2010 i5 MBP USB Ports Not The Same?  Griffin iMic Issue

I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.

Hi WebBrowser2,
As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working).  There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
And I am hoping- it will assist you in the same way as it assists me.

Similar Messages

  • MBA will not allow me to use both usb ports at the same time.

    My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.

    What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.

  • MacBook Pro 13" 2011 - Won't let me use 2 USB ports at the same **** time.

    I'm trying to use 2 usb driven hardware devices at the same time and it won't let me - one of them always disconnects (usually the 2nd port) ...even though both devices work on other macbooks ive used lately..
    Is it possible one of them isnt properly powered? Is there any way of "turning" them both on?
    Sorry I sound so novice, i've had macs for 10+ years but i've never had this problem before...

    USB ports on a computer have always had a limited amount of power. The least expensive solution is to get a powered USB hub, meaning it has a separate power supply. The hub will provide enough power to keep things running.
    It will also make your extenal hard drives behave better it they are USB-powered.
    Here's an example:
    Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC

  • Table at bottom of page (not the same as similiar issues)

    I already know about headers/footers, counting rows, etc. However none of those solutions seem to work for the following issue.
    For our PO, each page has a footer message on it. In addition, after the end of all of the PO lines, they want the total to appear at the bottom of the page. The next page then contains terms and conditions.
    For example with a 4 page PO:
    Page 1 has PO header info, PO lines and there is a standard message in the footer.
    Page 2 has the remainder of the PO lines. There is also a table that has the total (and some other detail) that must appear at the bottom of this page. There is also the standard footer message that appears at the bottom of every page.
    Page 3 and 4 have terms and conditions, as well as the standard footer message.
    The issue we are facing is getting the total table on Page 2 to the bottom of the page, instead of immediately following the PO lines. If anyone has any thoughts, please advise. I can try and provide a screenshot if this is not clear enough.
    Thanks,
    Brett

    Thanks, the last page solution works fine. Take care.
    I just started using this forum and just understood that I had to tag the answer as correct but mis-tagged it helpful, the answer is fact correct. Sorry.
    Edited by: 868628 on 13-Jul-2011 05:19

  • Iq518a usb ports not working

    Whenever i plug anything into the usb ports i get a message popping up saying that it cant recognise the the port
    Message Edited by Knobby_103 on 12-29-2008 01:32 AM

    Knobby,
    By chance, do you use the memory card reader and when done click the "Safely Remove Hardware" icon in the systray by the clock?
    If so, it's possible you are disabling the USB ports at the same time because I believe that the card reader also utilizes a USB port on the motherboard. If this is what's happening, you can keep this from happening by either going into "Computer", right-clicking the card reader drive, and selecting Eject. This will make it so you can remove the memory card safely without removing the entire hardware device.
    "A riot is the language of the unheard." - Dr. Martin Luther King Jr.

  • My Macbook Pro Retina's USB port on the right side not working at all

    Dear all,
    I received my macbook pro 15inch with retina display a week ago, but not until today had I got the chance to use the USB port on the right side, only to find out that it is not connecting to anything at all. I have tried to use my iPhone 4 and iPad 3 with two different cables, my USB thumb drive, and my Blackberry 9900, none of them are charging nor shown in iTunes/Finder. All of above works on the left and on other windows machines too.
    I'm also not able to charge my Blackberry with the usb port on the left side, thought it would pop up a message saying "charging not supported" on the phone.
    For you information, I have applied both updates including the one released few days ago. I have also tried to reset the PRAM. Also, I have migrated from my old late 2008 13inch unibody Macbook using Migration Assistant, not sure if this would affect anything.
    I'm aware that there have been reports and discussions regarding the USB port not been able to run devices on 3.0 speed, but I wonder if anyone else have the same problem with me, where the port simply not connecting to anything at all?

    I also have a problem with the USB port on the right side of my Retina MBP.  The USB3.0 port on the left side works fine, even with high speed external SSD enclosures, like the OWC Mercury Extreme Pro 6G which enables me to copy large files at a sustained rate of 160-170MB/sec.  Wow USB3.0 and the Mercury SSD is a FAAAAST combination connected to the Retina MBP.
    However, like the forum entries about the USB3.0 ports in general on the new Retina MBP, the USB3.0 port on the RIGHT side is plagued with dropping intermittently, disconnecting my external hard drives while copying large files AS WELL AS disconnecting while just sitting there connected to an external hard drive and doing nothing.
    Therefore, since I don't feel like returning my Retina MBP and waiting weeks for a replacement, I have chosen to only use the left side USB3.0 port for now.
    I have my suspicions about why the right side USB port might be more problematic than the left side one.  I found this older post on the internet about how "Not all USB ports are created equal on MacBooks..." that talks about how on older models of MacBooks one of the USB ports shares a USB hub with multiple other devices like the iSight camera etc. therefore making it less tolerant of heavy traffic or something like that.  (http://www.wired.com/gadgetlab/2008/05/the-macbook-all/)
    Therefore, I wonder if the right side USB port is sharing a USB internal hub where-as the left side one is more 'dedicated' and therefore in my case able to handle the high speed transfers/traffic I am throwing at it with my external SSDs.
    I have also read that USB3.0 in general, on non-Macs, has had trouble for years.  For instance, some forum entries on Apple Support Communities and other non-Apple forums has made mention that 'they' are not surprised at the problems encountered on USB3.0 external hard drives connected to the Retina MBP because Windows laptops have had a lot of flakey problems with USB3.0 for 'years'. 
    Also, I have recently purchased a "Buffalo" external Thunderbolt 1TB drive from OWC and have been doing Clones onto that drive for several weeks.  I use SuperDuper to clone >600GB of data on my 768GB Retina MBP several times a week.  And, I have (knock on wood) not had any problems with the stability of my externally connected Thunderbolt drive.
    So, in my case, I am racking it up to high-speed stresses on the USB3.0 ports at least in part...and perhaps the possibility that the LEFT side USB port on the Retina MBP is more dependable and/or a more dedicated USB port than the right side one.
    This doesn't really solve your problem, but it may at least help you feel like you are not alone.

  • My flashdrive only works on one of the usb port.  the other usb works with my iphone charger, but not my usb. any suggestions? should i take it in? its a brand new laptop.

    My flashdrive only works on one of the usb port.  it will not work on the other usb port. however, the other usb works with my iphone charger.
    any suggestions? should i take it in? its a brand new laptop.

    Reset the SMC and PRAM
    SMC Reset:
    Shut down the MacBook Pro.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    PRAM:
    Shut down the MacBook Pro.
    Locate the following keys on the keyboard: Command, Option, P, and R.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • After a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. How do I fix this issue?

    I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?

    System.log says USB related message?
    Resetting SMC as well as NVRAM could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • USB Port not recognising (MBP Late 2011)

    USB Port not recognising iPhone or External Hard Drives. But working with Flash Drives!! (Both not working) (MBP Late 2011)
    MBP Late 2011
    OSX 10.8.3
    2.2GHz Intel Core i7
    8GB 1333MHz DDR3

    Yes, Box is checked. I've used many hard drives on my laptop both through firewire and USB I own about 4 hard drives through all different sizes and none of them work (started to happen about a week ago)
    iPhone:
    No nothing happens when my iPhone is plugged in. No charging, not syncing, iTunes doesn't recongise anything is there and my dropbox account which downloads the photos doesn't see its there, iPhoto and Aperture don't see my phone.
    However My Girlfriend has a Macbook (white 2009) I plug everything into her laptop and everything works, chargers and reads. so its not the perferials or cables.
    I know how to use Macs and PC very well and I have tried resetting and turning it back on whilst holding
    Command>Option>P+R
    and un plugged the charger shut it down, plug it back in and turn it on again. but nothing works...

  • I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    Thank you for your reply.  I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years.  The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import.  Now all of a sudden my iMac does not recognise the camera.  However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing.  So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years.  I can only assume that the settings on the iMac may have changed, but I cannot verify this.

  • OHS not able to redirect to two different ports of the same managed server

    Hi
    I need to redirect to different ports of the same managed server (say M1, M2) based on the availability of the managed server. ie when managed server M1 is busy handling other requests i need to redirect my new request to M2. i already have this mechanism to find out which managed server is free.
    so now the problem is if M2 is free how would i tell ohs to redirect it to M2 server??
    M1,M2 both managed servers are hosted at host1.example.com.
    M1 port - 8001
    M2 port - 8003
    my context root is /YpsSupplyPlanningEngineService/supplyPlanningEngineService
    my mod_wl_ohs.conf is defined as:
    <Location /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
    SetHandler weblogic-handler
    PathTrim /M1
    WebLogicHost host1.example.com
    WebLogicPort 8001
    </Location>
    <Location /M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService>
    SetHandler weblogic-handler
    PathTrim /M2
    WebLogicHost host1.example.com
    WebLogicPort 8003
    </Location>
    when i type the url in browser as "http://<ohs_server_url>:7777/M2/YpsSupplyPlanningEngineService/supplyPlanningEngineService"
    This is not working. Is there any way to do it?
    Please help me here.
    Thanks in advance.
    Edited by: 925137 on Jul 5, 2012 2:03 AM

    Hi Anon
    thanks for replying..
    Chnage from /M1 to M1 didnt work.
    then I set debug ALL and set WLLogFile to full path
    the log i received when i queried for request is:
    2012-07-05T17:04:18.5774+05:30 ================New Request: [GET /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL HTTP/1.1] =================
    2012-07-05T17:04:18.5774+05:30 Using Uri /M1/YpsSupplyPlanningEngineService/supplyPlanningEngineService
    2012-07-05T17:04:18.5774+05:30 After trimming path: '/YpsSupplyPlanningEngineService/supplyPlanningEngineService'
    *2012-07-05T17:04:18.5774+05:30 The final request string is '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'*
    2012-07-05T17:04:18.5774+05:30 SEARCHING id=[host1.example.com:8001] from current ID=[host1.example.com.com:8001]
    2012-07-05T17:04:18.5775+05:30 The two ids matched
    2012-07-05T17:04:18.5775+05:30 @@@FOUND...id=[host1.example.com.com:8001], server_name=[host1.example.com.com], server_port=[7777]
    2012-07-05T17:04:18.5775+05:30 attempt #0 out of a max of 5
    2012-07-05T17:04:18.5775+05:30 keepAlive = 1, canRecycle = 1
    2012-07-05T17:04:18.5775+05:30 Trying a pooled connection for 'xxx.xxx.xxx.xxx/8001/8001'
    2012-07-05T17:04:18.5775+05:30 getPooledConn: found a host and port/securePort match
    2012-07-05T17:04:18.5775+05:30 getPooledConn: No more connections in the pool for Host[xxx.xxx.xxx.xxx] Port[8001] SecurePort[8001]
    2012-07-05T17:04:18.5775+05:30 general list: trying connect to 'xxx.xxx.xxx.xxx'/8001/8001 at line 2372 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL'
    2012-07-05T17:04:18.5776+05:30 URL::Connect: Connected successfully
    2012-07-05T17:04:18.5776+05:30 SSL is not configured for this connection
    2012-07-05T17:04:18.5776+05:30 Local Port of the socket is 7812
    2012-07-05T17:04:18.5776+05:30 Remote Host xxx.xxx.xxx.xxx Remote Port 7812
    2012-07-05T17:04:18.5776+05:30 general list: created a new connection to 'xxx.xxx.xxx.xxx'/8001 for '/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL', Local port:7812
    2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::sendRequest
    2012-07-05T17:04:18.5776+05:30 Entering method BaseProxy::parse_headers
    2012-07-05T17:04:18.5776+05:30 No of headers =5
    2012-07-05T17:04:18.5776+05:30 Header from client:[User-Agent]=[Java/1.6.0_11]
    2012-07-05T17:04:18.5776+05:30 Header from client:[Host]=[host1.example.com:7777]
    2012-07-05T17:04:18.5776+05:30 Header from client:[Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
    2012-07-05T17:04:18.5776+05:30 Header from client:[Connection]=[keep-alive]
    2012-07-05T17:04:18.5776+05:30 Header from client:[ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
    2012-07-05T17:04:18.5776+05:30 Exiting method BaseProxy::parse_headers
    2012-07-05T17:04:18.5776+05:30 parse_client_headers is done
    2012-07-05T17:04:18.5776+05:30 Method is GET
    2012-07-05T17:04:18.5777+05:30 URL::sendHeaders(): meth='GET' file='/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL' protocol='HTTP/1.1'
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [User-Agent]=[Java/1.6.0_11]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [Host]=[host1.example.com:7777]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [Accept]=[text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [ECID-Context]=[1.004l1E7Cv6mESOGLMy^Aye0007Kd00000E;kXjE1ZDLIPHUjDHCj9KSnJLTkGSRtGKRXUQRdURP5URPdUPPJLQSqPRO_VBSpGSSgPSKgHQRiPQRbLIRbPQR_JLPmMTQZLO]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [Connection]=[Keep-Alive]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-SSL]=[false]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-Forwarded-For]=[xxx.xxx.xxx.xxx]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-PATH-TRIM]=[M1]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [WL-Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [Proxy-Client-IP]=[xxx.xxx.xxx.xxx]
    2012-07-05T17:04:18.5777+05:30 Header to WLS: [X-WebLogic-KeepAliveSecs]=[30]
    2012-07-05T17:04:18.5779+05:30 About to call parseHeaders
    2012-07-05T17:04:18.5779+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6366+05:30 Reader::fill(): sysRecv returned 1271
    2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
    2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLine set to [200 OK]
    2012-07-05T17:04:18.6366+05:30 URL::parseHeaders: StatusLineWithoutStatusCode set to [OK]
    2012-07-05T17:04:18.6366+05:30 Header from WLS:[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
    2012-07-05T17:04:18.6367+05:30 Header from WLS:[Transfer-Encoding]=[chunked]
    2012-07-05T17:04:18.6367+05:30 Header from WLS:[Content-Type]=[text/xml]
    2012-07-05T17:04:18.6367+05:30 Header from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    2012-07-05T17:04:18.6367+05:30 parsed all headers OK
    2012-07-05T17:04:18.6367+05:30 Exiting method BaseProxy::sendRequest
    2012-07-05T17:04:18.6367+05:30 sendResponse() : r->status = '200'
    2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[Date]=[Thu, 05 Jul 2012 11:34:18 GMT]
    2012-07-05T17:04:18.6367+05:30 Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
    2012-07-05T17:04:18.6367+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6373+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6374+05:30 Reader::fill(): sysRecv returned 4048
    2012-07-05T17:04:18.6374+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): sysRecv returned 4048
    2012-07-05T17:04:18.6377+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6381+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6381+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 1340
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 385
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6382+05:30 Reader::fill(): sysRecv returned 331
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 305
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 255
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 225
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 307
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6383+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 393
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 311
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 255
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 223
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6384+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 309
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 393
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 319
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6385+05:30 Reader::fill(): sysRecv returned 255
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 327
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 377
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 305
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6386+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 309
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 379
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 311
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6387+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 315
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 381
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 179
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 152
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 327
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6388+05:30 Reader::fill(): sysRecv returned 317
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 237
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 311
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 251
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): sysRecv returned 319
    2012-07-05T17:04:18.6389+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 233
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 325
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 261
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 315
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 239
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6390+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 325
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 235
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 323
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 243
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6391+05:30 Reader::fill(): sysRecv returned 321
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 239
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 329
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 103
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 415
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6392+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 286
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 231
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 267
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 333
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 253
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): sysRecv returned 335
    2012-07-05T17:04:18.6393+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 251
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 343
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 259
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 325
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 341
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6394+05:30 Reader::fill(): sysRecv returned 353
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 255
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 331
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 265
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 327
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 263
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6395+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 335
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 261
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 337
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 255
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 345
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): sysRecv returned 279
    2012-07-05T17:04:18.6396+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 76
    2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 386
    2012-07-05T17:04:18.6397+05:30 Reader::fill(): first=0 last=0 toRead=4096
    2012-07-05T17:04:18.6397+05:30 Reader::fill(): sysRecv returned 77
    2012-07-05T17:04:18.6397+05:30 calling closeConn() with non-null URL* at 633
    2012-07-05T17:04:18.6398+05:30 canRecycle: conn=1 status=200 isKA=1 clen=-1 isCTE=1
    2012-07-05T17:04:18.6398+05:30 closeConn: pooling for 'xxx.xxx.xxx.xxx/8001'
    2012-07-05T17:04:18.6398+05:30 closeConn: pooling '0'
    2012-07-05T17:04:18.6398+05:30 request [YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL] processed successfully..................
    2012-07-05T17:04:18.7859+05:30 BEFORE acquire_lock
    2012-07-05T17:04:18.7860+05:30 AFTER acquire_lock
    2012-07-05T17:04:18.7860+05:30 List size is 1
    2012-07-05T17:04:18.7860+05:30 Cleaning up the list node 'host1.example.com.com:8001'list Length '1'
    2012-07-05T17:04:18.7860+05:30 stale connections: KA = 20, delta = 0
    The final request string generated is correct.. but still this fails in my java code (where i send request).
    it gives me an error saying:
    Error: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
    javax.xml.ws.WebServiceException: java.io.FileNotFoundException: http://host1.example.com.com:7777/YpsSupplyPlanningEngineService/supplyPlanningEngineService?WSDL=/META-INF/wsdl/ServiceException.wsdl
    Edited by: 925137 on Jul 5, 2012 4:42 AM

  • I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    Well
    I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem.  Just inverting it on paper did not do the reick, it needed some help with the alcohol.  Of course the probelm is the debris that gets inside and it really needs to come out.
    This is a huge problem for RIM devices users too.

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed"   and of course there is no device that shows up either.  It would be great to download my photos!  I'm using Windows

    Go through this support doc:
    OS: Device not recognised in iTunes
    Windows: http://support.apple.com/kb/TS1538

Maybe you are looking for

  • How to make a field required in OAFramework

    How to make a field required in OAFramework at runtime?? Please explain in detail if possible. Thanks Kumar

  • I cant update my iphone 3g because there's an error 0xE00000A. How can I get my iphone updated?

    When I went on itunes and I plugged my iphone in a box came up and there was an error 0xE00000A. I need to update my phone because all of my apps are crashing, the screen goes dark, my phone is really slow, and I have to push the home button at least

  • How can I audio scrub in Photoshop CC?

    So I am making a lip sync animation and I need to be able to hear the audio as I scrub it. But so far I can only hear the audio when I play the clip. Is there a way to switch it to stream the audio as I scrub it?

  • Print AR Invoice + Packaging slip

    Hi, My customer adds AR invoice + payment means (skips sales order because it is immediate payment + shipping). Items are NOT managed by serials or batches. How can I get the system to print the AR Invoice + Packaging slip when AR invoice is added? T

  • 3.2 Server Stuck Offline & Wake on LAN issues

    Got through installation and getting started guide running 1 VM Server and a separate VM Manager   I was able to shutdown the Server from the Manager GUI; however, when trying to restart the Server from the Manager I received an error: OVMAPI_4005E N