2010 Mac mini CPU options

Does the new Mac mini have a user upgradeable CPU?

The processor of the new mini is most definitely soldered in. Thus, it is not upgradeable.
Minor point of accuracy: Mac Pro and current iMac models have socketed processors, and thus can be upgraded. This procedure is not endorsed by Apple, and would thus void your warranty (if your example still carries a warranty). On the Mac Pro it is a fairly straightforward process, but certainly not so easy on the iMac.

Similar Messages

  • Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

    I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
    I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
    So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
    Thanks

    Allan Eckert wrote:
    Hi GrainFocuser;
    Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
    You might have better success with your alternatives if you post over on the server forum instead of here.
    Allan
    Message was edited by: Allan Eckert
    Allan, thanks.
    It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
    In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
    So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
    I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
    So, again... Any options from OS X Server Admins out there?

  • 2010 Mac Mini OS 10.10.1 screen is stretched out

    Hi,
    I have a 2010 Mac Mini that I use at work and I also use a second monitor via an adapter through USB. The setup worked until I installed Yosemite (10.10.1) on Friday.
    When I go to Settings / Displays I don't get all the resolution options I had before (for my main monitor, 20", res. 1680 x 1050) and my secondary monitor isn't recognized at all (as if it wasn't even connected).
    This is my main monitor: http://www.pcworld.com/product/1417007/lg-l203wt-widescreen-lcd-monitor.html
    I've tried resetting the PRAM but that didn't work. I'm a designer and I can't work with my screen stretched out.
    Can anyone let me know if there is a way to fix this???
    Thanks in advance!

    Look for update software for the USB video adopter.
    The 2010 mini has an HDMI video adopter and came with a HDMI to DVI adopter, It also has a mini displayport video output. You can get an adopter to connect HDMI, DVI and VGA,
    Mini DisplayPort with support for up to 2560-by-1600 resolution
    HDMI port with support for up to 1920-by-1200 resolution
    DVI output using HDMI to DVI Adapter (included)
    VGA output using Mini DisplayPort to VGA Adapter (sold separately)
    Support for extended desktop and video mirroring across both ports

  • 2010 mac mini RAM error

    I have a 2010 mac mini and it is displaying that I only have 1gb of ram, but it should display that I have 2gb. Please help!!

    Do a proper shut down from the apple menu
    Then flip the mini upside down and open the bottom cover
    check and see if there are 2 ram DIMMs installed
    if there are, I would take them out and swap their positions
    http://www.youtube.com/watch?v=m5uvIBpTSaQ
    Then do a pram zap by holding down these keys on power on:
    COMMAND OPTION P R

  • 2010 mac mini Home cinema sound and Home cinema headphones

    Hello
    im waiting for my 2010 mac mini to arrive,
    ive experience with home cinema setups in the past.
    Im looking to use my mac mini as a home cinema set up.
    Im fine with the visual side ( projectors and hdtv).
    The audio.
    How on earth do i get home cinema sound into headphones.
    due to where i live, headphones are the only option i have ( neighbours dont like noise.)
    ive tried :-
    sony mdr-drs7100
    Pioneer SE-DRS3000c
    pioneer dir-8000c.
    the three above are ok as they have home cinema audio processing built in and worked with the optical digital output fine.
    bass on the above 3 is weak.
    i aso will prefer a wired set of headphones ( had enough of wireless)
    im now looking at another route.
    1) a decent headphone amplifier capable of playing DTS and Dolby digital 5.1
    2) decent set of headphones to handle the above.
    anyone any setups they can share that work
    many thanks

    Hey David,
    My issue was resolved by ensuring that I was using a PAL resolution and frequency (720p @ 50 Hz or 1080p @ 50 Hz) for my PAL TV. Anything else causes audio stuttering through my HDMI cable.
    Don't ask me why. Try this on your setup by using only the one of your TV's native resolutions and frequencies (Should say NTSC Television on every native TV resolution if you are in the US, PAL Television in Europe). If you do have an NTSC TV, then you might be able to use all of the 60 Hz frequency resolutions without HDMI audio out problems, but I wouldn't count on it.
    From what I've researched on the issue, it is only TV's that have this problem, and it is a strange one, as it is actually a  display setting problem with an audio error symptom.

  • Audio issues on Mid-2010 Mac mini upgraded to Lion

    I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
    Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
    I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!

    You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • Cannot select 5.1 surround in Midi Setup on 2010 Mac Mini

    Hi all,
    I have tried searching around the net to answer this question but nothing seems like a concrete answer.
    2010 Mac Mini connected via HDMI to...
    Sony 55NX720 3D TV which is connected VIA HDMI (return audio) and Toslink Digital Audio to...
    Sony Home Theater DAV-DZ840K which outputs in 5.1
    However, when using Audio Midi Setup on OSX Lion, there is no way for me to tell the Mini to output in 5.1, the only options i get a 2channel. What is weird though, is if I use a program called Plex and tell it to output in 5.1 then it does.
    So why will OSX itself not allow me to tell it to output in 5.1? I can't use plex for everything, and other programs such as Bino don't have a setting to tell it what to output.
    Thanks

    Hello,
    Don't know if you have found the solution already but I decided to post a solution that helped me.
    I am not using Mac Mini but a MacBook Pro mid 2010 model. Anyway, I found the solution from this thread which is from people having the same problem with Lion. I used on my Mountain Lion and it fixed the problem for me.
    So, in short:
    1. Go to the Audio MIDI Setup from Utilities
    2. Select the device you want to use
    3. Change the Formet from "2ch-16bit Integer" to "6ch-16bit Integer"
    4. Now you should be able to change from stereo to 5.1
    In the other thread there were different choises in the Format section, but those were the ones that I had. Anyway changing this Format settings fixed the problem for me since I can now see and select the 5.1 option as well.
    Hope that helps

  • Airdrop - Mid 2010 Mac Mini - Upgraded to OS X Yosemite

    I upgraded my Mid 2010 Mac Mini to Yosemite yesterday and thought I'd try using Airdrop to send a file to my almost brand new IPad with OS 8. Airdrop is listed in Finder on my Mac Mini but when I open it it doesn't find my iPad but the screen states "Airdrop let's you share instantly with people nearby. To share with someone using a Mac, ask them to go to Airdrop in the Finder".  If alternatively I right click on a document in Finder and select 'share' the Airdrop option is there but greyed out and if I click on Airdrop a message appears stating "To share with someone using a Mac, ask them to go to Airdrop in the Finder" - no mention of what to do if you want to share with an iPad. I have Bluetooth and Wi-Fi switched on on both devices and have the Airdrop status set to Everyone on the iPad.  On the Mac Mini in settings - extensions - share menu, the Airdrop box is white with black tick whereas other tick boxes are blue with a white tick. Does all this mean that my Mac Mini even with Yosemite can't operate Airdrop at all or maybe only with another Mac (maybe it's too old)? Or maybe I'm missing something?

    You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

  • Apple Store purchase being downgraded by new 2010 mac mini 4GB - 2GB

    Placed order for mac mini with 4GB RAM option just before the new (2010) mac mini announced. Apple kindly advised I'll be getting the new 2010 mac mini - but with 2GB of RAM - no change to pricing AUD 1100.
    Love the new 2010 mini.
    I like my workstation to be as low wattage as possible - but with heaps of RAM. I multi-task to be efficient.
    Guess I'll be able to slot 8GB in myself, but would prefer to start with 4GB - it might just be enough.

    Welcome to Apple Discussions.
    If your new Mac mini has not shipped, consider calling Apple to upgrade to 4 GB and I suspect you’ll be fine.

  • I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

    I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

    The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • 2010 mac mini - monitor goes dark every few sec's problems since Mavericks Install

    My Wife updated her 2010 Mac mini from Mountain Lion to Mavericks and ever since, after start, up the display  intermittently flashes a dark screen, every few seconds.  (within 3-10 seconds or so, there will be another period of dark screen, that may last aprox. 1- 6 seconds.  The timing of this changes constantly.  The finder and all apps I have seen are affected in the same way. it seems to be an all-the-time problem
    the monitor is an OptiQuest Q9, and the system connects via an Apple mini display to VGA adapter (supplied with the mac mini) , then a vga cord into the monitor, which has a native resolution of 1280 x 1024.   
    The only workaround we have found is to boot the mac with the monitor cable disconnected, then reconnect the monitor cable after boot up is complete. In that case, the monitor does not flash, until the mac is shutdown or restarted again.
    Steps I have already tried:
    Zapped P-Ram 
    Reset SMC (shutdown, waited with power unplugged, then reattached power and  rebootted
    Repaired disk permissions,
    repaired disk
    re-download and reinstalled mavericks fresh.
    changed display prefs for resolution, detected displays, etc. 
    Changed background picture.
    I don't know where to go with this anymore, and it has already taken a lot of time.
    Who's got a Fix?    And if there is no fix, how do I revert from Mavericks to Mountain Lion?   The mac mini came with Snow Leopoard.

    Problem Fixed!
    I found another page that referred to resetting the PMU (http://support.apple.com/kb/ht2183) , which controls things like wake and sleep:
    "If the settings in the PMU become corrupted, it can result in operational anomalies such as your computer not turning on, not displaying video, or not waking from sleep, among other things. In these situations, you may need to reset your computer's PMU."
    Anyway, it is pracitcally the same proceedure as resetting the SMC (SMC reset=  Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
    but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
    After this the display problem was fixed, but the fan ran at high speed, so I did one more SMC reset as described above. Now everything is in order.   This also fixed the issue of the mac mini not waking from sleep unless the power/sleep button on the mini was pressed (it wasn't responding to the keyboard to awaken). Now it's all good.
    Hope this helps somebody else... 

  • Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

    Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media?  I have not figured this out.  Here's what I have observed:
    I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
    An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts.  A USB stick formatted as described does not appear in th boot menu at all.
    An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
    Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
    Thanks.

    The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
    I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
    I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
    I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD.  It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

  • Can I replace the optical drive on a 2010 mac mini with a second hard drive?

    i was just wandering how easy it would be (if at all) to replace the optical drive on my 2010 Mac Mini with a second hard drive
    we use it as a media server only, and the DVD is almost never used

    http://eshop.macsales.com/shop/drive_bracket/datadoubler/

  • Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

    I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
    1) After starting up, I get the usual gray screen with Apple logo.
    2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
    3) I follow this instruction, but get the same dialogue box over and over agin.
    Any ideas?
    Thanks and best wishes.

    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Maybe you are looking for