2009 Mac Pro Quad Will Not Boot

Hi.
I have a 2009 Quad 3.0Ghz Mac Pro that will not boot up.
I went to it this morning and the beach ball was spinning. I could not get it to stop and as a last resort, turned it off. It has been working fine, although
I have noticed a little slow (Could be me, though).
When I tried to reboot it, it tried to start, chime went off, but it stayed on the light grey screen and eventually, it had a folder with a question mark in it
that blinked.
I disconnected all peripherals, no change.
Tried to boot from the optical drive with Disk Warrior, no change.
Anybody have any ideas?
Thanks in advance for any help.
Brian

The Chime is generated in Software when the first part of the Power-On Self Test has passed. If an appropriate source of software can be found, booting is likely.
it had a folder with a question mark in it that blinked.
That says it could not find the last-specified source of software. the drive may be damaged, or it may have forgotten where it should be looking.
Tried to boot from the optical drive with Disk Warrior, no change.
Next try a 10.6 DVD. "A Mac that cannot boot from an appropriate Installer/Utilities DVD has a Hardware problem".
One of the simplest things it should be able to do is Startup Manager. Hold down the Alt/Option key at startup and it should draw a gray or blue screen and slowly draw an Icon for each potentially-bootbale device (including a bootable DVD, if inserted).

Similar Messages

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

Mac Pro 2013 will not boot up

After Power on, the Mac Pro (the newest) does not boot up. I have 2 Monitors connected to the Mac Pro. The first via HDMI, the 2.nd via Thunderbold. Also there a 2 HD Devices connected via USB. So when the Mac Starts up on the left (the main screen) a spinning wheel behind a grey Screen appears. The 2.nd Screen show graphical errors. And nothing happen. Onlny when i turn power off an i try it a 2nd. time the Pro starts up correctly. This appears nearly every day since two weeks. I have to start the Pro always two times before i can work with it. I have run the hard disk utility an i have repaired the permissions. the were no errors. I think the build in SSD may have a problem. So is there anyone outside who knows the problems i described ?

Product recall?
I doubt it. Considering demand for this product was so high it was on allocation for six months, the number of reported problems falls far short of a recall-level problem.
It just sounds like this unit and a few others need service.
Regardless, do not wait for Apple to take action. Focus on getting YOUR specific problem solved. Contact Apple as soon as possible.

2009 Mac Pro starting to not boot or display degrades after time. Any common reasons others have experienced?

Currently on Lion, and is up to date on Lion.
Some notes refer to internal battery. BTW, BR2032 battery hard to find.

Should do better and safer than canned air and very popular with computers and other areas.
Metro Vacuum ED500 DataVac 500-Watt 0.75-HP Electric Duster 120-Volt
www.amazon.com/Metro-Vacuum-ED500-500-Watt-Electric/dp/B001J4ZOAW/

Boot Camp, Vista Ultimate x64 SP1, 2009 Mac Pro Quad 2.93, ATI 4870 HD

Hello All,
I’ve run into a problem installing Boot Camp with Vista Ultimate x64 SP1 on my early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD (the one with one DVI and one mini-display). I followed the instructions from the Boot Camp Installation and Setup Guide, and everything was going great until I hit page 12 of the Guide (Step 3). The Boot Camp drivers installed without error, and prompted me to reboot. Upon rebooting onto the newly installed Vista x64 partition, the screen went black after the chkdsk screen appeared. I can boot into Vista safe mode, but booting into Vista normally results in the black screen. On a hunch, while in safe mode, I uninstalled the ATI video drivers installed by Boot Camp. I was then able to boot Vista normally, but only with the standard VGA adapter. Then I tried installing the latest 9.4 ATI drivers from the chipset vendor, AMD, http://game.amd.com/us-en/drivers_catalyst.aspx. Booting normally after the ATI chipset drivers were installed left me with a mostly black screen, and a few swizzles of horizontal color, but not enough to make out any sort of image. Once again, I was able to boot normally by first booting into safe mode and then uninstalling the ATI driver, leaving me with the standard VGA driver.
The displays I have tried so far are 1) Apple Cinema HD 23”, and 2) Apple Cinema 20”. Also, I have tried all 6 permutations with the ports on the Apple version of the ATI Radeon 4870 HD with both displays (using the mini-display to DVI adapter), 2 permutations with both displays, and 4 permutations with single displays. All permutations result in the same black screen after installing Boot Camp drivers.
Am I missing something? It seems to me that there is a display driver that needs to come from Apple that will work with the Apple version of the ATI Radeon 4870 HD in Vista Ultimate x64 SP1 attached to an Apple display. I’ve installed Vista Ultimate x64 SP1 and many other operating systems in the past 27 years of working with computers, and typically with video cards I’ve had to get the drivers from the vendor that shipped the card, not the chipset vendor. Sure, occasionally the opposite is true, and I don’t mind spending a few days to figure out what works best for me as long as I believe I am making progress.
Has anyone else run into this problem with his or her early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD? I’m posting this in the Boot Camp forum as I think this problem is rooted in the Boot Camp drivers, specifically for the Apple ATI Radeon 4870 HD. Please let me know if I should post elsewhere.

You are the second person I think I've seen with trouble using Mac Pro and ATI drivers (other was on Mac Pro forum).
When updating graphics, there are extra steps that insure you get the best working drivers.
I've always found Apple to be behind the curve on Windows support. Drivers that come with a card from the vendor ususally means ATI or Nvidia, and even then, you go to the web and download and install the latest tested / beta / qualified drivers. Some people try a variety of driver versions to find the one that works best.
Apple has not been updating Boot Camp drivers for Late 2008 and on Macs. Boot Camp 2.1 is now over a year old. What is on your OEM Leopard DVD is the only drivers I would use - if at all! try without is what some do, and then see if you can selectively install. Under Windows 7, I don't need or install, and now with the RC/7077 version of 7, Microsoft 'blocks' installing Apple Boot Camp drivers as known to cause problems.
If it ain't broke, don't fix it. Unistall the various Apple services, drivers, startup items that you can live without or until you narrow it down. iTunes 8.1+ in Windows can break and prevent ability to even use optical drives and devices for instance.
Some tips for upgrading drivers, one from eVGA forum but should translate.
http://www.evga.com/forums/tm.asp?m=396474
http://game.amd.com/us-en/drivers_catalyst.aspx
http://downloads.guru3d.com/download.php?det=1655

HT3964 I have a MacBook Pro that will not boot up. The apple symbol Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT3964 2009 macbook pro superdrive will not load discs

2009 Macbook pro superdrive will not accept discs. The loading mechanism appears not to be responding. The mechanism may be jammed as it will not allow the disc to be fully inserted. Last time I played a disc I had trouble ejecting it. I managed to get disc out can't remember how. Think the disc must have partially ejected and I managed to pull it out. Can anyone help?

Hi kayj128,
Thanks for using Apple Support Communities. This article has steps for troubleshooting the SuperDrive built in to your Macbook Pro:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Cheers,
- Ari

I have a mac pro wich will not open windows in boot camp i get to the two options select windows but iyt will not load can you help please

i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please

Hi there, Well, i thing i might have had the same problem (if you dont mean the selecting part, then try keyboad with usb and without if u dont have a macbook pro or so), i did the same and after selecting windows it said "No bootable disk" or " no boot disk" or something like that and the installer wont start when i was trying to install via CD/DVD.
The sulution is to use 2 usb-drives, one for the support drivers from apple and one for the windows it self after burning the CD/DVD to the usb on a PC using the windows own tools and creating a ISO file.
(there might be problems whit CD/DVD install sometimes)
The ISO file on a own USB is the most importat thing!! (and even apple and windows didnt know that but me and a technikal support guy from the store i bought it managed to fix it after like 4 days )
Hope it work now mate!

Macbook Pro Frozen, will not boot up

Hi,
My MBP is continually freezing and it seems to only happen while Safari is running. I reset Safari, cleared history and it worked better for a short time. My notebook is now frozen and will not boot past the gray start up page. After the Apple icon appears the desktop goes to all gray and I cannot do anything. I am nervous to continue the hard reboots (manually holding the power button.) I cannot have any hard drive errors. This is a mid 2011 model Macbook Pro. Any advice?
Thanks!

Reset SMC like this:
Intel-based Macs: Resetting the System Management Controller (SMC)
Barry

Satellite Pro 4340DVD will not boot up - pci.sys missing or corrupt

I bought a Toshiba Laptop Satellite Pro 4340DVD Model # PS434C-3N152, Serial # Y0018185J, off E-Bay.
The original operating system, Win 98SE has been upgraded to Win XP Pro. No disks came with the laptop.
The laptop crashed yesterday while I was online and will not boot-up.
_Error message reads:_
+The following file is missing or corrupt: System32\DRIVERS\pci.sys.+
Any suggestions on how to rectify this problem will be deeply appreciated. I would very much like to have a users manual for this unit but haven't been able to find one.
Thanks!
Sam

Turns out that the dirty dawg was Anti-Virus 2009 that caused the problem. Managed to get laptop to boot up in "safe mode," found the dirty dawg, deleted it, and the laptop booted right back up.
This issue is resolved!
Sam

Satellite Pro M10 will not boot again and comes up with the error message

My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
What can I do to get the notbook restart again?

Hi everyone
If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
Attention: don't run these commands if you have more than one operating systems running in your laptop.
Boot from Windows Xp installation cd
Choose repair installation from console by pressing "C" key.
A console will open asking you for administrator password, insert the password and press enter.
Run de command: FIXMBR (It will write a new boot record)
Run de command: FIXBOOT (It will write a new boot file)
Restart the laptop and now windows should start without problems.
Regards

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Satellite Pro A120 will not boot up

Sorry for bad English!
My computer will not boot.
I want to install a BIOS but connecting it to another computer but I dont know how?

In my opinion its not a faulty BIOS but I think the virus on your notebook caused this issue.
The error message says everything:
+Malicious program will access to the read memory+
+problems on bios+
If you are not able to boot up the notebook, neither from the Recovery CD, bootable CD (XP, Linux) nor from HDD then its a serious issue and you should definitely contact the ASP in your country.
If you are a lucky man then the ASP technician would be able to flash the BIOS ROM using a special procedure and the notebook should function again.
Bye

Final Cut Pro X will not boot hangs

Hi I have a problem fcp x will not boot freezes and fails opening,

remains not work welland nothing happens help

Power Mac G4 MDD Will not Boot

I have a dual 1.25. I had the screen come up and tell me you have to restart.
restarted computer and now it will not boot. I get a black screen, cannot boot from CD, CD lights up then turns off. All fans turn on, the start up chime, chimes. Mouse does not seem to work, no lights and neither does keyboard. reset pmu by pressing button on mother board. removed PRAM battery and replace after 30 seconds. There is a red led lit on mother board, close to the RAM. I have replaced video card, not fixed. I have reseated every board I can, including ram. I am at a total loss. i hold down option, nothing happens. Help..
I have a WD 1.5 TB with full operating system on it, plugged in via fire wire, and i cannot boot from that. I was downloading from an FTP when the force reboot happened.

Will try that next, have appointment at genius bar, just thought i would bounce it off some people here. I did disconnect all peripherals, and unplugged battery for 5 minutes. I did not replace PRAM battery, but would the mouse and keyboard not work because of PRAM>? Anyways, still trying. Thanks for the input, much appreciated.

2009 Mac Pro Quad Will Not Boot

Similar Messages

Maybe you are looking for