[2008R2] Prevent event : The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time
During the restore of data using VSS Snapshots it deleted all the snapshots, this event was written in the system log :
The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time. Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.
It only restored 20 GB of data and there should be plenty of space in the Shadow copy storage
Used Shadow Copy Storage space: 2.692 GB (0%)
Allocated Shadow Copy Storage space: 5.397 GB (0%)
Maximum Shadow Copy Storage space: 694.752 GB (18%)
When there isn't enough space it should start to delete the oldest snapshots to free up additional space, but it deleted
all the snapshots. The problem is the IO but how to prevent this from happening again?
Hi,
Since the shadow copy storage space doesn’t run out, the issue could be due to the Volsnap.sys driver has encountered excessive I/O activity.
You could refet to the article below to resolve the issue. This article is for Windows 2003 but it will also help on Windows 2008 R2 system.
Error message when a Windows Server 2003-based computer has a high level of I/O activity: "The shadow copies of volume Volume_Name were aborted because the diff area file could not grow in time"
http://support.microsoft.com/kb/925799
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
The shadow copy of volume E: were aborted because the shadow copy storage failed to grow
Hello there,
I am facing an issue regarding DPM 2010 backup.
Every time my tape backup is being failed and the error is "The shadow copy of volume E: were aborted because the shadow copy storage failed to grow" .
My protected server is an win 2008R2 File server which is getting backed up from DPM 2010 server.
The total space of E: is 700 GB out of which 750 MB space is free.
So i am quite confused how much space should be free in protected server drive for successful backup.
It would be great if someone could help me regarding this matter.
Thanks in advance.
Regards, IshuvHello,
Though it is written that minimum space required is 300 MB but i still do have 700 MB free out of 759 GB in my protected server drive (E:).
The error detail is ;
Source: Volsnap
Event ID: 35
Error General: "The Shadow copies of volume E: were aborted because the shadow copy storage failed to grow."
The backup server is DPM 2010 attached with IBM tape library which have LTO 5 cartridge.
Protected server is Win2k8R2 file server. 'E:' drive total space is 759 GB in which 700 MB is free.
So , as per my understanding from the error above is VSS is unable to grow because of limited free space in the specific E drive. In Drive (E:) there is only 700 MB space free. Now my question is how much free space should be there in the protected server
drive to complete the backup successfully by the DPM 2010 server which is storing the backups in IBM LTO5 tape library.
Is there someone who had faced this issue. Please help!!
Regards,
Ishuv
Regards, Ishuv -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
I plugged my ipod shuffle first generation into my work computer (PC) and itunes deleted all the songs because of auto sync. I had checked the box to not sync with the itunes library because there were no songs in the library. But I guess auto sync was still turned on, and it "synced" all the songs off of my ipod. Are these songs recoverable anywhere or are they just gone?
Thanks,
Frustrated UserThe 1st gen (and 2nd gen) iPod shuffle does not have a mode where it automatically syncs to your iTunes library. It uses manual loading all the time (or the Autofill feature). So iTunes did not delete its content because of automatic syncing.
However, it can only be used with one iTunes library at a time. So, if you connect it to a different computer (with a different iTunes library), its existing content is erased. You should get a warning so that you can back out.
If you started using the shuffle with a different iTunes library, the songs that were on it are gone.
NOTE: The 3rd and 4th gen shuffles are different, and work more like the other "big" iPods. If it is set for Manually manage music, you can connect it to a different iTunes library without erasing the existing content. -
Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
Thank you.Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html -
i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.
hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]] -
I continually get this message: The TM could not complete backup. The backup image "/Volumes/Data/....'s computer_001ec21b890f.sparsebundle" could not be accessed (error 1).?
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so. -
Photos in the camera roll of "iPhone cannot be imported because the device is locked with a passcode. Tried just about everything - suggestions?
Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them. -
Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Crishello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej. -
Wrongly posted in iPhoto forum, should probably be posted here instead.
I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them. -
The action (restore User State) has been skipped because the condition is evaluated to be false.
Hello,
At one time my OSD Task Sequence captured network settings and User state (documents, settings, etc) from a refreshed system (same pc), but now it doesn't. In Task sequence I am getting "The action (restore User State) has been skipped because
the condition is evaluated to be false."
==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Executing task sequence OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
Debug shell is enabled OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Successfully enabled debug command shell support. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Configuring local administrator account OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Re-assign all drive letters... OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
The drive information which has no drive letter can not be found. No need to re-assign driver letters. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Installing SMS client OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Client already installed. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Moving logs to SMS client directory OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Successfully moved logs to SMS client log directory: C:\WINDOWS\CCM\Logs\SMSTSLog OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Executing task sequence manager bootstrap OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
Executing command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Current OS version is 6.1.7601.1 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Logging successfully initialized. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Resuming Task Sequence in Full OS TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
We are going in GINA and potentially need to set the authenticator TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
==========[ TsProgressUI started in process 1952 ]========== TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Registering COM classes TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
sbModulePath = C:\WINDOWS\CCM\TsProgressUI.exe TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Unregistering class objects TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Shutdown complete. TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
Process completed with exit code 0 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Successfully registered TS Progress UI. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Found network adapter "Intel(R) Dual Band Wireless-AC 7260" with IP Address 0.0.0.0. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Found network adapter "Intel(R) Ethernet Connection I218-LM" with IP Address 169.254.45.132. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Starting Task Sequence Manager. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
executing TS Manager not in full media TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
executing TS Manager in c:\windows\ccm TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Executing command line: "TsManager.exe" TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
Successfully intialized Logging for TS Manager. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Commandline: "TsManager.exe" TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/service parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/standalone parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
/noclient parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Successfully registered Task Sequencing COM Interface. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Executing as a standalone exe TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Initializing TS Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Opening Task Sequencing Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Path variable OSDisk converted from 28A047320000401F00000000: to C: TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
NOT executing in WinPE TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling Config policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling config policies... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SysHealthConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 684, uncompressed size 4648. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SoftUpdConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1926, uncompressed size 19238. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling SoftDistClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1331, uncompressed size 13736. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling NAAConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 1026, uncompressed size 6490. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling RebootSettingsConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 433, uncompressed size 1554. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Compiling AppManClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Decompression (zlib) succeeded: original size 983, uncompressed size 6354. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Get Install Directory for SMS Client TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 436 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
8:55:50 AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:FSC") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:50
AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:51
AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 9 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
RequestedConfig policy instance(s) : 42 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
8:55:51 AM 1624 (0x0658)
There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Total RequestedConfig policy instance(s) : 487 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
New/Changed ActualConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Policy evaluation initiated TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
Query = 'CCM_SoftwareDistributionClient
Thanks in Advance,
MarkYou need to determine why USMTLOCAL is being set to "True". . .
It is set to Not Equal to True.
Evaluating a variable condition expression TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Variable = OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Value = TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Operator = exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
Expand a string: TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The variable condition expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The AND expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
The action (Restore User State) has been skipped because the condition is evaluated to be false TSManager 3/31/2015 8:56:23 AM 1624 (0x0658) -
Hi
I have 1 rootCA and 1 subordinate CA. I removed one of the locations to publish CRL and after that the ADCS service can't start. I get the warning first:
Revocation status for a certificate in the chain for CA certificate 2 for siu-SRVDC01-CA could not be verified because a server is currently unavailable. The revocation function was unable to check revocation because the revocation server was offline.
0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
And then the error:
Active Directory Certificate Services did not start: Could not load or verify the current CA certificate. siu-SRVDC01-CA The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE).
I've read many threads with similar problems but I can't find the solution. The CDP is online. I've run "certutil -url cert.cer" to verify the CDP and AIA and everything is fine. But the service is still not starting.
See this command too:
C:\>certutil -verify -urlfetch subCADC01.cer
Issuer:
CN=siu-SRVDC02-CA
DC=siu
DC=domain
Name Hash(sha1): 152a7c43f186d9179c1c3256d3a1a0af4a9df892
Name Hash(md5): b409e417a38bbe04b5800512bd94efac
Subject:
CN=siu-SRVDC01-CA
DC=siu
DC=domain
Name Hash(sha1): 5ee421b84c3b18ff134cf2e42226853d78d3409b
Name Hash(md5): e1a454692361733e45dad374dc14cae3
Cert Serial Number: 1e0000022c707c76c0a27b315700000000022c
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT (0x40000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 1 Hours, 2 Minutes, 16 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 19.03.2015 11:18
NotAfter: 19.03.2017 11:28
Subject: CN=siu-SRVDC01-CA, DC=siu, DC=domain
Serial: 1e0000022c707c76c0a27b315700000000022c
Template: SubCA
a1a8a95464c5b586da6e9b304142d59fc5a22ae0
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] http://wwwca/CertEnroll/srvdc02.siu.domain_siu-SRVDC02-CA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (26)" Time: 0
[0.0] http://sharepoint.siu.no:8088/siu-SRVDC02-CA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 26:
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
ThisUpdate: 19.03.2015 11:10
NextUpdate: 15.09.2015 23:30
e2ee543a68214f9b99dda2e9f58b1ddfc34429d1
CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=siu-SRVDC02-CA, DC=siu, DC=domain
NotBefore: 23.09.2011 13:00
NotAfter: 23.09.2021 13:10
Subject: CN=siu-SRVDC02-CA, DC=siu, DC=domain
Serial: 60fc459ebdefa5b646a081b0c21c259d
4ea8bb95b0038c69a83c939e8a54f892cd0b5056
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
Exclude leaf cert:
691f7e42f5c4a86d03b7225bf7303369ef6dcc7e
Full chain:
17e5b9477a1736c33dc0ff245e7b06de5b958c4c
Verified Issuance Policies: None
Verified Application Policies: All
Cert is a CA certificate
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
Any clue?It looks like it is trying to get the CRL using LDAP. It is quite strange since no ldap entry is on the subordinate CA,
only an HTTP address:
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
I have checked that object using adsi Edit and the permissions seem ok. Also there is a value on both attributes: certificateRevocationList and deltaRevocationList.
This problem happened after I removed the LDAP entry for the "CRL Distribution point" from the sub CA properties. Should I add back the LDAP entry?
Log Name: Microsoft-Windows-CAPI2/Operational
Source: Microsoft-Windows-CAPI2
Date: 19.03.2015 14:42:07
Event ID: 11
Task Category: Build Chain
Level: Error
Keywords: Path Discovery,Path Validation
User: SYSTEM
Computer: srvdc01.siu.domain
Description:
For more details for this event, please refer to the "Details" section
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" />
<EventID>11</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>11</Task>
<Opcode>2</Opcode>
<Keywords>0x4000000000000003</Keywords>
<TimeCreated SystemTime="2015-03-19T13:42:07.481533500Z" />
<EventRecordID>131</EventRecordID>
<Correlation />
<Execution ProcessID="6288" ThreadID="5472" />
<Channel>Microsoft-Windows-CAPI2/Operational</Channel>
<Computer>srvdc01.siu.domain</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<CertGetCertificateChain>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<ExtendedKeyUsage />
<Flags value="40000000" CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT="true" />
<ChainEngineInfo context="machine" />
<CertificateChain chainRef="{60B61582-1C3C-4B58-AE8C-70278ADEE402}" revocationFreshnessTime="P2DT21H13M20S">
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="100" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ChainElement>
<Certificate fileRef="E02AA2C59FD54241309B6EDA86B5C56454A9A8A1.cer" subjectName="siu-SRVDC01-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="1000040" CERT_TRUST_REVOCATION_STATUS_UNKNOWN="true" CERT_TRUST_IS_OFFLINE_REVOCATION="true" />
<InfoStatus value="102" CERT_TRUST_HAS_KEY_MATCH_ISSUER="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage />
<RevocationInfo freshnessTime="P2DT21H13M20S">
<RevocationResult value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</RevocationResult>
<StrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<DeltaStrongSignProperties signHash="RSA/SHA1" issuerPublicKeyLength="2048" />
<CertificateRevocationList location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?certificateRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="DEEB557897A9FEA217DF83D95BF24CA54051B1CF.crl" issuerName="siu-SRVDC02-CA" />
<CertificateRevocationList deltaCRL="true" location="TvoCache" url="ldap:///CN=siu-SRVDC02-CA,CN=srvdc02,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=siu,DC=domain?deltaRevocationList?base?objectClass=cRLDistributionPoint"
fileRef="58A2CDBC7A238DDD76EEFEDE354A04596F5AED71.crl" issuerName="siu-SRVDC02-CA" />
</RevocationInfo>
</ChainElement>
<ChainElement>
<Certificate fileRef="56500BCD92F8548A9E933CA8698C03B095BBA84E.cer" subjectName="siu-SRVDC02-CA" />
<SignatureAlgorithm oid="1.2.840.113549.1.1.5" hashName="SHA1" publicKeyName="RSA" />
<PublicKeyAlgorithm oid="1.2.840.113549.1.1.1" publicKeyName="RSA" publicKeyLength="2048" />
<TrustStatus>
<ErrorStatus value="0" />
<InfoStatus value="10C" CERT_TRUST_HAS_NAME_MATCH_ISSUER="true" CERT_TRUST_IS_SELF_SIGNED="true" CERT_TRUST_HAS_PREFERRED_ISSUER="true" />
</TrustStatus>
<ApplicationUsage any="true" />
<IssuanceUsage any="true" />
</ChainElement>
</CertificateChain>
<EventAuxInfo ProcessName="certsrv.exe" />
<CorrelationAuxInfo TaskId="{54E4FCD3-E70A-4024-BB81-6A053EAACE21}" SeqNumber="9" />
<Result value="80092013">The revocation function was unable to check revocation because the revocation server was offline.</Result>
</CertGetCertificateChain>
</UserData>
</Event> -
When I take pictures using the front camera the photo saves as if it were flipped in the opposite direct. How do I get it to saved as the picture was originally taken?
If you are talking about landscape pictures, hold the phone so the camera is at the top and the volume buttons on the bottom. If you hold it with the volume buttons on the top, the camera is upside down.
-
iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows VistaI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction.
Maybe you are looking for
-
In FF29, clicking on tabs does nothing
After installing FF29 strange things had changed. 1. The yellow button in the upper left corner, used instead of the menubar, had disappeared. 2. The tabbar cannot me moved to below the bookmarks bar. 3. The chrome of all tabs is identical and border
-
I can copy a page and paste it into word and it prints fien. I can print all word documents, Excel document, powerpoint documents, PDF documnets stored and opened from Adobe acrobat, but not PDFs while still online. I have reloaded the printer driver
-
What setting changes are to be made??
I am adding some .c files to my MAC application(cocoa), I am getting a lot of errors while compiling those files. What setting changes are to be made before adding C files to MAC OS project??? If so can anyone point out that...?? 1. I am getting
-
P35 Neo2-FR with e8400 Got 4.3ghz, but not 4.5ghz HELP!
I got an e8400 with my neo2-fr board. I achieved 4.3ghz stable, but I cannot seem to get 4.5ghz no matter what I try. I have a picture of my Cell menu: http://www.xtremesystems.org/forums/showthread.php?p=2807948#post2807948 Here are my Specs: Case:
-
Is it possible to import an Oracle 10 (export .dmp file) into Oracle 9 db ?
hi Oracle Guru's Is it possible to import a oracle 10 (export .dmp file) into an oracle 9 database ? I tried & got the following error ... IMP-00010 not a valid export file, header failed verificationperhaps their is a work-around ? thanks