only need to transfer files then connect the two via Firewire cable and use Target Disk Mode to access the old computer's hard drive from which you can select and copy the data you need.
Office 2008 will work, but it would be better to upgrade it to Office 2011. If you want a seamless changeover with respect to the iDevices, then you need to transfer the entire /Home/Library/Music/iTunes/, /Home/Library/Music/iTunes Playlists/, /Home/Library/Music/imm Media/ folders to the /Music/ folder of the new computer. Also copy over the /Home/Library/Preferences/com.apple.itunes.plist file to the /Home/Library Preferences/ folder on the new computer.
Be sure you de-authorize the old computer: iTunes Store- About authorization and deauthorization. Be sure to do this before any of the above is done.
Firewire, we don't have any of those cables and devices unless the new MacBook comes with it? It's all USB(2). Can we use USB (yes, it is slower)? He use it for digital cameras, Time Machine backups in Mac OS X 10.5.8, etc.
OK, I will tell my client to get a new Office 2011 then to avoid the mess. Hmm, can't we just synchronize our iDevices with iTunes to copy back to the new MacBook's new HDD?

2008's MacBook Pro needs a new battery?

Similar Messages

Maybe you are looking for