200MHz FSB when I want 800MHz

This is probably a rather simple/stupid question but I have an 800MHz FSB P4 and 2 banks of DDR400 and therefore thought I would get a FSB of 800MHz.  However, when I check CoreCentre it records an FSB speed of 203MHz, multiplier of 13 giving the CPU speed of 2637MHz.  What am I doing wrong, if anything?

Quote
this should be a sticky in every single hardware forum
It's in the  P4 Neo Unofficial Guide stuck at the top of this forum.

Similar Messages

  • MSI KT6 Delta-FISR (MS-6590 v2.0) & XP3200+ Can't get 200MHz FSB

    Hi,
    Having searched for this common problem I have purchased a new PSU (Antec True Power 2 550w) so I don't think it is this. The memory is meant to be compatible according to the crucial site too.
    Basically I changed from an ASRock mobo (no 4 pin CPU power connector) to the KT6 to get onboard firewire. The same CPU had been working in the ASRock mobo at 200Mhz FSB with a SilentMaxx PSU (fanless +3.3v /28A, +5v/35A, +12v/16A). As I had moved the computer from the lounge to study I changed the PSU when I installed the KT6 to an Antec True 380SP (+3.3v /28A, +5v/35A, +12v/24A) to get a reduction in temperature.
    The system booted with a FSB of 100Mhz. So I changed in the BIOS FSB to 200Mhz and the system wouldn't get to the XP login page. I then tried steps up from 100Mhz and got to 120Mhz. After searching here I saw the PSU issue and so changed to the SilentMaxx. This would get past the login page at 200Mhz but would crash within 2 minutes.
    I then changed to an Advance PSIV-500-2 (+3.3v /30A, +5v/32A, +12v/16A). This would login at 200MHz and was stable until you did anything CPU intensive - 2 mins of divx encoding caused the crash.
    So now for the Antec True Power 2, it gets past the login screen but won't load the desktop. Starting at 100Mhz I can get to 125MHz, so I'm now worse than with the original Advance PSU.
    So, with the changes being seen whenever the PSU is changed the indications are that it is the PSU, but now with the new Antec True Power 2 550w I can't believe it is still that.
    Any ideas?

    Hi again.
    Well I've finally got around to doing the XP repair. The good news is that the system boots and stays up under normal usage at 200MHz. The bad news is that under stress (encoding video) it reboots with the following error:
    Error code 0000000a, parameter1 ffe00124, parameter2 00000002, parameter3 00000001, parameter4 804db848.
    I have searched the internet and can't find any mention of '804db848' or 'ffe00124'. So am now thinking the board may be bad?
    I have set my memory to CL3, with timings of 3-3-8 and voltage of 2.6v (as per manufacturer recommendations) and this memory did not cause problems on my ASRock board.
    Two things I have noticed:
    1. The case temp is very high, under idle CPU = 48C and case = 41C, under stress CPU = 58C and case = 51C. I have two 120mm case fans and the PSU has a 120mm fan too. My hard disks are 28C and 29C. When I had the ASRock board in the same case with the same fans etc it never went above 36C (which I thought was still quite high).
    2. After searching this board I found a post that stated they had success at 192MHz FSB but unstable on 200MHz (K7N board). I will now try this and kick off the video encoding again and report back.

  • 200mhz fsb support

    Hiya, just a quick question.
    Will the K7N2-L support the 200mhz FSB athlons when they get released later on this year?
    I hope that it will, as i currently have the above mentioned board with an 1700+ cpu running at 11*166fsb.

    Only the new (as yet unreleased i think) delta k7n2's official support it.  However as so many people are easily reaching 200 fsb you should be able to overclock the motherboard to the chips stock speeds.  Only problem with this is if msi do not realease a bios with fsbs greater than 200 youll only be able to overclock the new athlons by the multiplier alone.

  • O/Cing 2800 to 200Mhz FSB K7N2-L

    I recently purchesed a MSI K7N2-L Delta motherboard, AMD Athlon 2800+ 333Mhz FSB Barton, 512MB Corsair Value Select PC3200 Ram, ATI Radeon 9700 Pro 128MB, Iceberg Chipset kit, and a CoolerMaster Aero 7 Lite CPU Cooler. I was able to overclock the machine to the following without any problems:
    When I try to set the FSB to a value like 195Mhz the computer will load normally, start to load Window's XP Home SP1 and restart. Other values such as 200Mhz would simply refuse to boot and hang with no video or keyboard LED's lighting up. So far I'm only able to run this setting sucessfully.
    Are there any settings that I need to find or change to allow me to overclock to 200MHz FSB? Any other suggestions or help would be very very much appreciated!  
    My Complete Specs:
    AMD Athlon 2800+ Barton (333MHz)
    MSI K7N2-L Delta
    512 MB PC3200 Corsair Value Select RAM
    ATI Radeon 9700 Pro
    120 GB Maxtor 7200RPM w/ 8MB Cache
    60 GB Maxtor 5400RPM
    Sound Blaster Live! 5.1 OEM
    350 Watt Antec PSU (SL350 Model)
    Lite-On CD-RW
    Floppy Drive
    Coolermaster Aero 7 Lite (Installed on the Athlon 2800+)
    Iceberg Chipset Kit (Fan installed on NB and sink on SB)
    Windows XP Home SP1
    Thank you very much for your time  
    -ErMeR

    Hi,
    As for the begining lower the multiplayer and than set the fsb speed. Few days ago Kingfisher wrote a guide about o/c. It includes basics but You shall read it https://forum-en.msi.com/index.php?threadid=40413&sid= and for more I suggest You use googl and read some articles. GreetZ

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

    Error on load: System.IO.IOException: The process cannot access the file
    '\\server1\SCANSHARED\.pdf' because it is being used by another process.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
       at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
    I faced this  error in event viewer  when users want to view documents from this third party deployed scan solution
    here I have two WFS servers  and they configured with load balancing in F5 .
    when I enable both servers in F5 I receive this error messages in 2nd server,
    when users want to view documents
    adil

    Do you have antiVirus installed on the sharepoint servers?
    These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
    are uploaded.
    Please follow this KB and exclude the folders from Scanning.
    http://support.microsoft.com/kb/952167
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • My deleted contacts still show up when I want to send a text message

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an I get rid of that

    This is a big problem!!!!!! Deleting is deleting!
    I'm surprised more people aren't annoyed by this bizarre Apple tech problem.
    I love my Apple iPhone, but...
    This problem is enough for me not to buy another iPhone :(
    This should be simple to solve, Apple...right???????????????????
    Dear Apple, PLEASE FIX this BUG in NEXT UPDATE asap !!!!!!!!!!!!!!!!
    Most appreciated.

  • HT4623 My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. 

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an I get rid of that

    Try this...
    have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
    That resolution came from another thread on this issue, and this did solve to poster's issue.

  • My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that

    Try this...
    have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
    That resolution came from another thread on this issue, and this did solve to poster's issue.

  • When I want to organise my bookmarks most of the options are greyed out and cannot be used including create new folder! Help

    '''''''''bold text'''''''''
    When i want to organise my bookmarks most of the options on the organise bookmarks menu are greyed out and cannot be used - including create new folder etc. Help please.

    Make sure you are not in the Private Browsing Mode:
    File > Private Browsing is UNCHECKED.

  • Apple id was originally disabled. I reset my password and can sign into my apple id account. But when i want to buy an app in the app store it says my apple id is disabled again.

    apple id was originally disabled. I reset my password and can sign into my apple id account. But when i want to buy an app in the app store it says my apple id is disabled again.

    It's real easy to create a new one and, in fact, it's too easy.  I say that because multiple IDs are a PIA.  The problem is that anything obtained from the iTunes Store is PERMANENTLY associated with the ID that was used to obtain the item(s).  iTunes items can not be transferred from one ID to another and IDs can not be merged.
    The problem arises when you want to update an app.  If you're doing it from iTunes on your computer, you must log out and back in to get to the correct ID.  Then you update and log out/in again to get back to where you started.  It's slightly easier if you update from the iPad/iPod device as there is no need to log out/in BUT you still need the correct password for the appropriate ID.  Of course, with a disabled ID, the problem is much worse!
    A replacement Apple ID makes sense ONLY if you wish to start out absolutely brand new with zero iTunes Store purchases.
    If you're really butting your head aginst a wall and you're reasonably close to an Apple Store, my suggestion is that you make an appointment with the resident "Genius" and get his/her help.
    One last thought...  If your brother actually got a human on the phone to dispute the charges, go there and explain the problem.  Of course, if Apple did not accept his explanation of what occurred, that could be the whole issue.  Apple believes that money is owed on the account!

  • When I want to edit a photo in photoshop, iphoto duplicates the image and I end up with two or three copies of the same photo and they are also duplicated on my computer.  This has only occurred since I installed iPhoto 11.

    Ever since I installed iPhoto '11 on my computer, I have had a problem with images being duplicated when I want to open an image to edit in Photoshop.  I did not realize at first that the images were also duplicated on my computer.  This has taken up an incredible amount of space on my computer.  Why does this happen?  Is there a problem with the software?  Can I remove iPhoto and re-install?  Would that help?

    saUnless you have a copy of your iPhoto 09 library you will have to start over from scratch with a new library and import the Masters file from inside iPhoto 11's library as described here:
    Start over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1.  Move the existing library folder to the desktop.
    2. Open the library package like this.
    Click to view full size
    3. Launch iPhoto and, when asked, select the option to create a new library.
    4. Drag the Origianls (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
    Click to view full size
    This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.

  • Why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?

    why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?

    If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
    To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534

  • Why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it?  I haven't synched it with any other mac but my own.

    why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it?  I haven't synched it with any other mac but my own.

    Hi Lisa,
    I know from experience that this must be a frustrating situation for you especially if you don't want to loose the music/video content that is currently on your ipod. Unfortunately though you may have to consider re-syncing it as it thinks its currently synced with another computer.
    If you bought any music that is on the ipod through itunes you can opt to right click the ipod in itunes and 'transfer purchases' if you authorise your library in the 'Store' menu in itunes. Some reasons for this happening may include some of the following:
    Deleting and reinstalling your itunes on the computer.
    Removing the account you had on the computer you used itunes in and making a new one. (User account, eg: Lisa).
    Changing computers in the past.
    A friend or family member syncing it on their computer to give you there music.
    A sign of a failing iPod.
    Alternatively you can opt to not sync it and keep the music that is on your ipod there but this means you will never be able to update your ipod.
    Hope this helps!

  • When I want to add an album onto my iphone using itunes, I am successful in  putting one album on my phone but when I want to add another album it deletes the first album I put on my phone. How can I add more albums without some albums disappearing?

    I am having a problem with importing cds onto my iPhone. I have successfully added a playlist or album to my phone but when I want to add another album/artist, the first album that was on there has all of a sudden disappeared. Its like I can only have one album on my phone. This is my first time dealing with anything Apple because I have been using android phones. Any help would be appreciated as I don't fully understand iTunes.

    You can delete photos from individual albums but not from the camera roll.  If you try to delete a photo from camera roll it will be deleted from all other albums ("locations") that contain the photo.  This is because the actual photo is in the camera roll (the albums only contain links to the photo in camera roll, not the actual photo).

Maybe you are looking for